Bispecific Monoclonal Antibody-Based Multianalyte ELISA for Furaltadone Metabolite, Malachite Green, and Leucomalachite Green in Aquatic Products

Monospecific, ultrasensitive, and quantitative lateral flow immunoassay for dibutyl phthalate via epitopes rational design strategies

Due to the characteristics of long-term persistence, leading to extensive temporal and spatial distribution of the environmental pollutant dibutyl phthalate (DBP), analyzing of a large number of food and environment samples over a long period and at a high frequency must be necessary. It is of great significance to construct a simple, rapid, sensitive and high-throughput immunoassay method. For the first time, 8 different DBP hapten molecules were designed using computer simulation to provide DBP epitope informations from both conformation and electrostatic aspects for the target molecule. This approach helped to establish a reasonable hapten design strategy while reducing the cost and increasing the success rate of producing the required high-specificity and high-sensitivity DBP antibodies. Hapten DBP-1 was proposed, and the effectiveness of computer-aided hapten DBP-1 design was further verified by mouse antiserum experiments. A highly-specific monoclonal antibody (mAb) against DBP with an IC50 value of 19.8 ng/mL was obtained by mAb screening with enhanced matrix effect. A colloidal gold immunochromatographic test strip (CIS) which can be used to detect DBP in environmental, food and human urine samples was further prepared, and the DBP content in positive samples such as water, soil, and liquor samples could be rapidly analyzed within 15 min, which were basically consistent with the data by Gas Chromatography-Mass Spectrometry (GC-MS). In summary, our study proposed a detection method that can be directly used to detect DBP in environmental water, soil, liquor and human urine samples, which is ready for application in environmental monitoring, food safety control and clinical use.

Rapid identification and quantitative analysis of malachite green in fish via SERS and 1D convolutional neural network

Rapid and quantitative detection of malachite green (MG) in aquaculture products is very important for safety assurance in food supply. Here, we develop a point-of-care testing (POCT) platform that combines a flexible and transparent surface-enhanced Raman scattering (SERS) substrate with deep learning network for achieving rapid and quantitative detection of MG in fish. The flexible and transparent SERS substrate was prepared by depositing silver (Ag) film on the polydimethylsiloxane (PDMS) film using laser molecular beam epitaxy (LMBE) technique. The wrinkled Ag NPs@PDMS film exhibits high SERS activity, excellent reproducibility and good mechanical stability. Additionally, the fast in situ detection of MG residues onfishscales was achieved by using the wrinkled Ag NPs/PDMS film and a portable Raman spectrometer, with a minimum detectable concentration of 10-6 M. Subsequently, a one-dimensional convolutional neural network (1D CNN) model was constructed for rapid quantification of MG concentration. The results demonstrated that the 1D CNN quantitative analysis model possessed superior predictive performance, with a coefficient of determination (R2) of 0.9947 and a mean squared error (MSE) of 0.0104. The proposed POCT platform, integrating a transparent flexible SERS substrate, a portable Raman spectrometer and a 1D CNN model, provides an efficient strategy for rapid identification and quantitative analysis of MG in fish.

A highly selective dual-signal response ratiometric fluorescence sensing strategy for malachite green in fish based on carbon dots/copper nanoclusters nanocomposite

Malachite green (MG), a widely used antiparasitic agent, poses health risks to human due to its genotoxic and carcinogenic properties. Herein, a stable dual-emission fluoroprobe of carbon dots/copper nanoclusters is prepared for highly selective detection of MG based on the inner filter effect. This probe exhibits characteristic emission bands at 435 and 625 nm when excited at 376 nm. After adding MG, the both emission signals were significantly quenched, and the ratio of fluorescence intensity (F435/F625) was linearly related to the concentration of MG in the range of 0.05-40 μmol L-1 with a limit of detection of 18.2 nmol L-1. Meanwhile, the two signals exhibit linear relationships with the concentration of MG, respectively, and the corresponding detection results were consistent. The fluoroprobe was successfully used for the detection of MG in fish samples with the recoveries ranging from 96.0% to 103.8% and a relative standard deviation of <3.3%.

Surface-designed AuNPs-based fluorescent probe for ultra-sensitive detection of oral poultry antibacterial drug furaltadone via intermolecular hydrogen bonding

Furaltadone (FTD), a nitrofuran drug, was primarily utilized as a very effective oral veterinary antibiotic, especially in poultry production farms. As a result, FTD, a form of carcinogen, might easily enter people via the food chain, leading to fatal cancers. As a result, it is critical to develop a quick and efficient approach for detecting FTD at extremely low concentrations. Considering the aforementioned purpose, pamoic acid (PA) capped gold nanoparticles (PA@AuNPs) were synthesized in spherical morphology (size 10-15 nm) using the method of chemical reduction and used as a fluorescent probe to detect FTD. The interaction between PA@AuNPs and FTD was validated by UV-vis, XRD, and FTIR methods. Microscopic images (FESEM and HRTEM) show that PA@AuNPs have varying morphologies including rod, triangle, hexagonal, and pentagonal, and average sizes of 20-50 nm after sensing FTD. The average surface roughness of PA@AuNPs was determined to be 46.75 nm using the AFM technique. The addition of FTD (0 → 100 μM) quenched the fluorescence emission intensity of PA@AuNPs at 436 nm (λ ex 353 nm) by 4-fold. This static quenching was confirmed by the formation of a ground state complex, PA@AuNPs·FTD, between AuNPs and FTD using fluorescence lifetime analysis. The presence of an isosbestic point at 412 nm in the UV-visible titration, as well as FTIR data, further demonstrated the existence of this ground state complex. PA@AuNPs revealed high sensitivity (LoD = 9.78 nM; K a = 1.0615 × 102 M-1) to FTD in water, resulting in a decrease in predicted quantum yield (Φ F) from 3.36% to 0.35%. To establish PA@AuNPs as a first-generation fluorescence probe for real samples, FTD in blood serum was measured (LoD = 6.07 nM; K a = 1.0595 × 102 M-1). The non-toxic cytotoxicity and bioimaging in live zebrafish broadened the practical uses of PA@AuNPs. Furthermore, the surface interactions between PA@AuNPs and FTD were studied theoretically using time-dependent density functional theory (TD-DFT) at the B3LYP/6-31G(d,p) level of theory to support the findings from the experiment.

Computerized analysis of haptens for the ultrasensitive and specific detection of Pyriftalid

Pyriftalid (Pyr) is one of the most commonly used herbicides and due to its widespread and improper use, it has led to serious pollution of groundwater, soil and other ecosystems, threatening human health. A rapid method to detect Pyr was urgently needed. A high specific monoclonal antibody (mAb) against Pyr with IC50 values of 4.7 ng/mL was obtained by mAb screening technique and method with enhanced matrix effect. The study firstly proposed colloidal gold immunochromatographic test strips (CGIA) for Pyr, which enables rapid qualitative and quantitative determination of a large number of samples anytime and anywhere, so as to effectively monitor Pyr in environment and grain samples. Based on the properties of the desired Pyr antibody, the hapten Pyr-hapten-4 with high structural similarity to Pyr molecule, similar electrostatic potential distribution, and the ability to expose Pyr functional groups was screened out from five different Pyr haptens, which was consistent with mouse antiserum test. The CGIA quickly analyze the Pyr content in positive samples such as water samples, soil samples, paddy samples, brown rice samples within 10 min, the LOD for Pyr by CGIA as low as 1.84 ng/g, the v LOD value as low as 6 ng/g, and the extinction value as low as 25 ng/g. The content of positive samples detected by CGIA was consistent with the quantitative results of LC-MS/MS, the relative accuracy was within the range of 97-103 %. The recovery rate range for Pyr by CGIA was 92.0-99.7 %, and the coefficient of variation was between 1.30-8.56 %. It indicated Pyr-targeted CGIA test strip was an efficient and fast detection method to detect real environment and food samples.

A highly sensitive hyperbranched Au plasmonic blackbody immunochromatographic assay for detection of leucomalachite green in fish and shrimp

A novel immunochromatographic assay (ICA) based on hyperbranched Au plasmonic blackbodies (AuPBs) with a smartphone readout was fabricated for the detection of leucomalachite green (LMG) in fish and shrimp products. The ICA was carried out in a competitive immunoassay format with AuPBs as labels. The developed AuPBs-ICA allowed for the LMG detection with a low detection limit (0.15 μg L-1) within 5 min by the smartphone reader. With the label-AuPBs ICA, the color intensity response was linearly related to the concentrations of the LMG (0.2 -1.7 μg L-1). The test line signal could be clearly distinguished at a 1.7 μg L-1 LMG as a cut-off level by the naked eye, which is lower than the conventional colloidal gold nanoparticle (2 μg L-1) and star-shaped nanoparticles (1.9 μg L-1) labeling. LMG contamination in samples was determined with the proposed AuPBs-ICA and the enzyme-linked immunosorbent (ELISA). The AuPBs-ICA results showed good agreement with those from the ELISA. The proposed AuPBs-ICA has the potential to be used as a rapid, sensitive, and simple device for the analysis of LMG residues in fish and shrimp samples.

A bispecific nanobody with high sensitivity/efficiency for simultaneous determination of carbaryl and its metabolite 1-naphthol in the soil and rice samples

The simultaneous determination of carbaryl and its metabolite 1-naphthol is essential for risk assessment of pesticide exposure in agricultural and environmental samples. Herein, several bispecific nanobodies (BsNbs) with different lengths of hydrophilic linkers and junction sites were prepared and characterized for the simultaneous recognition of carbaryl and its metabolite 1-naphthol. It was found that the affinity of BsNbs to the analytes could be regulated by controlling linker length and linking terminal. Additionally, molecular simulation revealed that linker lengths affected the conformation of BsNbs, leading to alteration in sensitivity. The BsNb with G4S linker, named G4S-C-N-VHH, showing good thermal stability and sensitivity was used to develop a bispecific indirect competitive enzyme-linked immunosorbent assay (Bic-ELISA). The assay demonstrated a limit of detection of 0.8 ng/mL for carbaryl and 0.4 ng/mL for 1-naphthol in buffer system. Good recoveries from soil and rice samples were obtained, ranging from 80.0% to 112.7% (carbaryl) and 76.5%-110.8% (1-naphthol), respectively. Taken together, this study firstly provided a BsNb with high sensitivity and efficiency against environmental pesticide and its metabolite, and firstly used molecular dynamics simulation to explore the influence of linker on recognition. The results are valuable for the application of immunoassay with high efficiency in the fields of environment and agriculture.

Quantitative detection of malachite green in sediment by a time-resolved immunofluorescence method combined with a portable 3D printing equipment platform

Rapid detection technology of aquaculture fishery drug residues is needed to supplement large-scale instrument methods. To do this, the time-resolved fluorescence immunoassay (TRFIA) method and portable three-dimensional (3D) printing equipment platform were used, in combination with smartphones, to detect malachite green (MG) in pond sediments. The TRFIA was coupled to MG monoclonal antibodies (mAb) through lanthanide metal microspheres europium (Eu³⁺). The labeled antibody produced competitive immunity in the immune reaction system, and the specific fluorescence intensity in the product was determined by a portable 3D printing equipment platform to achieve quantitative analysis. To test this method, leucomalachite green (LMG) was converted to MG by oxidation of dicyanoquinone (DDQ), and a qualitative analysis was achieved. Methodological evaluation results were satisfactory, recoveries were 83 %-104 %, the limit of detection (LOD) was 0.3 ng/g, the limit of quantitation (LOQ) was 0.7 ng/g, and the coefficient of variation was 1.3 %-7.3 %. The linear equation y = -0.1496x + 0.5585 was in the range of 0-10 ng/g. The linear regression correlation coefficient was 99.2 %. The TRFIA was confirmed and positive samples were measured. Results were consistent with the standard method, which demonstrated that the TRFIA was feasible and that the detection results were reliable. Compared with the national standard method, the TRFIA saves time, is more convenient, and has high sensitivity. It provides an efficient technical method for the rapid screening of MG in the sediments of aquaculture environments.

Dummy Template-Based Molecularly Imprinted Membrane Coating for Rapid Analysis of Malachite Green and Its Metabolic Intermediates in Shrimp and Fish

A novel malachite green molecularly imprinted membrane (MG-MIM) with specific selectivity for malachite green (MG) and leucomalachite green (LMG) was prepared using a hydrophobic glass fiber membrane as the polymer substrate, methyl violet as a template analog, 4-vinyl benzoic acid as the functional monomer, and ethyleneglycol dimethacrylate as the crosslinking agent. MG-MIM and non-imprinted membrane (NIM) were structurally characterized using scanning electron microscopy, surface area analyzer, Fourier-transform infrared spectrometer and synchronous thermal analyzer. The results showed that MG-MIM possessed a fluffier surface, porous and looser structure, and had good thermal stability. Adsorption properties of MG-MIM were investigated under optimal conditions, and adsorption equilibrium was reached in 20 min. The saturated adsorption capacities for MG and LMG were 24.25 ng·cm^-2 and 13.40 ng·cm^-2, and the maximum imprinting factors were 2.41 and 3.20, respectively. Issues such as "template leakage" and "embedding" were resolved. The specific recognition ability for the targets was good and the adsorption capacity was stable even after five cycles. The proposed method was successfully applied for the detection of MG and LMG in real samples, and it showed good linear correlation in the range of 0 to 10.0 μg·L^-1 (R² = 0.9991 and 0.9982), and high detection sensitivity (detection limits of MG and LMG of 0.005 μg/kg and 0.02 μg·kg^-1 in shrimp, and 0.005 μg/kg and 0.02 μg/kg in fish sample). The recoveries and relative standard deviations were in the range of 76.31-93.26% and 0.73-3.72%, respectively. The proposed method provides a simple, efficient and promising alternative for monitoring MG and LMG in aquatic products.

Fusion of binary split allosteric aptasensor for the ultra-sensitive and super-rapid detection of malachite green

The complicated labeling procedure and high cost of split aptasensors have hitherto limited their application in the detection of hazardous substances. Herein we report the first examples of label-free aptasensors based on the fusion of a binary split G-quadruplex and malachite green (MG) aptamer, transducing recognition events into fluorescent signals through the allosteric regulation of the aptamer to achieve selective and sensitive detection. Specifically, RNA MGA was successfully converted into DNA MGA with comparable affinity and improved stability, thereby overcoming the limitations of poor stability and high expense. We subsequently split the DNA MGA and attached them to a G-rich DNA sequence at the 5' and 3' ends, to construct the binary split allosteric aptasensor. The performance of the binary split aptasensor for MG detection was significantly improved based on proposed allosteric regulation strategy, and the reconfiguration capability of the aptamers upon binding with targets was proven, providing the binary split aptasensor with superior sensitivity and selectivity. This sensing method has a wide dynamic detection range of 5 nmol·L^-1 to 500 μmol·L^-1, with a low limit of detection (LOD) of 4.17 nmol·L^-1, and achieves the ultra-sensitive and super-rapid detection of MG. This newly proposed aptasensor is equipped with the advantages of being label-free, time saving and economical. More importantly, this successful construction of a fused aptasensor expands the principles of split aptasensor design and provides a universal platform for the detection of environmental contaminants.

Preparation of an Immunoaffinity Column Based on Bispecific Monoclonal Antibody for Aflatoxin B1 and Ochratoxin A Detection Combined with ic-ELISA

A novel and efficient immunoaffinity column (IAC) based on bispecific monoclonal antibody (BsMAb) recognizing aflatoxin B₁ (AFB₁) and ochratoxin A (OTA) was prepared and applied in simultaneous extraction of AFB₁ and OTA from food samples and detection of AFB₁/OTA combined with ic-ELISA (indirect competitive ELISA). Two deficient cell lines, hypoxanthine guanine phosphoribosyl-transferase (HGPRT) deficient anti-AFB₁ hybridoma cell line and thymidine kinase (TK) deficient anti-OTA hybridoma cell line, were fused to generate a hybrid-hybridoma producing BsMAb against AFB₁ and OTA. The subtype of the BsMAb was IgG₁ via mouse antibody isotyping kit test. The purity and molecular weight of BsMAb were confirmed by SDS-PAGE method. The cross-reaction rate with AFB₂ was 37%, with AFG₁ 15%, with AFM₁ 48%, with AFM₂ 10%, and with OTB 36%. Negligible cross-reaction was observed with other tested compounds. The affinity constant (Ka) was determined by ELISA. The Ka (AFB₁) and Ka (OTA) was 2.43 × 10⁸ L/mol and 1.57 × 10⁸ L/mol, respectively. Then the anti-AFB₁/OTA BsMAb was coupled with CNBr-Sepharose, and an AFB₁/OTA IAC was prepared. The coupling time and elution conditions of IAC were optimized. The coupling time was 1 h with 90% coupling rate, the eluent was methanol–water (60:40, v:v, pH 2.3) containing 1 mol/L NaCl, and the eluent volume was 4 mL. The column capacities of AFB₁ and OTA were 165.0 ng and 171.3 ng, respectively. After seven times of repeated use, the preservation rates of column capacity for AFB₁ and OTA were 69.3% and 68.0%, respectively. The ic-ELISA for AFB₁ and OTA were applied combined with IAC. The IC₅₀ (50% inhibiting concentration) of AFB₁ was 0.027 ng/mL, the limit of detection (LOD) was 0.004 ng/mL (0.032 µg/kg), and the linear range was 0.006 ng/mL~0.119 ng/mL. The IC₅₀ of OTA was 0.878 ng/mL, the LOD was 0.126 ng/mL (1.008 µg/kg), and the linear range was 0.259 ng/mL~6.178 ng/mL. Under optimum conditions, corn and wheat samples were pretreated with AFB₁-OTA IAC. The recovery rates of AFB₁ and OTA were 95.4%~105.0% with ic-ELISA, and the correlations between the detection results and LC-MS were above 0.9. The developed IAC combined with ic-ELISA is reliable and could be applied to the detection of AFB₁ and OTA in grains.

Gold-based immunochromatographic assay strip for the detection of quinclorac in foods

In this study, a highly specific and sensitive monoclonal antibody (mAb) against quinclorac (Qui) was prepared. Based on the selected mAb, 2G3, an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) and an immunochromatographic strip assay were established for the detection of Qui in actual samples. The 50%-inhibitory concentration of mAb 2G3 against Qui was 48.763 ng mL^-1. No cross-reaction with other quinolines indicated that mAb 2G3 had high specificity. The recovery of the established ic-ELISA method was in the range of 85.6% to 98.9%. The cut-off value of Qui in cucumber and tomato by immunochromatographic strip was 200 ng g^-1. The analysis results of ic-ELISA and immunochromatographic strip assay were consistent with the results of LC-MS/MS, which further proved that the established ic-ELISA and immunochromatographic strip assay could provide valuable tools for the rapid detection of Qui residues in cucumber and tomato samples.

Enhanced Non-Toxic Immunodetection of Alternaria Mycotoxin Tenuazonic Acid Based on Ferritin-Displayed Anti-Idiotypic Nanobody-Nanoluciferase Multimers

The non-toxic immunoassay for mycotoxins is being paid more attention due to its advantages of higher safety and cost savings by using anti-idiotype antibodies to substitute toxins. In this study, with tenuazonic acid (TeA), a kind of highly toxic Alternaria mycotoxin as the target, an enhanced non-toxic immunoassay was developed based on the ferritin-displayed anti-idiotypic nanobody-nanoluciferase multimers. First, three specific β-type anti-idiotype nanobodies (AId-Nbs) bearing the internal image of TeA mycotoxin were selected from an immune phage display library. Then, the AId-Nb 2D with the best performance was exploited to generate a nanoluciferase (Nluc)-functionalized fusion monomer, by which a one-step non-toxic immunodetection format for TeA was established and proven to be effective. To further improve the affinity of the monomer, a ferritin display strategy was used to prepare 2D-Nluc fusion multimers. Finally, an enhanced bioluminescent enzyme immunoassay (BLEIA) was established in which the half maximal inhibitory concentration (IC₅₀) for TeA was 6.5 ng/mL with a 10.5-fold improvement of the 2D-based enzyme-linked immunosorbent assay (ELISA). The proposed assay exhibited high selectivities and good recoveries of 80.0-95.2%. The generated AId-Nb and ferritin-displayed AId-Nb-Nluc multimers were successfully extended to the application of TeA in food samples. This study brings a new strategy for production of multivalent AId-Nbs and non-toxic immunoassays for trace toxic contaminants.

Cu-BTC frameworks based electrochemical sensor for hazardous malachite green in aquaculture

Malachite green (MG) has been widely used for controlling external fungi and parasites in the aquaculture. However, MG has been proven to be very hazardous, and the detection of MG in aquaculture environment is crucial for determining whether MG has been used within the allowed limit and for protecting the environment. Herein, a kind of copper based metal-organic frameworks (MOFs) was prepared using copper nitrate and 1,3,5-benzenetricarboxylic acid (H₃BTC) as raw materials. The prepared Cu-BTC materials provide larger active area and higher accumulation capacity for MG, and meanwhile lower the charge-transfer resistance. As a result, the oxidation signal and detection sensitivity of MG are significantly improved by Cu-BTC frameworks. The linear range is 2-500 nM, and the detection limit is 0.67 nM, which is much lower than the reported values. Moreover, other usually-used aquaculture drugs have no interferences, including erythromycin, chloramphenicol, oxytetracycline, furazolidone and nitrofurazone. This method was applied in the water samples, and the results were consistent with those using high-performance liquid chromatography.

Residue and dissipation kinetics of toosendanin in cabbage, tobacco and soil using IC-ELISA detection

Toosendanin (TSN), as an important Chinese traditional insecticide, has been registered and commercialized in China. In this report, the residual analytical methods, residue dynamics and final residues of TSN in tobacco, cabbage and soil under field condition were studied by IC-ELISA and HPLC. The sensitivity, precision and repeatability of IC-ELISA method were more suitable in comparison with HPLC for the demand of TSN residue analysis. Using IC-ELISA, the half-lives (t1/2) of TSN were found to be 1.30 days in cabbage, 1.70 days in tabacco and 0.71 days in soil, respectively. At the recommended dose, the final residues of TSN detection by IC-ELISA was 0.009 mg·kg-1 in cabbage and 0.043 mg·kg-1 in tobacco, as well as was not detected in soil. Therefore, TSN is easily degradable, and IC-ELISA could be a convenient and supplemental analytical tool for monitoring TSN residue in crops and environment.

Ultrasensitive and simultaneous detection of 6 nonsteroidal anti-inflammatory drugs by colloidal gold strip sensor

In this work, an oxicam group-selective monoclonal antibody against 6 nonsteroidal anti-inflammatory drugs (NSAID; meloxicam, lornoxicam, piroxicam, sudoxicam, droxicam, and tenoxicam) was prepared. Also, a spacer arm with carboxyl group was derived at the hydroxyl of meloxicam to generate the meloxicam hapten. The half-maximal inhibitory concentrations (IC₅₀) were, respectively, 0.31 ng/mL for meloxicam, 0.49 ng/mL for lornoxicam, 2.90 ng/mL for piroxicam, 1.95 ng/mL for sudoxicam, 3.08 ng/mL for droxicam, and 5.36 ng/mL for tenoxicam. A colloidal gold immunochromatographic strip based on the monoclonal antibody was developed for the detection of these 6 NSAID in milk. The results could be obtained by the naked eye in 10 min, and the cut-off values and the visual limits of detection in real samples were 5, 5, 10, 10, 25, and 25 ng/mL, and 0.25, 1, 0.5, 0.5, 1, and 1 ng/mL, respectively. This immunochromatopgraphic strip is a suitable tool for on-site detection and screening of oxicam NSAID in milk samples.

Development of enzyme linked immunosorbent assay and lateral flow immunoassay for the rapid detection of dapsone in milk

High-throughput rapid detection of dapsone in milk without pretreatment.

Detection of Malachite Green in Water Using Edge Excited Label Free Fluorescent Probe NCQDs

The fluorescent properties of nitrogen doped carbon quantum dots (NCQDs) prepared through microwave assisted green method has been used as label free fluorescent probe for selective and sensitive detection of malachite green (MG) in water. The optical responses revealed that the NCQDs are highly stable and have good fluorescent quantum yield. The NCQDs were used to detect the Malchite Green in Mili Q water. Reduction in the fluorescence response was monitored in the range 17.12-128.43 μM of MG dissolved in Mili Q water. Linear response was observed in the range, 10-80 μM. The calculated value of limit of detection is 5.16 μM and the sensitivity is (0.03536 ± 0.00001) μM^-1. The future application of this work is that it can be employed to detect MG in the tap water and other natural sources of water.

Rapid Multi-Residue Detection Methods for Pesticides and Veterinary Drugs

The excessive use or abuse of pesticides and veterinary drugs leads to residues in food, which can threaten human health. Therefore, there is an extremely urgent need for multi-analyte analysis techniques for the detection of pesticide and veterinary drug residues, which can be applied as screening techniques for food safety monitoring and detection. Recent developments related to rapid multi-residue detection methods for pesticide and veterinary drug residues are reviewed herein. Methods based on different recognition elements or the inherent characteristics of pesticides and veterinary drugs are described in detail. The preparation and application of three broadly specific recognition elements-antibodies, aptamers, and molecular imprinted polymers-are summarized. Furthermore, enzymatic inhibition-based sensors, near-infrared spectroscopy, and SERS spectroscopy based on the inherent characteristics are also discussed. The aim of this review is to provide a useful reference for the further development of rapid multi-analyte analysis of pesticide and veterinary drug residues.

Development of qualitative and quantitative immunochromatographic strip test assay for rapid and simple detection of leucomalachite green residual in aquatic animals

A rapid and simple immunochromatographic strip test assay based on competitive format was developed for leucomalachite green (LMG) detection. LMG-bovine serum albumin and rabbit anti-sheep IgG were immobilized on nitrocellulose membrane for the test line and control line, respectively. Anti-LMG-colloidal gold conjugate was immobilized onto the conjugate pad. For qualitative detection, the cut-off limit of the strip test was determined at 2 µg/L by the naked eye. For quantitative analysis, the working range of the LMG detection was 0.7-2 µg/L with LOD at 0.28 µg/L. A one-step immunochromatographic strip test for LMG detection can be completed within 5 min without any incubation, washing and blocking steps. Analysis results of LMG in aquatic animals obtained from the immunochromatographic strip test were in good agreement with those realized from enzyme-link immunosorbent assay. The developed the immunochromatographic strip test offered rapid detection as a simple (one-step), cost-effective, instrument-free assay and no need for handling reagents.

Fluorescence detection of malachite green in fish tissue using red emissive Se,N,Cl-doped carbon dots

Facile detection of malachite green (MG), a toxic dye, in aquaculture is urgently demanded for environment and food safety. Herein, we design a novel fluorescent probe, namely red emissive Se,N,Cl-doped carbon dots (CDs), to accurately determinate MG. CDs are prepared by hydrothermal treatment of selenourea and o-phenylenediamine in HCl solution. This material exhibits excitation-independent dual emissions at 625 and 679 nm, with a high quantum yield of 23.6%. A selective and sensitive fluorescent sensor toward MG is established based on inner filter effect, because both the excitation and emission light of CDs can be strongly absorbed by MG. The fluorescence quenching of CDs is linear to the MG concentration over the range of 0.07-2.50 μM with a low detection limit of 21 nM. Trace-level analysis of MG in fish tissue is successfully explored, demonstrating the great potential of the proposed sensor for MG monitoring in aquatic products.

Specific and Generic Immunorecognition of Glycopeptide Antibiotics Promoted by Unique and Multiple Orientations of Hapten

Conjugation chemistry does not always provide adequate spatial orientation of hapten in immunogens for the best presentation of generic or individual epitopes. In the present study, the influence of unique and multiple orientations of immunizing hapten on the immune response repertoire was compared to select generic recognition system. The glycopeptides, teicoplanin (TPL) and ristomycin (RSM), were conjugated to BSA to produce immunogens with unique and multiple orientations of haptens. Polyclonal antibodies generated against TPL conjugated through a single site were of uniform specificity and demonstrated selective TPL recognition, regardless of the coating conjugates design. The sensitivity (IC50) of 4 enzyme-linked immunosorbent assays (ELISAs) for TPL varied little within the 3.5-7.4 ng/mL, with a dynamic range of 0.2-100 ng/mL. RSM was coupled to BSA through several glycoside sites that evoked a wider repertoire of response. This first described anti-RSM antibody was selective for RSM in homologous hapten-coated ELISAs with IC50 values in the range 4.2-35 ng/mL. Among the heterologous antigens, periodate-oxidized TPL conjugated to gelatine was selected as the best binder of generic anti-RSM fraction. The developed ELISA showed group recognition of glycopeptides RSM, TPL, eremomycin, and vancomycin with cross-reactivity of 37-100% and a 10-10,000 ng/mL dynamic range. Thus, multiple presentations of immunizing hapten help expand the repertoire of immune responses and opportunities for the selection of the required fine-specificity agent.

Accurate SERS detection of malachite green in aquatic products on basis of graphene wrapped flexible sensor

Malachite Green (MG) is a banned pesticide for aquaculture products. As a required inspection item, its fast and accurate determination before the products' accessing market is very important. Surface enhanced Raman scattering (SERS) is a promising tool for MG sensing, but it requires the overcoming of several problems such as fairly poor sensitivity and reproducibility, especially laser induced chemical conversion and photo-bleaching during SERS observation. By using a graphene wrapped Ag array based flexible membrane sensor, a modified SERS strategy was proposed for the sensitive and accurate detection of MG. The graphene layer functioned as an inert protector for impeding chemical transferring of the bioproduct Leucomalachite Green (LMG) to MG during the SERS detection, and as a heat transmitter for preventing laser induced photo-bleaching, which enables the separate detection of MG and LMG in fish extracts. The combination of the Ag array and the graphene cover also produced plentiful densely and uniformly distributed hot spots, leading to analytical enhancement factor up to 3.9 × 10⁸ and excellent reproducibility (relative standard deviation low to 5.8% for 70 runs). The proposed method was easily used for MG detection with limit of detection (LOD) as low as 2.7 × 10^-11 mol L^-1. The flexibility of the sensor enable it have a merit for in-field fast detection of MG residues on the scale of a living fish through a surface extraction and paste transferring manner. The developed strategy was successfully applied in the analysis of real samples, showing good prospects for both the fast inspection and quantitative detection of MG.