Interfacial jamming of surface-alkylated synthetic nanocelluloses for structuring liquids

Nanocelluloses derived from natural cellulose sources are promising sustainable nanomaterials. Previous studies have reported that nanocelluloses are strongly adsorbed onto liquid-liquid interfaces with the concurrent use of ligands and allow for the structuring of liquids, that is, the kinetic trapping of nonequilibrium shapes of liquids. However, the structuring of liquids using nanocelluloses alone has yet to be demonstrated, despite its great potential in the development of sustainable liquid-based materials that are biocompatible and environmentally friendly. Herein, we demonstrated the structuring of liquids using rectangular sheet-shaped synthetic nanocelluloses with surface alkyl groups. Synthetic nanocelluloses with ethyl, butyl, and hexyl groups on their surfaces were readily prepared following our previous reports via the self-assembly of enzymatically synthesized cello-oligosaccharides having the corresponding alkyl groups. Among the alkylated synthetic nanocelluloses, the hexylated nanocellulose was adsorbed and jammed at water-n-undecane interfaces to form interfacial assemblies, which acted substantially as an integrated film for structuring liquids. These phenomena were attributed to the unique structural characteristics of the surface-hexylated synthetic nanocelluloses; their sheet shape offered a large area for adsorption onto interfaces, and their controlled surface hydrophilicity/hydrophobicity enhanced the affinity for both liquid phases. Our findings promote the development of all-liquid devices using nanocelluloses.

Tunable thermal diffusivity of silk protein assemblies based on their structural control and photo-induced chemical cross-linking

Silk, which has excellent mechanical properties and is lightweight, serves as a structural material in natural systems. However, the structural and functional applications of silk in artificial systems have been limited due to the difficulty in controlling its properties. In this study, we demonstrate the tunable thermal diffusivity of silk-based assemblies (films) based on secondary structural control and subsequent cross-linking. We found that the thermal diffusivity of the silk film is increased by the formation of β-sheet structures and dityrosine between Tyr residues adjacent to the β-sheet structures. Our results demonstrate the applicability of silk proteins as material components for thermally conductive biopolymer-based materials.

A Visible Light Cross-Linked Underwater Hydrogel Adhesive with Biodegradation and Hemostatic Ability

Hydrogel adhesives with integrated functionalities are still required to match their ever-expanding practical applications in the field of tissue repair and regeneration. A simple and effective safety strategy is reported, involving an in situ injectable polymer precursor and visible light-induced cross-linking. This strategy enables the preparation of a hydrogel adhesive in a physiological environment, offering wet adhesion to tissue surfaces, molecular flexibility, biodegradability, biocompatibility, efficient hemostatic performance, and the ability to facilitate liver injury repair. The proposed one-step preparation process of this polymer precursor involves the mixing of gelatin methacryloyl (GelMA), poly(thioctic acid) [P(TA)], poly(acrylic acid)/amorphous calcium phosphate (PAAc/ACP, PA) and FDA-approved photoinitiator solution, and a subsequent visible light irradiation after in situ injection into target tissues that resulted in a chemically-physically cross-linked hybrid hydrogel adhesive. Such a combined strategy shows promise for medical scenarios, such as uncontrollable post-traumatic bleeding.

Surface-mediated self-assembly of click-reactive cello-oligosaccharides for fabricating functional nonwoven fabrics

Polymer fabrics are versatile materials used in various fields. Surface modification methods for hydrophobic polymer fibers have been developed to endow the materials with water wettability and functionality. Nevertheless, it remains a challenge to freely introduce functional groups to polymer fiber surfaces in a simple manner. Herein, we report the decoration of nonwoven fabric surfaces with azidated cello-oligosaccharide assemblies via molecular self-assembly. Cello-oligosaccharides with a terminal azido group were enzymatically synthesized and allowed to self-assemble in polyolefin, polyester, and vinylon nonwoven fabrics. It was found that the functional oligosaccharides formed bark-like assemblies on the nonwoven fiber surfaces, probably through heterogeneous nucleation. The hydrophilic oligosaccharide assemblies made the hydrophobic nonwoven surfaces water-wettable. Moreover, the azido group at oligosaccharide terminal was available for the post-functionalization of the modified nonwovens. In fact, an antigen was successfully conjugated to the modified nonwovens via the click chemistry. The antigen-conjugated nonwovens were useful for the specific and quantitative detection of a corresponding antibody. Our findings demonstrate the great potential of cello-oligosaccharide assembly for the functionalization of fabrics and other polymeric materials.

Distinguishing anti-PEG antibodies by specificity for the PEG terminus using nanoarchitectonics-based antibiofouling cello-oligosaccharide platforms

The conjugation of poly(ethylene glycol) (PEG) to therapeutic proteins or nanoparticles is a widely used pharmaceutical strategy to improve their therapeutic efficacy. However, conjugation can make PEG immunogenic and induce the production of anti-PEG antibodies, which decreases both the therapeutic efficacy after repeated dosing and clinical safety. To address these concerns, it is essential to analyze the binding characteristics of anti-PEG antibodies to PEG. However, distinguishing anti-PEG antibodies is still a difficult task. Herein, we demonstrate the use of antibiofouling cello-oligosaccharide assemblies tethering one-terminal methoxy oligo(ethylene glycol) (OEG) ligands for distinguishing anti-PEG antibodies in a simple manner. The OEG ligand-tethering two-dimensional crystalline cello-oligosaccharide assemblies were stably dispersed in a buffer solution and had antibiofouling properties against nonspecific protein adsorption. These characteristics allowed enzyme-linked immunosorbent assays (ELISAs) to be simply performed by cycles of centrifugation/redispersion of aqueous dispersions of the assemblies. The simple assays revealed that the specific OEG ligand-tethering assemblies could distinguish anti-PEG antibodies to detect a specific antibody that preferentially binds to the methoxy terminus of the PEG chain with 3 repeating ethylene glycol units. Furthermore, quantitative detection of the antibodies was successfully performed with high sensitivity even in the presence of serum. The detectable and quantifiable range of antibody concentrations covered those required clinically. Our findings open a new avenue for analyzing the binding characteristics of anti-PEG antibodies in biological samples.

Antibacterial Synthetic Nanocelluloses Synergizing with a Metal-Chelating Agent

Antibacterial materials composed of biodegradable and biocompatible constituents that are produced via eco-friendly synthetic strategies will become an attractive alternative to antibiotics to combat antibiotic-resistant bacteria. In this study, we demonstrated the antibacterial properties of nanosheet-shaped crystalline assemblies of enzymatically synthesized aminated cellulose oligomers (namely, surface-aminated synthetic nanocelluloses) and their synergy with a metal-chelating antibacterial agent, ethylenediaminetetraacetic acid (EDTA). Growth curves and colony counting assays revealed that the surface-aminated cellulose assemblies had an antibacterial effect against Gram-negative Escherichia coli (E. coli). The cationic assemblies appeared to destabilize the cell wall of E. coli through electrostatic interactions with anionic lipopolysaccharide (LPS) molecules on the outer membrane. The antibacterial properties were significantly enhanced by the concurrent use of EDTA, which potentially removed metal ions from LPS molecules, resulting in synergistic bactericidal effects. No antibacterial activity of the surface-aminated cellulose assemblies was observed against Gram-positive Staphylococcus aureus even in the presence of EDTA, further supporting the contribution of electrostatic interactions between the cationic assemblies and anionic LPS to the activity against Gram-negative bacteria. Analysis using quartz crystal microbalance with dissipation monitoring revealed the attractive interaction of the surface-aminated cellulose assembly with LPS Ra monolayers artificially produced on the device substrate.

Suspension Culture System for Isolating Cancer Spheroids using Enzymatically Synthesized Cellulose Oligomers

Isolating cancer cells from tissues and providing an appropriate culture environment are important for a better understanding of cancer behavior. Although various three-dimensional (3D) cell culture systems have been developed, techniques for collecting high-purity spheroids without strong stimulation are required. Herein, we report a 3D cell culture system for the isolation of cancer spheroids using enzymatically synthesized cellulose oligomers (COs) and demonstrate that this system isolates only cancer spheroids under coculture conditions with normal cells. CO suspensions in a serum-containing cell culture medium were prepared to suspend cells without settling. High-purity cancer spheroids could be separated by filtration without strong stimulation because the COs exhibited antibiofouling properties and a viscosity comparable to that of the culture medium. When human hepatocellular carcinoma (HepG2) cells, a model for cancer cells, were cultured in the CO suspensions, they proliferated clonally and efficiently with time. In addition, only developed cancer spheroids from HepG2 cells were collected in the presence of normal cells by using a mesh filter with an appropriate pore size. These results indicate that this approach has potential applications in basic cancer research and cancer drug screening.

Identification of Water-Soluble Polymers through Machine Learning of Fluorescence Signals from Multiple Peptide Sensors

Recently, there has been growing concern about the discharge of water-soluble polymers (especially synthetic polymers) into the environment. Therefore, the identification of water-soluble polymers in water samples is becoming increasingly crucial. In this study, a chemical tongue system to simply and precisely identify water-soluble polymers using multiple fluorescently responsive peptide sensors was demonstrated. Fluorescence spectra obtained from the mixture of each peptide sensor and water-soluble polymer were changed depending on the combination of the polymer species and peptide sensors. Water-soluble polymers were successfully identified through the supervised or unsupervised machine learning of multidimensional fluorescence signals from the peptide sensors.

Synthetic Nanocelluloses Fluorescently Responsible to Enzymatic Degradation

Crystalline assemblies of cellulose and cellulose derivatives that can be synthetically produced by in vitro enzymatic reactions in a bottom-up manner have attracted increasing attention as chemically designable functional nanomaterials (e.g., synthetic nanocelluloses). In this study, we demonstrate the preparation and characterization of alkyl β-celluloside assemblies loaded with fluorescent molecules, which are fluorescently responsible to the enzymatic degradation of the cellulose moieties. The fluorescent properties are afforded to the assemblies by their bilayer-structured nanosheet morphologies realized through the uptake of environmentally responsive fluorescent molecules (namely, Nile Red (NR)). Incubation of the NR-loaded n-octyl β-celluloside (CEL-C₈) assembly with cellulase resulted in decreases in the fluorescence intensities. This suggests that NR molecules were released into the aqueous phase through enzymatic degradation of the cellulose moieties of CEL-C₈ molecules in the assembly. The fluorescence decrease rates were clearly dependent on the concentration and source of cellulase. Fluorescence decreases through enzymatic degradation were again observed in the presence of contaminant proteins. These observations revealed the high potential of alkyl β-celluloside assemblies loaded with fluorescent molecules as fluorescently responsible cellulase substrates for cellulase detection assays by simply measuring changes in the fluorescence intensities. Moreover, the assemblies were revealed as carriers for the controlled release of loaded molecules triggered by enzymatic degradation.

Photo-reactive polymers for the immobilisation of epidermal growth factors

Photo-reactive polymers are important for biomaterials, including devices with a 3D-structure. Here, different types of photo-reactive polymers were prepared and utilised for immobilisation of growth factors. They were synthesised by conjugation of gelatin with the azidophenyl group or by copolymerisation of the azidophenyl group-coupled methacrylate with poly(ethylene glycol) methacrylate. The azidophenyl content and the zeta potential of the prepared polymers were measured. After spin coating of polymers, the thickness and the water contact angle of coated layers were measured. The amount of the immobilised epidermal growth factor (EGF) was determined using fluorescence labelling. Cell adhesion responded to the nature of photo-reactive polymers but did not depend on the immobilised EGF. However, cell growth was dependent on the amount of immobilised EGF and was significantly affected by the nature of photo-reactive polymers. The study shows that the properties of the photo-immobilisation matrix significantly influence the biological activity.

Identification of Water-Soluble Polymers through Discrimination of Multiple Optical Signals from a Single Peptide Sensor

The pollution of water environments is a worldwide concern. Not only marine pollution by plastic litter, including microplastics, but also the spillage of water-soluble synthetic polymers in wastewater have recently gained increasing attention due to their potential risks to soil and water environments. However, conventional methods to identify polymers dissolved in water are laborious and time-consuming. Here, we propose a simple approach to identify synthetic polymers dissolved in water using a peptide-based molecular sensor with a fluorophore unit. Supervised machine learning of multiple fluorescence signals from the sensor, which specifically or nonspecifically interacted with the polymers, was applied for polymer classification as a proof of principle demonstration. Aqueous solutions containing different polymers or multiple polymer species with different mixture ratios were identified successfully. We found that fluorophore-introduced biomolecular sensors have great potential to provide discriminative information regarding water-soluble polymers. Our approach based on the discrimination of multiple optical signals of water-soluble polymers from peptide-based molecular sensors through machine learning will be applicable to next-generation sensing systems for polymers in wastewater or natural environments.

Self-assembly of cellulose for creating green materials with tailor-made nanostructures

Inspired by living systems, biomolecules have been employed in vitro as building blocks for creating advanced nanostructured materials. In regard to nucleic acids, peptides, and lipids, their self-assembly pathways and resulting assembled structures are mostly encoded in their molecular structures. On the other hand, outside of its chain length, cellulose, a polysaccharide, lacks structural diversity; therefore, it is challenging to direct this homopolymer to controllably assemble into ordered nanostructures. Nevertheless, the properties of cellulose assemblies are outstanding in terms of their robustness and inertness, and these assemblies are attractive for constructing versatile materials. In this review article, we summarize recent research progress on the self-assembly of cellulose and the applications of assembled cellulose materials, especially for biomedical use. Given that cellulose is the most abundant biopolymer on Earth, gaining control over cellulose assembly represents a promising route for producing green materials with tailor-made nanostructures.

Control of parallel versus antiparallel molecular arrangements in crystalline assemblies of alkyl β-cellulosides

HYPOTHESIS

The precise control of parallel versus antiparallel molecular arrangements in synthetic assemblies of biorelated molecules is an attractive research focus from both scientific and technological viewpoints. However, little is known about cellulose-based synthetic assemblies. We hypothesized the existence of potential parameters, such as temperature, salt concentration, salt species, and solvent species, for controlling the molecular arrangement in assemblies of alkyl β-cellulosides with different alkyl chain lengths.

EXPERIMENTAL

The self-assembly of alkyl β-cellulosides was triggered by neutralization-induced water insolubilization. The crystal structures of the cellulose moieties in the assemblies were characterized by attenuated total reflection-Fourier transform infrared absorption spectroscopy and wide-angle X-ray diffraction measurements. The morphologies of the assemblies were also characterized by scanning electron, atomic force, and transmission electron microscopy.

FINDINGS

The temperature for the self-assembly, the concentration and species of inorganic salt in the self-assembly solution, and the solvent species (namely, the addition of water-miscible organic solvents into the self-assembly solution) strongly affected the molecular arrangement of the assemblies. The observations suggested that hydrophobic effects between the alkyl groups of the alkyl β-cellulosides and/or interactions of the alkyl β-cellulosides with solvent species were potential factors for controlling the molecular arrangement.

Discovery of Surfactant-Like Peptides from a Phage-Displayed Peptide Library

Peptides with specific affinities for various materials have been identified in the past three decades and utilized in materials science and engineering. A peptide's capability to specifically interact with materials is not naturally derived but screened from a biologically constructed peptide library displayed on phages or cells. To date, due to limitations in the screening procedure, the function of screened peptides has been primarily limited to the affinity for target materials. Herein, we demonstrated the screening of surfactant-like peptides from a phage-displayed peptide library. A screened phage clone displaying a peptide showed high activity for accumulating at emulsion surfaces with certain assembled structures, resulting in stable emulsions. The surface tension for the solution of the chemically synthesized peptide decreased with increasing peptide concentration, demonstrating certain surface activity, which corresponded to the ability to decrease the surface tension of liquids (e.g., water), owing to the accumulation of molecules at the air-liquid or liquid-liquid interface. Peptides with a randomized sequence did not lower the surface tension, indicating the essential role of amino acid sequences in surface activity. Our strategy for identifying novel functional peptides from a phage-displayed peptide library can be used to expand the applicability of peptidyl materials and biosurfactants.

Aqueous Suspensions of Cellulose Oligomer Nanoribbons for Growth and Natural Filtration-Based Separation of Cancer Spheroids

In vitro growth of cancer spheroids (CSs) and the subsequent separation of CSs from a 2D or 3D cell culture system are important for fundamental cancer studies and cancer drug screening. Although biopolymer-based or synthetic hydrogels are suitable candidates to be used as 3D cell culture scaffolds, alternatives with better processing capabilities are still required to set up cell culture microenvironment. In this study, we show that aqueous suspensions of crystalline nanoribbons composed of cellulose oligomers have a potential for CS growth and separation. The nanoribbon suspensions in serum-containing cell culture media fixed single cancer cells and CSs with large sizes in a 3D space, leading to suspension cultures for CS growth corresponding to culture time. Well-grown CSs were easily separated from the suspensions by natural filtration using a mesh filter with a suitable pore size. Cell viability tests revealed negligible cytotoxicity of the nanoribbons. In addition, physical damages to CSs by the separation procedures were negligible. Stable suspensions of biocompatible nanomaterials will thus provide novel microenvironments for growth and separation of diverse cell aggregates.

Affinity-based thermoresponsive fluorescence switching of proteins conjugated with a polymer-binding peptide

The affinity-based thermoresponsive fluorescence switching of proteins conjugated with a polymer-binding peptide is demonstrated. The specific affinity of the peptide and thermoresponsive structural transitions of the polymer are essential for reliable fluorescence switching behavior.

Neutralization-Induced Self-Assembly of Cellulose Oligomers into Antibiofouling Crystalline Nanoribbon Networks in Complex Mixtures

Molecular self-assembly in solutions is a powerful strategy for fabricating functional architectures. Various bio(macro)molecules have been used as self-assembly components. However, structural polysaccharides, such as cellulose and chitin, have rarely been a research focus for molecular self-assembly, even though their crystalline assemblies potentially have robust physicochemical properties. Herein, we demonstrated the neutralization-induced self-assembly of cellulose oligomers into antibiofouling crystalline nanoribbon networks to produce physically cross-linked hydrogels. The self-assembly proceeded even in versatile complex mixtures, such as serum-containing cell culture media, in a controlled manner for 3D cell culture. The cultured cells grew into cell aggregates (spheroids), which were simply collected through natural filtration due to the mechanically crushable property of the crystalline nanoribbons through water flow by pipetting. We will show the potential of cellulose oligomers for biocompatible, crystalline soft materials.

Correction: Biocatalytic oligomerization-induced self-assembly of crystalline cellulose oligomers into nanoribbon networks assisted by organic solvents

[This corrects the article DOI: 10.3762/bjnano.10.173.].

Controlled assembly of filamentous viruses into hierarchical nano- to microstructures at liquid/liquid interfaces

Recently, viruses have been regarded as useful molecular assemblies for materials applications rather than as disease-causing agents. The orderly assembled structures of the viruses are highly related to the resultant properties and functions of the assemblies; however, methods to control the assembly are still limited. Here, we demonstrated the assembly of filamentous viruses into hierarchical nano- to microstructures at liquid/liquid interfaces through emulsification in a controlled manner. The viruses form fibrous nanostructures of several micrometers length, which are much longer than the original virus. Subsequently, the fibers self-assemble into well-packed ordered microstructures. Furthermore, the resultant hierarchically assembled structures showed long-term stability and potential applicability through the desired functionalization.

Assembly of filamentous viruses into hierarchical nano- to microstructures in a controlled manner was demonstrated using the liquid/liquid interface.

Affinity-Based Functionalization of Biomedically Utilized Micelles Composed of Triblock Copolymers through Polymer-Binding Peptides

Polymeric micelles and vesicles that are self-assembled from amphiphilic block copolymers are frequently used in biomedical applications. Poly(ethylene oxide) (PEO)-poly(propylene oxide) (PPO)-PEO, so-called Pluronic, is a Food and Drug Administration approved triblock copolymer utilized in biomedical applications. However, the control of drug loading and surface functionalization of micelles remain challenging due to structural limitations. In this study, Pluronic micelles with various structures were rationally functionalized via the PPO-binding peptide, which was previously identified using a biologically constructed peptide library displayed on filamentous phages. The interactions between the peptide and Pluronic micelles were characterized in detail based on fluorescence changes in an extrinsic fluorescence dye, and a sufficient PPO chain length of Pluronic was essential for the interactions. Furthermore, enzymatic degradation of the model substrate-conjugated peptide loaded into Pluronic micelles showed stable loading of the peptide. Importantly, the exposure level of the conjugated molecules to the peptide was dependent on the PEO chain length of Pluronic, suggesting controllable functionalization of polymeric micelles. Anticancer drug-conjugated peptide-loaded Pluronic micelles with suitable polymeric structures were applied in a cell culture assay. The anticancer efficacy of the loaded drugs can be controlled by the molecular design of the binding peptide and polymers. These results demonstrate that an affinity-based functionalization strategy may facilitate polymeric micelles for various biomedical applications.

Biocatalytic oligomerization-induced self-assembly of crystalline cellulose oligomers into nanoribbon networks assisted by organic solvents

Crystalline poly- and oligosaccharides such as cellulose can form extremely robust assemblies, whereas the construction of self-assembled materials from such molecules is generally difficult due to their complicated chemical synthesis and low solubility in solvents. Enzyme-catalyzed oligomerization-induced self-assembly has been shown to be promising for creating nanoarchitectured crystalline oligosaccharide materials. However, the controlled self-assembly into organized hierarchical structures based on a simple method is still challenging. Herein, we demonstrate that the use of organic solvents as small-molecule additives allows for control of the oligomerization-induced self-assembly of cellulose oligomers into hierarchical nanoribbon network structures. In this study, we dealt with the cellodextrin phosphorylase-catalyzed oligomerization of phosphorylated glucose monomers from ᴅ-glucose primers, which produce precipitates of nanosheet-shaped crystals in aqueous solution. The addition of appropriate organic solvents to the oligomerization system was found to result in well-grown nanoribbon networks. The organic solvents appeared to prevent irregular aggregation and subsequent precipitation of the nanosheets via solvation for further growth into the well-grown higher-order structures. This finding indicates that small-molecule additives provide control over the self-assembly of crystalline oligosaccharides for the creation of hierarchically structured materials with high robustness in a simple manner.

Temperature-Directed Assembly of Crystalline Cellulose Oligomers into Kinetically Trapped Structures during Biocatalytic Synthesis

Crystalline polysaccharides, such as cellulose and chitin, can form superior assemblies in terms of physicochemical stability and mechanical properties. However, their use as molecular building blocks for self-assembled materials is rare, possibly because each crystalline polysaccharide has its own unique monomer unit, preventing molecular design for controlling the self-assembly. Herein, we demonstrate the temperature-directed assembly of crystalline cellulose oligomers into kinetically trapped structures, namely, precipitated nanosheets, nanoribbon network hydrogels, and dispersed nanosheets (in descending order of temperature). It was found that enzymatically synthesized cellulose oligomers self-assembled in situ into those structures depending on the synthetic temperatures. Mechanistic studies suggested that the formation of the nanoribbon networks and the dispersed nanosheets at lower temperatures were driven by synergy between the decreased hydrophobic effect and the simultaneously induced self-crowding effect. Furthermore, nanoribbon network formation was exploited for the construction of cellulose oligomer-based hybrid gels with colloidal particles. Our findings promote the development of robust self-assembled materials composed of crystalline polysaccharides with highly ordered nano-to-macroscale structures.

Mechanically robust crystalline monolayer assemblies of oligosaccharide-based amphiphiles on water surfaces

Cellulose oligomers with a terminal alkyl group at the reducing end formed mechanically robust crystalline monolayers via self-assembly against water surfaces from aqueous solutions in air.

Assembly of reduced graphene oxides into a three-dimensional porous structure via confinement within robust cellulose oligomer networks

The assembly of nanomaterials into a networked superstructure is a strategy used to construct macroscopic porous materials having the functional properties of nanomaterials. However, because nanomaterials generally prefer densely packed assembled states owing to their high surface energies, the construction of a fine porous structure is still a challenge. In this study, we demonstrate the assembly of reduced graphene oxides (rGOs) into a fine porous structure via confinement within robust cellulose oligomer networks. The confinement of rGOs within cellulose oligomer networks was achieved in one step via the enzymatic synthesis of cellulose oligomers. When the resultant cellulose oligomer gels confining rGOs were reduced by hydrogen iodide, the robust cellulose oligomer networks served as a confinement space for rGOs, preventing excessive aggregation of the rGOs and thus encouraging their assembly into a fine porous structure. Electrochemical measurements revealed that the porous rGO materials could act as electrode materials for supercapacitors. Our strategy based on simple physical confinement will allow for the creation of functional porous materials with excellent nanomorphologies from various nanomaterials.

Reduced graphene oxides were assembled into a fine porous structure via confinement within robust cellulose oligomer networks.

High Thermal Diffusivity in Thermally Treated Filamentous Virus-Based Assemblies with a Smectic Liquid Crystalline Orientation

Polymers are generally considered thermal insulators because the amorphous arrangement of the polymeric chains reduces the mean free path of heat-conducting phonons. Recent studies reveal that individual chains of polymers with oriented structures could have high thermal conductivity, because such stretched polymeric chains effectively conduct phonons through polymeric covalent bonds. Previously, we have found that the liquid crystalline assembly composed of one of the filamentous viruses, M13 bacteriophages (M13 phages), shows high thermal diffusivity even though the assembly is based on non-covalent bonds. Despite such potential applicability of biopolymeric assemblies as thermal conductive materials, stability against heating has rarely been investigated. Herein, we demonstrate the maintenance of high thermal diffusivity in smectic liquid crystalline-oriented M13 phage-based assemblies after high temperature (150 °C) treatment. The liquid crystalline orientation of the M13 phage assemblies plays an important role in the stability against heating processes. Our results provide insight into the future use of biomolecular assemblies for reliable thermal conductive materials.

Macromolecular crowding for materials-directed controlled self-assembly

Macromolecular crowding refers to intracellular environments where various macromolecules, including proteins and nucleic acids, are present at high total concentrations. Its influence on biological processes has been investigated using a highly concentrated in vitro solution of water-soluble polymers as a model. Studies have revealed significant effects of macromolecular crowding on the thermodynamic equilibria and dynamics of biomolecular self-assembly in vivo. Recently, macromolecular crowding has attracted materials scientists, especially those in bio-related areas, as a tool to control molecular/colloidal self-assembly. Macromolecular crowding has been exploited to control the structure of supramolecular materials, assemble nanomaterials, and improve the performance of polymeric materials. Furthermore, nanostructured materials have been shown to be an interesting alternative to water-soluble polymers for creating crowded environments for controlled self-assembly. In this review article, we summarize recent progress in research on macromolecular crowding for controlled self-assembly in bio-related materials chemistry.

Synthetic Multifunctional Graphene Composites with Reshaping and Self-Healing Features via a Facile Biomineralization-Inspired Process

Since graphene is a type of 2D carbon material with excellent mechanical, electrical, thermal, and optical properties, the efficient preparation of graphene macroscopic assemblies is significant in the potentially large-scale application of graphene sheets. Conventional preparation methods of graphene macroscopic assemblies need strict conditions, and, once formed, the assemblies cannot be edited, reshaped, or recycled. Herein, inspired by the biomineralization process, a feasible approach of shapeable, multimanipulatable, and recyclable gel-like composite consisting of graphene oxide/poly(acrylic acid)/amorphous calcium carbonate (GO-PAA-ACC) is designed. This GO-PAA-ACC material can be facilely synthesized at room temperature with a cross-linking network structure formed during the preparation process. Remarkably, it is stretchable, malleable, self-healable, and easy to process in the wet state, but tough and rigid in the dried state. In addition, these two states can be readily switched by adjusting the water content, which shows recyclability and can be used for 3D printing to form varied architectures. Furthermore, GO-PAA-ACC can be functionalized or processed to meet a variety of specific application requirements (e.g., energy-storage, actuators). The preparation method of GO-PAA-ACC composite in this work also provides a novel strategy for the versatile macroscopic assembly of other materials, which is low-cost, efficient, and convenient for broad application.

Filamentous Virus-based Assembly: Their Oriented Structures and Thermal Diffusivity

Organic polymers are generally regarded as thermal insulators because amorphous arrangement of molecular chains reduces the mean free path of heat-conducting phonons. However, recent studies indicated that single chains of polymers with highly oriented structures could have high thermal conductivity than bulk polymers because stretched polymer chains effectively conduct phonons through polymeric covalent bonds. Here, we demonstrated the possibility of non-covalent virus assembly prepared by simple flow-induced methods toward high thermal conductive polymeric materials. Films with high thermal diffusivity composed of non-covalent bond-based assemblies of liquid crystalline filamentous viruses were prepared using a simple flow-induced orientation method. Structural and thermal characterization demonstrated that highly oriented structures of the viruses in the film were attributed to the high thermal diffusivity. Our results will open attractive opportunities for biomolecular-based thermally conductive soft materials even though the assemblies are based on non-covalent bonds.

Bioinspired structural transition of synthetic polymers through biomolecular ligand binding

The bioinspired structural transition of thermoresponsive poly(N-isopropylacrylamide) was demonstrated by specific ligand binding of artificially evolved peptides to the polymer.

Self-Assembly of Cellulose Oligomers into Nanoribbon Network Structures Based on Kinetic Control of Enzymatic Oligomerization

The ability to chemically synthesize desired molecules followed by their in situ self-assembly in reaction solution has attracted much attention as a simple and environmentally friendly method to produce self-assembled nanostructures. In this study, α-d-glucose 1-phosphate monomers and cellobiose primers were subjected to cellodextrin phosphorylase-catalyzed reverse phosphorolysis reactions in aqueous solution in order to synthesize cellulose oligomers, which were then in situ self-assembled into crystalline nanoribbon network structures. The average degree-of-polymerization (DP) values of the cellulose oligomers were estimated to be approximately 7-8 with a certain degree of DP distribution. The cellulose oligomers crystallized with the cellulose II allomorph appeared to align perpendicularly to the base plane of the nanoribbons in an antiparallel manner. Detailed analyses of reaction time dependence suggested that the production of nanoribbon network structures was kinetically controlled by the amount of water-insoluble cellulose oligomers produced.