Photochemical Hydrogen Evolution from Neutral Water with a Cobalt Metallopeptide Catalyst

Artificial Photosynthesis for Regioselective Reduction of NAD(P)+ to NAD(P)H Using Water as an Electron and Proton Source

In photosynthesis, four electrons and four protons taken from water in photosystem II (PSII) are used to reduce NAD(P)+ to produce NAD(P)H in photosystem I (PSI), which is the most important reductant to reduce CO2. Despite extensive efforts to mimic photosynthesis, artificial photosynthesis to produce NAD(P)H using water electron and proton sources has yet to be achieved. Herein, we report the photocatalytic reduction of NAD(P)+ to NAD(P)H and its analogues in a molecular model of PSI, which is combined with water oxidation in a molecular model of PSII. Photoirradiation of a toluene/trifluoroethanol (TFE)/borate buffer aqueous solution of hydroquinone derivatives (X-QH2), 9-mesityl-10-methylacridinium ion, cobaloxime, and NAD(P)+ (PSI model) resulted in the quantitative and regioselective formation of NAD(P)H and p-benzoquinone derivatives (X-Q). X-Q was reduced to X-QH2, accompanied by the oxidation of water to dioxygen under the photoirradiation of a toluene/TFE/borate buffer aqueous solution of [(N4Py)FeII]2+ (PSII model). The PSI and PSII models were combined using two glass membranes and two liquid membranes to produce NAD(P)H using water as an electron and proton source with the turnover number (TON) of 54. To the best of our knowledge, this is the first time to achieve the stoichiometry of photosynthesis, photocatalytic reduction of NAD(P)+ by water to produce NAD(P)H and O2.

3D-Cobalt-Dicyanamide-Derived 2D-Layered-Co(OH)2-Based Catalyst for Light-Driven Hydrogen Evolution

Derivation of 3D coordination polymers to produce active catalysts has been a feasible strategy to achieve a precise coordination sphere for the catalytic site. This study demonstrates the partial conversion of a 3D cobalt dicyanamide coordination polymer, Co-dca, to a 2D layered hydroxide-oxyhydroxide structure under photocatalytic conditions. The catalyst exhibits an activity as high as 28.3 mmol h-1 g-1 in the presence of a [Ru(bpy)3]2+/triethylamine (TEA) couple to maintain it for at least 12 h. Photocatalytic and characterization studies reveal that the dicyanamide ligand within the coordination polymer is crucial for governing modification and achieving a superior H2 evolution rate. Moreover, we observed the critical role of TEA as the hydrolyzing agent for the transformation process. This study displays that the metal dicyanamides can be utilized as templates for preparing active and robust catalysts.

An Algebraic Blueprint for Predicting Turnover Numbers and Endpoints in Photocatalysis

Photocatalysis is a contemporary research field given that the world's fossil energy resources including coal, mineral oil and natural gas are finite. The vast variety of photocatalytic systems demands for standardized protocols facilitating an objective comparison. While there are commonly accepted performance indicators such as the turnover number (TON) that are usually reported, to date there is no unified concept for the determination of TONs and the endpoint of the reaction during continuous measurements. Herein, we propose an algebraic approach using defined parameters and boundary conditions based on partial-least squares regression for generically calculating and predicting the turnover number and the endpoint of a photocatalytic experiment. Furthermore, the impact of the analysis period was evaluated with respect to the fidelity of the obtained TON, and the influence of the data point density along critical segments of the obtained fitting function is demonstrated.

Impact of N-heteroaromatic N-termini in Cu(II) ATCUN metallopeptides on their biorelevant redox activity

Cu(II) complexes with ATCUN peptide ligands have been investigated for their ROS (reactive oxygen species) generation and oxidative DNA degradation abilities. The biological activity of most ATCUN complexes such as Cu-GGH (Gly-Gly-His) is, however, low. Tuning the redox chemistry by incorporation of N-heteroaromatics reinstates ROS production which leads to efficient DNA cleavage.

Accelerating Nickel-Based Molecular Construction via DFT Guidance for Advanced Photocatalytic Hydrogen Production

Understanding the nickel-based molecular catalyst structure and functional relationship is crucial for catalytic hydrogen production in aqueous solutions. Density functional theory (DFT) provides mature theoretical knowledge for efficient catalyst design, significantly reducing catalyst synthesis time and energy consumption. In the present work, three molecular catalysts, Ni(qbz)(pys)₂ (qbz = 2-quinoline benzimidazole) (NQP 1), Ni(qbo)(pys)₂ (qbo = 2-quinoline benzothiazole) (NQP 2), and Ni(pbz)(pys)₂ (pbz = 4-chloro-2,2-pyridylbenzimidazole) (NQP 3) (pys = 2-mercaptopyridine), were designed and synthesized and exhibit a high performance for H₂ generation in aqueous solution with a lamp (λ ≥ 400 nm) under visible light irradiation. Under the optimal conditions, a H₂ evolution rate as high as 1190 μmol h^-1 can be obtained over 25 mg of NQP 1 with the best catalytic performance. DFT has been adopted in this study to unveil the relationship between the ligand qbz and catalyst NQP 1─an efficient step in the design of catalysts with an excellent catalytic performance. We show that, in addition to the presence of the triphenyl ring increasing the overall electron density, rapid electron transfer (ET) from excited fluorescein (Fl) to NQP 1 significantly improves the chance of photogenerated electrons transferring to the active site, ultimately increasing the catalytic activity for H₂ production. This work on understanding the correlation between structures and properties of complexes provides a new idea for manufacturing high-performance photocatalysts.

Not that innocent - ammonium ions boost homogeneous light-driven hydrogen evolution

We report that the homogeneous light-driven hydrogen evolution reaction (HER) can be significantly enhanced by the presence of seemingly innocent ammonium (NH₄⁺) cations. Experimental studies with different catalysts, photosensitizers and electron donors show this to be a general effect. Preliminary photophysical and mechanistic studies provide initial suggestions regarding the role of ammonium in the HER enhancement.

A cobalt mimochrome for photochemical hydrogen evolution from neutral water

A system for visible light-driven hydrogen production from water is reported. This system makes use of a synthetic mini-enzyme known as a mimochrome (CoMC6*a) consisting of a cobalt deuteroporphyrin and two attached peptides as a catalyst, [Ru(bpy)₃]²⁺ (bpy = 2,2'-bipyridine) as a photosensitizer, and ascorbic acid as a sacrificial electron donor. The system achieves turnover numbers (TONs) up to 10,000 with respect to catalyst and optimal activity at pH 7. Comparison with related systems shows that CoMC6*a maintains the advantages of biomolecular catalysts, while exceeding other cobalt porphyrins in terms of total TON and longevity of catalysis. Herein, we lay groundwork for future study, where the synthetic nature of CoMC6*a will provide a unique opportunity to tailor proton reduction chemistry and expand to new reactivity.

Fundamental Characterization, Photophysics and Photocatalysis of a Base Metal Iron(II)-Cobalt(III) Dyad

A new base metal iron-cobalt dyad has been obtained by connection between a heteroleptic tetra-NHC iron(II) photosensitizer combining a 2,6-bis[3-(2,6-diisopropylphenyl)imidazol-2-ylidene]pyridine with 2,6-bis(3-methyl-imidazol-2-ylidene)-4,4'-bipyridine ligand, and a cobaloxime catalyst. This novel iron(II)-cobalt(III) assembly has been extensively characterized by ground- and excited-state methods like X-ray crystallography, X-ray absorption spectroscopy, (spectro-)electrochemistry, and steady-state and time-resolved optical absorption spectroscopy, with a particular focus on the stability of the molecular assembly in solution and determination of the excited-state landscape. NMR and UV/Vis spectroscopy reveal dissociation of the dyad in acetonitrile at concentrations below 1 mM and high photostability. Transient absorption spectroscopy after excitation into the metal-to-ligand charge transfer absorption band suggests a relaxation cascade originating from hot singlet and triplet MLCT states, leading to the population of the 3 MLCT state that exhibits the longest lifetime. Finally, decay into the ground state involves a 3 MC state. Attachment of cobaloxime to the iron photosensitizer increases the 3 MLCT lifetime at the iron centre. Together with the directing effect of the linker, this potentially makes the dyad more active in photocatalytic proton reduction experiments than the analogous two-component system, consisting of the iron photosensitizer and Co(dmgH)2 (py)Cl. This work thus sheds new light on the functionality of base metal dyads, which are important for more efficient and sustainable future proton reduction systems.

Photochemical hydrogen evolution from cobalt microperoxidase-11

A photochemical system utilizing the semisynthetic biomolecular catalyst acetylated cobalt microperoxidase-11 (CoMP11-Ac) along with [Ru(bpy)₃]²⁺ as a photosensitizer and ascorbic acid as an electron donor is shown to generate hydrogen from water in a visible light-driven reaction. The reductive quenching pathway facilitated by photoexcited [Ru(bpy)₃]²⁺ overcomes the high overpotential observed for CoMP11-Ac in electrocatalysis, yielding turnover numbers ranging from 606 to 2390 (2 μM - 0.1 μM CoMP11-Ac). The longevity of CoMP11-Ac in the photochemical system, sustaining catalysis for over 20 h, is in contrast to its previously reported behavior in an electrochemical system where catalysis slows after 15 min. Proton reduction turnover number and rate are highest at a neutral pH, a rare feature among cobalt catalysts in similar photochemical systems, which typically function best under acidic conditions. Incorporating biomolecular components into the design of catalysts for photochemical systems may address the need for hydrogen generation from neutral-pH water sources.

Copper catalysts for photo- and electro-catalytic hydrogen production

Square planar 1, square pyramidal 2 and trigonal bipyramidal 3 copper complexes are poor catalysts for hydrogen evolution (HER) under photocatalytic conditions, whereas 1 is, or forms, a good and enduring electrocatalyst for HER, but 2 and 3 do not.

Designed Metal-ATCUN Derivatives: Redox- and Non-redox-Based Applications Relevant for Chemistry, Biology, and Medicine

The designed “ATCUN” motif (amino-terminal copper and nickel binding site) is a replica of naturally occurring ATCUN site found in many proteins/peptides, and an attractive platform for multiple applications, which include nucleases, proteases, spectroscopic probes, imaging, and small molecule activation. ATCUN motifs are engineered at periphery by conjugation to recombinant proteins, peptides, fluorophores, or recognition domains through chemically or genetically, fulfilling the needs of various biological relevance and a wide range of practical usages. This chemistry has witnessed significant growth over the last few decades and several interesting ATCUN derivatives have been described. The redox role of the ATCUN moieties is also an important aspect to be considered. The redox potential of designed M-ATCUN derivatives is modulated by judicious choice of amino acid (including stereochemistry, charge, and position) that ultimately leads to the catalytic efficiency. In this context, a wide range of M-ATCUN derivatives have been designed purposefully for various redox- and non-redox-based applications, including spectroscopic probes, target-based catalytic metallodrugs, inhibition of amyloid-β toxicity, and telomere shortening, enzyme inactivation, biomolecules stitching or modification, next-generation antibiotic, and small molecule activation.

Photocatalytic Hydrogen Evolution from Plastoquinol Analogues as a Potential Functional Model of Photosystem I

The recent development of a functional model of photosystem II (PSII) has paved a new way to connect the PSII model with a functional model of photosystem I (PSI). However, PSI functional models have yet to be reported. We report herein the first potential functional model of PSI, in which plastoquinol (PQH₂) analogues were oxidized to plastoquinone (PQ) analogues, accompanied by hydrogen (H₂) evolution. Photoirradiation of a deaerated acetonitrile (MeCN) solution containing hydroquinone derivatives (X-QH₂) as a hydrogen source, 9-mesityl-10-methylacridinium ion (Acr⁺-Mes) as a photoredox catalyst, and a cobalt(III) complex, Co^III(dmgH)₂pyCl (dmgH = dimethylglyoximate monoanion; py = pyridine) as a redox catalyst resulted in the evolution of H₂ and formation of the corresponding p-benzoquinone derivatives (X-Q) quantitatively. The maximum quantum yield for photocatalytic H₂ evolution from tetrachlorohydroquinone (Cl₄QH₂) with Acr⁺-Mes and Co^III(dmgH)₂pyCl and H₂O in deaerated MeCN was determined to be 10%. Photocatalytic H₂ evolution is started by electron transfer (ET) from Cl₄QH₂ to the triplet ET state of Acr⁺-Mes to produce Cl₄QH₂^•+ and Acr^•-Mes with a rate constant of 7.2 × 10⁷ M^-1 s^-1, followed by ET from Acr^•-Mes to Co^III(dmgH)₂pyCl to produce [Co^II(dmgH)₂pyCl]^-, accompanied by the regeneration of Acr⁺-Mes. On the other hand, Cl₄QH₂^•+ is deprotonated to produce Cl₄QH^•, which transfers either a hydrogen-atom transfer or a proton-coupled electron transfer to [Co^II(dmgH)₂pyCl]^- to produce a cobalt(III) hydride complex, [Co^III(H)(dmgH)₂pyCl]^-, which reacts with H⁺ to evolve H₂, accompanied by the regeneration of Co^III(dmgH)₂pyCl. The formation of [Co^II(dmgH)₂pyCl]^- was detected by electron paramagnetic resonance measurements.

Scaffold-Based Functional Models of [Fe]-Hydrogenase (Hmd): Building the Bridge between Biological Structure and Molecular Function

The well-known dinuclear [FeFe] and [NiFe] hydrogenase enzymes are redox-based proton reduction and H₂ oxidation catalysts. In comparison, the structural and functional aspects of the mononuclear nonredox hydrogenase, known as [Fe]-hydrogenase or Hmd, have been less explored because of the relatively recent crystallographic elucidation of the enzyme active site. Additionally, the synthetic challenges posed by the highly substituted and asymmetric coordination environment of the iron guanylylpyridinol (FeGP) cofactor have hampered functional biomimetic modeling studies to a large extent. The active site contains an octahedral low-spin Fe(II) center with the following coordination motifs: a bidentate acyl-pyridone moiety (C,N) and cysteinyl-S in a facial arrangement; two cis carbonyl ligands; and a H₂O/H₂ binding site. In [Fe]-hydrogenase, heterolytic H₂ activation putatively by the pendant pyridone/pyridonate-O base serving as a proton acceptor. Following H₂ cleavage, an intermediate Fe-H species is thought to stereoselectively transfer a hydride to the substrate methenyl-H₄MPT⁺, thus forming methylene-H₄MPT. In the past decade, chemists, inspired by the elegant organometallic chemistry inherent to the FeGP cofactor, have synthesized a number of faithful structural models. However, functional systems are still relatively limited and often rely on abiological ligands or metal centers that obfuscate a direct correlation to nature's design.Our group has developed a bioinspired suite of synthetic analogues of Hmd to better understand the effects of structure on the stability and functionality of the Hmd active site, with a special emphasis on using a scaffold-based ligand design. This systematic approach has contributed to a deeper understanding of the unique ligand array of [Fe]-hydrogenase in nature and has ultimately resulted in the first functional synthetic models without the aid of abiological ligands. This Account reviews the reactivity of the functional anthracene-scaffolded synthetic models developed by our group in the context of current mechanistic understanding drawn from both protein crystallography and computational studies. Furthermore, we introduce a novel thermodynamic framework to place the reactivity of our model systems in context and provide an outlook on the future study of [Fe]-hydrogenase synthetic models through both a structural and functional lens.

Enhanced Hydrogen Evolution in Neutral Water Catalyzed by a Cobalt Complex with a Softer Polypyridyl Ligand

To explore the structure-function relationships of cobalt complexes in the catalytic hydrogen evolution reaction (HER), we studied the substitution of a tertiary amine with a softer pyridine group and the inclusion of a conjugated bpy unit in a Co complex with a new pentadentate ligand, 6-[6-(1,1-di-pyridin-2-yl-ethyl)-pyridin-2-ylmethyl]-[2,2']bipyridinyl (Py3Me-Bpy). These modifications resulted in significantly improved stability and activity in both electro- and photocatalytic HER in neutral water. [Co(Py3Me-Bpy)(OH₂ )](PF₆ )₂ catalyzes the electrolytic HER at -1.3 V (vs. SHE) for 20 hours with a turnover number (TON) of 266 300, and photolytic HER for two days with a TON of 15 000 in pH 7 aqueous solutions. The softer ligand scaffold possibly provides increased stability towards the intermediate Co^I species. DFT calculations demonstrate that HER occurs through a general electron transfer/proton transfer/electron transfer/proton transfer pathway, with H₂ released from the protonation of Co^II -H species.

Light-driven catalysis with engineered enzymes and biomimetic systems

Efforts to drive catalytic reactions with light, inspired by natural processes like photosynthesis, have a long history and have seen significant recent growth. Successfully engineering systems using biomolecular and bioinspired catalysts to carry out light-driven chemical reactions capitalizes on advantages offered from the fields of biocatalysis and photocatalysis. In particular, driving reactions under mild conditions and in water, in which enzymes are operative, using sunlight as a renewable energy source yield environmentally friendly systems. Furthermore, using enzymes and bioinspired systems can take advantage of the high efficiency and specificity of biocatalysts. There are many challenges to overcome to fully capitalize on the potential of light-driven biocatalysis. In this mini-review, we discuss examples of enzymes and engineered biomolecular catalysts that are activated via electron transfer from a photosensitizer in a photocatalytic system. We place an emphasis on selected forefront chemical reactions of high interest, including CH oxidation, proton reduction, water oxidation, CO₂ reduction, and N₂ reduction.