Polyoxometalate-Based Metal–Organic Frameworks as Visible-Light-Induced Photocatalysts

A High Nucleus Cu-Incorporated Giant Phosphotungstate with Photocatalytic Oxidation C-H of Toluene

Exploring a novel photocatalyst for catalytic oxidation of toluene is a sustainable strategy for energy conversion in times of an energy crisis. However, designing an effective photocatalyst for the conversion of toluene remains challenging. Herein, a novel organic monophosphonate-modified high nucleus Cu-incorporated polyoxotungstate, K8H33[{Cu0.5(H2O)4}{Cu2(O3PCH2COO)(1,4,9-α-P2W15O56)}]4·Cl·60H2O (1), has been intentionally synthesized by a self-assembly process utilizing conventional aqueous method. It reveals that 1 contains a polyanion of [{Cu0.5(H2O)}4{Cu2(O3PCH2COO)(1,4,9-α-P2W15O56)}]440- composed of four Dawson-type {1,4,9-α-P2W15} subunits, forming an oval-shaped structure and further connecting into a three-dimensional (3D) framework by lateral {Cu(H2O)4}2+. Interestingly, the trivacant {1,4,9-α-P2W15} subunits were observed in the organophosphonate acid-functionalized polyoxometalates for the first time. Notably, 1 exhibits a wonderful performance in catalytic oxidation of the recalcitrant C(sp3)-H bond of toluene to benzoic acid with a conversion as high as 97% under visible light utilizing O2 as an oxidant.

Metal-Organic Framework-Supported Mono Bipyridyl-Iron Hydroxyl Catalyst for Selective Benzene Hydroxylation into Phenol

Direct hydroxylation of benzene to phenol is more appealing in the industry for the economic and environmentally friendly phenol synthesis than the conventional cumene process. We have developed a UiO-metal-organic framework (MOF)-supported mono bipyridyl-Iron(II) hydroxyl catalyst [bpy-UiO-Fe(OH)2] for the selective benzene hydroxylation into phenol using H2O2 as the oxidant. The heterogeneous bpy-UiO-Fe(OH)2 catalyst showed high activity and remarkable phenol selectivity of 99%, giving the phenol mass-specific activity up to 1261 mmolPhOHgFe-1 h-1 at 60 °C. Bpy-UiO-Fe(OH)2 is significantly more active and selective than its homogeneous counterpart, bipyridine-Fe(OH)2. This enhanced catalytic activity of bpy-UiO-Fe(OH)2 over its homogeneous control is attributed to the active site isolation of the bpy-Fe(OH)2 moiety by the solid MOF that prevents intermolecular decomposition. Moreover, the exceptional selectivity of bpy-UiO-Fe(OH)2 in benzene to phenol conversion is originated via shape-selective catalysis, where the confined reaction space within the porous UiO-MOF prevents the formation of larger overoxidized products such as hydroquinone or benzoquinone, leading to the formation of only smaller-sized phenol after monohydroxylation of benzene. Spectroscopic and controlled experiments and theoretical calculations elucidated the reaction pathway, in which the in situ generated •OH radical mediated by bpy-UiO-FeII(OH)2 is the key species for benzene hydroxylation. This work underscores the significance of MOF-supported earth-abundant metal catalysts for sustainable production of fine chemicals.

Selective Reduction of Nitro Compounds by Organosilanes Catalyzed by a Zirconium Metal-Organic Framework Supported Salicylaldimine-Cobalt(II) Complex

Reducing nitro compounds to amines is a fundamental reaction in producing valuable chemicals in industry. Herein, the synthesis and characterization of a zirconium metal-organic framework-supported salicylaldimine-cobalt(II) chloride (salim-UiO-CoCl) and its application in catalytic reduction of nitro compounds are reported. Salim-UiO-Co displayed excellent catalytic activity in chemoselective reduction of aromatic and aliphatic nitro compounds to the corresponding amines in the presence of phenylsilane as a reducing agent under mild reaction conditions. Salim-UiO-Co catalyzed nitro reduction had a broad substrate scope with excellent tolerance to diverse functional groups, including easily reducible ones such as aldehyde, keto, nitrile, and alkene. Salim-UiO-Co MOF catalyst could be recycled and reused at least 14 times without noticeable losing activity and selectivity. Density functional theory (DFT) studies along with spectroscopic analysis were employed to get into a comprehensive investigation of the reaction mechanism. This work underscores the significance of MOF-supported single-site base-metal catalysts for the sustainable and cost-effective synthesis of chemical feedstocks and fine chemicals.

Nitrogen doped 1 T/2H mixed phase MoS2/CuS heterostructure nanosheets for enhanced peroxidase activity

Heteroatom doping and phase engineering are effective ways to promote the catalytic activity of nanoenzymes. Nitrogen-doped 1 T/2H mixed phase MoS2/CuS heterostructure nanosheets N-1 T/2H-MoS2/CuS are prepared by a simple hydrothermal approach using polyoxometalate (POM)-based metal-organic frameworks (MOFs) (NENU-5) as a precursor and urea as nitrogen doping reagent. The XPS spectroscopy (XPS) and Raman spectrum of N-1 T/2H-MoS2/CuS prove the successful N-doping. NENU-5 was used as the template to prepare 1 T/2H-MoS2/CuS with high content of 1 T phase by optimizing the reaction time. The use of urea as nitrogen dopant added to 1 T/2H-MoS2/CuS, resulted in N-1 T/2H-MoS2/CuS with an increase in the content of the 1 T phase from 80 % to 84 % and higher number of defects. N-1 T/2H-MoS2/CuS shows higher peroxidase activity than 1 T/2H-MoS2/CuS and a catalytic efficiency (Kcat/Km) for H2O2 twice as high as that of 1 T/2H-MoS2/CuS. The enhanced catalytic activity has probably been attributed to several reasons: (i) the insertion of urea during the hydrothermal process in the S-Mo-S layer of MoS2, causing an increase in the interlayer spacing and in 1 T phase content, (ii) the replacement of S atoms in MoS2 by N atoms from the urea decomposition, resulting in more defects and more active sites. As far as we know, N-1 T/2H-MoS2/CuS nanosheets have the lowest detection limit (0.16 µm) for the colorimetric detection of hydroquinone among molybdenum disulfide-based catalysts. This study affords a new approach for the fabrication of high-performance nanoenzyme catalysts.

Novel morphological mono-metallic substituted polyoxometalate immobilized 3-(aminopropyl)-imidazole photocatalysts for visible-light driven degradation: Anti-bacterial activity, membrane bacterial activity applications

A novel keggin-type tetra-metalates substituted polyoxometalate was functionalized by 3-(aminopropyl)-imidazole (3-API) supporting a ligand substitution method. In this paper, polyoxometalate (POMs) (NH₄)₃ [PMo₁₂O₄₀] and transition metal substituted of (NH₄)₃ [{PM^IVMo₁₁O₄₀}.(H₂O)] (M = Mn, V) are used as one of the adsorbents. The 3-API/POMs hybrid have been synthesized and used as adsorbent for the photo-catalysis of azo-dye molecule degradation after visible-light illumination as a simulated organic contaminant in water. The transition metal (M = M^IV, V^IV) substituted keggin-type anions (MPOMs) were synthesized, which reveals the degradation of methyl orange (MO) of about 94.0 % and 88.6 %. Immobilizing high redox ability POMs as an efficient acceptor of photo generated electron, on metal 3-API. In the presence of visible light irradiation result reveals that 3-API/POMs (89.9 %) have incredibly achieved after certain irradiation time and at specific conditions (3)-API/POMs; photo-catalysts dose = 5mg/100 ml, pH = 3 and MO dye concentration = 5 ppm). As the surface of POM catalyst has strong absorption of azo-dye MO molecule engaged as a molecular exploration through photo catalytic reactant. From the SEM images it is clear that the synthesized POMs based materials and POMs conjugated MO have varieties of morphological changes observed such as flakes, rods and spherical like structures. Anti-bacterial study reveals that the process of targeted microorganism occur higher activity against pathogenic bacterium for 180 min of visible-light irradiation is measured in terms of zone of the inhibition. Furthermore, the photo catalytic degradation mechanism of MO using POM, metaled POMs and 3-API/POMs also has been discussed.

3D Lanthanide Neodymium Porphyrin Metal-Organic Framework for Photocatalytic Oxidation of Styrene

A novel three-dimensional lanthanide porphyrin-based MOF (Nd-PMOFs) was synthesized by using tetracarboxyphenyl porphyrin as the ligand and the lanthanide Nd as the coordination metal. Its specific crystal structure information was obtained by single-crystal diffraction with the space group C2/c and the empirical formula C₇₂H₄₅N₆Nd₂O_15.25. This new Nd porphyrin-based MOF with an organic framework formed by a unique coordination method enables the effective separation of photogenerated electrons and holes under photoluminescence, giving it excellent photocatalytic property which could be verified by the characterization data. The photocatalytic performance was examined by taking tert-butyl hydroperoxide as the oxidant and Nd-PMOFs as the catalyst for photocatalytic oxidation of styrene to benzaldehyde with 91.4% conversion and 81.2% benzaldehyde selectivity under optimal reactions, which surpasses most of the results reported in the literature. Several styrenes with other substituents were screened to explore the general applicability of Nd-PMOF for photocatalysis of styrene, among which Nd-PMOFs also exhibited excellent photocatalytic performance. This work offers the possibility to apply lanthanide organometallic frameworks, which are widely used in fluorescent materials, to photocatalysis. In addition, it also provides a new method for the catalytic generation of benzaldehyde from styrene that is consistent with the needs of modern green development.

TM-Free and TM-Catalyzed Mechanosynthesis of Functional Polymers

Mechanochemically induced methods are commonly used for the depolymerization of polymers, including plastic and agricultural wastes. So far, these methods have rarely been used for polymer synthesis. Compared to conventional polymerization in solutions, mechanochemical polymerization offers numerous advantages such as less or no solvent consumption, the accessibility of novel structures, the inclusion of co-polymers and post-modified polymers, and, most importantly, the avoidance of problems posed by low monomer/oligomer solubility and fast precipitation during polymerization. Consequently, the development of new functional polymers and materials, including those based on mechanochemically synthesized polymers, has drawn much interest, particularly from the perspective of green chemistry. In this review, we tried to highlight the most representative examples of transition-metal (TM)-free and TM-catalyzed mechanosynthesis of some functional polymers, such as semiconductive polymers, porous polymeric materials, sensory materials, materials for photovoltaics, etc.

Hybridizing electron-mediated H5PMo10V2O40 with CdS/g-C3N4 for efficient photocatalytic performance of Z-scheme heterojunction in wastewater treatment

Photocatalytic technology has been considered as a promising method to alleviate environmental pollution owing to the dual characteristics of redox. The novel V-based H₅PMo₁₀V₂O₄₀ (HPA-2) photocatalyst with Z-scheme heterostructure was constructed. The energy level of HPA-2 matches well with CdS and g-C₃N₄ (CN) according to Mott-Schottky and UV-Vis diffused reflectance tests, which allows the efficient separation of photogenerated electrons. The optimized CdS/HPA-2/CN showed superior ability in Rhodamine B (RhB) degradation and reduction of Cr (Ⅵ) under visible light irradiation. The maximum rate constant reached 0.092 min^-1 for RhB degradation at 60 min and 0.260 min^-1 for Cr (Ⅵ) reduction at 20 min, respectively. The photocatalytic mechanism was analyzed by adding scavengers. The effect of active species for RhB degradation was determined as h⁺ > ·O₂^- > ·OH, while ·O₂^- and e^- were essential for the reduction of Cr (Ⅵ). Besides, cyclic tests exhibit excellent repeatability and stable structure of CdS/HPA-2/CN after four cycles. Meanwhile, the detailed degradation process of RhB involving de-ethylation, hydroxylation, substitution and decarboxylation was determined according to LC-MS and evaluated by Fukui function calculation. Furthermore, total organic carbon content decreased to 6.2% of the initial value. In this work, as an electron mediator, HPA-2 provides the inspiration for construction of Z-scheme heterojunction, and CdS/HPA-2/CN exhibits enormous potential in the environmental remediation by photocatalysis.

Photocatalytic removal of toxic dyes, liquorice and tetracycline wastewaters by a mesoporous photocatalyst under irradiation of different lamps and sunlight

Simple recyclable K₅CoW₁₂O₄₀/TiO₂ was synthesized and used to remove methyl orange, rhodamine B, direct red 16 and crystal violet toxic organic dyes, liquorice industrial wastewater and tetracycline (TC) as an antibiotic. Photoactivity of the catalyst was checked out under irradiation of various lamps (such as 18 W fluorescent, 300 W Xenon, LED and IR lamps). The best efficiency was obtained by fluorescent lamp at catalyst loading of 3 g/L, initial pH of 5, initial dye concentration of 5 ppm, complete degradation was achieved after 30 min contact time. Mechanistic investigation showed that·O₂ radicals and h⁺ are majorly responsible for photodegradation in this process. Electrochemical investigation, Nyquist, Bode, Mott-Schottky, Tauc plots and photoluminescence proved that using this photocatalyst delay the electron-hole recombination, increase the lifetime of excited electron, extend light absorption to visible region and improve the light absorption capacity. This photocatalyst work well under winter sunlight. Also 97% and 84% dye removal was obtained for liquorice with 300 and 1000 COD at optimal condition. This catalyst showed similar activity for TC wastewater. Photocatalyst was characterized by FE-SEM, EDX, AFM, FT-IR, XRD, PL, DRS, EIS, BJH and BET.

Decomposition-Reassembly Synthesis of a Silverton-Type Polyoxometalate 3D Framework: Semiconducting Properties and Photocatalytic Applications

Polyoxometalate-based all-inorganic three-dimensional (3D) frameworks have recently attracted attention as a unique class of materials due to their unique physicochemical properties and a wide field of application with excellent prospects. We herein synthesized a novel all-inorganic 3D framework material based on cobalt-substituted Silverton-type polyoxometalate, H₆{Co₆W₁₀O₄₂[Co(H₂O)₄]₃}·2H₂O (Co₉W₁₀), which was successfully constructed using Na₁₂[WCo₃^II(H₂O)₂(Co^IIW₉O₃₄)₂]·46-48H₂O (Co₅W₁₉) and Co(NO₃)₂·6H₂O as starting materials in a hydrothermal reaction via a decomposition-reassembly route together with the rational adjustment of pH values. Co₉W₁₀ has been structurally characterized using single-crystal X-ray diffraction. Photocurrent response, band-gap (E_g) value, and the VB-XPS spectrum have been measured to reveal the semiconducting property of Co₉W₁₀. Furthermore, we synthesized x% PTh/Co₉W₁₀ composites (PTh = polythiophene, x = 0.5, 1, 2, 5) for photodegradation of tetracycline hydrochloride (TH) to evaluate the photocatalytic activities of title composites. Due to the optimal molar ratio of hybrids and matching energy levels, 2% PTh/Co₉W₁₀ composites show the best photocatalytic activities among these composites.

Facile high yield, excellent catalytic performance of polyoxometalate-based lanthanide phosphine oxide complexes: Syntheses, structures, photocatalysis and THz spectra

Water pollution, which continuously threatens human health and the sustainable development of society, has become a major concern. Photocatalytic degradation is an effective strategy to remove organic dyes from wastewater. For this strategy, it is crucial to select the appropriate catalyst. Using triphenylphosphine oxide (OPPh₃) as the ligand, phosphomolybdic acid as the anion template, three new lanthanide complexes [Ln(OPPh₃)₄(H₂O)₃](PMo₁₂O₄₀)∙4C₂H₅OH (1-3) (Ln = Sm, Gd, Tb) were synthesized. The raw materials for the reaction are cheap and readily available. The convenient synthesis method is environmentally friendly, with high yield (70%-80%). Complexes 1-3 are all seven-coordinated mononuclear structures centered on lanthanide ions, [PMo₁₂O₄₀]^3- anions and solvent molecules are not coordinated with metal ions. These mononuclear structures eventually form complicated 3D supramolecular structures through hydrogen bonds, Mo-O ^… π or C-H ^… π weak interactions. Complexes 1-3 photocatalytic degradation of MB have high removal rates, as catalysts have enough stability to be reused, and can be used as excellent catalysts for the degradation of dye molecules in sewage. Among them, the removal rate of MB by photodegradation of complex 2 was highest (99.50%). In addition, the effects of different initial concentrations of MB solution and different types of organic dyes on the photocatalysis experiment were investigated. The photocatalytic reaction mechanism of complexes 1-3 was also studied. Due to the similar structures of complexes 1-3, they have almost the same THz absorption spectra with different absorption intensity, which may be attributed to the difference of the number of weak interactions. Therefore, terahertz spectroscopy can be used as a sensitive method to distinguish and determine small differences between lanthanide-organic complexes. This is the first time that this spectrum has been used to characterize lanthanide phosphine oxide complexes modified by [PMo₁₂O₄₀]^3-.

A Keggin-type polyoxometalate-based metal-organic complex as a highly efficient heterogeneous catalyst for the selective oxidation of alkylbenzenes

The direct oxidation of C-H bonds in organic materials into necessary oxygen-containing compounds under mild conditions has attracted increasing attention. A Keggin-type polyoxometalate-based metal-organic complex (MOC), [CuII4Cu^I(H₂trz)₄(C₂O₄)(H₂O)₄(H₃PW_11.18CuII0.82O₄₀)]·8H₂O (1) (H₃trz = 1,2,4-triazole), was designed and synthesized under hydrothermal conditions, and was structurally characterized by single crystal X-ray diffraction, PXRD, IR spectroscopy, TGA, and XPS. Complex 1 is a 3D 4,6,8-connected architecture derived from [Cu₅(H₂trz)₄(C₂O₄)₂(H₂O)₂]_n units and [PW_11.18Cu_0.82O₄₀]^6- anions, which can catalytically oxidize various types of alkylbenzenes. Gas chromatographic analysis showed that complex 1 as a heterogeneous catalyst could effectively catalyze the oxidation of diphenylmethane with 93% conversion and 99% selectivity within 6 h. In addition, the conversion for the catalytic oxidation of ethylbenzene was 96% with 99% selectivity. Compared with some reported catalysts, complex 1 exhibited a better catalytic effect and lower reaction time. Meanwhile, the catalytic oxidation of other benzyl derivatives with complex 1 was also investigated, which indicated that complex 1 possessed excellent catalytic performance.

Design of a Polyoxometalate-Based Metal-Organic Framework for Photocatalytic C(sp3)-H Oxidation of Toluene

A powerful and promising route for developing novel photocatalysts for light-driven toluene oxidation in water under mild conditions is presented. Herein, a novel polyoxometalate-based metal-organic framework (POMOF), {Co₄W₂₂-DPNDI}, is prepared by incorporating the unusual Co₄-sandwiched POM anion [Co₄(μ-OH)₂(SiW₁₁O₃₉)₂]^10- ({Co₄W₂₂}) and the photoactive organic bridging link N,N'-bis(4-pyridylmethyl)naphthalene diimide (DPNDI) into a framework. {Co₄W₂₂} is a good candidate for photocatalytic water oxidation. DPNDI is easily excited to form the radical species DPNDI* in the presence of an electron donor, which is beneficial for activation of the inert O₂. Anion···π interactions and covalent bonds between {Co₄W₂₂} and DPNDI facilitate electron-hole separation and electron transfer. {Co₄W₂₂-DPNDI} displays high catalytic activity for the activation of the C(sp³)-H bond of toluene using light as a driving force and inexpensive water as an oxygen source under mild conditions. In particular, the yield and selectivity are improved by replacing oxygen with water, which may be ascribed to the release of protons during the water oxidation process that facilitate the generation of ^•OH.

An excellent multifunctional photocatalyst cooperated by polyoxometalate-viologen framework for CEES oxidation, Cr(VI) reduction and dyes decolorization under different light regimes

Photocatalytic detoxification of highly toxic agents is a promising approach to protect ecological environment and human health, and the key problem lies in the development of novel efficient photocatalysts. Herein,...

Intermolecular interactions, photocatalysis and THz-TDS interrelationships for lanthanide phosphine oxide complexes based on {PW12}

A series of rare earth complexes containing (α-PW₁₂O₄₀)^3- and PO ligand are synthesized by water bath in 70 °C, [Ln(OPPh₃)₄(H₂O)₃](PW₁₂O₄₀)·4CH₃CN (Ln = La, Pr, Nd, Sm, Gd, Tb, Ho 1-7) (OPPh₃ = Triphenylphosphine oxide, {PW₁₂} = phosphotungstic acid). The precise structures are confirmed by X-ray single crystal diffraction and the result shows all complexes are isostructural. Complexes 1-7 are fully characterized by PXRD, FT-IR, TGA, UV diffuse reflectance spectra and terahertz time-domain spectroscopy (THz-TDS). Complex 3 exhibits the highest photocatalytic degradation efficiency for methylene blue (MB) in this series of complexes. The experimental results showed that the photodegradation efficiency can remain constant at the level of 95% after five consecutive cycles. The photocatalytic reaction kinetics and mechanism of complexes were investigated. Additionally, complexes also exhibit photocatalytic hydrogen evolution activity. THz-TDS was used to characterize the complexes and its raw materials, the characteristic peaks of OPPh₃ (broad peak at 1.20 THz) and phosphotungstic acid (sharp peaks at 0.23, 0.32 THz) were obtained.

Photocatalysis, terahertz time domain spectroscopy and weak interactions of six polyoxometalate-based lanthanide phosphine oxide complexes

Using triphenylphosphine oxide (OPPh3) or tetraethyl ethylenebisphosphonate (L) as ligands, phosphomolybdic acid hydrate as the anion template, six new lanthanide complexes [Nd(OPPh3)4(H2O)3](PMo12O40)∙4CH3CN (1a), [Ln(OPPh3)4(H2O)3](PMo12O40)∙4C2H5OH (2a-4a) (Ln = Dy, Ho, Er),...

Tungsten and Molybdenum Heteropolyanions with Different Central Ions—Correlation between Theory and Experiment

Density functional theory calculations were carried out to investigate the electronic structures of Keggin-typed [XMo₁₂O₄₀]ⁿ⁻ and [XW₁₂O₄₀]ⁿ⁻ anions with different heteroatoms (X = Zn²⁺, B³⁺, Al³⁺, Ga³⁺, Si⁴⁺, Ge⁴⁺, P⁵⁺, As⁵⁺, and S⁶⁺). The influence of solvent on redox properties of heteropolyanions was discussed. For [XW₁₂O₄₀]ⁿ⁻ systems two linear correlation: first, between the experimental redox potential and energies of LUMO orbital; and second, between the experimental redox potential and total energy interaction (calculated between internal tetrahedron (XO₄ⁿ⁻), and rest of Kegging anion skeleton, (W₁₂O₃₆)) were designated. Taking into account the similarity of XW₁₂O₄₀ⁿ⁻ and XMo₁₂O₄₀ⁿ⁻ systems (in geometry and electronic structure), the estimated redox potential of molybdenum heteropolyanions (with X being p block elements) in different solvent were proposed.

pH-Controlled assembly of [ZnW12O40]6--based hybrids from a 0D dimer to a 2D network: synthesis, crystal structure, and photocatalytic performance in transformation of toluene into benzaldehyde

Polyoxometalate-based organic-inorganic hybrids have attracted considerable attention due to their fascinating structures and wide application prospects. In this work, using the same building blocks, ligands and metal ions (ZnW₁₂O₄₀^6-(ZnW₁₂), 2,2'-bipyridine (2,2'-bipy), and Cu²⁺), we synthesized three new POM-based hybrids by controlling the pH values of the reaction systems. These three compounds {(Zn_0.6(H₂)_0.4W₁₂O₄₀)[Cu(2,2'-bipy)(H₂O)][Cu(2,2'-bipy)(H₂O)₂][Cu(2,2'-bipy)(H₂O)₃]}₂·6H₂O (1), (Me₄N)₂{ZnW₁₂O₄₀[Cu(2,2'-bipy)(H₂O)][Cu(2,2'-bipy)(H₂O)₃]}·5H₂O (2), and {(Zn_0.5(H₂)_0.5W₁₂O₄₀)[Cu(2,2'-bipy)][Cu(2,2'-bipy)(H₂O)][Cu(2,2'-bipy)(H₂O)₂]}·5H₂O (3) have been structurally characterized by single-crystal X-ray diffraction. Compound 1 appears as a dimeric cluster structure, while compounds 2 and 3 appear as a 1D chain structure and a 2D network, respectively. The semiconducting properties of compounds 1-3 are different, which was demonstrated by band gap (E_g) and photocurrent response measurements. Compound 3 can efficiently catalyze the photooxidation of toluene to benzaldehyde with high selectivity using molecular oxygen as the oxidant component. Moreover, compound 3 was recycled and reused three times without significant degradation in conversion and selectivity. In addition, the mechanism of the photocatalytic reaction was also investigated.

An unprecedented polyoxometalate-based 1D double chain compound with opposite charges enables conductivity improvement

A POM-based one-dimensional (1D) chain compound, {BW₁₂O₄₀[Cu(2,2'-bipy)₂]₂[Cu(2,2'-bipy)(H₂O)]}{BW₁₂O₄₀[Cu(2,2'-bipy)₂][Cu(2,2'-bipy)(H₂O)₂]}·7H₂O, has been synthesized and structurally characterized, which represents an unprecedented 1D double chain structure with opposite charges. In contrast to common POMs, this compound exhibits a relatively high electrical conductivity of 1.17 × 10^-9 S cm^-1 at 25 °C. In addition, its semiconducting properties have also been investigated by application of photoelectrochemical sensing of H₂O₂.

Design and Solvothermal Synthesis of Polyoxometalate-Based Cu(II)-Pyrazolate Photocatalytic Compounds for Solar-Light-Driven Hydrogen Evolution

Polyoxometalates (POMs) are known for their photocatalytic hydrogen production activity, but their solubility and limited stability often restrict their practical applications. Herein, we designed and solvothermally synthesized two new Cu-H₂bpz (3,3',5,5'-tetramethyl-4,4'-bipyrazole, abbreviated as H₂bpz) compounds, namely, Cu_0.5(H₂bpz)(NO₃) (1) and Cu(Hbpz)(Cl)·DMF (2), and three new polyoxometalate-based Cu(II)-pyrazolate compounds, namely, Cu(PW₁₂O₄₀)_0.5(H₂bpz)₂(H₂O)·(OH)_0.5(H₂O)_5.5 (3), Cu(HPMo₁₂O₄₀)(H₂bpz)₂(H₂O)₂·(H₂O)₄ (4), and Cu₂(SiW₁₂O₄₀)(H₂bpz)₃(H₂O)₃·(H₂O)₆ (5). Compound 3 (Cu(PW₁₂O₄₀)_0.5(H₂bpz)₂(H₂O)·(OH)_0.5(H₂O)_5.5) exhibits the best photocatalytic activity of 44.4 μ L h^-1 g^-1, which may be related to the stability of compounds. Herein, the solvothermal method has been proven to be an effective method in synthesizing stable organic-inorganic hybrid compounds with soluble POMs, metal ions, and organic ligands. Thus, heterogeneous catalysts with outstanding solar-light-driven photocatalytic properties were obtained.

A Copper-Containing Polyoxometalate-Based Metal-Organic Framework as an Efficient Catalyst for Selective Catalytic Oxidation of Alkylbenzenes

A copper-containing polyoxometalate-based metal-organic framework (POMOF), Cu^I₁₂Cl₂(trz)₈[HPW₁₂O₄₀] (HENU-7, HENU = Henan University; trz = 1,2,4-triazole), has been successfully synthesized and well-characterized. In addition, the excellent catalytic ability of HENU-7 has been proved by the selective oxidation of diphenylmethane. Under the optimal conditions, the diphenylmethane conversion obtained over HENU-7 is 96%, while the selectivity to benzophenone is 99%, which outperforms most noble-metal-free POM-based catalysts. Moreover, HENU-7 is stable to reuse for five runs without an obvious loss in activity and also can catalyze the oxidation of different benzylic C-H with satisfactory conversions and selectivities, which implied the significant catalytic activity and recyclability.

Polyoxometalate-Templated Cobalt-Resorcin[4]arene Frameworks: Tunable Structure and Lithium-Ion Battery Performance

By employing a bowl-like tetra(benzimidazole)resorcin[4]arene (TBR4A) ligand, two new polyoxometalate-templated metal-organic frameworks (POMOFs), [Co₈Cl₁₄(TBR4A)₆]·3[H_3.3SiW₁₂O₄₀]·10DMF·11EtOH·20H₂O (1) and [Co₃Cl₂(TBR4A)₂(DMF)₄]·[SiW₁₂O₄₀]·2EtOH·3H₂O (2), have been prepared under solvothermal conditions (DMF = N,N'-dimethylformamide). 1 shows a 2D cationic layer, whereas 2 exhibits a 3D framework. Remarkably, the Keggin POMs in 1 and 2 were located in the cavities formed by two bowl-like resorcin[4]arenes in sandwich fashions. Their framework structures were highly dependent on the coordination modes of the TBR4A ligands. To increase the conductivity of POMOFs, the samples of 1 and 2 were loaded on the conductive polypyrrole-reduced graphene oxide (PPy-RGO) via ball milling (1@PG and 2@PG). Then, the obtained composites experienced calcination at a proper temperature to produce 1@PG-A and 2@PG-A. The resulting 1@PG-A and 2@PG-A composites, with improved conductivities, uniform sizes and micropores, exhibited promising electrochemical performance for lithium-ion batteries. We herein proposed a size-controlled route for the rational fabrication of functional POMOFs and their usage in energy fields.

Photocatalytic hydrogen evolution activity over Pt-assisted metal-organic frameworks dominated by transition metal ions and local coordination environments

Three isostructural pillared-layer frameworks with M-BDC-X layers supported by ditopic HL connectors, [M(HL)(BDC)_0.5X] _n (HL = 4'-(4-hydroxyphenyl)-4,2':6',4″-terpyridine, BDC = terephthalate, M = Cd, X = Cl for (1), M = Cd, X = formate for (2), and M = Co, X = formate for (3)), were solvothermally synthesized, and used as photocatalysts for Pt-assisted visible-light-initiated hydrogen evolution from water splitting. These water-durable frameworks exhibit varied hydrogen production rates of 361.2, 271.3, and 327.5 μmol · g^-1 · h^-1 in 12 h due to their slightly different donor environments of the octahedral Cd^II and Co^II ions. Further experimental and theoretical investigations reveal that the metal ions and the local coordination surroundings have essentially dominated the conduction band minimum and electric resistance of the charge transport, which play highly important roles for the improved catalytic hydrogen evolution ability. These findings demonstrate the electronic effect of the slightly ligand field modifications on the boosting hydrogen generation activity in the noble metal-assisted MOF photocatalytic systems.

Polyoxometalate-based metal–organic frameworks for heterogeneous catalysis

POM-based MOFs simultaneously possessing the virtues of POMs and MOFs exhibit excellent heterogeneous catalytic properties.

Photocatalytic remediation of organic waste over Keggin-based polyoxometalate materials: A review

Photocatalytic remediation of industrial water pollution has courted intense attention lately due to its touted green approach. In this respect, Keggin-based polyoxometalates (POMs) as green solid acids in photocatalytic reaction possess superior qualities, viz. unique photoinduced charge-transfer properties, strong photooxidative-photoreductive ability, high chemical and thermal stability, and so forth. Unfortunately, it suffers from a large bandgap energy, low specific surface area, low recoverability, and scarce utilization in narrow absorption range. Therefore, the pollutant degradation performance is not satisfactory. Consequently, multifarious research to enhance the photocatalytic performance of Keggin-based POMs were reported, viz. via novel modifications and functionalizations through a variety of materials, inclusive of, inter alia, metal oxides, transition metals, noble metals, and others. In order to advocate this emerging technology, current review work provides a systematic overview on recent advancement, initiated from the strategized synthetic methods, followed by hierarchical enhancement and intensification process, at the same time emphasizes on the fundamental working principles of Keggin-based POM nanocomposites. By reviewing and summarizing the efforts adopted global-wide, this review is ended with providing useful outlooks for future studies. It is also anticipated to shed light on producing Keggin-based POM nanocomposites with breakthrough visible- and solar-light-driven photocatalytic performance against recalcitrant organic waste.

Keggin-type polyoxometalate-containing metal–organic hybrids as friction materials for triboelectric nanogenerators

The POM-based inorganic–organic hybrids with different structures were assembled and used as the friction materials to construct TENGs and the results demonstrated that the output performance was closely related to the dielectric constant.

Coordination-Bond-Driven Dissolution-Recrystallization Structural Transformation with the Expansion of Cuprous Halide Aggregate

Metal-organic frameworks (MOFs) with cuprous-halide-aggregates have shown superiority as organic LED (OLED) and semiconductor materials, while engineering MOF flexibility by involving the expansion of cuprous aggregates remains a great challenge. In this particular work, a dissolution-recrystallization structural transformation (DRST) with the dramatic growth of Cu^I-I aggregates, from 2D NJNU-100 to 3D NJNU-101 has been successfully realized. The unsaturated coordination nodes (2-positional nitrogen atoms) in NJNU-100 have been demonstrated to be the driven force for DRST to NJNU-101 via the formation of coordination bonds. The structural transformation process was irreversible and observed with optical microscopy and powder XRD. The expansion of Cu^I-I aggregates was also computational simulated accompanying with the rotation of the neutral tripodal TTTMB ligand (1,3,5-tris(1,2,4-triazol-1-ylmethyl)-2,4,6-trimethylbenzene) and the reduction of Cu^II to Cu^I. Moreover, the intermediate product NJNU-102 was captured by adding the planar molecular anthrancene to shut down the reaction, where only partial 2-positional nitrogen atoms coordinated to the aggregates and the anthrancene was oxidized to anthraquinone. NJNU-102 has further confirmed that DRST involved the breakage and recombination of coordination bonds and the electron transfer. NJNU-100 and NJNU-101 could be applied as semiconductor and OLED materials. This work has provided insights for crystal engineering, especially for the construction of the Cu^I_xX_y aggregates, and illustrated that DRST could be controlled with a rational design (as the unsaturated coordination modes).

Effect of Substituents on the Crystal Structures, Optical Properties, and Catalytic Activity of Homoleptic Zn(II) and Cd(II) β-oxodithioester Complexes

Five novel zinc(II) and cadmium(II) β-oxodithioester complexes, [Zn(L1)₂] (1), [Zn(L2)₂]_n (2), [Zn(L3)₂]_n (3) [Cd(L1)₂]_n (4), [Cd(L2)₂]_n (5), with β-oxodithioester ligands, where L1 = 3-(methylthio)-1-(thiophen-2-yl)-3-thioxoprop-1-en-1-olate, L2 = 3-(methylthio)-1-(pyridin-3-yl)-3-thioxoprop-1-en-1-olate, and L3 = 3-(methylthio)-1-(pyridin-4-yl)-3-thioxoprop-1-en-1-olate, were synthesized and characterized by elemental analysis, IR, UV-vis, and NMR spectroscopy (¹H and ¹³C{¹H}). The solid-state structures of all complexes were ascertained by single-crystal X-ray crystallography. The β-oxodithioester ligands are bonded to Zn(II)/Cd(II) metal ions in an O^∧S and N chelating/chelating-bridging fashion leading to the formation of 1D (in 2-4) and 2D (in 5) coordination polymeric structures, but complex 1 was obtained as a discrete tetrahedral molecule. Complex 4 crystallizes in the C2 chiral space group and has been studied using circular dichroism (CD) spectroscopy. The multidimensional assemblies in these complexes are stabilized by many important noncovalent C-H···π (ZnOSC₃, chelate), π···π, C-H···π, and H···H interactions. The catalytic activities of 1-5 in reactions involving C-C and C-O bond formation have been studied, and the results indicated that complex 3 can be efficiently utilized as a heterogeneous bifunctional catalyst for the Knoevenagel condensation and multicomponent reactions to develop biologically important organic molecules. The luminescent properties of complexes were also studied. Interestingly, zinc complexes 1-3 showed strong lumniscent emission in the solid state, whereas cadmium complexes 4 and 5 exhibited bright luminescent emission in the solution phase. The semiconducting behavior of the complexes was studied by solid-state diffuse reflectance spectra (DRS), which showed optical band gaps in the range of 2.49-2.62 eV.

Electronic Consequences of Ligand Substitution at Heterometal Centers in Polyoxovanadium Clusters: Controlling the Redox Properties through Heterometal Coordination Number

The rational control of the electrochemical properties of polyoxovanadate-alkoxide clusters is dependent on understanding the influence of various synthetic modifications on the overall redox processes of these systems. In this work, the electronic consequences of ligand substitution at the heteroion in a heterometal-functionalized cluster was examined. The redox properties of [V5 O6 (OCH3 )12 FeCl] (1-[V5 FeCl]) and [V5 O6 (OCH3 )12 Fe]X (2-[V5 Fe]X; X=ClO4 , OTf) were compared in order to assess the effects of changing the coordination environment around the iron center on the electrochemical properties of the cluster. Coordination of a chloride anion to iron leads to an anodic shift in redox events. Theoretical modelling of the electronic structure of these heterometal-functionalized clusters reveals that differences in the redox profiles of 1-[V5 FeCl] and 2-[V5 Fe]X arise from changes in the number of ligands surrounding the iron center (e.g., 6-coordinate vs. 5-coordinate). Specifically, binding of the chloride to the sixth coordination site appears to change the orbital interaction between the iron and the delocalized electronic structure of the mixed-valent polyoxovanadate core. Tuning the heterometal coordination environment can therefore be used to modulate the redox properties of the whole cluster.

Multiresponsive Fluorescence "Turn ON-OFF" Switch on PB@EuW10/SiO2 Composite for Dual Spectral Detection of N2H4 and H2O2

Herein, a fluorescence "turn ON-OFF" switch model PB@EuW₁₀/SiO₂ core@shell composite is designed and fabricated by coating EuW₁₀-containing silica layer on Prussian blue (PB) nanoparticles via a facile method. It is found that the presence of PB can quench the photoluminescence of the composite which arises from EuW₁₀. When hydrazine is mixed with the composite dispersion, PB can be reduced to Prussian white (PW), resulting in the decrease of UV absorption and the appearance of photoluminescence (turn ON). In addition, PW can also be converted back to PB, which is achieved by adding hydrogen peroxide, and the photoluminescence of the composite is quenched again (turn OFF). Thus, the composite is applied for N₂H₄ and H₂O₂ detection by fluorescence spectroscopy and UV-vis absorption spectroscopy. Wide linear ranges for N₂H₄ and H₂O₂ detection with low detection limits are found for both detection methods on the PB@EuW₁₀/SiO₂ core@shell composite. Besides, the color from light blue to colorless of the detection dispersion can also indicate the turn ON-OFF switch for fluorescence. Furthermore, the proposed model can also be extended to other composites.

Two rare {M2(MoO4)2} n chain-containing molybdate-based metal-organic complexes with a bis-pyrazole-bis-amide ligand: fluorescent sensing and photocatalysis performance

By introducing a bis-pyrazole-bis-amide ligand, N,N′-bis(1H-pyrazole-4-carboxamide)-1,4-benzene (L), two molybdate-based metal–organic complexes containing {M₂(MoO₄)₂}_n (M = Co, Zn), [Co₂L₂(MoO₄)₂]·H₂O (1), [Zn₂L₂(MoO₄)₂]·H₂O (2), have been prepared under hydrothermal/solvothermal conditions. X-ray diffraction analyses reveal that both 1 and 2 are isostructural. An interesting structural feature is that a kind of {M₂(MoO₄)₂}_n chain could be found in 1 and 2, although different raw materials [Mo₇O₂₄]⁶⁻ and [PMo₁₂O₄₀]³⁻ anions were utilized. Then these chains are further linked by L ligands into a two dimensional (2D) structure. The title complexes represent the first examples containing {MoO₄} units and pyrazole-/or amide-derivative ligands. Complexes 1 and 2 exhibit distinct performances due to different metal centers, with 2 acting as a fluorescent sensor for Fe³⁺, MnO₄⁻, CrO₄²⁻ and Cr₂O₇²⁻, but 1 being a better photocatalyst towards degradation of cationic dyes methylene blue (MB) and neutral red (NR).

Two molybdate-based complexes containing {M₂(MoO₄)₂}_n (M = Co or Zn) chains were obtained, which demonstrated different properties: excellent photocatalytic degradation performance of cationic dyes for 1 and fluorescence sensing behavior for 2.

Temperature-induced structural transformations accompanied by changes in magnetic properties of two copper coordination polymers

Two ferromagnetic copper compounds have been synthesized under different temperature, which represented the rare example of structural transformations resulting from the coordination modes of organic ligands supported by magnetic results.