In Situ Growth of Tetrametallic FeCoMnNi-MOF-74 on Nickel Foam as Efficient Bifunctional Electrocatalysts for the Evolution Reaction of Oxygen and Hydrogen

Petal-like high-entropy metal-organic framework grown on nickel foam as a bifunctional electrocatalyst for efficient overall water splitting

The rapid advancement of global industrialization in the 21st century has exacerbated energy crises and environmental degradation, driving an urgent demand for efficient, renewable, and sustainable energy technologies. High-entropy metal-organic frameworks (HE-MOFs), owing to their structural diversity and tunability, have emerged as promising electrocatalytic materials. In this study, a series of metal-organic frameworks were synthesized via hydrothermal methods using 4,4'-dihydroxy-3,3'-biphenyldicarboxylic acid (H4DOBPDC) as the organic linker. The resulting HE-DOBPDC material, featuring a unique petal-like morphology, demonstrated excellent catalytic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). As a bifunctional catalyst for overall water splitting, HE-DOBPDC achieved a current density of 10 mA cm-2 at a low applied voltage of 1.56 V and maintained stable performance over 120 h without significant degradation. Comprehensive analyses using Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and in-situ Raman spectroscopy revealed that the formation of Fe-OOH, Ni-OOH and Co-OOH intermediates during electrolysis likely contributed to its superior catalytic performance. This work offers valuable insights for designing cost-effective, highly-performance active catalytic materials for water electrolysis applications.

Machine-Learning-Assisted Synthesis of Bimetallic Metal-Organic Frameworks for the Optimized Oxygen Evolution Reaction

Although a wide range of bimetallic metal-organic frameworks (MOFs) have been reported as electrocatalysts for the oxygen evolution reaction (OER), there is still a need for precise tuning of the metal precursors and composite ratios to minimize the overpotential and design highly efficient electrocatalysts. To achieve this, we applied machine learning (ML) algorithms to optimize the metal precursor and composite ratios, identifying the key factors that govern the OER performance. We first synthesized a bimetallic FeCo squarate-based MOF (FeCo-Sq MOF) using a solvothermal method and then optimized the metal precursor ratios using ML algorithms to achieve a low overpotential. To further enhance the OER efficacy, the ML-optimized FeCo-Sq MOF was coated with S-doped graphitic carbon nitride (SCN) and wrapped with polydopamine (PDA). The PDA wrapping not only increased the number of binding/adsorption sites for -OH but also enhanced the stability, charge/electron transfer kinetics, and effective anchoring of SCN on the MOF surface. To obtain optimal OER catalysts, the SCN loading was further fine-tuned through ML. The ML-optimized PDA-SCN@FeCo-Sq MOF exhibited high electrocatalytic performance, achieving a low overpotential of 310 mV and a Tafel slope of 56 mV/dec at a current density of 10 mA cm-2 in 1 M KOH. This study presents a promising ML-assisted strategy for designing high-performance PDA-SCN@FeCo-Sq MOF electrocatalysts for efficient water splitting.

Manganese-Based Metal-Organic Frameworks and Their Derivatives for Electrochemical Water Splitting: Recent Advances and Future Outlook

Metal-organic frameworks (MOFs) and their derivatives have recently attracted significant interest as promising candidates in water splitting due to their well-defined structural and electronic features, three-dimensional architecture, high surface area, abundance of active sites, remarkable stability, and improved capabilities for mass transport and diffusion. Mn-based MOFs and their derivatives have been extensively studied and demonstrated significant potential in water splitting, inspired largely by the natural photosystem-II. Despite the development of numerous Mn-based electrocatalysts, Mn-MOFs stand out due to their strong synergistic interactions, tunable electronic properties, efficient charge and mass transfer, and straightforward synthesis. However, recent reviews on MOFs have largely overlooked the specific advancements in Mn-MOFs and their derivatives for water-splitting applications. By providing an overview of the uses of Mn-MOFs and their materials, this article seeks to close that gap. It looks at their stability, porosity, and structure as well as how they are used in water splitting. This study offers a deeper knowledge of the properties and uses of Mn-MOFs and their related materials by drawing on groundbreaking research. The link between structure, property, and performance is examined, current advancements in the subject are discussed, difficulties faced are addressed, and potential future developments are taken into account.

Decoding the Hume-Rothery Rule in a Bifunctional Tetra-metallic Alloy for Alkaline Water Electrolysis

The 90-year-old Hume-Rothery rule was adapted to design an outstanding bifunctional tetra-metallic alloy electrocatalyst for water electrolysis. Following the radius mismatch principles, Fe (131 pm) and Ni (124 pm) are selectively incorporated at the Pd (139 pm) site of Mo0.30Pd0.70 nanosheets. Analogously, Cu (132 pm) alloys with only Pd, while Ag (145 pm) alloys with both Pd and Mo (154 pm). The face-centered cubic Mo0.30Pd0.35Ni0.23Fe0.12 nanosheets with 10-12 atomic layers, featuring in-plane compressive strain along the {111} basal plane, show 1/3 (422) reflection from local hexagonal symmetry. The more electronegative Pd attracts electron density from Ni/Fe in Mo0.30Pd0.35Ni0.23Fe0.12, synergistically boosting the mass activities for hydrogen and oxygen evolution reactions to 89 ± 5 and 38.6 ± 3.1 A g-1 at ±400 mV versus RHE, respectively. Full water electrolysis continues for ≥550 h, requiring cell voltages of 1.51 and 1.63 V at 10 and 100 mA cm-2, delivering 45 mL h-1 green H2.

Mechanochemical Synthesis of High-Entropy MOF-74 with Multiple Active Sites for CO2 Adsorption and Synergistic Conversion

Compared with monometallic metal-organic frameworks (MOFs), the synergistic effect of multiple metals significantly enhances the catalytic performance of the CO2 cycloesterification reaction, leading to improved CO2 adsorption and catalytic conversion capabilities. To investigate this concept, a high-entropy MOF-74 (HE-MOF-74) with a uniform distribution of five distinct metal ions (Zn2+, Mg2+, Ni2+, Co2+, and Cu2+) was successfully synthesized using a straightforward mechanical ball milling technique and comprehensively characterized (including structural, morphological, and physicochemical properties). The results reveal that HE-MOF-74 exhibits significantly increased specific surface area and CO2 adsorption capacity compared with those of monometallic MOF-74. The presence of multiple unsaturated metal centers as Lewis acid sites, oxygen atoms linking the metals, and ligand-based hydroxyl groups serving as base sites enable efficient immobilization of CO2 into cyclic carbonate. This study introduces a novel synthetic approach for the green and efficient production of HE-MOF-74 and proposes a new application for CO2 utilization.

Rational Construction of Co4(μ-O)6(COO)6 SBU-Based MOFs through Mixed-Ligand Strategy to Enhance Electrocatalytic Oxygen Evolution Performance

Metal-organic frameworks (MOFs) are increasingly becoming an important choice for developing robust and efficient electrocatalysts; therefore, exploring the relationship between the structure, catalytic activity, and stability of MOFs is of great significance. MOFs 1-3 with different spatial configurations are designed and synthesized based on linear pyridine ligands, tetragonal carboxylic acid ligands, and triangular carboxylic acid ligands, while MOF 4 displays a three-dimensional (3D) supramolecule assembled through a mixed-ligand strategy. Compared with MOFs 1-3, MOF 4 has the lowest overpotential of 106 mV (at 10 mA·cm-2) and a Tafel slope of 80.9 mV·dec-1, as well as sturdy long-term stability in the process of oxygen evolution reaction (OER). The presence of dense metal clusters and μ3-O promotes the optimal catalytic performance of MOF 4. Density functional theory (DFT) calculations of MOF 4 demonstrate that the process from O* to OOH* is the rate-determining step. This investigation further reveals the relationship between MOF structural composition and electrocatalytic OER performance and provides an effective strategy for the assembly of MOF-based electrocatalysts.

Multi-metallic MOF based composites for environmental applications: synergizing metal centers and interactions

The escalating threat of environmental issues to both nature and humanity over the past two decades underscores the urgency of addressing environmental pollutants. Metal-organic frameworks (MOFs) have emerged as highly promising materials for tackling these challenges. Since their rise in popularity, extensive research has been conducted on MOFs, spanning from design and synthesis to a wide array of applications, such as environmental remediation, gas storage and separation, catalysis, sensors, biomedical and drug delivery systems, energy storage and conversion, and optoelectronic devices, etc. MOFs possess a multitude of advantageous properties such as large specific surface area, tunable porosity, diverse pore structures, multi-channel design, and molecular sieve capabilities, etc., making them particularly attractive for environmental applications. MOF-based composites inherit the excellent properties of MOFs and also exhibit unique physicochemical properties and structures. The tailoring of central coordinated metal ions in MOFs is critical for their adaptability in environmental applications. Although many reviews on monometallic, bimetallic, and polymetallic MOFs have been published, few reviews focusing on MOF-based composites with monometallic, bimetallic, and multi-metallic centers in the context of environmental pollutant treatment have been reported. This review addresses this gap by providing an in-depth overview of the recent progress in MOF-based composites, emphasizing their applications in hazardous gas sensing, electromagnetic wave absorption (EMWA), and pollutant degradation in both aqueous and atmospheric environments and highlighting the importance of the number and type of metal centers present. Additionally, the various categories of MOFs are summarized. MOF-based composites demonstrate significant promise in addressing environmental challenges, and this review provides a clear and valuable perspective on their potential in environmental applications.

Designable immobilization of D-allulose 3-epimerase on bimetallic organic frameworks based on metal ion compatibility for enhanced D-allulose production

D-allulose, a low-calorie rare sugar catalyzed by D-allulose 3-epimerase (DAE), is highly sought after for its potential health benefits. However, poor reusability and stability of DAE limited its popularization in industrial applications. Although metal-organic frameworks (MOFs) offer a promising enzyme platform for enzyme immobilization, developing customized strategies for MOF immobilization of enzymes remains challenging. In this study, we introduce a designable strategy involving the construction of bimetal-organic frameworks (ZnCo-MOF) based on metal ions compatibility. The DAE@MOFs materials were prepared and characterized, and the immobilization of DAE and the enzymatic characteristics of the MOF-immobilized DAE were subsequently evaluated. Remarkably, DAE@ZnCo-MOF exhibited superior recyclability which could maintain 95 % relative activity after 8 consecutive cycles. The storage stability is significantly improved compared to the free form, with a relative activity of 116 % remaining after 30 days. Molecular docking was also employed to investigate the interaction between DAE and the components of MOFs synthesis. The results demonstrate that the DAE@ZnCo-MOF exhibited enhanced catalytic efficiency and increased stability. This study introduces a viable and adaptable MOF-based immobilization strategy for enzymes, which holds the potential to expand the implementation of enzyme biocatalysts in a multitude of disciplines.

Development of a magnetic nanocomposite sorbent (NiCoMn/Fe3O4@C) for efficient extraction of methylene blue and Auramine O

A rapid and efficient method for the simultaneous monitoring and recovery of Auramine O (AO) and Methylene Blue (MB) dyes from water samples is presented. This method, named ultrasound-assisted dispersive-magnetic nanocomposites-solid-phase microextraction (UA-DMN-μSPE), utilizes NiCoMn/Fe3O4@C composite sorbents. Response surface methodology (RSM) combined with artificial neural networks (ANN) and generalized regression artificial neural network (GRNN) under central composite design (CCD) was employed to optimize various parameters for efficient extraction, followed by further refinement using desirability function analysis (DFA) and genetic algorithms (GA). Under optimized conditions, the method achieved exceptional recovery rates (99.5 ± 1.2% for AO and 99.8 ± 1.1% for MB) with acetone as the eluent. Additionally, a high preconcentration factor of 45.50 and 47.30 for AO and MB, respectively, was obtained. Low detection limits of 0.45 ng mL⁻1 (AO) and 1.80 ng mL⁻1 (MB) were achieved with wide linear response ranges (5-1000 and 5-2000 ng mL⁻1 for AO and MB, respectively). The method exhibited good stability with RSDs below 3% for five recycling runs, and minimal interference from various ions was observed. This UA-DMN-μSPE-UV/Vis method offers significant advantages in terms of efficiency, preconcentration, and detection limits, making it a valuable tool for the analysis of AO and MB in water samples.

Enhanced Electrocatalytic Oxygen Evolution by In Situ Growth of Tetrametallic Metal-Organic Framework Electrocatalyst FeCoNiMn-MOF on Nickel Foam

Developing highly efficient, cost-effective, non-noble-metal-based electrocatalysts with superior performance and stability for oxygen evolution reactions is of immense challenge as well as great importance for the upcoming sustainable and green energy conversion technologies. The multivariate metal-organic frameworks with hierarchical porous structures and unsaturated coordination modes are considered to be promising emerging energy materials. In this work, a series of multimetallic MOFs were directly grown on nickel foam (NF) through the solvothermal method. Notably, the optimized tetrametallic FeCoNiMn-MOF/NF shows a low overpotential of 239 mV to achieve a current density of 50 mA cm-2 with a Tafel slope of 62.05 mV dec-1 for OER in 1 M KOH. It also exhibits excellent stability and durability over 100 h in chronoamperometric studies. The enhanced performance is closely tied to the high activity of iron and nickel ions and the decomposed and reconstructed Ni/Fe-OOH intermediates of the FeCoNiMn-MOF/NF during the OER process, which are revealed by XPS analysis and in situ Raman spectroscopy. This present work demonstrates the feasibility and advantage of utilizing highly efficient and durable multimetallic MOFs for electrocatalytic oxygen evolution.

Electrostatic co-assembly of FePS3 nanosheets and surface functionalized BCN heterostructures for hydrogen evolution reaction

Advances in the hydrogen evolution reaction (HER) are intricately connected with addressing the current energy crisis and quest for sustainable energy sources. The necessity of catalysts that are efficient and inexpensive to perform the hydrogen evolution reaction is key to this. Following the ground-breaking discovery of graphene, metal thio/seleno phosphates (MPX3: M - transition metal, P - phosphorus and X - S/Se), two dimensional (2D) materials, exhibit excellent tunable physicochemical, electronic and optical properties, and are expected to be key to the energy industry for years to come. Taking this into account, a facile time-effective electrostatic restacking synthesis procedure has been followed to synthesize a 2D/2D heterostructure (FePS3@BCN) involving FePS3, one of the prominent MPX3 materials, with borocarbonitride (BCN), for hydrogen evolution reaction (HER). The piled up nanosheets of FePS3 and BCN are held together by an electrostatic force, and display extreme robustness under the harsh conditions of HER application. The amalgamated electrocatalyst achieved an overpotential of 187 mV at a current density of 10 mA cm-2 with a shallow Tafel slope of 41 mV dec-1, following the Volmer-Heyrovsky mechanism. The resilience of the electrocatalyst has been examined through chronoamperometric testing for long term stability, and it is stable for more than 14 hours, which shows the excellent electrocatalytic activity for hydrogen evolution reaction owing to the strategic approach to the catalyst design, the use of numerous electrochemically active sites, large surface area and a barrier-free channel for quick ion transfer.

Fabrication of ternary NiCoMoOx with yolk-shell hollow structure as a positive electrode material for high-performance electrochemical capacitor applications

Although the fabrication of hollow nanostructures from single and binary transition metal oxides has been accomplished effectively, there still exists a significant challenge in creating advanced hollow morphologies comprising mixed transition metal oxides such as ternary and quaternary compositions. In this context, we have adopted an alternative approach by employing a straightforward self-templating method to synthesize ternary metal molybdate nanomaterials. These materials possess the chemical composition of NiCoMoOx and exhibit a unique nanoporous yolk-shell hollow structure. Commencing with mixed metal-glycerate solid spheres, we have successfully guided the formation of this chemical composition and distinctive yolk-shell hollow sphere architecture through meticulous thermal treatment control. The consistency of our results is confirmed through SEM images. Thanks to their robust structural integrity, advanced internal morphology, and increased surface area, these hierarchical hollow spheres demonstrate remarkable electrochemical performance when utilized as advanced electrode materials for supercapacitors. When serving as electrode materials in supercapacitors, these nanoporous NiCoMoOx yolk-shell hollow spheres deliver a specific capacitance of 1125 F g-1 at a current density of 0.5 A g-1, maintaining an impressive cycling stability of 91.48% even after 5000 cycles. In a hybrid device configuration wherein activated carbon (AC) functions as the negative electrode and NiCoMoOx yolk-shell hollow spheres serve as the positive electrode, exceptional performance is observed. This configuration achieves a substantial specific energy density of 44.67 W h kg-1, alongside a maximum power density of 8000 W kg-1, and exceptional cycling stability of 93.03% even after 5000 cycles.

Synthesis of a Co/Ni-MOF-74@PDI Z-scheme photocatalyst as a highly efficient photo-assisted Fenton-like catalyst for the removal of chlortetracycline hydrochloride

In this paper, ultra-thin nanofiber PDI was obtained by self-assembly dispersion of commercial PDINH. A novel Co/Ni-MOF-74@PDI Z-scheme heterojunction photocatalyst material was constructed by a simple solvothermal method. XRD, SEM, TEM, FT-IR and other characterization techniques proved the successful preparation of the Co/Ni-MOF-74@PDI Z-scheme heterojunction photocatalyst material. By degrading chlortetracycline hydrochloride, it was found that the photocatalytic activity of Co/Ni-MOF-74@PDI was much higher than that of pure Co/Ni-MOF-74 and PDI. Subsequently, Co/Ni-MOF-74@PDI was used to activate H2O2 to further improve the degradation efficiency of chlortetracycline hydrochloride. It was found that the photocatalytic performance was greatly improved after the addition of 19.6 mM H2O2 to the system, and the degradation rate of chlortetracycline hydrochloride was 87% within 90 min. The electron transfer pathway and H2O2 activation mechanism of the Co/Ni-MOF-74@PDI composite photocatalyst were proved by free radical quenching experiments, electron paramagnetic resonance analysis and X-ray electron spectroscopy. Finally, the easy exfoliation point and degradation pathway of chlortetracycline hydrochloride were studied using density functional theory, UPLC-MS and toxicity evaluation software. It was found that the main active substances were h+, ˙O2, 1O2 and ˙OH, and the toxicity of chlortetracycline hydrochloride and its intermediates was evaluated.

(FeMnCe)-co-doped MOF-74 with significantly improved performance for overall water splitting

Developing inexpensive electrocatalysts with high activity and stability is of great value for overall water splitting. In this work, we designed a series of 3d-4f (FeMnCe)-trimetallic MOF-74 with different ratios of 3d- and 4f-metal centers. Among them, FeMn6Ce0.5-MOF-74/NF exhibited the best electrocatalytic performance for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in an alkaline solution. It only requires a low overpotential of 281 mV@100 mA cm-2 for OER and 186 mV@-10 mA cm-2 for HER in 1 M KOH. With FeMn6Ce0.5-MOF-74/NF as the anode and cathode in the overall water splitting system, only 1.65 V is needed to deliver a current density of 10 mA cm-2. In particular, for the as-fabricated FeMn6Ce0.5-MOF-74/NF||Pt/C cell unit, only 1.40 V is needed to achieve 10 mA cm-2. Therefore, the successful design of 3d-4f mixed-metallic MOF-74 provides a new viewpoint to develop highly efficient non-precious metal electrocatalysts.

Si-Cr Nano-Alloys Fabricated by Direct Femtosecond Laser Writing

Ultra-short 230 fs laser pulses of 515 nm wavelength were tightly focused into 700 nm focal spots and utilised in opening ∼400 nm nano-holes in a Cr etch mask that was tens-of-nm thick. The ablation threshold was found to be 2.3 nJ/pulse, double that of plain silicon. Nano-holes irradiated with pulse energies below this threshold produced nano-disks, while higher energies produced nano-rings. Both these structures were not removed by either Cr or Si etch solutions. Subtle sub-1 nJ pulse energy control was harnessed to pattern large surface areas with controlled nano-alloying of Si and Cr. This work demonstrates vacuum-free large area patterning of nanolayers by alloying them at distinct locations with sub-diffraction resolution. Such metal masks with nano-hole opening can be used for formation of random patterns of nano-needles with sub-100 nm separation when applied to dry etching of Si.

In Situ Grown Mn(II) MOF upon Nickel Foam Acts as a Robust Self-Supporting Bifunctional Electrode for Overall Water Splitting: A Bimetallic Synergistic Collaboration Strategy

The design of highly efficient, cost-effective non-noble metal-based electrocatalysts with superior stability for overall water splitting (OWS) reactions is of great importance as well as of immense challenge for the upcoming sustainable and green energy conversion technologies. Herein, a convenient and simple in situ solvothermal method has been adopted to fabricate a self-supported, binder-free 3D electrode (Mn-MOF/NF) by the direct growth of a newly synthesized carboxylate-based pristine Mn(II)-metal-organic framework (Mn-MOF) upon the conducting substrate nickel foam (NF). The binder-free Mn-MOF/NF electrode exhibits excellent performances toward OWS with ultralow overpotentials of 280 mV@20 mA cm^-2 for the oxygen evolution reaction (OER) and 125 mV@10 mA cm^-2 for the hydrogen evolution reaction (HER) with remarkable durability. Mn-MOF/NF can also attain a current density of 10 mA cm^-2 with a low cell voltage of 1.68 V in a 0.1 M KOH solution in a two-electrode system for OWS. The direct growth of nonconducting electroactive Mn-MOF materials upon conducting substrate NF provides an excellent mass transport of the electrolyte with a relatively low contact resistance due to the strong catalyst-substrate contact and enhances the efficient electron transport for OWS. The redox chemical etching of the self-sacrificial substrate NF during solvothermal synthesis introduces redox-active Ni²⁺ in Mn-MOF/NF. Thus, the excellent OWS electrocatalytic activity can mainly be attributed to the bimetallic synergistic collaboration of the two redox active metal centers (Mn²⁺ and Ni²⁺) along with the excellent support surface of NF, which provides a high specific surface area and maximum utilization of the electroactive metal ion sites by preventing the self-aggregation of the active sites. The Mn-MOF/NF electrode also exhibits superb stability and durability for a prolonged time throughout the multiple cycles of full water splitting reactions. Therefore, this work elucidates a convenient and smart approach for constructing MOF-based bifunctional electrocatalysts for OWS.

In Situ Synthesis of MOF-74 Family for High Areal Energy Density of Aqueous Nickel-Zinc Batteries

Limited by single metal active sites and low electrical conductivity, designing nickel-based metal-organic framework (MOF) materials with high capacity and high energy density remains a challenge. Herein, a series of bi/multimetallic MOF-74 family materials in situ grown on carbon cloth (CC) by doping M^x+ ions in Ni-MOF-74 is fabricated: NiM-MOF@CC (M = Mn²⁺ , Co²⁺ , Cu²⁺ , Zn²⁺ , Al³⁺ , Fe³⁺ ), and NiCoM-MOF@CC (M = Mn²⁺ , Zn²⁺ , Al³⁺ , Fe³⁺ ). The type and ratio of doping metal ions can be adjusted while the original topology is preserved. Different metal ions are confirmed by X-ray absorption fine structure (XAFS). Furthermore, these Ni-based MOF electrodes are directly utilized as cathodes for aqueous nickel-zinc batteries (NZBs). Among all the as-prepared electrodes, NiCo-MOF@CC-3 (NCM@CC-3), with an optimized Co/Ni ratio of 1:1, exhibits the best electrical conductivity, which is according to the density functional theory (DFT) theoretical calculations. The NCM@CC-3//Zn@CC battery achieves a high specific capacity of 1.77 mAh cm^-2 , a high areal energy density of 2.97 mWh cm^-2 , and high cycling stability of 83% capacity retention rate after 6000 cycles. The synthetic strategy based on the coordination effect of metal ions and the concept of binder-free electrodes provide a new direction for the synthesis of high-performance materials in the energy-storage field.

Carbonaceous Oxygen Evolution Reaction Catalysts: From Defect and Doping-Induced Activity over Hybrid Compounds to Ordered Framework Structures

Oxygen evolution reaction (OER) is expected to be of great importance for the future energy conversion and storage in form of hydrogen by water electrolysis. Besides the traditional noble-metal or transition metal oxide-based catalysts, carbonaceous electrocatalysts are of great interest due to their huge structural and compositional variety and unrestricted abundance. This review provides a summary of recent advances in the field of carbon-based OER catalysts ranging from "pure" or unintentionally doped carbon allotropes over heteroatom-doped carbonaceous materials and carbon/transition metal compounds to metal oxide composites where the role of carbon is mainly assigned to be a conductive support. Furthermore, the review discusses the recent developments in the field of ordered carbon framework structures (metal organic framework and covalent organic framework structures) that potentially allow a rational design of heteroatom-doped 3D porous structures with defined composition and spatial arrangement of doping atoms to deepen the understanding on the OER mechanism on carbonaceous structures in the future. Besides introducing the structural and compositional origin of electrochemical activity, the review discusses the mechanism of the catalytic activity of carbonaceous materials, their stability under OER conditions, and potential synergistic effects in combination with metal (or metal oxide) co-catalysts.

Metal-Organic Frameworks-Derived Self-Supported Carbon-Based Composites for Electrocatalytic Water Splitting

Electrocatalytic water splitting has been considered as a promising strategy for the sustainable evolution of hydrogen energy and storage of intermittent electric energy. Efficient catalysts for electrocatalytic water splitting are urgently demanded to decrease the overpotentials and promote the sluggish reaction kinetics. Carbon-based composites, including heteroatom-doped carbon materials, metals/alloys@carbon composites, metal compounds@carbon composites, and atomically dispersed metal sites@carbon composites have been widely used as the catalysts due to their fascinating properties. However, these electrocatalysts are almost powdery form, and should be cast on the current collector by using the polymeric binder, which would result in the unsatisfied electrocatalytic performance. In comparison, a self-supported electrode architecture is highly attractive. Recently, self-supported metal-organic frameworks (MOFs) constructed by coordination of metal centers and organic ligands have been considered as suitable templates/precursors to construct free-standing carbon-based composites grown on conductive substrate. MOFs-derived carbon-based composites have various merits, such as the well-aligned array architecture and evenly distributed active sites, and easy functionalization with other species, which make them suitable alternatives to non-noble metal-included electrocatalysts. In this review, we intend to show the research progresses by employment of MOFs as precursors to prepare self-supported carbon-based composites. Focusing on these MOFs-derived carbon-based nanomaterials, the latest advances in their controllable synthesis, composition regulation, electrocatalytic performances in hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and overall water splitting (OWS) are presented. Finally, the challenges and perspectives are showed for the further developments of MOFs-derived self-supported carbon-based nanomaterials in electrocatalytic reactions.

Nanoporous ultra-high-entropy alloys containing fourteen elements for water splitting electrocatalysis

High-entropy alloys (HEAs) are near-equimolar alloys comprising five or more elements. In recent years, catalysis using HEAs has attracted considerable attention across various fields. Herein, we demonstrate the facile synthesis of nanoporous ultra-high-entropy alloys (np-UHEAs) with hierarchical porosity via dealloying. These np-UHEAs contain up to 14 elements, namely, Al, Ag, Au, Co, Cu, Fe, Ir, Mo, Ni, Pd, Pt, Rh, Ru, and Ti. Furthermore, they exhibit high catalytic activities and electrochemical stabilities in the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in acidic media, superior to that of commercial Pt/graphene and IrO₂ catalysts. Our results offer valuable insights for the selection of elements as catalysts for various applications.

Crystal structure of tetrakis(μ-naphthalene-1-carboxylato-κ 2 O,O′)bis(methanol)copper(II), C46H36Cu2O10

C46H36Cu2O10, monoclinic, C2/c (no. 15), a = 32.663(7) Å, b = 7.4214(15) Å, c = 21.785(4) Å, β = 131.68(3)°, V = 3944.0(19) Å3, Z = 4, R gt (F) = 0.0478, wRref (F 2) = 0.1583, T = 295 K.