Surface Reconstruction of Co4N Coupled with CeO2 toward Enhanced Alkaline Oxygen Evolution Reaction

Sonication strategy for anchoring single metal atom oxides (W, Cu, Co) on CeO2-rGO for boosting electrocatalytic oxygen evolution reaction

In the field of electrocatalysis, single-atomic-layer tungsten, copper, and cobalt oxide on CeO2, ethylene diamine (ED) and reduced graphene oxide (rGO) supported materials shows tremendous potential. Despite the enormous interest in single metal atom oxide (SMAO) catalysts, it is still very difficult to directly convert readily available bulk metal oxide into single atom oxide. It is crucial and tough to create high performance materials for the oxygen evolution reaction (OER) in an alkaline environment. Herein, a single tungsten, copper and cobalt atom oxide (SMAO) anchored on the CeO2 atomic layer and overall components deposited on the rGO (rGO-ED-CeO2-WCuCo) is prepared through a one-pot sonication technique. The presence of SMAO is identified by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) imaging. The electrocatalytic performance of final rGO-ED-CeO2-WCuCo-30 nanocomposite for the OER in 1 M KOH electrolyte is evidenced by providing low overpotential of 283 mV at 10 mA cm-2. The Tafel slope for OER using rGO-ED-CeO2-WCuCo-30 electrocatalysts is 57.03 mV dec-1. The electrocatalytic activity of rGO-ED-CeO2-WCuCo-30 nanocomposites for OER was noticeably increased when compared to bare CeO2 nanorods (401 mV), rGO-ED-CeO2-WCo-30 (345 mV), rGO-ED-CeO2-WCu-30 (340 mV) and rGO-ED-CeO2-WCuCo-20 (321 mV) samples.

Reconstruction of CoNx /NC Catalyst during Oxygen Evolution Reaction by Fe3+ Modulation for Enhanced Activity and Stability

The surface reconstruction of transition metal-based catalysts has been demonstrated to be beneficial for oxygen evolution reaction (OER). However, regulating the activity and stability of the components derived from reconstruction is challenging. Here, a strategy of Fe3+ ion modulating the reconstruction components of CoN0.4 on a nitrogen-doped carbon carrier(CoN0.4 /NC) electrocatalyst for promoted OER activity and stability is reported. During the OER process, the cobalt nitride components on the surface of CoN0.4 /NC catalyst were converted into CoOOH and Co4+ species. The addition of Fe3+ stabilized the CoOOH phase and facilitated the formation of Fe-CoOOH active phase, enhancing the activity and stability of CoN0.4 /NC. The Fe10 -CoN0.4 /NC catalyst achieved a current density of 10 mA cm-2 at a low overpotential of 300 mV (vs. RHE) with a Tafel slope of 68.12 mV dec-1 . The overpotential of Fe10 -CoN0.4 /NC was 122 mV lower than that of the CoN0.4 /NC catalyst and was comparable to commercial RuO2 catalyst. This study develops a novel technology for regulating the production of reconstructed species using Fe3+ ions.

Improved Electrochemical Alkaline Seawater Oxidation over Cobalt Carbonate Hydroxide Nanowire Array by Iron Doping

Constructing efficient and low-cost oxygen evolution reaction (OER) catalysts operating in seawater is essential for green hydrogen production but remains a great challenge. In this study, we report an iron doped cobalt carbonate hydroxide nanowire array on nickel foam (Fe-CoCH/NF) as a high-efficiency OER electrocatalyst. In alkaline seawater, such Fe-CoCH/NF demands an overpotential of 387 mV to drive 500 mA cm^-2, superior to that of CoCH/NF (597 mV). Moreover, it achieves excellent electrochemical and structural stability in alkaline seawater.

In Situ Charge Modification within Prussian Blue Analogue Nanocubes by Plasma for Oxygen Evolution Catalysis

A targeted defect-induced strategy of metal sites in a porous framework is an efficient avenue to improve the performance of a catalyst. However, achieving such an activation without destroying the ordered framework is a major challenge. Herein, a dielectric barrier discharge plasma can etch the Fe(CN)₆ group of the NiFe Prussian blue analogue framework in situ through reactive oxygen species generated in the air. Density functional theory calculations prove that the changed local electronic structure and coordination environment of Fe sites can significantly improve oxygen evolution reaction catalytic properties. The modified NiFe Prussian blue analogue is featured for only 316 mV at a high current density (100 mA cm^-2), which is comparable to that of commercial alkaline catalysts. In a solar cell-driven alkaline electrolyzer, the overall electrolysis efficiency is up to 64% under real operation conditions. Over 80 h long-time continuous test under 100 mA cm^-2 highlights superior durability. The density functional theory calculations confirm that the formation of OOH* is the rate-determining step over Fe sites, and Fe(CN)₆ vacancy and extra oxygen atoms can introduce charge redistribution to the catalyst surface, which finally enhances the oxygen evolution reaction catalytic properties by reducing the overpotential by 0.10 V. Both experimental and theoretical results suggest that plasma treatment strategy is useful for modifying the skeletal material nondestructively at room temperature, which opens up a broad prospect in the field of catalyst production.

Ce-Modified Flowerlike NiFe-MOF Nanostructure Based on Ion Competitive Coordination for Enhancing the Oxygen Evolution Reaction

Metal-organic framework (MOF) has become a popular electrocatalyst for the oxygen evolution reaction (OER) because of its large specific surface area and adjustable porosity. Nevertheless, the electrochemical performance of MOFs has been greatly limited by poor intrinsic conductivity and catalytic activity. Herein, we report a Ce-doped nanoflower-like MOF material Ce@NiFe-MOF-5 via a facile ion competitive coordination effect and doping method. Benefiting from the nanoflower structure formed by the stacking of nanosheets, a large number of active sites can be exposed, which favors electron/mass transfer during water oxidation. The coordination substitution of Ce ions not only promoted an increase in the number of active sites on the surface of the nanosheets but also optimized the electronic structure of pristine NiFe-MOF. The well-designed Ce@NiFe-MOF-5 catalysts exhibited superior OER performance under basic conditions, which only required an overpotential of 258 mV at a current density of 10 mA cm^-2 and a Tafel slope of 54.44 mV dec^-1. Moreover, when Ce@NiFe-MOF-5 served as an anode and Pt/C as a cathode, the two-electrode system only needed 1.56 V to drive overall water splitting at 10 mA cm^-2.

Self-Supporting Co/CeO2 Heterostructures for Ampere-Level Current Density Alkaline Water Electrolysis

Remodeling the active surface through fabricating heterostructures can substantially enhance alkaline water electrolysis driven by renewable electrical energy. However, there are still great challenges in the synthesis of highly reactive and robust heterostructures to achieve both ampere-level current density hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Herein, we report a new Co/CeO₂ heterojunction self-supported electrode for sustainable overall water splitting. The self-supporting Co/CeO₂ heterostructures required only low overpotentials of 31.9 ± 2.2, 253.3 ± 2.7, and 316.7 ± 3 mV for HER and 214.1 ± 1.4, 362.3 ± 1.9, and 400.3 ± 3.7 mV for OER at 0.01, 0.5, and 1.0 A·cm^-2, respectively, being one of the best Co-based bifunctional electrodes. Electrolyzer constructed from this electrode acting as an anode and cathode merely required cell voltages of 1.92 ± 0.02 V at 1.0 A·cm^-2 for overall water splitting. Multiple characterization techniques combined with density functional theory calculations disclosed the different active sites on the anode and cathode, and the charge redistributions on the heterointerfaces that can optimize the adsorption of H and oxygen-containing intermediates, respectively. This study presents the tremendous prospective of self-supporting heterostructures for effective and economical overall water splitting.

Incorporation of CeO2 with Ni-Co mixed metal phosphide boosts electrochemical seawater oxidation performance

Electrochemical seawater oxidation has been regarded as one of the most promising strategies for cost-efficient production of hydrogen from the standpoint of sustainability, but suffers from a competitive chlorine evolution/oxidation reaction. Herein, we report a facile hard templated route to fabricate CeO₂ incorporated Ni-Co mixed metal phosphide embedded in a carbon matrix (CeO₂-Co_2-xNi_xP@C). Benefiting from compositional and structural features, the obtained CeO₂-Co_2-xNi_xP@C possesses remarkably improved OER performance in 1 M KOH (η = 295 mV at 10 mA cm^-2) compared with Co_2-xNi_xP@C. More importantly, the catalytic activity and stability is retained well after changing fresh water to seawater to constitute the working electrolyte. The promotion effect of CeO₂ can be attributed to its unique capability in regulating the surface state of catalysts, contributing to efficient inhibition of chlorine competition.