Preparation of Boronic Acid-Functionalized Cryogels Using Modular and Clickable Building Blocks for Bacterial Separation

Phenylboronic acid functionalized magnetic ferroferric oxide nanoparticles and capillary electrophoresis for efficient isolation of flavonoid compounds from leaves of Lonicera japonica Thunb

Flavonoids are bioactive components in natural products, which possess anti-inflammatory, antibacterial, antioxidant, and cardiovascular protective properties. However, due to the complexity and low content of the components in these samples, developing rapid and sensitive methods for the isolation and extraction of flavonoids still remains a challenge in medical and food science. Herein, a 4-formylphenylboronic acid functionalized magnetic Fe3O4 nanomaterial (Fe3O4@FPBA) was synthesized and applied as a sorbent of magnetic solid-phase extraction (MSPE) to covalently extract flavonoids from leaves of Lonicera japonica Thunb.. The structure, morphology and magnetic properties of Fe3O4@FPBA particles were characterized by fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and scanning electron microscope (SEM) technologies. Employing luteoloside, luteolin, lonicerin, hyperoside, quercetin and rutin as model compounds, Fe3O4@FPBA as sorbent, a MSPE coupling with capillary electrophoresis (CE) method was developed and optimized to detect the flavonoids. Adsorption kinetics display that the adsorption of flavonoids by Fe3O4@FPBA is in line with the Quasi-second-order model, which is controlled by chemisorption mechanism, with the equilibrium adsorption capacity ranging from 3.66 to 6.16 mg/g. The isothermal adsorption model shows that the adsorption is more consistent with Freundlich isotherm equation, and the exponent n is around 1. In addition, the material was applied to the leaves of Lonicera japonica Thunb. extract. Four kinds of flavonoids and three other o-hydroxyl compounds were covalently extracted and magnetically separated. Moreover, the material can still maintain high adsorption properties after recycling 5 times. The material possesses strong magnetism and boric acid ligands, which can realize rapid and high-capacity separation and enrichment of flavonoids in liquid samples. Therefore, the strategy offers an innovative method for the extraction and purification of flavonoids from complex natural plants and also provides a research basis for the discovery of new medicinal compounds based on natural products.

Surface functionalized cryogels - characterization methods, recent progress in preparation and application

Cryogels are polymeric materials with a sponge-like microstructure and have attracted significant attention in recent decades. Research has focused on their composition, fabrication techniques, characterization methods as well as potential or existing fields of applications. The use of functional precursors or functionalizing ligands enables the preparation of cryogels with desired properties such as biocompatibility or responsivity. They can also exhibit adsorptive properties or can be used for catalytical purposes. Although a very brief overview about several functional (macro-)monomers and functionalizing ligands has been provided by previous reviewers for certain cryogel applications, so far there has been no particular focus on the evaluation of the functionalization success and the characterization methods used. This review will provide a comprehensive overview of different characterization methods most recently used for the evaluation of cryogel functionalization. Furthermore, new functional (macro-)monomers and subsequent cryogel functionalization strategies are discussed, based on synthetic polymers, biopolymers and a combination of both. This review highlights the importance of the functionalization aspect in cryogel research in order to produce materials with tailored properties for certain applications.

Cryogel with Modular and Clickable Building Blocks: Toward the Ultimate Ideal Macroporous Medium for Bacterial Separation

The lack of practical platforms for bacterial separation remains a hindrance to the detection of bacteria in complex samples. Herein, a composite cryogel was synthesized by using clickable building blocks and boronic acid for bacterial separation. Macroporous cryogels were synthesized by cryo-gelation polymerization using 2-hydroxyethyl methacrylate and allyl glycidyl ether. The interconnected macroporous architecture enabled high interfering substance tolerance. Nanohybrid nanoparticles were prepared via surface-initiated atom transfer radical polymerization and immobilized onto cryogel by click reaction. Alkyne-tagged boronic acid was conjugated to the composite for specific bacteria binding. The physical and chemical characteristics of the composite cryogel were analyzed systematically. Benefitting from the synergistic, multiple binding sites provided by the silica-assisted polymer, the composite cryogel exhibited excellent affinity toward S. aureus and Salmonella spp. with capacities of 91.6 × 107 CFU/g and 241.3 × 107 CFU/g in 0.01 M PBS (pH 8.0), respectively. Bacterial binding can be tuned by variations in pH and temperature and the addition of monosaccharides. The composite was employed to separate S. aureus and Salmonella spp. from spiked tap water, 40% cow milk, and sea cucumber enzymatic hydrolysate, which resulted in high bacteria separation and demonstrated remarkable potential in bacteria separation from food samples.

In Situ Preparation of Star-Shaped Protein-"Smart" Polymer Conjugates with pH and Thermo-Dual Responsibility for Bacterial Separation

To achieve effective separation and enrichment of bacteria, a novel synthetic scheme was developed to synthesize star-style boronate-functionalized copolymers with excellent hydrophilicity and temperature and pH responsiveness. A hydrophilic copolymer brush was synthesized by combining surface-initiated atom-transfer radical polymerization with amide reaction using bovine serum albumin as the core. The copolymer brush was further modified by introducing and immobilizing fluorophenylboronic acids through an amide reaction, resulting in the formation of boronate affinity material BSA@poly(NIPAm-co-AGE)@DFFPBA. The morphology and organic content of BSA@poly(NIPAm-co-AGE)@DFFPBA were systematically characterized. The BSA-derived composites demonstrated a strong binding capacity to both Gram-positive and Gram-negative bacteria. The binding capabilities of the affinity composite to Staphylococcus aureus and Salmonella spp. were 195.8 × 1010 CFU/g and 79.2 × 1010 CFU/g, respectively, which indicates that the novel composite exhibits a high binding capability to bacteria and shows a particularly more significant binding capacity toward Gram-positive bacteria. The bacterial binding of BSA@poly(NIPAm-co-AGE)@DFFPBA can be effectively altered by adjusting the pH and temperature. This study demonstrated that the star-shaped affinity composite had the potential to serve as an affinity material for the rapid separation and enrichment of bacteria in complex samples.

Hierarchical Macroporous Agarose Materials with Polyethyleneimine-Assisted Multiple Boronate Affinity Binding Sites for the Separation of Neomycin

Quantification of neomycin residues in food samples demands an efficient purification platform. Herein, hierarchical macroporous agarose monoliths with multiple boronate affinity sites were established for selective separation of neomycin. The silica core was synthesized by "one-step" Stöber procedures followed by modification with amino group and incorporation of polyethyleneimine. A versatile macroporous agarose monolith was prepared by emulsification strategies and functionalized with epoxy groups. After introducing polyethyleneimine-integrated silica nanoparticles onto the agarose monolith, fluorophenylboronic acids were immobilized. The physical and chemical characteristics of the composite monolith were analyzed systematically. After optimization, neomycin showed high binding ability of 23.69 mg/g, and the binding capacity can be manipulated by changing the pH and adding monosaccharides. The composite monolith was subsequently utilized to purify neomycin from the spiked model aquatic products followed by high-performance liquid chromatography analysis, which revealed a remarkable neomycin purification effect, indicating the great potential in the separation of neomycin from complicated aquatic products.

Rapid and Sensitive Fluorescence Detection of Staphylococcus aureus Based on Polyethyleneimine-Enhanced Boronate Affinity Isolation

There are increasing demands for fast and simple detection of pathogens in foodstuffs. Fluorescence analysis has demonstrated significant advantages for easy operation and high sensitivity, although it is usually hindered by a complex matrix, low bacterial abundance, and long-term bacterial enrichment. Effective enrichment procedures are required to meet the requirements for food detection. Here, boronate-functionalized cellulose filter paper and specific fluorescent probes were combined. An integrated approach for the enrichment of detection of Staphylococcus aureus was proposed. The modification of polyethyleneimine demonstrated a significant effect in enhancing the bacterial enrichment, and the boronate affinity efficiency of the paper was increased by about 51~132%. With optimized conditions, the adsorption efficiency for S. aureus was evaluated as 1.87 × 10⁸ CFU/cm², the linear range of the fluorescent analysis was 10⁴ CFU/mL~10⁸ CFU/mL (R² = 0.9835), and the lowest limit of detection (LOD) was calculated as 2.24 × 10² CFU/mL. Such efficiency was validated with milk and yogurt samples. These results indicated that the material had a high enrichment capacity, simple operation, and high substrate tolerance, which had the promising potential to be the established method for the fast detection of food pathogens.

Dimethylsulfoniopropionate decorated cryogels as synthetic spatially structured habitats of marine bacterial communities

In microbial consortia bacteria often settle on other organisms that provide nutrients and organic material for their growth. This is true for the plankton where microalgae perform photosynthesis and exude metabolites that feed associated bacteria. The investigation of such processes is difficult since algae provide bacteria with a spatially structured environment with a gradient of released organic material that is hard to mimic. Here we introduce the design and synthesis of a cryogel-based microstructured habitat for bacteria that provides dimethylsulfoniopropionate (DMSP) as a carbon and sulfur source for growth. DMSP, a widely distributed metabolite released by algae, is thereby made available for bacteria in a biomimetic manner. Based on a novel DMSP derived building block (DMSP-HEMA), we synthesized cryogels providing structured surfaces for settlement and delivering the organic material fueling bacterial growth. By monitoring bacterial settlement and performance we show that the cryogels represent microbial arenas mimicking the ecological situation in the plankton.

The specific biopanning of single-domain antibody against haptens based on a functionalized cryogel

Phage display technology is commonly applied for high-throughput screening of single-domain antibodies (sdAbs), and the problem of non-specific adsorption caused by carrier proteins seriously affects the biopanning of single-domain antibodies specific to haptens. In this paper, enrofloxacin (ENR)-functionalized cryogels were prepared by the ethylenediamine (EDA) and carbodiimide methods for application in the biopanning of ENR-specific phages. To improve the efficiency of biopanning, double blocking, a wash solution flow rate of 1 mL/min, and phage pre-incubation were applied to the biopanning process through single-factor experiments. Results of flat colony counting showed that the phage output of AG-ENR cryogels was 15 times higher than that of AG cryogels for the same input amount. And seven complete sequences of ENR-specific shark sdAbs were obtained by monoclonal phage ELISA and sequence alignment. All these results indicate that functionalized cryogels could be used as a novel and efficient method for phage biopanning for single-domain antibodies to haptens.

Freezing-triggered gelation of quaternized chitosan reinforced with microfibrillated cellulose for highly efficient removal of bilirubin

The highly efficient removal of bilirubin from blood by hemoperfusion for liver failure therapy remains a challenge in the clinical field due to the low adsorption capacity and poor hemocompatibility of currently used carbon-based adsorbents. Polysaccharide-based cryogels seem to be promising candidates for hemoperfusion adsorbents owing to their inherited excellent hemocompatibility. However, the weak mechanical strength and relatively low adsorption capacity of polysaccharide-based cryogels limited their application in bilirubin adsorption. In this work, we presented a freezing-triggered strategy to fabricate QCS/MFC cryogels, which were formed by quaternized chitosan (QCS) crosslinked with divinylsulfonyl methane (BVSM) and reinforced with microfibrillated cellulose (MFC). Ice crystal exclusions triggered the chemical crosslinking to generate the cryogels with dense pore walls. The obtained QCS/MFC cryogels were characterized by FTIR, SEM, stress-strain test, and hemocompatibility assay, which exhibited interconnected macroporous structures, excellent shape-recovery and mechanical performance, and outstanding blood compatibility. Due to the quaternary ammonium functionalization of chitosan, the QCS/MFC showed a high adsorption capacity of 250 mg g^-1 and a short adsorption equilibrium time of 3 h. More importantly, the QCS/MFC still exhibited high adsorption efficiency (over 49.7%) in the presence of 40 g L^-1 albumin. Furthermore, the QCS/MFC could also maintain high dynamic adsorption efficiency in self-made hemoperfusion devices. This facile approach provides a new avenue to develop high-performance hemoperfusion adsorbents for bilirubin removal, showing great promise for the translational therapy of hyperbilirubinemia.

Preparation of nickel-chelated iminodiacetate-functionalized macroporous agarose monolith using modular and clickable building blocks for affinity separation of histidine-tagged recombinant proteins

Selective separation and purification of protein from complex medium is required to completely investigate the structure and function of the target protein. In this study, a composite macroporous agarose monolith containing iminodiacetate-chelated Ni²⁺ ligands was synthesized for selective separation and purification of histidine-tagged recombinant proteins. The large and interconnected pores in the monolith enabled fast binding of proteins with high matrix tolerance in treating complex mediums. To realize the selective protein binding, the iminodiacetate was directly conjugated to epoxy-functionalized agarose monolith via simple chemical reactions between epoxy and imino groups. After chelated Ni²⁺, the composite monolith could bind histidine-tagged recombinant proteins through the coordination interaction between transition metal ions and the imidazole ring of histidine. To further increase the binding capacities of the monolith, a hydrophilic intermediate polymer chain containing multiple iminodiacetate immobilization sites was conjugated to the azide-functionalized agarose monolith via Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction. The morphology and chemical composition of the composite agarose monolith were characterized systematically. The protein binding capacities of the obtained composite agarose monolith were subsequently investigated. The binding capacities of the composite agarose monolith towards the model proteins Gp10 and Lys84 were 0.93 and 0.51 mg/mL, respectively. The protein binding of the composite agarose monolith could be manipulated by adjusting the temperature and concentrations of imidazole. These results demonstrate that the composite agarose monolith could be used as an affinity medium for rapid separation and purification of histidine-tagged recombinant proteins from biological samples.

Fabrication of copolymer brushes grafted superporous agarose gels: Towards the ultimate ideal particles for efficient affinity chromatography

A composite immobilized-metal affinity agarose particle was designed for the selective separation and purification of histidine-tagged proteins from complicated biological samples. The composite particle was constructed using superporous agarose particles as supporting matrix, flexible copolymer brushes as scaffolds to render higher ligand densities, and Ni²⁺-chelated iminodiacetic acids as recognition elements. Superporous agarose composite particles endow high permeability and interfering substance tolerance. The copolymer brush was prepared by surface-initiated atom transfer radical polymerization of N-isopropylacrylamide and glycidyl methacrylate, followed by iminodiacetic acids and Ni²⁺ ions. The physical and chemical properities of the composite particle were thoroughly investigated. The composite particles were shown to be able to selectively separate histidine-tagged recombinant proteins in the presence of high quantities of interfering chemicals in a model protein-binding experiment. By altering the temperature, the protein binding of the composite particles can be modulated. The superporous agarose particles supported polymer brush enables fast and efficient separation and purification of target proteins with high permeability, low backpressure, and high interfering matrix tolerance, which pave the path for bioseparation through designing and fabrication of novel agarose particles-based functional materials.

Affinity monolith chromatography: A review of general principles and recent developments

Affinity monolith chromatography (AMC) is a liquid chromatographic technique that utilizes a monolithic support with a biological ligand or related binding agent to isolate, enrich, or detect a target analyte in a complex matrix. The target-specific interaction exhibited by the binding agents makes AMC attractive for the separation or detection of a wide range of compounds. This article will review the basic principles of AMC and recent developments in this field. The supports used in AMC will be discussed, including organic, inorganic, hybrid, carbohydrate, and cryogel monoliths. Schemes for attaching binding agents to these monoliths will be examined as well, such as covalent immobilization, biospecific adsorption, entrapment, molecular imprinting, and coordination methods. An overview will then be given of binding agents that have recently been used in AMC, along with their applications. These applications will include bioaffinity chromatography, immunoaffinity chromatography, immobilized metal-ion affinity chromatography, and dye-ligand or biomimetic affinity chromatography. The use of AMC in chiral separations and biointeraction studies will also be discussed.