Probing and Quantifying the Food-Borne Pathogens and Toxins: From In Vitro to In Vivo

CRISPR/Cas System: The Accelerator for the Development of Non-nucleic Acid Target Detection in Food Safety

Non-nucleic acid targets have posed a serious challenge to food safety. The detection of non-nucleic acid targets can enable us to monitor food contamination in a timely manner. In recent years, the CRISPR/Cas system has been extensively explored in biosensing. However, there is a lack of a summary of CRISPR/Cas-powered detection tailored to non-nucleic acid targets involved in food safety. This review comprehensively summarizes the recent advances on the construction of CRISPR/Cas-powered detection and the promising applications in the field of food safety related non-nucleic acid targets. The current challenges and futuristic perspectives are also proposed accordingly. The rapidly evolving CRISPR/Cas system has provided a powerful propellant for non-nucleic acid target detection via integration with aptamer and/or DNAzyme. Compared with traditional analytical methods, CRISPR/Cas-powered detection is conceptually novel, essentially eliminates the dependence on large instruments, and also demonstrates the capability for rapid, accurate, sensitive, and on-site testing.

Advanced dendritic glucan-derived biomaterials: From molecular structure to versatile applications

There is considerable interest in the development of advanced biomaterials with improved or novel functionality for diversified applications. Dendritic glucans, such as phytoglycogen and glycogen, are abundant biomaterials with highly branched three-dimensional globular architectures, which endow them with unique structural and functional attributes, including small size, large specific surface area, high water solubility, low viscosity, high water retention, and the availability of numerous modifiable surface groups. Dendritic glucans can be synthesized by in vivo biocatalysis reactions using glucosyl-1-phosphate as a substrate, which can be obtained from plant, animal, or microbial sources. They can also be synthesized by in vitro methods using sucrose or starch as a substrate, which may be more suitable for large-scale industrial production. The large numbers of hydroxyl groups on the surfaces of dendritic glucan provide a platform for diverse derivatizations, including nonreducing end, hydroxyl functionalization, molecular degradation, and conjugation modifications. Due to their unique physicochemical and functional attributes, dendritic glucans have been widely applied in the food, pharmaceutical, biomedical, cosmetic, and chemical industries. For instance, they have been used as delivery systems, adsorbents, tissue engineering scaffolds, biosensors, and bioelectronic components. This article reviews progress in the design, synthesis, and application of dendritic glucans over the past several decades.

One-Pot Synthesis of Enzyme and Antibody/CaHPO4 Nanoflowers for Magnetic Chemiluminescence Immunoassay of Salmonella enteritidis

In this study, through a bioinspired strategy, the horseradish peroxidase (HRP) and antibody (Ab) were co-embedded into CaHPO₄ to prepare HRP-Ab-CaHPO₄ (HAC) bifunctional hybrid nanoflowers by one-pot mild coprecipitation. The as-prepared HAC hybrid nanoflowers then were utilized as the signal tag in a magnetic chemiluminescence immunoassay for application in the detection of Salmonella enteritidis (S. enteritidis). The proposed method exhibited excellent detection performance in the linear range of 10-10⁵ CFU/mL, with the limit of detection (LOD) of 10 CFU/mL. This study indicates great potential in the sensitive detection of foodborne pathogenic bacteria in milk with this new magnetic chemiluminescence biosensing platform.

Effect-Directed Synthesis of PhoP/PhoQ Inhibitors to Regulate Salmonella Virulence

Salmonella spp. are among the leading bacterial causes of foodborne infections. The PhoP/PhoQ two-component regulatory system serves as a master virulence regulator in Salmonella. Although PhoP/PhoQ represents an ideal target for disarming Salmonella virulence, it has very few inhibitors reported so far. We describe a novel platform by which an inhibitor was selected out of around 185 compounds directly from reaction media containing thiosemicarbazones and mono-, di-, and trihydrazones. To achieve this, tandem library preparation, thin-layer chromatography (TLC) bioautography, and effect-directed deconvolution were applied. We illustrate the potential of this effect-directed synthesis for the identification of new useful bioactive compounds for the food field.

Fluorescent-based nanosensors for selective detection of a wide range of biological macromolecules: A comprehensive review

Thanks to their unique attributes, such as good sensitivity, selectivity, high surface-to-volume ratio, and versatile optical and electronic properties, fluorescent-based bioprobes have been used to create highly sensitive nanobiosensors to detect various biological and chemical agents. These sensors are superior to other analytical instrumentation techniques like gas chromatography, high-performance liquid chromatography, and capillary electrophoresis for being biodegradable, eco-friendly, and more economical, operational, and cost-effective. Moreover, several reports have also highlighted their application in the early detection of biomarkers associated with drug-induced organ damage such as liver, kidney, or lungs. In the present work, we comprehensively overviewed the electrochemical sensors that employ nanomaterials (nanoparticles/colloids or quantum dots, carbon dots, or nanoscaled metal-organic frameworks, etc.) to detect a variety of biological macromolecules based on fluorescent emission spectra. In addition, the most important mechanisms and methods to sense amino acids, protein, peptides, enzymes, carbohydrates, neurotransmitters, nucleic acids, vitamins, ions, metals, and electrolytes, blood gases, drugs (i.e., anti-inflammatory agents and antibiotics), toxins, alkaloids, antioxidants, cancer biomarkers, urinary metabolites (i.e., urea, uric acid, and creatinine), and pathogenic microorganisms were outlined and compared in terms of their selectivity and sensitivity. Altogether, the small dimensions and capability of these nanosensors for sensitive, label-free, real-time sensing of chemical, biological, and pharmaceutical agents could be used in array-based screening and in-vitro or in-vivo diagnostics. Although fluorescent nanoprobes are widely applied in determining biological macromolecules, unfortunately, they present many challenges and limitations. Efforts must be made to minimize such limitations in utilizing such nanobiosensors with an emphasis on their commercial developments. We believe that the current review can foster the wider incorporation of nanomedicine and will be of particular interest to researchers working on fluorescence technology, material chemistry, coordination polymers, and related research areas.

Isothermal RNA Amplification for the Detection of Viable Pathogenic Bacteria to Estimate the Salmonella Virulence for Causing Enteritis

Viable foodborne pathogens can cause intestinal infection and food poisoning. Herein, we reported an RNA assay allowing for sensitive (close to 1 CFU and 1% viable bacteria detectable) and rapid (within 2.5 h) detection of viable pathogenic bacteria by coupling isothermal RNA amplification (nucleic acid sequence-based amplification, NASBA) with a CRISPR/Cas13a system. NASBA allowed direct amplification of 16S rRNA extracted from viable S. enterica (RNAs degrade rapidly in dead bacteria), and the specificity of amplification was ensured using Cas13a/crRNA to recognize the amplicons. We used the CRISPR/Cas13-based NASBA assay (termed cNASBA assay) to investigate the in vivo colonization and intestinal infection of S. enterica in mice. We found that S. enterica was mainly colonized at the cecum, colon, and rectum, and the severity of enteritis caused by S. enterica was determined by the number of viable S. enterica rather than the total count of S. enterica. The cNASBA assay can quantify viable S. enterica and thus can improve the accuracy of virulence estimation compared to qPCR. It shows promise as a reliable tool for monitoring pathogen contamination and biosafety control.

Upconversion luminescent nanomaterials: A promising new platform for food safety analysis

Foodborne diseases have become a significant threat to public health worldwide. Development of analytical techniques that enable fast and accurate detection of foodborne pathogens is significant for food science and safety research. Assays based on lanthanide (Ln) ion-doped upconversion nanoparticles (UCNPs) show up as a cutting edge platform in biomedical fields because of the superior physicochemical features of UCNPs, including negligible autofluorescence, large signal-to-noise ratio, minimum photodamage to biological samples, high penetration depth, and attractive optical and chemical features. In recent decades, this novel and promising technology has been gradually introduced to food safety research. Herein, we have reviewed the recent progress of Ln³⁺-doped UCNPs in food safety research with emphasis on the following aspects: 1) the upconversion mechanism and detection principles; 2) the history of UCNPs development in analytical chemistry; 3) the in-depth state-of-the-art synthesis strategies, including synthesis protocols for UCNPs, luminescence, structure, morphology, and surface engineering; 4) applications of UCNPs in foodborne pathogens detection, including mycotoxins, heavy metal ions, pesticide residue, antibiotics, estrogen residue, and pathogenic bacteria; and 5) the challenging and future perspectives of using UCNPs in food safety research. Considering the diversity and complexity of the foodborne harmful substances, developing novel detections and quantification techniques and the rigorous investigations about the effect of the harmful substances on human health should be accelerated.

Inhibition of Staphylococcus aureus LC554891 by Moringa oleifera Seed Extract either Singly or in Combination with Antibiotics

Bacterial outbreaks caused by Staphylococcus aureus (S. aureus) are interesting due to the existence of multidrug resistant (MDR) isolates. Therefore, there is a need to develop novel ways to control such MDR S. aureus. In this study, some natural agents such as honey bee (HB), extracts of either Moringa oleifera seeds (MSE), or leaves (MLE) and essential oils of garlic, clove, and moringa were studied for their inhibitory activity against this S. aureus pathogen. About 100 food samples including beef luncheon (n = 25), potato chips (n = 50), and corn flakes (n = 25) were investigated for possible pollution with the S. aureus bacteria. The isolated bacteria suspected to belong S. aureus that grew well onto Baird-Parker agar (Oxoid) and shiny halo zones and positive coagulase reaction were selected and identified by API-Kits; all of them that were approved belong to S. aureus (18 strains). The sensitivity of the obtained 18 S. aureus bacterial strains to 12 antibiotics were evaluated; all of them were resistant to ofloxacin; however, other antibiotics tested showed variable results. Interestingly, the S. aureus No. B3 isolated from beef luncheon was resistant to10 antibiotics out of 12 ones tested. Multiple antibiotic resistance index (MAR) of this S. aureus strain was about 83.3%. Therefore, its identification was confirmed by sequencing of a 16S rRNA gene which approved a successful biochemical identification carried out by API Kits and such strain was designated S. aureus LC 554891. The genome of such strain appeared to contain mecA gene encoding methicillin resistance; it was found to contain hla, hlb, tsst-1, and finbA that encode α-blood hemolysis, β-blood hemolysis, toxic shock syndrome gene, and fibrinogen-binding protein gene, respectively. In addition, the virulence factors viz. sea; seb; sec encoding enterotoxins were detected in the DNA extracted from S. aureus B3 strain. Aqueous extract of Moringa oleifera seeds (MSE) showed inhibitory activity against S. aureus LC 554891 better than that obtained by tetracycline, essential oils or HB. Minimum inhibitory concentration (MIC) of MSE was 20µg/mL. Instrumental analysis of MSE showed 14 bioactive chemical compounds. Combinations of both MSE and tetracycline showed distinctive inhibitory activity against S. aureus LC 554891 than that obtained by either tetracycline or MSE singly.

Directly profiling intact Staphylococcus aureus in water and foods via enzymatic cleavage aptasensor

Staphylococcus aureus (S. aureus) causes serious food-borne diseases, and tools able to directly profile intact S. aureus would greatly facilitate food safety and public health. Herein, we proposed a biosensing platform for culture-independent and separation-free profiling S. aureus, thus allow us to directly detect intact S. aureus in complex samples. The binding protection effect of aptamer-cell complex was introduced to construct the aptasensor, and it allowed to eliminate the optimization of aptamer probe sequences. The proposed aptasensor, terms enzymatic cleavage aptasensor could achieve a sensitive (a detection limit of 64 CFU/mL) and broad-concentration quantification (dynamic range 10²-10⁷ CFU/mL) of S. aureus. Furthermore, it could specifically identify intact S. aureus in complex samples, and the quantifying of S. aureus was achieved in tap water, milk and porker with high precision. Therefore, enzymatic cleavage aptasensor could be a good candidate for on-site biosensing platform of S. aureus, as well as other pathogens by replacing the aptamer sequences.

A Novel Electrochemical Nanosensor for the Simultaneous Sensing of Two Toxic Food Dyes

This work reports for the first time the preparation and performance of a nanosensor for the simultaneous detection of metanil yellow and fast green, which are toxic food dyes. For the development of this sensitive platform, the surface of a glassy carbon electrode (GCE) was modified with calixarene and gold nanoparticles. The sensing ability of the designed nanosensor (calix8/Au NPs/GCE) was tested by cyclic voltammetry, differential pulse voltammetry, and electrochemical impedance spectroscopy. The influence of a number of parameters was investigated for optimizing the conditions to achieve the best response of the target analytes. Due to the synergistic activity of calix[8]arene and Au nanoparticles, the calix8/Au NPs/GCE nanocomposite was found to significantly enhance the signals of the selected food dyes in comparison to bare GCE. Under optimized conditions, limits of detection for metanil yellow and fast green were found to be 9.8 and 19.7 nM, respectively, at the calix8/Au NPs/GCE. The designed sensing platform also demonstrated figures of merit when applied for the sensing of food dyes in real water and juice samples. Moreover, high percent recovery, reproducibility, and stability suggested applicability of the designed electrochemical platform for real sample analysis.

A novel universal nano-luciferase-involved reporter system for long-term probing food-borne probiotics and pathogenic bacteria in mice by in situ bioluminescence imaging

Food-borne bacteria have received increasing attention due to their great impact on human health. Bioimaging makes it possible to monitor bacteria inside the living body in real time and in situ. Nano-luciferase (NLuc) as a new member of the luciferase family exhibits superior properties than the commonly used luciferases, including small size, high stability and improved luminescence. Herein, NLuc, CBRLuc and FLuc were well expressed in varied food-borne bacteria. Results showed that the signal intensity of E. coli-NLuc was about 41 times higher than E. coli-CBRLuc, L. plantarum-NLuc was nearly 227 times that of L. plantarum-FLuc in vitro. Moreover, NLuc was applied to trace L. plantarum and E. coli in vivo through the whole body and separated digestive tract imaging, as well as the feces bacterium counting and probing. The persistence of bioluminescent strains was predominantly localized in colon and cecum of mice after oral administration. The NLuc system showed its incomparable superiority, especially in the application of intestinal imaging and the universality for food-borne bacteria. We demonstrated that the NLuc system was a brilliant alternative for specific application of food-borne bacteria in vivo, aiming to collect more accurate and real-time information of food-borne bacteria from the living body for further investigation of their damage mechanism and nutrition effect.

Schematic illustration of the preparation of bioluminescent bacteria and the experimental design of tracing of the foodborne bacteria in vivo.

A Rapid and Nondestructive Method for Simultaneous Determination of Aflatoxigenic Fungus and Aflatoxin Contamination on Corn Kernels

Conventional methods for detecting aflatoxigenic fungus and aflatoxin contamination are generally time-consuming, sample-destructive, and require skilled personnel to perform, making them impossible for large-scale nondestructive screening detection, real-time, and on-site analysis. Therefore, the potential of visible-near-infrared (Vis-NIR) spectroscopy over the 400-2500 nm spectral range was examined for determination of aflatoxigenic fungus infection and the corresponding aflatoxin contamination on corn kernels in a rapid and nondestructive manner. The two A. flavus strains, AF13 and AF38, were used to represent the aflatoxigenic fungus and nonaflatoxigenic fungus, respectively, for artificial inoculation on corn kernels. The partial least-squares discriminant analysis (PLS-DA) models based on different combinations of spectral range (I: 410-1070 nm; II: 1120-2470 nm), corn side (endosperm or germ side), spectral variable number (full spectra or selected variables), modeling approach (two-step or one-step), and classification threshold (20 or 100 ppb) were developed and their performances were compared. The first study focusing on detection of aflatoxigenic fungus-infected corn kernels showed that, in classifying the "control+AF38-inoculated" and AF13-inoculated corn kernels, the full spectral PLS-DA models using the preprocessed spectra over range II and one-step approach yielded more accurate prediction results than using the spectra over range I and the two-step approach. The advantage of the full spectral PLS-DA models established using one corn side than the other side were not consistent in the explored combination cases. The best full spectral PLS-DA model obtained was obtained using the germ-side spectra over range II with the one-step approach, which achieved an overall accuracy of 91.11%. The established CARS-PLSDA models performed better than the corresponding full-spectral PLS-DA models, with the better model achieved an overall accuracy of 97.78% in separating the AF13-inoculated corn kernels and the uninfected control and AF38-inoculated corn kernels. The second study focusing on the detection of aflatoxin-contaminated corn kernels showed that, based on the aflatoxin threshold of 20 and 100 ppb, the best overall accuracy in classifying the aflatoxin-contaminated and healthy corn kernels attained 86.67% and 84.44%, respectively, using the CARS-PLSDA models. The quantitative modeling results using partial least-squares regression (PLSR) obtained the correlation coefficient of prediction set ( R_P) of 0.91, which indicated the possibility of using Vis-NIR spectroscopy to quantify aflatoxin concentration in aflatoxigenic fungus-infected corn kernels.

Visualized Detection of Vibrio parahaemolyticus in Food Samples Using Dual-Functional Aptamers and Cut-Assisted Rolling Circle Amplification

A biosensor using two aptamers (Dual-Apt) and cut-assisted rolling circle amplification (CA-RCA) for rapid and visualized detection of Vibrio parahaemolyticus was established. The anchoring aptamer (A-Apt) that specifically binds to the surface of V. parahaemolyticus was applied to separate and enrich the bacterium from the food matrix with the help of streptavidin magnetic beads. While the detecting aptamer (D-Apt), binding on the different sites of the cell surface, was used as a signal reporter. CA-RCA with an enhanced amplification rate was fabricated here to amplify the D-Apt to produce the monomeric G4 sequence that catalyzes the oxidation of ABTS^2-, resulting in the coloration visible to the naked eye. Under optimal conditions, as low as 10 colony-forming units (CFU)/mL (g) of V. parahaemolyticus can be visibly detected in real food samples. Free from DNA extraction, visualized signal output and no need for expensive instruments enable Dual-Apt and CA-RCA to be a promising strategy for on-spot rapid detection.

In-Taken Labeling and in Vivo Tracing Foodborne Probiotics via DNA-Encapsulated Persistent Luminescence Nanoprobe Assisted Autofluorescence-Free Bioimaging

An in vivo probing strategy that can real-time and in situ trace target probiotics inside the living body is herein proposed by employing plasmid-like DNA as in-taken assistance, persistent luminescence nanophosphors (PLNPs) as optical labeling, and background-free fluorescence bioimaging as signal readout. PLNPs with superlong afterglow and excellent biocompatibility and stability were surface-modified by DNA molecules with a specific sequence, which greatly promoted the nanoparticle penetration into the bacteria and facilitated the in vivo bioimaging with high sensitivity and signal-to-noise ratio. Compared with the previous surface-labeling strategy by antibody recognition, the in-taken optical labeling demonstrated improved stability, and reached ideal results of real-time and in situ monitoring the in vivo behaviors of target probiotics, supporting the further development of in vivo investigation methodology for foodborne probiotics. Moreover, such a strategy offers a promising platform that leverage nanoscience to food nutrition as well as food-safety research, aiming to collect more accurate and fresh information from the living body.

Construction of molecularly imprinted nanoplatforms with persistent luminescence for the in vitro specific adsorption and in vivo targeted regulation of food-borne biotoxins

Molecularly imprinted nanoplatforms with super-long afterglow persistent luminescence showed in vitro specific adsorption and in vivo targeted regulation ability of food-borne biotoxins by autofluorescence-free nanoimaging.

Dual-Terminal Stemmed Aptamer Beacon for Label-Free Detection of Aflatoxin B1 in Broad Bean Paste and Peanut Oil via Aggregation-Induced Emission

Aflatoxin B₁ (AFB₁) contamination ranks as one of the most critical food safety issues, and assays for its on-site monitoring are highly demanded. Herein, we propose a label-free, one-tube, homogeneous, and cheap AFB₁ assay based on a finely tunable dual-terminal stemmed aptamer beacon (DS aptamer beacon) and aggregation-induced emission (AIE) effects. The DS aptamer beacon structure could provide terminal protection of the aptamer probe against exonuclease I and confer specific and quick response to target AFB₁. In comparison to the conventional molecule beacon structure, the stability of the DS aptamer beacon could be finely tuned by adjusting its two terminal stems, allowing for elaborately optimizing probe affinity and selectivity. By the utilization of an AIE-active fluorophore, which would be lighted up by aggregating to negatively charged DNA, AFB₁ could be determined in a label-free manner. The proposed method could quantify AFB₁ in one test tube using two unlabeled DNA strands. It has been successfully applied for analyzing AFB₁ in peanut oil and broad bean sauce, with total recoveries ranging from 92.75 to 118.70%. Thus, the DS aptamer beacon-based assay could potentially facilitate real-time monitoring and controlling of AFB₁ pollution.