Au@Cu(II)-MOF: Highly Efficient Bifunctional Heterogeneous Catalyst for Successive Oxidation-Condensation Reactions

AuNP/MIL-88B-NH2 Nanocomposite for the Valorization of Nitroarene by Green Catalytic Hydrogenation

The efficiency of a catalytic process is assessed based on conversion, yield, and time effectiveness. However, these parameters are insufficient for evaluating environmentally sustainable research. As the world is urged to shift towards green catalysis, additional factors such as reaction media, raw material availability, sustainability, waste minimization and catalyst biosafety, need to be considered to accurately determine the efficacy and sustainability of the process. By combining the high porosity and versatility of metal organic frameworks (MOFs) and the activity of gold nanoparticles (AuNPs), efficient, cyclable and biosafe composite catalysts can be achieved. Thus, a composite based on AuNPs and the nanometric flexible porous iron(III) aminoterephthalate MIL-88B-NH2 was successfully synthesized and fully characterized. This nanocomposite was tested as catalyst in the reduction of nitroarenes, which were identified as anthropogenic water pollutants, reaching cyclable high conversion rates at short times for different nitroarenes. Both synthesis and catalytic reactions were performed using green conditions, and even further tested in a time-optimizing one-pot synthesis and catalysis experiment. The sustainability and environmental impact of the catalytic conditions were assessed by green metrics. Thus, this study provides an easily implementable synthesis, and efficient catalysis, while minimizing the environmental and health impact of the process.

Copper based metal organic framework decorated with gold nanoparticles as a new electrochemical sensor material for the detection of L-Cysteine in milk samples

A facile electrochemical sensor based on carbon felt electrode (CFE) modified with gold nanoparticles decorated copper based metal organic framework (AuNPs@Cu-MOF) was achieved for the electrochemical sensing of L-Cysteine (L-Cys). For this purpose, AuNPs@Cu-MOF was synthesized and characterized. The electrochemical behaviors of L-Cys at plain and modified CFEs were investigated via cyclic voltammetry (CV). According CV results, AuNPs@Cu-MOF structure showed a catalytic effect on the oxidation of L-Cys as well as increasing the active electrode surface area by 206% compared to bare CFE. In addition, the pH effect on electrochemical determination of L-Cys at AuNPs@Cu-MOF/CFE was widely examined, and it was determined that the best oxidation peak current of L-Cys was obtained in pH 5 acetate buffer. Moreover, a linear detection range of 30-400 µM for L-Cys with a limit of detection value of 2.21 µM (n = 3) was achieved with the proposed electrochemical sensor. The developed L-Cys sensor was also applied for L-Cys detection in various milk samples and acceptable recovery values were obtained ranging from 100.05 to 108.45%.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-023-05866-1.

Functional Nanomaterials Enhancing Electrochemical Biosensors as Smart Tools for Detecting Infectious Viral Diseases

Electrochemical biosensors are known as analytical tools, guaranteeing rapid and on-site results in medical diagnostics, food safety, environmental protection, and life sciences research. Current research focuses on developing sensors for specific targets and addresses challenges to be solved before their commercialization. These challenges typically include the lowering of the limit of detection, the widening of the linear concentration range, the analysis of real samples in a real environment and the comparison with a standard validation method. Nowadays, functional nanomaterials are designed and applied in electrochemical biosensing to support all these challenges. This review will address the integration of functional nanomaterials in the development of electrochemical biosensors for the rapid diagnosis of viral infections, such as COVID-19, middle east respiratory syndrome (MERS), influenza, hepatitis, human immunodeficiency virus (HIV), and dengue, among others. The role and relevance of the nanomaterial, the type of biosensor, and the electrochemical technique adopted will be discussed. Finally, the critical issues in applying laboratory research to the analysis of real samples, future perspectives, and commercialization aspects of electrochemical biosensors for virus detection will be analyzed.

A Porphyrin-Based Covalent Organic Framework as Metal-Free Visible-LED-Light Photocatalyst for One-Pot Tandem Benzyl Alcohol Oxidation/Knoevenagel Condensation

A porphyrin-based covalent organic framework (COF), namely Porph-UOZ-COF (UOZ stands for the University of Zabol), has been designed and prepared via the condensation reaction of 5,10,15,20-tetrakis-(3,4-dihydroxyphenyl)porphyrin (DHPP) with 1,4-benzenediboronic acid (DBBA), under the solvothermal condition. The solid was characterized by spectroscopic, microscopic, and powder X-ray diffraction techniques. The resultant multifunctional COF revealed an outstanding performance in catalyzing a one-pot tandem selective benzylic C-H photooxygenation/Knoevenagel condensation reaction in the absence of additives or metals under visible-LED-light irradiation. Notably, the catalytic activity of the COF was superior to individual organic counterparts and the COF was both stable and reusable for four consecutive runs. The present approach illustrates the potential of COFs as promising metal-free (photo) catalysts for the development of tandem reactions.

Signal On-Off Electrochemical Sensor for Glutathione Based on a AuCu-Decorated Zr-Containing Metal-Organic Framework via Solid-State Electrochemistry of Cuprous Chloride

A novel signal on-off glutathione (GSH) electrochemical sensor was developed based on a AuCu bimetal-decorated Zr-containing metal-organic framework (Zr-MOF), in which a signal amplification strategy promoted by solid-state electrochemistry of cuprous chloride (CuCl) was used. The Zr-MOF with a large surface area can be effectively used as the substrate for the in situ growth of AuCu bimetals to obtain the Zr-MOF@AuCu nanocomposite. The interaction between Cu in Zr-MOF@AuCu and Cl^- in the solution accompanied with the formation of CuCl displays an enlarged stable oxidation current, which greatly declines with the addition of GSH owing to the specific Cu-GSH interaction. The conversion of CuCl into Cu-GSH triggered the "crowding-out effect" and resulted in a sharp drop in the peak current of CuCl, which can realize the ultrasensitive and selective detection of GSH. The detection mechanism was investigated, and the detection range was 10 pM-1 mM with the detection limit as low as 2.67 pM. The special response mechanism for the detection of GSH allows the highly selective detection of GSH in various real samples with reliable results, endowing the proposed electroanalysis sensor with broad application prospects in biological and food analysis.

CsCu2I3 Nanoparticles Incorporated within a Mesoporous Metal-Organic Porphyrin Framework as a Catalyst for One-Pot Click Cycloaddition and Oxidation/Knoevenagel Tandem Reaction

Metal-organic frameworks (MOFs) and metal halide perovskites are currently under much investigation due to their unique properties and applications. Herein, an innovative strategy has been developed combining an iron-porphyrin MOF, PCN-222(Fe), and an in situ-grown CsCu₂I₃ nontoxic lead-free halide perovskite based on an earth-abundant metal that becomes incorporated within the MOF channels [CsCu₂I₃@PCN-222(Fe)]. Encapsulation was designed to decrease and control the particle size and increase the stability of CsCu₂I₃. The hybrid materials were characterized by various techniques including FE-SEM, elemental mapping and line scanning EDX, TEM, PXRD, UV-Vis DRS, BET surface area, XPS, and photoemission measurements. Hybrid CsCu₂I₃@PCN-222(Fe) materials were examined as heterogeneous multifunctional (photo)catalysts for copper(I)-catalyzed alkyne-azide cycloaddition (CuAAC) and one-pot selective photo-oxidation/Knoevenagel condensation cascade reaction. Interestingly, CsCu₂I₃@PCN-222(Fe) outperforms not only its individual components CsCu₂I₃ and PCN-222(Fe) but also other reported (photo)catalysts for these transformations. This is attributed to cooperation and synergistic effects of the PCN-222(Fe) host and CsCu₂I₃ nanocrystals. To understand the catalytic and photocatalytic mechanisms, control and inhibition experiments, electron paramagnetic resonance (EPR) measurements, and time-resolved phosphorescence were performed, revealing the main role of active species of Cu(I) in the click reaction and the superoxide ion (O₂^•-) and singlet oxygen (¹O₂) in the photocatalytic reaction.

2D Microporous Covalent Organic Frameworks as Cobalt Nanoparticle Supports for Electrocatalytic Hydrogen Evolution Reaction

Covalent organic frameworks (COFs) are a new class of porous crystalline polymers, which are considered to be excellent supports for metal nanoparticles (MNPs) due to their highly ordered structure, chemical tunability, and porosity. In this work, two novel ultra-microporous COFs, JUC−624 and JUC−625, with narrow pore size distribution have been synthesized and used for the confined growth of ultrafine Co nanoparticles (CoNPs) with high loading. In an alkaline environment, the produced materials were investigated as electrocatalysts for the hydrogen evolution reaction (HER). Electrochemical test results show that CoNPs@COFs have a Tafel slope of 84 mV·dec−1, an onset overpotential of 105 mV, and ideal stability. Remarkably, CoNPs@JUC−625 required only 146 mV of overpotential to afford a current density of 10 mA cm−2. This research will open up new avenues for making COF-supported ultrafine MNPs with good dispersity and stability for extensive applications.

A Review on Metal-Organic Frameworks as Congenial Heterogeneous Catalysts for Potential Organic Transformations

Metal-organic frameworks (MOFs) have emerged as versatile candidates of interest in heterogeneous catalysis. Recent research and developments with MOFs positively endorse their role as catalysts in generating invaluable organic compounds. To harness the full potential of MOFs in value-added organic transformation, a comprehensive look at how these materials are likely to involve in the catalytic processes is essential. Mainstays of MOFs such as metal nodes, linkers, encapsulation materials, and enveloped structures tend to produce capable catalytic active sites that offer solutions to reduce human efforts in developing new organic reactions. The main advantages of choosing MOFs as reusable catalysts are the flexible and robust skeleton, regular porosity, high pore volume, and accessible synthesis accompanied with cost-effectiveness. As hosts for active metals, sole MOFs, modified MOFs, and MOFs have made remarkable advances as solid catalysts. The extensive exploration of the MOFs possibly led to their fast adoption in fabricating new biological molecules such as pyridines, quinolines, quinazolinones, imines, and their derivatives. This review covers the varied MOFs and their catalytic properties in facilitating the selective formation of the product organic moieties and interprets MOF’s property responsible for their elegant performance.

A Reusable Efficient Green Catalyst of 2D Cu-MOF for the Click and Knoevenagel Reaction

[Cu(CPA)(BDC)]n (CPA = 4-(Chloro-phenyl)-pyridin-4-ylmethylene-amine; BDC = 1,4-benzenedicarboxylate) has been synthesized and structurally characterized by single crystal X-Ray diffraction measurement. The structural studies establish the copper (II) containing 2D sheet with (4,4) square grid structure. The square grid lengths are 10.775 and 10.769 Å. Thermal stability is assessed by TGA, and subsequent PXRD data establish the crystallinity. The surface morphology is evaluated by FE-SEM. The N2 adsorption-desorption analysis demonstrates the mesoporous feature (∼6.95 nm) of the Cu-MOF. This porous grid serves as heterogeneous green catalyst with superficial recyclability and thermal stability and facilitates organic transformations efficiently such as, Click and Knoevenagel reactions in the aqueous methanolic medium.

Bifunctional Noble-Metal-Free Catalyst for the Selective Aerobic Oxidation-Knoevenagel One-Pot Reaction: Encapsulation of Polyoxometalates into an Alkylamine-Modified MIL-101 Framework

One-pot reactions offer economic and environmental advantages. Therefore, the design and synthesis of multifunctional catalysts capable of catalyzing multistep organic transformations are highly important. Herein, an effective bifunctional heterogeneous catalyst is presented. For the first time, the encapsulation of H₅PMo₁₀V₂O₄₀ (PMoV₂) polyoxometalate into the cages of an alkylamine-modified MIL-101 using an optimized double-solvent method is reported. The obtained PMoV₂@DETA-MIL-101 material displays a great catalytic performance (99% conversion of alcohols) for the selective aerobic oxidation-Knoevenagel one-pot reaction. To the best of our knowledge, this is one of the first reports on the usage of noble-metal-free catalysts for the aerobic oxidation-Knoevenagel one-pot reaction without the addition of additives. The catalyst is very stable and can be used for at least five cycles with no leaching of the active sites.

In Situ Growth of ZIF-8 Nanocrystals on the Pore Walls of 3D Ordered Macroporous TiO2 for a One-Pot Cascade Reaction

It is wise to mimic a bioinspired system to design a nanoreactor as a catalyst containing multiple components for a cascade reaction. Here, we report the uniform growth of well-dispersed nano-scale ZIF-8 crystals on the pore walls of 3DOM TiO2 via the TEA-assisted crystallization process. The UV-vis spectra indicate that the ZIF-8 photosensitizer can extend the visible-light absorption of 3DOM TiO2. The obtained nanoreactor can efficiently catalyze the one-pot aromatic alcohol oxidization and Knoevenagel condensation cascade reaction for larger molecules. This work offers an important strategy for preparing semiconductor–MOF multifunctional composites with a spatially separated compartmentation for the cascade reaction.

Quercetin as a Precursor for the Synthesis of Novel Nanoscale Cu (II) Complex as a Catalyst for Alcohol Oxidation with High Antibacterial Activity

Quercetin (3,3′,4′,5,7-pentahydroxyflavone) is one of the dietary flavonoids, distributed in medicinal plants, vegetables, and fruits. Quercetin has the ability to bind with several metal ions to increase its biological activities. In the last two decades, quercetin has attracted considerable attention due to the biological and pharmaceutical activities such as antioxidant, antibacterial, and anticancer. In the present study, quercetin and ethanolamine were used for the synthesis Schiff base complex, which was characterized by IR, ¹H NMR, and ¹³C NMR spectroscopy. The Schiff base has been employed as a ligand for the synthesis of novel nanoscale Cu (II) complex. The product was characterized by FT-IR spectroscopy, FESEM, and XRD. Significantly, the product showed remarkable catalytic activity towards the oxidation of primary and secondary alcohols. The antibacterial activity of the final product was assessed against Staphylococcus aureus (Gram‐positive) and Escherichia coli (Gram‐negative) bacteria using an inhibition zone test. The synthesized nanoscale Cu (II) complex exhibited a strong antibacterial activity against both Gram-positive and Gram-negative bacteria.

Laser ablation synthesis of metal-doped gold clusters from composites of gold nanoparticles with metal organic frameworks

Metal-doped gold clusters, mainly cages, are receiving rapidly increasing attention due to their tunable catalytic properties. Their synthesis is mostly based on complex procedures, including several steps. In this work, via adsorption of gold nanoparticles (AuNPs) from aqueous solution to MOF (metal organic frameworks) of M = Co, Cu, Ni, and Zn with various linkers the {AuNPs, MOF} composites were prepared. These composites were used for laser ablation synthesis (LAS) using a common mass spectrometer. Several series of positively and negatively charged Au_mM_n^+/− clusters were observed in mass spectra and their stoichiometry (m = 1–35, n = 1–5) was determined. For each dopant (Co, Cu, Ni, and Zn) ~ 50 different clusters were identified in positive, as well as in negative ion modes. About 100 of these clusters were proposed to be endohedral metal-doped gold cages (for m > 12). The developed approach represents a simple procedure for generating metal-doped gold clusters or endohedral metal-doped gold cages materials with potential applications in medicine and/or electronics.

A Ru-Complex Tethered to a N-Rich Covalent Triazine Framework for Tandem Aerobic Oxidation-Knoevenagel Condensation Reactions

Herein, a highly N-rich covalent triazine framework (CTF) is applied as support for a Ru^III complex. The bipyridine sites within the CTF provide excellent anchoring points for the [Ru(acac)₂(CH₃CN)₂]PF₆ complex. The obtained robust Ru^III@bipy-CTF material was applied for the selective tandem aerobic oxidation-Knoevenagel condensation reaction. The presented system shows a high catalytic performance (>80% conversion of alcohols to α, β-unsaturated nitriles) without the use of expensive noble metals. The bipy-CTF not only acts as the catalyst support but also provides the active sites for both aerobic oxidation and Knoevenagel condensation reactions. This work highlights a new perspective for the development of highly efficient and robust heterogeneous catalysts applying CTFs for cascade catalysis.

MOFs assembled from C3 symmetric ligands: structure, iodine capture and role as bifunctional catalysts towards the oxidation-Knoevenagel cascade reaction

Three new NiII/CoII-metal organic frameworks were self-assembled by the reaction of C3 symmetric 1,3,5-tribenzoic acid (H3BTC) and 2,4,6-tris(4-pyridyl)-1,3,5-triazine (4-TPT) ligands and NiII/CoII salts under solvothermal conditions. Isomorphous MOF1 and MOF2 exhibit a 3D pillar-layer framework based on binuclear M2(OH)(COO)2 units connected by tritopic BTC3- and 4-TPT ligands with a novel (3,5)-connected topology net. MOF3 displays a 3-fold interpenetrated 3D network exhibiting a (3,4)-connected topology net. The porous MOF3 can reversibly take up I2. The activated MOFs contain both Lewis acid (NiII center) and basic (uncoordinated pyridyl or carboxylic groups) sites, and act as bifunctional acid-base catalysts. The catalytic measurements demonstrate that the activated MOF3 exhibits good activities for benzyl alcohol oxidation and the Knoevenagel reaction and can be recycled and reused for at least four cycles without losing its structural integrity and high catalytic activity. Thus, the catalytic properties for the oxidation-Knoevenagel cascade reaction have also been studied.

Metal-Organic Frameworks: Synthetic Methods and Potential Applications

Metal-organic frameworks represent a porous class of materials that are build up from metal ions or oligonuclear metallic complexes and organic ligands. They can be considered as sub-class of coordination polymers and can be extended into one-dimension, two-dimensions, and three-dimensions. Depending on the size of the pores, MOFs are divided into nanoporous, mesoporous, and macroporous items. The latter two are usually amorphous. MOFs display high porosity, a large specific surface area, and high thermal stability due to the presence of coordination bonds. The pores can incorporate neutral molecules, such as solvent molecules, anions, and cations, depending on the overall charge of the MOF, gas molecules, and biomolecules. The structural diversity of the framework and the multifunctionality of the pores render this class of materials as candidates for a plethora of environmental and biomedical applications and also as catalysts, sensors, piezo/ferroelectric, thermoelectric, and magnetic materials. In the present review, the synthetic methods reported in the literature for preparing MOFs and their derived materials, and their potential applications in environment, energy, and biomedicine are discussed.

A robust heterogeneous Co-MOF catalyst in azide–alkyne cycloaddition and Friedel–Crafts reactions as well as hydrosilylation of alkynes

A robust Co(ii) MOF with high stability was prepared to promote the azide–alkyne cycloaddition reaction, Friedel–Crafts reactions of indoles and hydrosilylation reactions of alkynes.

Amine-functionalized Cu-MOF nanospheres towards label-free hepatitis B surface antigen electrochemical immunosensors

Metal-organic framework (MOF) nanomaterials offer a wide range of promising applications due to their unique properties, including open micro- and mesopores and richness of functionalization. Herein, a facile synthesis via a solvothermal method was successfully employed to prepare amine-functionalized Cu-MOF nanospheres. Moreover, the growth and the morphology of the nanospheres were optimized by the addition of PVP and TEA. By functionalization with an amine group, the immobilization of a bioreceptor towards the detection of hepatitis B infection biomarker, i.e., hepatitis B surface antigen (HBsAg), could be realized. The immobilization of the bioreceptor/antibody to Cu-MOF nanospheres was achieved through a covalent interaction between the carboxyl group of the antibodies and the amino-functional ligand in Cu-MOF via EDC/NHS coupling. The amine-functionalized Cu-MOF nanospheres act not only as a nanocarrier for antibody immobilization, but also as an electroactive material to generate the electrochemical signal. The electrochemical sensing performance was characterized using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). The results showed that the current response proportionally decreased with the increase of HBsAg concentration. More importantly, the sensing performance of the amine-functionalized Cu-MOF nanospheres towards HBsAg detection was found to be consistent in real human serum media. This strategy successfully resulted in wide linear range detection of HBsAg from 1 ng mL-1 to 500 ng mL-1 with a limit of detection (LOD) of 730 pg mL-1. Thus, our approach provides a facile and low-cost synthesis process of an electrochemical immunosensor and paves the way to potentially utilize MOF-based nanomaterials for clinical use.

Structures and catalytic oxidative coupling reaction of four Co-MOFs modified with R-isophthalic acid (RH, OH and COOH) and trigonal ligands

Four Co-MOFs involving R-isophthalic acid and n-TBT ligands have been synthesized and structurally characterized. Co-MOF-4 exhibits excellent catalytic performance for the oxidative coupling reaction under solvent-free condition and an air atmosphere.

Homogeneous and heterogeneous catalysts for hydrogenation of CO2 to methanol under mild conditions

This review summarizes the concepts, mechanisms, drawbacks and challenges of the state-of-the-art catalysis for CO₂ to MeOH under mild conditions. Thoughtful guidelines and principles for future research are presented and discussed.

Pd/APN-Mn(BTC) as novel, highly efficient, and recyclable catalyst for Suzuki–Miyaura cross coupling reaction

A novel, heterogeneous, and bifunctional metal organic framework containing palladium and manganese, Pd/APN-Mn(BTC), has been prepared and completely characterized using FTIR, XRD, SEM-EDS, N2 adsorption–desorption, TG-DTG, NH3-TPD, and ICP analytical techniques. The APN-Mn(BTC) framework has been shown to be a useful platform for the stabilization and support of palladium nanoparticles (Pd NPs). Very effective catalytic activity has been exhibited by the highly dispersed Pd particles, Pd-NPs/APN-Mn(BTC), in the Suzuki–Miyaura cross-coupling reaction with reasonable to excellent reaction yields under mild conditions in H2O–ethanol solvent.

A Highly Efficient Bifunctional Catalyst CoOx/tri-g-C3N4 for One-Pot Aerobic Oxidation–Knoevenagel Condensation Reaction

A highly efficient bifunctional catalyst of an s-triazine-based carbon-nitride-supported cobalt oxide is developed for the aerobic oxidation–Knoevenagel condensation tandem reaction of benzyl alcohol and malononitrile, whereby 96.4% benzyl alcohol conversion with nearly 100% selectivity towards benzylmalononitrile can be obtained in 6 h at 80 °C. The excellent catalytic performance derives from the high basicity of carbon nitride and strong redox ability of Co species induced by carbon nitride. The catalyst is also quite stable and can be reused without any regeneration treatment, whose product yield is only an 11.5% reduction after four runs.

Harnessing the Untapped Catalytic Potential of a CoFe2O4/Mn-BDC Hybrid MOF Composite for Obtaining a Multitude of 1,4-Disubstituted 1,2,3-Triazole Scaffolds

Metal-organic frameworks derived nanostructures with extraordinary variability, and many unprecedented properties have recently emerged as promising catalytic materials to address the challenges in the field of modern organic synthesis. In this contribution, the present work reports the fabrication of an intricately designed magnetic MOF composite based on Mn-BDC (manganese benzene-1,4-dicarboxylate/manganese terephthalate) microflakes via a facile and benign in situ solvothermal approach. Structural information about the as-synthesized hybrid composite has been obtained with characterization techniques such as TEM, SEM, XRD, FT-IR, AAS, EDX, ED-XRF, and VSM analysis. Upon investigation of catalytic performance, the resulting material unveils remarkable efficacy toward facile access of a diverse array of pharmaceutically active 1,2,3-triazoles from a multicomponent coupling reaction of terminal alkynes, sodium azide, and alkyl or aryl halides as coupling partners. In addition to a wide substrate scope, the catalyst with highly accessible active sites also possesses a stable catalytic metal center along with superb magnetic properties that facilitate rapid and efficient separation. The prominent feature that makes this protocol highly desirable is the ambient and greener reaction conditions in comparison to literature precedents reported to date. Further, a plausible mechanistic pathway is also proposed to rationalize the impressive potential of the developed catalytic system in the concerned reaction. We envision that findings from our study would not only provide new insights into the judicious design of advanced MOF based architectures but also pave the way toward greening of industrial manufacturing processes to tackle critical environmental and economic issues.

Superior absorption capacity of tremella like ferrocene based metal-organic framework in removal of organic dye from water

Removal of organic dyes from water by porous materials is considered as an efficient and low-cost way. Herein for the first time novel tremella-like ferrocene based metal-orgainc framework (TMOF) nanosheets designated as TFMOF were synthesized through a traditional solvothermal method. This ferrocene based TFMOF exhibit outstanding removal efficiency towards organic dye Congo red (CR) from water. After optimizing the reaction conditions, the highest adsorption capacity of 252.25 mg g^-1 could be achieved within 10 min. Furthermore, the investigation of adsorption kinetic indicated this adsorption process could be described as a pseudo-second order kinetic model with k₂ and q_e of 0.0488 g mg^-1 min^-1 and 241.5 mg g^-1, respectively. The adsorption isotherm could also be described as the Sips isotherm model according to the fitting calculation. The removal efficiency could maintain around 50 % with adsorption capacity of 124.38 mg g^-1 after 3 cycles, giving the TFMOF promising potential in the practical water treatment.

CuII- and CoII-Based MOFs: {[La2Cu3(µ-H2O)(ODA)6(H2O)3]∙3H2O}n and {[La2Co3(ODA)6(H2O)6]∙12H2O}n. The Relevance of Physicochemical Properties on the Catalytic Aerobic Oxidation of Cyclohexene

The aerobic oxidation of cyclohexene was done using the heterometallic metal organic frameworks (MOFs) {[La2Cu3(μ-H2O)(ODA)6(H2O)3]⋅3H2O}n (LaCuODA)) (1) and {[La2Co3(ODA)6(H2O)6]∙12H2O}n (LaCoODA) (2) as catalysts, in solvent free conditions (ODA, oxydiacetic acid). After 24 h of reaction, the catalytic system showed that LaCoODA had a better catalytic performance than that of LaCuODA (conversion 85% and 67%). The structures of both catalysts were very similar, showing channels running along the c axis. The physicochemical properties of both MOFs were determined to understand the catalytic performance. The Langmuir surface area of LaCoODA was shown to be greater than that of LaCuODA, while the acid strength and acid sites were greater for LaCuODA. On the other hand, the redox potential of the active sites was related to CoII/CoIII in LaCoODA and CuII/CuI in LaCuODA. Therefore, it is concluded that the Langmuir surface area and the redox potentials were more important than the acid strength and acid sites of the studied MOFs, in terms of the referred catalytic performance. Finally, the reaction conditions were also shown to play an important role in the catalytic performance of the studied systems. Especially, the type of oxidant and the way to supply it to the reaction medium influenced the catalytic results.

Size and function influence study on enhanced catalytic performance of a cooperative MOF for mild, green and fast C-C bond formation

Tuning of pore function and size (surface area) are two key factors that play important roles in the performance of metal-organic-frameworks (MOFs) as catalysts. The catalytic performance of two bulk and nanosized MOFs with different functional groups such as a Brønsted base and Lewis acid was studied in line with the sustainable development of catalysts and green chemistry principles. Bifunctional imine decorated TMU-33, ([Cd3(BDC)3(OPP)(DMF)2]·2DMA)n (TMU-33), (OPP: N,N'-(oxybis(4,1-phenylene))bis(1-(pyridin-4yl)methanimine)), with an adjustable structure and amine functionalized TMU-40, [Zn(BDC)(L*)]·DMF, (L*: N1,N2-bis(pyridin-4-ylmethylene)ethane-1,2-diamine), were evaluated in the C-C bond forming reaction under mild and green conditions. The results show that the nanosized samples of bifunctional TMU-33 which simultaneously have an imine and open metal site exhibit higher performance as Knoevenagel catalysts. Furthermore, among the nanosized samples, the nanoplate TMU-33 with more access to open metal sites shows the highest catalytic activity without any side product in water, at room temperature for 5 min, which confirms that the Lewis acid is the effective catalyst for this reaction. The catalyst could be reused for at least three cycles without any significant loss of its activity. The performance of the structure indicates that the tuning of functionality of MOFs can be a very promising route for the extension of green catalysts.

A new cobalt metal-organic framework as a substrate for Pd nanoparticles applied in high-efficiency nitro phenol degradation and cinnamaldehyde hydrogenation

In recent years, attributed to the excellent catalytic performance of precious metal materials, metal nanoparticles@MOF catalyst has been a popular research direction. Herein, we have synthesized a new 3D cobalt metal-organic framework [Co(TATAB)(344-pytpy)·DMF]n(H3TATAB = 4,4',4″-s-triazine-1,3,5-triyltri-p-aminobenzoic acid; 344-pytpy = 4'-(3-pyridyl)-4,2':6',4″-terpyridine)(1)(P1) by solvothermal method. Its crystal structure was determined with single-crystal X-ray diffraction (SC-XRD) techniques. The final composite Pd-NPs@1 catalyst was synthesized by a reduction method. The catalyst showed high catalytic performance and high recycling stability for nitrophenol degradation and cinnamaldehyde hydrogenation reaction.

Facile Incorporation of Au Nanoparticles into an Unusual Twofold Entangled Zn(II)-MOF with Nanocages for Highly Efficient CO2 Fixation under Mild Conditions

Herein, a new porous Zn(II)-based metal-organic framework (MOF 1) has been prepared, the structure of which featured a twofold entangled motif based on two typical secondary building units (SBUs). The gas sorption studies indicated that MOF 1 may be explored as a useful platform to encapsulate metallic nanoparticles. Then the Au@1 composite has been prepared via a facile incorporation method without extra reducing agents. The Au@1 composite has been fully characterized by HRTEM, SEM-EDX, PXRD, gas sorption, XPS, ICP, etc. Catalytic experiments showed that the Au@1 composite had a perfect catalytic performance in CO₂ fixation for epoxides with different substituents under mild conditions.

Nanoarchitecture Frameworks for Electrochemical miRNA Detection

With revolutionary advances in next-generation sequencing, the human transcriptome has been comprehensively interrogated. These discoveries have highlighted the emerging functional and regulatory roles of a large fraction of RNAs suggesting the potential they might hold as stable and minimally invasive disease biomarkers. Although a plethora of molecular-biology- and biosensor-based RNA-detection strategies have been developed, clinical application of most of these is yet to be realized. Multifunctional nanomaterials coupled with sensitive and robust electrochemical readouts may prove useful in these applications. Here, we summarize the major contributions of engineered nanomaterials-based electrochemical biosensing strategies for the analysis of miRNAs. With special emphasis on nanostructure-based detection, this review also chronicles the needs and challenges of miRNA detection and provides a future perspective on the presented strategies.

Influence of the channel size of isostructural 3d–4f MOFs on the catalytic aerobic oxidation of cycloalkenes

The present work reports a new group of heterogeneous catalysts with a 3D structure, CuLnIDA, {[Cu₃Ln₂(IDA)₆]·8H₂O} (Ln: La^III, Gd^III or Yb^III), with an organic linker (H₂IDA: iminodiacetic acid).