Acetylenedicarboxylate and In Situ Generated Chlorofumarate-Based Hafnium(IV)–Metal–Organic Frameworks: Synthesis, Structure, and Sorption Properties

Ultrahigh Proton Conductivities of Postmodified Hf(IV) Metal-Organic Frameworks and Related Chitosan-Based Composite Membranes

Recently, researchers have focused on preparing and studying proton exchange membranes. Metal-organic frameworks (MOFs) are candidates for composite membrane fillers due to their high crystallinity and structural characteristics, and Hf-based MOFs have attracted our attention with their high porosity and high stability. Therefore, in this study, Hf-based MOFs were doped into a cost-effective chitosan matrix as fillers to fabricate composite films having excellent proton conductivity (σ). First, the nanoscale MOFs Hf-UiO-66-(OH)₂ (1) and Hf-UiO-66-NH₂ (2) were chemically modified by a ligand design strategy to obtain SA-1 and CBD-2 bearing free -COOH units. The proton conductivities of SA-1 and CBD-2 under optimal test conditions reached 1.23 × 10^-2 and 0.71 × 10^-2 S cm^-1. After that, we prepared composite membranes CS/SA-1 and CS/CBD-2 by the casting method; tests revealed that the introduction of MOFs improved the stabilities and σ values of the membranes, and their best σ could reach above 10^-2 S cm^-1 under 100 °C/98% RH. Further structural characterization and activation energy calculation revealed the conductive mechanism of the composite films. This investigation not only proposes a novel chemical modification method for optimizing the σ of MOFs but also promotes the development of MOF-doped composite membranes and provides a basis for future applications of MOFs in fuel cells.

Enhanced sorption in an indium-acetylenedicarboxylate metal-organic framework with unexpected chains of cis-μ-OH-connected {InO6} octahedra

Single crystals of the new metal-organic framework (MOF) In-adc (HHUD-4) were obtained through the reaction of linear acetylenedicarboxylic acid (H₂adc) with In(NO₃)₃·xH₂O as a racemic conglomerate in the chiral tetragonal space groups P4₃22 and P4₁22. Fundamentally different from other MOFs with linear linkers and trans-μ-OH-connected infinite {MO₆} secondary building units as in the MIL-53-type, the linear adc^2- linker leads to the formation of cis-μ-OH connected {InO₆} polyhedra, which have otherwise only been found before for V-shaped ligands, as in CAU-10-H. A far-reaching implication of this finding is the possibility that trans-μ-OH/straight MIL-53-type MOFs will have polymorphs of CAU-10-H cis-μ-OH/helical topology and vice versa. HHUD-4 is a microporous MOF with a BET surface area of up to 940 m² g^-1 and a micropore volume of up to 0.39 cm³ g^-1. Additionally, HHUD-4 features good adsorption uptakes of 3.77 mmol g^-1 for CO₂ and 1.25 mmol g^-1 for CH₄ at 273 K and 1 bar, respectively, and a high isosteric heat of adsorption of 11.4 kJ mol^-1 for H₂ with a maximum uptake of 6.36 mmol g^-1 at 77 K and 1 bar. Vapor sorption experiments for water and volatile organic compounds (VOCs) such as benzene, cyclohexane and n-hexane yielded uptake values of 135, 269, 116 and 205 mg g^-1, respectively, at 293 K. While HHUD-4 showed unremarkable results for water uptake and low stability for water, it exhibited good stability with steep VOC uptake steps at low relative pressures and a high selectivity of 17 for benzene/cyclohexane mixtures.

Cluster-Based Crystalline Materials for Iodine Capture

The treatment of radioactive iodine in nuclear waste has always been a critical issue of social concern. The rational design of targeted and efficient capture materials is of great significance to the sustainable development of the ecological environment. In recent decades, crystalline materials have served as a molecular platform to study the binding process and capture mechanism of iodine molecules, enabling people to understand the interaction between radioactive iodine guests and pores intuitively. Cluster-based crystalline materials, including molecular clusters and cluster-based metal-organic frameworks, are emerging candidates for iodine capture due to their aggregative binding sites, precise structural information, tunable pores/packing patterns, and abundant modifications. Herein, recent progress of different types of cluster materials and cluster-dominated metal-organic porous materials for iodine capture is reviewed. Research prospects, design strategies to improve the affinity for iodine and possible capture mechanisms are discussed.

Acetylenedicarboxylate as a linker in the engineering of coordination polymers and metal-organic frameworks: challenges and potential

Despite its simplicity as a short and rod-like linear linker, acetylenedicarboxylate (ADC) has for a long time been somewhat overlooked in the engineering of coordination polymers (CPs) and especially in the construction of porous metal-organic frameworks (MOFs). This situation seems to be stemming from the thermosensitivity of the free acid (H₂ADC) precursor and its dicarboxylate, which makes the synthesis of their CP- and MOF-derivatives, as well as the evacuation of guest molecules from their pores, challenging. However, an increasing number of publications dealing with the synthesis, structural characterization and properties of ADC-based CPs and MOFs, disclose ways to tackle this obstacle. In this regard, using mostly room temperature solution synthesis or mechanochemical synthesis, and very rarely solvothermal synthesis, the ADC linker has successfully been used to form one-, two-, and three-dimensional CPs with metal cations from almost all groups of the periodic table of the elements, whereby its carboxylate groups adopt mainly all types of known coordination modes. ADC-based CPs feature properties, including negative thermal expansion, formation of non-centrosymmetric networks, long-range magnetic ordering, and solid-state polymerization. The first ADC-based microporous MOFs were obtained with Ce(IV), Hf(IV) and Zr(IV), in which the presence of the -CC- triple-bond within their backbone results in high hydrophilicity, high CO₂ adsorption capacity and enthalpy, as well as the uptake of halogen vapors. This discloses the potential of ADC-MOFs for gas storage/separation and water adsorption-based applications. Furthermore, H₂ADC/ADC was discovered to undergo facile in situ hydrohalogenation to yield halogen-functionalized fumarate-based CPs/MOFs. This review surveys investigations on ADC-based coordination polymers and metal-organic frameworks, and is intended to stimulate interest on this linker in chemists working in the fields of crystal chemistry or materials science.

Heterometallic Metal-Organic Framework Based on [Cu4I4] and [Hf6O8] Clusters for Adsorption of Iodine

Heterometallic metal-organic framework (MOF) as a kind of porous material is very important because of its excellent properties in catalysis, magnetic, sensor, and adsorption fields, but the reasonable design and syntheses of these are still challenging. Herein, we prepared one heterometallic MOF with the formula [Hf₆(μ₃-OH)₈(OH)₈][(Cu₄I₄) (ina)₄]₂·22DMF (NS-1, ina = isonicotinate). Single-crystal X-ray diffraction analysis revealed that NS-1 is a three-dimensional network with flu topology, constructed from 8-connected [Hf₆(μ₃-OH)₈(OH)₈]⁸⁺ and 4-connected [Cu₄I₄] clusters as second building units (SBUs). To our best knowledge, NS-1 is a rare example with two different metal clusters as SBUs in heterometallic Hf-based MOFs. Interestingly, NS-1 exhibits a reversible adsorption performance for iodine in the cyclohexane solution, the adsorption kinetics fits well with the pseudo-second-order equation, and the Freundlich model relating to multilayer adsorption better describes the process of iodine absorption.

Defect-Rich Hierarchical Porous UiO-66(Zr) for Tunable Phosphate Removal

The introduction of defects into hierarchical porous metal-organic frameworks (HP-MOFs) is of vital significance to boost their adsorption performance. Herein, an advanced template-assisted strategy has been developed to fine-tune the phosphate adsorption performance of HP-MOFs by dictating the type and number of defects in HP-UiO-66(Zr). To achieve this, monocarboxylic acids of varying chain lengths have been employed as template molecules to fabricate an array of defect-rich HP-UiO-66(Zr) derivatives following removal of the template. The as-prepared HP-UiO-66(Zr) exhibits a higher sorption capacity and faster sorption rate compared to the pristine UiO-66(Zr). Particularly, the octanoic acid-modulated UiO-66(Zr) exhibits a high adsorption capacity of 186.6 mg P/g and an intraparticle diffusion rate of 6.19 mg/g·min^0.5, which are 4.8 times and 1.9 times higher than those of pristine UiO-66(Zr), respectively. The results reveal that defect sites play a critical role in boosting the phosphate uptake performance, which is further confirmed by various advanced characterizations. Density functional theory (DFT) calculations reveal the important role of defects in not only providing additional sorption sites but also reducing the sorption energy between HP-UiO-66(Zr) and phosphate. In addition, the hierarchical pores in HP-UiO-66(Zr) can accelerate the phosphate diffusion toward the active sorption sites. This work presents a promising route to tailor the adsorption performance of MOF-based adsorbents via defect engineering.

Tailoring Lewis/Brønsted acid properties of MOF nodes via hydrothermal and solvothermal synthesis: simple approach with exceptional catalytic implications

The Lewis/Brønsted catalytic properties of the Metal-Organic Framework (MOF) nodes can be tuned by simply controlling the solvent employed in the synthetic procedure. In this work, we demonstrate that Hf-MOF-808 can be prepared from a material with a higher amount of Brønsted acid sites, via modulated hydrothermal synthesis, to a material with a higher proportion of unsaturated Hf Lewis acid sites, via modulated solvothermal synthesis. The Lewis/Brønsted acid properties of the resultant metallic clusters have been studied by different characterization techniques, including XAS, FTIR and NMR spectroscopies, combined with a DFT study. The different nature of the Hf-MOF-808 materials allows their application as selective catalysts in different target reactions requiring Lewis, Brønsted or Lewis-Brønsted acid pairs.

Defect Engineering of Nanoscale Hf-Based Metal-Organic Frameworks for Highly Efficient Iodine Capture

With the rapid development of the nuclear industry, how to deal with radioactive iodine waste in a timely and effective manner has become an important issue to be solved urgently. Herein, the defect-engineering strategy has been applied to develop a metal-organic framework (MOF)-based solid adsorbent by using the classical UiO-type Hf-UiO-66 as an example. After simple acid treatment, the produced defect-containing Hf-UiO-66 (DHUN) not only retains its topological structure, high crystallization, and regular shape but also shows a great increase in the Brunauer-Emmett-Teller value and pore size in comparison with the original Hf-UiO (HUN). These formed defects within DHUN have been demonstrated to be important for the great enhancement of the iodine capture and following application in computed tomography imaging in vitro. This present work gives a new insight into the control and formation of defect sites, and this simple and efficient defect-engineering strategy also shows great promise for the development of novel solid adsorbents and other functional MOF materials.

The chemistry and applications of hafnium and cerium(iv) metal-organic frameworks

The coordination connection of organic linkers to the metal clusters leads to the formation of metal-organic frameworks (MOFs), where the metal clusters and ligands are spatially entangled in a periodic manner. The immense availability of tuneable ligands of different length and functionalities gives rise to robust molecular porosity ranging from several angstroms to nanometres. Among the large family of MOFs, hafnium (Hf) based MOFs have been demonstrated to be highly promising for practical applications due to their unique and outstanding characteristics such as chemical, thermal, and mechanical stability, and acidic nature. Since the report of UiO-66(Hf) and DUT-51(Hf) in 2012, less than 200 Hf-MOFs (ca. 50 types of structures) have been reported. Besides, tetravalent cerium [Ce(iv)] has been proven to be capable of forming similar topological MOF structures to Zr and Hf since its first discovery in 2015. So far, ca. 40 Ce(iv) MOFs with 60% having UiO-66-type structure have been reported. This review will offer a holistic summary of the chemistry, uniqueness, synthesis, and applications of Hf/Ce(iv)-MOFs with a focus on presenting the development in the Hf/Ce(iv)-clusters, topologies, ligand structures, synthetic strategies, and practical applications of Hf/Ce(iv)-MOFs. In the end, we will present the research outlook for the development of Hf/Ce(iv)-MOFs in the future, including fundamental design of Hf/Ce(iv)-clusters, defect engineering, and various applications including membrane development, diversified types of catalytic reactions, irradiation absorption in nuclear waste treatment, water production and wastewater treatment, etc. We will also present the emerging computational approaches coupled with machine-learning algorithms that can be applied in screening Hf and Ce(iv) based MOF structures and identifying the best-performing MOFs for tailor-made applications in future practice.

Eu(O2 C-C≡C-CO2 ): An EuII Containing Anhydrous Coordination Polymer with High Stability and Negative Thermal Expansion

Anhydrous Eu^II -acetylenedicarboxylate (EuADC; ADC^2- = ^- O₂ C-C≡C-CO₂ ^- ) was synthesized by reaction of EuBr₂ with K₂ ADC or H₂ ADC in degassed water under oxygen-free conditions. EuADC crystallizes in the SrADC type structure (I4₁ /amd, Z=4) forming a 3D coordination polymer with a diamond-like arrangement of Eu²⁺ nodes (msw topology including the connecting ADC^2- linkers). Deep orange coloured EuADC is stable in air and starts decomposing upon heating in an argon atmosphere only at 440 °C. Measurements of the magnetic susceptibilities (μ_eff =7.76 μ_B ) and ¹⁵¹ Eu Mössbauer spectra (δ=-13.25 mm s^-1 at 78 K) confirm the existence of Eu²⁺ cations. Diffuse reflectance spectra indicate a direct optical band gap of E_g =2.64 eV (470 nm), which is in accordance with the orange colour of the material. Surprisingly, EuADC does not show any photoluminescence under irradiation with UV light of different wavelengths. Similar to SrADC, EuADC exhibits a negative thermal volume expansion below room temperature with a volume expansion coefficient α_V =-9.4(12)×10^-6  K^-1 .

Acetylenedicarboxylate-based cerium(iv) metal–organic framework with fcu topology: a potential material for air cleaning from toxic halogen vapors

The most contracted Ce(iv)–metal–organic framework (MOF) with fcu topology incorporating an alkyne-based linker, namely acetylenedicarboxylate (ADC), was synthesized under green conditions in water at room temperature and thoroughly characterized.