pH-Stable Zn(II) Coordination Polymer as a Multiresponsive Turn-On and Turn-Off Fluorescent Sensor for Aqueous Medium Detection of Al(III) and Cr(VI) Oxo-Anions

Segregation of Constitutional Isomers of Some Aromatic Amines Exploiting the Changes of Photo-Luminescence Behaviour of Isoreticular Metal-Organic Frameworks

Three different two dimensional Cd(II)-based metal-organic frameworks (MOFs) have been synthesized by utilizing same N,N'-donor ligand and three different functionalized dicarboxylate linkers namely isophthalate, 5-nitroisophthalate and 5-hydroxyisophthalate for compound 1, 2 and 3 respectively. The compounds that are isoreticular bi-walled 2D frameworks, show dual fluorescence emission spectra for their π-π* and n-π* excitation. Compound 1 is consists of unsubstituted bridging isophthalate whereas 2 and 3 are made with bridging isophthalate that are substituted by electron withdrawing -NO2 group and electron donating -OH group respectively. These different electronic environments in three MOFs are found effective to respond differently towards the constitutional isomers of aromatic amines having suitable electronic environment. Compound 1 responses towards non-polar -CH2 group containing picolylamine moieties, showing maximum fluorescence emission enhancement for 2-picolylamine in comparison to 3- and 4- isomer of picolylamine derivates. Compound 2, consisting electron withdrawing -NO2 group, responses more significantly towards the electron rich phenylenediamines showing maximum quenching in case of m-phenylenediamine compared to their ortho and para isomers. The change of functionalisation from -NO2 to -OH in 3, helps to detect the electron deficient aminopyridines; where the maximum fluorescence quenching has been observed in presence of 3-aminopyridine in contrast to its other isomers.

Amine-Imine Tautomeric Excited State Intramolecular Proton Transfer in Metal-Organic Frameworks: Alcohol and Anion Recognition

To study the amine-imine tautomeric alteration through excited state intramolecular proton transfer (ESIPT), three amine-functionalized metal-organic frameworks (MOFs) have been synthesized by using two different metal ions and neutral linkers along with same ESIPT-enable anionic linker through the slow diffusion process. All the MOFs have 2D structure with asymmetric units of {[Mn(2,6-dip)(2-atp)](H2O)(CH3OH)}n (1), {[Mn(3,5-dip)(2-atp)](solvent)x}n (2) and {Zn2(3,5-dip)2(2-atp)(μ2-O2-)](solvent)x}n (3) (where 2,6-dip=2,6-di(1H-imidazol-1-yl)pyridine, 3,5-dip=3,5-di(1H-imidazol-1-yl)pyridine, 2-atp=2-amino terephthalic acid). The 2D networks of desolvated form of compound 1, 2, and 3 show water influencing proton transfer for amine-imine tautomerism in excited state through the ionic interaction with water molecules to the frameworks. However, in case of polar small chain aliphatic alcohols like methanol, ethanol and isopropanol; the compounds do not show any dual emissive ESIPT but exhibit three different intensified single peaks for each of the compounds. This different emission intensity in presence of different alcohols are helpful to detect these alcohols selectively. In addition to that in case of all three compounds, the water assisted-ESIPT is interrupted by some strong oxidizing agents like CrO4 2-, Cr2O7 2- and MnO4 - ions. This phenomenon allows the method of detection for the aforesaid oxidizing ions in water by interruption of the dual emissive fluorescence.

A Chemically Robust 2D Ni-MOF as an Efficient Heterogeneous Catalyst for One-Pot Synthesis of Therapeutic and Bioactive 2-Amino-3-Cyano-4H-Pyran Derivatives

Despite possessing numerous catalytic advantages of MOFs, developing 2D frameworks having excellent chemical stability along with new catalytic properties remains a grand challenge. Herein, by employing a mixed ligand synthetic approach, we have constructed a 2D Ni-MOF, IITKGP-52, which exhibits excellent framework robustness in open air, water, as well as over a wide range of aqueous pH solutions (2-12). Benefitting from its robustness and abundant Lewis acidic open metal sites (OMSs), IITKGP-52 is explored in catalyzing the heterogeneous three-component condensation reaction for the tandem synthesis of bioactive 2-amino-3-cyano-4H-pyran derivatives with low catalytic loading, greater compatibility for a wide range of substrates, excellent recyclability and superior catalytic efficiency than the previously employed homo and heterogeneous systems. IITKGP-52 inaugurates the employment of MOF-based catalysts for one-pot synthesis of therapeutic and bioactive 2-amino-3-cyano-4H-pyran derivatives.

Highly Water-Stable 2D MOF as Dual Sensor for the Ultra-Sensitive Aqueous Phase Detection of Nitrofuran Antibiotics and Organochlorine Pesticides

Misuse of antibiotics and pesticides has led to hazardous effects on human health, livestock, agriculture, and aquaculture, which urges researchers to find simple, rapid, efficient, and cost-effective methods for quick on-site analysis of these organic pollutants with functional materials. Herein, a 2D chemically robust MOF: IITKGP-71, {[Cd(MBPz)(2,6-NDC)]·2H2O}n is strategically developed with ease in scalability and exploited as dual sensors toward the toxic antibiotic and pesticide detection via luminescence quenching in aqueous medium. The framework displays exceptional chemical robustness in water for 3 months, in an open atmosphere over 2 months, and wide range of aqueous pH solution (pH = 3-12) for a day. IITKGP-71 can selectively quench the nitrofuran antibiotics (NFZ and NFT) and organochlorine pesticide DCN while remaining unaffected by other interfering antibiotics and pesticides, respectively. An excellent trade-off between high effectivity (high Ksv) and high sensitivity (low LOD) was achieved for the targeted analytes. The easy scalability, high chemical stability, fast responsivity, multi-responsive nature, recyclability with outstanding structural stability made this framework viable in playing a crucial role in safeguarding aquatic ecosystems and public health from the hazardous effects of antibiotics and pesticides.

Enhancing the Pseudocapacitive Energy Storage of Coordination Polymers by Artificially Constructed Defective Sites Anchoring Redox-Active Species

Coordination polymers (CPs) have emerged as potential energy storage materials for supercapacitors due to their tunable chemical composition, structural diversity, and multielectron redox-active sites. However, besides poor cycling stability, the practical application of dense CPs in supercapacitors is generally limited by low specific capacitance and high resistance, which are caused by their low specific surface area and dense frameworks, resulting in insufficient redox reactions of metal sites and poor ion diffusion, respectively. Here, we synthesize a new dense CP {CP-1: [Ce(obb)(HCOO)]∞} via self-assembly of the Ce cation and 4,4'-oxidibenzoate (obb2-). The specific capacitance of CP-1 increases by 156.7 times, and its lifetime after charge-discharge for 5000 cycles is elevated from 62 to 86.7%; meanwhile, the resistance of the positive electrode is reduced from 1.05 to 0.73 Ω through this defect engineering strategy (DES), i.e., cyclic voltammetry sweep in a sulfuric acid electrolyte to artificially construct defects for anchoring the redox-active species (ferricyanide anions). To investigate the universality of this strategy, we have applied it to the other two previously reported CPs {CP-2: [Ce4(obb)6(H2O)9·(H2O)]∞ and CP-3: [Ce2(obb)3(OH)(H2O)(DMF)]∞}, which are also obtained by self-assembly of the Ce cation and obb2- ligand. By comparing the electrochemical performances of the three pristine CPs and their corresponding defect-engineered CPs obtained through the DES, we have found that (i) this strategy is effective in enhancing the electrochemical performances for all three CP materials and (ii) the effect of this strategy on improving the electrochemical performance of CP-1 with a three-dimensional dense network is better than that of CP-3 with a layered structure, and both are better than that of CP-2 with small pores. This work demonstrates a new effective universal strategy for boosting the electrochemical performances of CPs, thus advancing their application in the energy storage field.

Betaine-Modified Green Carbon Dot for Cr(VI) Sensing, in Vivo Cr(VI) Imaging, and Growth Promotion in the Rice Plant

Hexavalent chromium is a toxic environmental pollutant that damages plants due to disruption of nutrient uptake, photosynthesis metabolism, and oxidative stress, which suppresses the growth and development of the plant. In this work, we have developed a betaine-modified carbon dot (BT@CD) sensor for monitoring Cr(VI) in water and plants. Fluorescent carbon dots have been synthesized using jamun juice (Syzygium cumini) as the carbon source subjected to surface modification with betaine (BT@JCD). This BT@JCD exhibits strong blue fluorescence, which significantly decreases in the presence of Cr(VI) due to the inner filter effect in a range of 5-450 nM with a detection limit of 0.033 μM. Due to its easy translocation in the vascular bundles, these fluorescence nanosensors can be applied to detect Cr(VI) in rice plants Oryza sativa) through fluorescence confocal imaging. The treatment of rice plants with BT@JCDs in the concentration range of 0.2 to 1g/mL not only triggered photophysical parameters such as carbohydrates, chlorophyll, and carotenoids but also enhanced the antioxidant enzyme activity promoting plant growth.

Excited-state intramolecular proton transfer (ESIPT) active interwoven polycatenated coordination polymer for selective detection of Al3+ and Ag+ ions along with water detection in less polar solvents

The external stimuli-responsive excited-state intramolecular proton transfer (ESIPT) on/off mechanism is a unique and expedient sensing method that offers easy monitoring through the transition between dual and single-peak emissions. To avail this advantage of ESIPT-based sensing for selective metal ion detection and trace water detection, we have synthesized a 2,5-dihydroxyterephthalate (dht)-based interwoven polycatenated coordination polymer (1). The synthesized compound has been thoroughly characterized using single-crystal and powder X-ray diffraction techniques, along with other physicochemical methods. The synthesized compound exhibits a visual luminescence color change from faint yellow to bright green under UV irradiation in the presence of Al3+ ions. This change is attributed to a blue shift in fluorescence maxima of the keto form of the dht ligand in contact with Al3+ ions. Additionally, the material detects Ag+ ions through an ESIPT-off mechanism. These significant changes in ESIPT - blue shifting for Al3+ and ESIPT-off for Ag+ - start in just 1 mM aqueous solutions of these ions. Significantly, the ESIPT-off for Ag+ is evident even in the presence of other interfering ions. Beyond metal ion detection, this material also offers both qualitative and quantitative sensing of trace amounts of water in various polar organic solvents, such as ethanol (EtOH), tetrahydrofuran (THF), isopropanol (IPA), acetone, and acetonitrile (ACN), through the ESIPT-on/off phenomenon. The activated framework of compound 1 (1') can detect 2%, 4%, 4%, 3%, and 3% water in acetone, ACN, EtOH, IPA, and THF, respectively; through the conversion from a single to dual hump emission alteration. The respective ESIPT peak shift and ESIPT-on/off in the presence of metal ions and water is explained by the interaction between the host coordination polymer and guest analytes.

An imidazole functionalized aqua-stable metal-organic framework for selective fluorogenic detection of herbicide DNOC and antibacterial agent furaltadone in various biological and environmental specimens

The widespread use of herbicides like dinitro-o-cresol (DNOC) and veterinary drugs such as furaltadone (FLT) has surged to meet agricultural and animal husbandry demands, raising significant health and environmental concerns due to their extensive use and unregulated disposal. To address this issue, herein, we developed an imidazole-functionalized metal-organic framework (MOF)-based fluorometric dual sensor for rapid and selective detection of these analytes in aqueous medium. The present MOF-based probe demonstrated 82% fluorescence quenching upon DNOC introduction, whereas 89% quenching occurred in the presence of FLT. The probe exhibited notably high sensitivity, with the lowest ever reported limit of detection (LOD) of 0.5 nM for DNOC and 1.1 nM for FLT. The highest reported Stern-Volmer quenching constant (KSV) value of 5 × 107 M-1 and 2 × 107 M-1 for DNOC and FLT, respectively, further indicates the extraordinary sensitivity of the sensor towards these targeted analytes. The MOF showed a rapid response time of 5 s for both DNOC and FLT. The sensor also demonstrated outstanding selectivity even in the presence of interfering substances, proving effective in various complex environments such as serum, urine, wastewater, and different pH media. We thoroughly investigated the sensor's working mechanisms using different advanced analytical techniques to understand its high selectivity towards the targeted analytes. These findings underscore the sensor's practical and potential real-world applications, offering a valuable tool for environmental pollution monitoring and public health protection.

Zn, Cd and Cu Coordination Polymers for Metronidazole Sensing and for Ullmann and Chan-Lam Coupling Reactions

Five compounds, [Zn2(bpe)(BPTA)2(H2O)2] ⋅ 2H2O (1); [Zn(bpe)(BPTA)] (2); [Cd(bpe)(BPTA)H2O] (3); [Cd(BPTA) (bpmh)] ⋅ 2H2O (4); and Cu2(BPTA)2(bpmh)3(H2O)2] ⋅ 2H2O (5) were prepared employing 2,5-bis(prop-2-yn-1-yloxy)terephthalic acid (2, 5 BPTA) as the primary ligand and 1,2-di(pyridin-4-yl)ethane (4, 4' bpe) (1-3) and 1,2-bis(pyridin-3-ylmethylene)hydrazine (bpmh) (4-5) as the secondary ligands. Single crystal studies indicated that the compounds 1, 3 and 5 have two-dimensional layer structures and compounds 2 and 4 three-dimensional structures. The luminescence behaviour of the compounds 2 and 3 were explored for the sensing of metronidazole in aqueous medium. The studies indicated that the compounds can detect metronidazole in ppm level both in solution as well as simple paper strips. The Cu compound 5 was found to lose the coordinated water molecule at 100 °C without any structural change. The coordinatively unsaturated Cu-centre were examined towards the Lewis acidic character by carrying out the Ullmann type C-C homocoupling reaction of the aromatic halide compounds. The compounds, 4 and 5, also have the Lewis basic functionality arising out the =N-N=, aza groups. The bifunctional nature of the coordination polymers (CP) was explored towards the Chan-Lam coupling reaction between phenyl boronic acid and aniline derivatives in the ethanol medium. In both the catalytic reactions, good yields and recyclability were observed. The present studies illustrated the rich diversity that the transition metal containing compounds exhibit in extended framework structures.

Three coordination polymers based on 4,4'-bis(2-methylimidazol-1-yl)diphenyl ether: Synthesis, structure and selective fluorescent sensing properties

Three CPs [Zn2(PDA)2(BMIOPE)2·3H2O]n (1), [Co(Br-BDC)(BMIOPE)]n (2) and [Co(MIP)(BMIOPE)]n (3) were synthesized by solvothermal method based on dual-ligand strategy (H2PDA, Br-H2BDC, BMIOPE and H2MIP are 1,3-phenylenediacetic acid, 5-bromo-isophthalic acid, 4,4'-bis(2-methylimidazol-1-yl)diphenyl ether and 5-methylisophthalic acid, respectively). Complexes 1 and 3 exhibit twofold parallel interwoven sql nets. Complex 2 is 2D layer structure. The luminescence property investigations showed that complexes 1-3 could act as multi-responsive fluorescent sensors to detect UO22+, Cr2O72- and CrO42- and nitrofurantoin (NFT) through fluorescence turn-off process, presenting excellent sensitivity and selectivity. Finally, the possible fluorescent quenching mechanisms of complexes 1-3 toward the above pollutants are also further investigated by employing spectroscopic methods and quantum chemical calculations. The fluorescence lifetime measurements manifest the mechanism of fluorescence quenching is static quenching process.

Variation in Catalytic Efficacies of a 2D pH-Stable MOF by Altering Activation Methods

Although it is well-known that the Lewis acidity of Metal-Organic Frameworks (MOFs) can effectively enhance their catalytic activity in organic transformations, access to these Lewis-acidic sites remains a key hurdle to widespread applications of Lewis-acidic catalysis by MOFs. Easy accessibility of strong Lewis acidic sites onto 2D MOFs by using proper activation methods can be a cornerstone in attaining desired catalytic performance. Herein, we report a new 2D chemically stable MOF, IITKGP-60, which displayed excellent framework robustness over a wide pH range (2-12). Benefiting from the abundant open metal sites (OMSs) and framework robustness, the catalytic activity of the developed material was explored in one-pot three-component Strecker reaction and Knoevenagel condensation reaction. Moreover, the developed catalyst is superior in catalyzing the reactions involving sterically hindered substrate (1-naphthaldehyde) with high turnover number. A comparative catalytic study was conducted using different activation methods (chloroform and methanol exchanged activated samples), highlighting the significant effect of activation methods on its catalytic performances. The sustainable synthetic pathway under solvent-free conditions for a broad scope of substrates using low catalyst loading and excellent recyclability made the developed pH-stable framework a promising heterogeneous catalyst.

Mechanistical Insights into the Ultrasensitive Detection of Radioactive and Chemotoxic UO22+ Ions by a Porous Anionic Co-Metal-Organic Framework

Development of a simple, cost-efficient, and portable UO22+ sensory probe with high selectivity and sensitivity is highly desirable in the context of monitoring radioactive contaminants. Herein, we report a luminescent Co-based metal-organic framework (MOF), {[Me2NH2]0.5[Co(DATRz)0.5(NH2BDC)]·xG}n (1), equipped with abundant amino functionalities for the selective detection of uranyl cations. The ionic structure consists of two types of channels decorated with plentiful Lewis basic amino moieties, which trigger a stronger acid-base interaction with the diffused cationic units and thus can selectively quench the fluorescence intensity in the presence of other interfering ions. Furthermore, the limit of detection for selective UO22+ sensing was achieved to be as low as 0.13 μM (30.94 ppb) with rapid responsiveness and multiple recyclabilities, demonstrating its excellent efficacy. Density functional theory (DFT) calculations further unraveled the preferred binding sites of the UO22+ ions in the tubular channel of the MOF structure. Orbital hybridization between NH2BDC/DATRz and UO22+ together with its significantly large electron-accepting ability is identified as responsible for the luminescence quenching. More importantly, the prepared 1@PVDF {poly(vinylidene difluoride)} mixed-matrix membrane (MMM) displayed good fluorescence activity comparable to 1, which is of great significance for their practical employment as MOF-based luminosensors in real-world sensing application.

A Highly Chemically Robust 3D Interpenetrated MOF Heterogeneous Catalyst for the Synthesis of Hantzsch 1,4-Dihydropyridines and Drug Molecules

Metal-organic frameworks (MOFs) have attracted immense attention as efficient heterogeneous catalysts over other solid catalysts, however, their chemical environment instability often limits their catalytic potential. Herein, utilizing a flexible unexplored tetra-acid ligand and employing the mixed ligand approach, a 3D interpenetrated robust framework is strategically developed, IITKGP-51 (IITKGP stands for Indian Institute of Technology Kharagpur), which retained its crystallinity over a wide range of pH solution (4-12). Having ample open metal sites (OMSs), IITKGP-51 is explored as a heterogeneous catalyst in one-pot Hantzsch condensation reaction, with low catalyst loading for a broad range of substrates. The synthesis of drug molecules remains one of the most significant and emergent areas of organic and medicinal chemistry. Considering such practical utility, biologically important Nemadipine B and Nifedipine drug molecules (calcium channel protein inhibitor) are synthesized for the first time by using this catalyst and fully characterized via SC-XRD and other spectroscopic methods. This report inaugurates the usage of a MOF material as a catalyst for the synthesis of drug molecules.

Selective Detection of Primary Aromatic Amines through Enhanced Luminescence of a 2D + 2D Inclined Polycatenated Microporous Nitro-Functionalized Metal-Organic Framework

Detection and sensing of amines through enhanced fluorescence emission are always challenging in aqueous solution. The range of different Lewis basicities, shapes, and sizes as well as the different structural arrangements of amines is responsible for their less specificity in aqueous solution. Here, we have designed a highly fluorescent emissive 2D + 2D → 3D inclined polycatenated NO2-functionalized flexible metal-organic framework (MOF) for selective segregation of electron-rich aromatic primary amines from electron-deficient amines in aqueous solution, showing different emission behaviors. The inclined polycatenated 2D + 2D → 3D MOF having an asymmetric unit {[Cd(dim)(2-nta)(H2O)](H2O)(MeOH)}n (1) has been synthesized by a slow diffusion process and characterized thoroughly by single-crystal and powder X-ray diffraction (PXRD) as well as other physicochemical methods. The desolvated species of 1 (Ref. MOF) is found to be stable and has been characterized by PXRD and adsorption study. The fluorescence profile of the Ref. MOF shows selective enhancement in the presence of electron-rich primary aromatic amines, while the same shows quenching for electron-deficient amines in aqueous solution. The Ref. MOF reported here consists of flexible space between two 2D layers that is responsible for different orientations for different analyte primary aromatic amines (PAAs) with different sizes. The above findings are also supported by time-resolved fluorescence spectroscopy. The respective fluorescence enhancement and quenching have been explained by the interaction between the CB of the host MOF and LUMO of guest amines. Therefore, this work presents an operable method for the sensing of PAAs using a single compound, which is a polycatenated MOF.