Programming a Biofilm-Mediated Multienzyme-Assembly-Cascade System for the Biocatalytic Production of Glucosamine from Chitin

Engineering high-activity crosslinked enzyme aggregates via SpyCatcher/SpyTag-mediated self-assembly

Crosslinked Enzyme Aggregates (CLEAs) are favored for their operational stability and recyclability. However, the traditional CLEAs preparation may distort the enzyme's active site and reduce activity. Therefore, we developed a universally applicable crosslinked SpyCatcher scaffold system designed for the facile preparation of CLEAs. Four lysine residues were introduced to the N-terminus of SpyCatcher to enhance the crosslinking selectivity with glutaraldehyde. This scaffold subsequently enables the assembly of enzymes through the specific binding affinity between SpyTag and SpyCatcher. By precipitating SpyCatcher with (NH4)2SO4 at a 1:2 (v/v) ratio at 4 °C for 1 h, followed by crosslinking with glutaraldehyde at 25 °C and 100 rpm for 3 h, the SpyCatcher scaffold achieved a crosslinking efficiency exceeding 90 %. Utilizing this approach for the immobilization of SpyTaged enzymes to construct xylanase-CLEAs (X-CLEAs) and cellulase-CLEAs (C-CLEAs) highlighted the accurate construction the enzyme complex. Furthermore, C-CLEAs retained approximately 90 % activity after 3 cycles and over 50 % activity after 10 cycles, demonstrating good operational stability and reusability. C-CLEAs achieved a 1.6-fold more reducing sugars in corn stover hydrolysis compared to free enzymes. This suggests that the close proximity within CLEAs provided an advantage for the enzymatic cascade reaction, highlighting the potential application of CLEAs in various fields.

Catalytic Synthesis of (S)-CHBE by Directional Coupling and Immobilization of Carbonyl Reductase and Glucose Dehydrogenase

Ethyl (S)-4-chloro-3-hydroxybutyrate ((S)-CHBE) is an important chiral intermediate in the synthesis of the cholesterol-lowering drug atorvastatin. Studying the use of SpyTag/SpyCatcher and SnoopTag/SnoopCatcher systems for the asymmetric reduction reaction and directed coupling coenzyme regeneration is practical for efficiently synthesizing (S)-CHBE. In this study, Spy and Snoop systems were used to construct a double-enzyme directed fixation system of carbonyl reductase (BsCR) and glucose dehydrogenase (BsGDH) for converting 4-chloroacetoacetate (COBE) to (S)-CHBE and achieving coenzyme regeneration. We discussed the enzymatic properties of the immobilized enzyme and the optimal catalytic conditions and reusability of the double-enzyme immobilization system. Compared to the free enzyme, the immobilized enzyme showed an improved optimal pH and temperature, maintaining higher relative activity across a wider range. The double-enzyme immobilization system was applied to catalyze the asymmetric reduction reaction of COBE, and the yield of (S)-CHBE reached 60.1% at 30 °C and pH 8.0. In addition, the double-enzyme immobilization system possessed better operational stability than the free enzyme, and maintained about 50% of the initial yield after six cycles. In summary, we show a simple and effective strategy for self-assembling SpyCatcher/SnoopCatcher and SpyTag/SnoopTag fusion proteins, which inspires building more cascade systems at the interface. It provides a new method for facilitating the rapid construction of in vitro immobilized multi-enzyme complexes from crude cell lysate.

Enhancing Poly-γ-glutamic Acid Production in Bacillus tequilensis BL01 through a Multienzyme Assembly Strategy and Expression Features of Glutamate Synthesis from Corynebacterium glutamicum

The enhancement of intracellular glutamate synthesis in glutamate-independent poly-γ-glutamic acid (γ-PGA)-producing strains is an essential strategy for improving γ-PGA production. Bacillus tequilensis BL01ΔpgdSΔggtΔsucAΔgudB:P43-ppc-pyk-gdhA for the efficient synthesis of γ-PGA was constructed through expression of glutamate synthesis features of Corynebacterium glutamicum, which increased the titer of γ-PGA by 2.18-fold (3.24 ± 0.22 g/L) compared to that of B. tequilensis BL01ΔpgdSΔggtΔsucAΔgudB (1.02 ± 0.11 g/L). To further improve the titer of γ-PGA and decrease the production of byproducts, three enzymes (Ppc, Pyk, and AceE) were assembled to a complex using SpyTag/Catcher pairs. The results showed that the γ-PGA titer of the assembled strain was 31.31% higher than that of the unassembled strain. To further reduce the production cost, 25.73 ± 0.69 g/L γ-PGA with a productivity of 0.48 g/L/h was obtained from cheap molasses. This work provides new metabolic engineering strategies to improve the production of γ-PGA in B. tequilensis BL01. Furthermore, the engineered strain has great potential for the industrial production of γ-PGA from molasses.

Affinity-assisted covalent self-assembly of PduQ-SpyTag and Nox-SpyCatcher to construct multi-enzyme complexes on the surface of magnetic microsphere modified with chelated Ni2

It is of great significance to study the effect of multi-enzyme aggregation behavior at the interface on the formation of multi-enzyme complexes and their co-catalytic characteristics, which is helpful for us to design and construct immobilized multi-enzyme complex systems for in vitro synthetic biology. Here, a magnetic microsphere with chelated Ni2+, was prepared to explore the self-assembly characteristics of PduQ-SpyTag (P-T) and Nox-SpyCatcher (NC) on its surface, based on the mixed interaction mode consisting the affinity of His-tag/Ni2+ and covalent binding of SpyTag/SpyCatcher. After studying the effect of saturated or unsaturated adsorption of P-T on the covalent binding between P-T and NC at the interface, a possible multienzyme interaction mechanism for the affinity-assisted covalent self-assembly on the Ni2+ chelating surface was proposed. The time evolution of NADH showed that the immobilized P-T/N-C complex formed by this method and the free P-T/N-C complex exhibited similar synergistic catalytic properties, and presented higher catalytic efficiency than the simple mixing of P-T and NC. The optimal catalytic conditions, stability and reusability of the immobilized multi-enzyme complexes prepared in this study were also discussed by comparing them with free enzymes. In this study, we demonstrate a simple and effective strategy for self-assembling SpyTag/SpyCatcher fusion proteins on the surface of magnetic beads, which is inspiring for the construction of more cascade enzyme systems at the interface. It provides a new method for facilitating the rapid construction of immobilized multi-enzyme complexes in vitro from the crude cell lysis.

Catcher/Tag Toolbox: Biomolecular Click-Reactions For Protein Engineering Beyond Genetics

Manipulating protein architectures beyond genetic control has attracted widespread attention. Catcher/Tag systems enable highly specific conjugation of proteins in vivo and in vitro via an isopeptide-bond. They provide efficient, robust, and irreversible strategies for protein conjugation and are simple yet powerful tools for a variety of applications in enzyme industry, vaccines, biomaterials, and cellular applications. Here we summarize recent development of the Catcher/Tag toolbox with a particular emphasis on the design of Catcher/Tag pairs targeted for specific applications. We cover the current limitations of the Catcher/Tag systems and discuss the pH sensitivity of the reactions. Finally, we conclude some of the future directions in the development of this versatile protein conjugation method and envision that improved control over inducing the ligation reaction will further broaden the range of applications.

Engineered Escherichia coli Consortia Function in a Programmable Pattern for Multiple Enzymatic Biosynthesis

Coordinating microbial consortia to realize complex synthetic pathways is an area of great interest in the rapidly growing field of biomanufacturing. This work presents a programmable method for assembling living cells based on the surface display of affinity groups, enabling whole-cell catalysis with optimized catalytic efficiency through the rational arrangement of cell assemblies and enzymes. In the context of d-phenyllactic acid (d-PLA) synthesis, four enzymes were rationally arranged considering substrate channeling and protein expression levels. The production efficiencies of d-PLA catalyzed by engineered microbial consortia were 1.31- and 2.55-fold higher than those of biofilm and whole-cell catalysts, respectively. Notably, substrate channeling was identified between the coimmobilized rate-limiting enzymes, resulting in a 3.67-fold improvement in catalytic efficiency compared with hybrid catalysts (free enzymes coupled with whole-cell catalysts). The highest yield of d-PLA catalyzed by microbial consortia was 102.85 ± 3.39 mM with 140 mM benzaldehyde as the substrate. This study proposes a novel approach to cell enzyme assembly for coordinating microbial consortia in multiple enzymatic biosynthesis processes.

The quorum sensing system of Novosphingobium sp. ERN07 regulates aggregate formation that promotes cyanobacterial growth

Microbial aggregates play key roles in cyanobacterial blooms. Being a bacterial communication mechanism, quorum sensing (QS) synchronizes gene expression in a density-dependent manner and regulates bacterial physiological behavior. However, the regulatory role of QS in the formation of cyanobacteria-associated bacterial aggregates remains poorly understood. Here, we present insight into the role of QS in regulating bacterial aggregate formation in a representative bacterial strain, Novosphingobium sp. ERN07, which was isolated from Microcystis blooms in Lake Taihu. A biosensor assay showed that ERN07 exhibits significant AHL-producing capacity. Biochemical and microscopic analysis revealed that this strain possesses the ability to form aggregated communities. Gene knockout experiments indicated that the AHL-mediated QS system positively regulates bacterial aggregation. The aggregated communities possess the ability to enhance the production of extracellular polymeric substances (EPS), alter EPS composition ratios, and affect biofilm formation. The addition of aggregated substances also has a significant growth-promoting effect on M. aeruginosa. Transcriptomic analysis revealed that the aggregated substances positively regulate photosynthetic efficiency and energy metabolism of M. aeruginosa. These findings show that QS can mediate the aggregation phenotype and associated substrate spectrum composition, contributing to a better understanding of microalgal-bacterial interactions and mechanisms of Microcystis bloom maintenance in the natural environment.

Co-Immobilizing Two Glycosidases Based on Cross-Linked Enzyme Aggregates to Enhance Enzymatic Properties for Achieving High Titer Icaritin Biosynthesis

Icaritin is a rare and high-value isopentane flavonoid compound with remarkable activities. Increasing yields while reducing cost has been a great challenge in icaritin production. Herein, we first reported a high titer icaritin biosynthesis strategy from epimedin C through co-immobilizing α-l-rhamnosidase (Rha1) and β-glucosidase (Glu4) using cross-linked enzyme aggregates (CLEAs). The created CLEAs exhibited excellent performances in terms of catalytic activity, thermal stability, pH stability, and reusability. Notably, Rha1-CLEAs (K_i: 1 M) and Glu4-CLEAs (K_i: 0.1 M) were more tolerant to sugars (glucose or rhamnose) than free enzymes (0.1 M for Rha1 and 0.007 M for Glu4) by immobilization, achieving the highest icaritin productivity under the highest substrate concentration ever reported. Finally, about 34.24 g/L icaritin could be obtained from 100 g/L epimedin C within 8 h, indicating the great potential for industrialization. This study also provides a promising strategy for the low-cost production of other high-value aglycone compounds by solving poor stability and sugar inhibition of glycosidase.

A Genetically Engineered Biofilm Material for SARS-CoV-2 Capturing and Isolation

The novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is continuously infecting people all around the world since its outbreak in 2019. Studies for numerous infection detection strategies are continuing. The sensitivity of detection methods is crucial to separate people with mild infections from people who are asymptomatic. In this sense, a strategy that would help to capture and isolate the SARS-CoV-2 virus prior to tests can be effective and beneficial. To this extent, genetically engineered biomaterials grounding from the biofilm protein of Escherichia coli are beneficial due to their robustness and adaptability to various application areas. Through functionalizing the E. coli biofilm protein, diverse properties can be attained such as enzyme display, nanoparticle production, and medical implant structures. Here, E. coli species are employed to express major curli protein CsgA and Griffithsin (GRFT) as fusion proteins, through a complex formation using SpyTag and SpyCatcher domains. In this study, a complex system with a CsgA scaffold harboring the affinity of GRFT against Spike protein to capture and isolate SARS-CoV-2 virus is successfully developed. It is shown that the hybrid recombinant protein can dramatically increase the sensitivity of currently available lateral flow assays for Sars-CoV-2 diagnostics.

A Magnetosome-Based Platform for Flow Biocatalysis

Biocatalysis in flow reactor systems is of increasing importance for the transformation of the chemical industry. However, the necessary immobilization of biocatalysts remains a challenge. We here demonstrate that biogenic magnetic nanoparticles, so-called magnetosomes, represent an attractive alternative for the development of nanoscale particle formulations to enable high and stable conversion rates in biocatalytic flow processes. In addition to their intriguing material characteristics, such as high crystallinity, stable magnetic moments, and narrow particle size distribution, magnetosomes offer the unbeatable advantage over chemically synthesized nanoparticles that foreign protein "cargo" can be immobilized on the enveloping membrane via genetic engineering and thus, stably presented on the particle surface. To exploit these advantages, we develop a modular connector system in which abundant magnetosome membrane anchors are genetically fused with SpyCatcher coupling groups, allowing efficient covalent coupling with complementary SpyTag-functionalized proteins. The versatility of this approach is demonstrated by immobilizing a dimeric phenolic acid decarboxylase to SpyCatcher magnetosomes. The functionalized magnetosomes outperform similarly functionalized commercial particles by exhibiting stable substrate conversion during a 60 h period, with an average space-time yield of 49.2 mmol L^-1 h^-1. Overall, our results demonstrate that SpyCatcher magnetosomes significantly expand the genetic toolbox for particle surface functionalization and increase their application potential as nano-biocatalysts.

In Vitro Biosynthesis of Isobutyraldehyde Through the Establishment of a One-Step Self-Assembly-Based Immobilization Strategy

The in vitro biosynthesis of high-value compounds has become popular and attractive. The convenient and simple strategy of enzyme immobilization has been significant for continuous and efficient in vitro biosynthesis. On the basis of that, this work established a one-step self-assembly-based immobilization strategy to efficiently biosynthesize isobutyraldehyde in vitro. Isobutyraldehyde is a crucial precursor for the synthesis of foods and spices. The established CipA scaffold-based strategy can express and immobilize enzymes at the same time, and purification requires only one centrifugation step. Structural simulations indicated that this scaffold-dependent self-assembly did not influence the structure or catalytic mechanisms of the isobutyraldehyde production-related enzymes leucine dehydrogenase (LeuDH) and ketoisovalerate decarboxylase (Kivd). Immobilized LeuDH and Kivd displayed a higher conversion capacity and thermal stability than the free enzymes. Batch conversion experiments demonstrated that the recovered immobilized LeuDH and Kivd have similar conversion capacities to the enzymes used in the first round of reaction. The continuous production of isobutyraldehyde was achieved by filling the immobilized enzymes into the column of a constructed device. This study not only expands the application range of self-assembly systems but also provides guidance for the in vitro production of value-added compounds.

Heterologous Expression of a Thermostable Chitinase from Myxococcus xanthus and Its Application for High Yield Production of Glucosamine from Shrimp Shell

Glucosamine (GlcN) is a widely used food supplement. Hence, enormous attention has been concerned with enzymatic production of GlcN owing to its advantage over a chemical approach. In this study, a previously unstudied chitinase gene (MxChi) in the genome of Myxococcus xanthus was cloned, expressed in recombinant soluble form and purified to homogeneity. TLC-, UPLC-, and microplate-reader- based activity tests confirmed MxChi hydrolyzes colloidal chitin to chitobiose as sole product. The optimal catalytic pH and temperature of MxChi was identified as 7.0 and 55 °C, respectively. MxChi exhibited 80% activity after 72 h incubation at 37 °C. The site-directed mutagenesis revealed that the amino acids D323A, D325A, and E327A of MxChi were in the DXDXE catalytic motif of GH18. When coupled with β-N-acetylhexosaminidase (SnHex) and deacetylase (CmCBDA), the enzyme allowed one-pot extraction of GlcN from colloidal chitin and shrimp shell. The optimal condition was 37 °C, pH 8.0, and 1/3/16.5 (MxChi/SnHex/CmCBDA), conducted by orthogonal design for the enzymatic cascades. Under this condition, the yield of GlcN was 26.33 mg from 400 mg shrimp shell. Facile recombinant in E. coli, robust thermostability and pure product herein makes newly discovered chitinase a valuable candidate for the green recycling of chitin rich waste.

A Modular System for the Rapid Comparison of Different Membrane Anchors for Surface Display on Escherichia coli

Comparison of different membrane anchor motifs for the surface display of a protein of interest (passenger) is crucial for achieving the best possible performance. However, generating genetic fusions of the passenger to various membrane anchors is time-consuming. We herein employ a recently developed modular display system, in which the membrane anchor and the passenger are expressed separately and assembled in situ via SpyCatcher and SpyTag interaction, to readily combine a model passenger cytochrome P450 BM3 (BM3) with four different membrane anchors (Lpp-OmpA, PgsA, INP and AIDA-I). This approach has the significant advantage that passengers and membrane anchors can be freely combined in a modular fashion without the need to generate direct genetic fusion constructs in each case. We demonstrate that the membrane anchors impact not only cell growth and membrane integrity, but also the BM3 surface display capacity and whole-cell biocatalytic activity. The previously used Lpp-OmpA as well as PgsA were found to be efficient for the display of BM3 via SpyCatcher/SpyTag interaction. Our strategy can be transferred to other user-defined anchor and passenger combinations and could thus be used for acceleration and improvement of various applications involving cell surface display.

Biofilm-Mediated Immobilization of a Multienzyme Complex for Accelerating Inositol Production from Starch

Bacterial biofilm, as a natural and renewable material, is a promising architecture for enzyme immobilization. In this study, we have demonstrated the feasibility of an Escherichia coli biofilm to immobilize a self-assembly multienzyme complex by the covalent interaction between a peptide SpyTag and its protein partner SpyCatcher. The SpyTag-labeled biofilm is displayed on the surface of E. coli by overexpressing the recombinant CsgA-SpyTag, in which CsgA is capable of forming biofilms. This SpyTag bearing biofilm is used to bind with SpyCatcher bearing synthetic mini-scaffoldin, which also contains a carbohydrate-binding module 3 (CBM3), and four different cohesins from different microorganisms. CBM3 was used to bind with cellulose, while the four different cohesins were used to recruit four dockerin-containing cascade enzymes, which were subsequently applied to convert starch to myo-inositol. Compared to the free enzyme mixture, the biofilm-immobilized enzyme complex exhibited a 4.28 times increase in initial reaction rate in producing myo-inositol from 10 g/L maltodextrin (a derivative of starch). Additionally, this biofilm-immobilized enzyme complex showed much higher recycle ability than the enzyme complex which was immobilized on a regenerated amorphous cellulose (RAC) system. In conclusion, the biofilm-mediated immobilization of the enzymatic biosystem provides a promising strategy to increase the reaction rate and enhance the stability of an in vitro enzymatic biosystem, exhibiting high potential to improve the efficiency of an in vitro biosystem.

Synthetic biology as driver for the biologization of materials sciences

Materials in nature have fascinating properties that serve as a continuous source of inspiration for materials scientists. Accordingly, bio-mimetic and bio-inspired approaches have yielded remarkable structural and functional materials for a plethora of applications. Despite these advances, many properties of natural materials remain challenging or yet impossible to incorporate into synthetic materials. Natural materials are produced by living cells, which sense and process environmental cues and conditions by means of signaling and genetic programs, thereby controlling the biosynthesis, remodeling, functionalization, or degradation of the natural material. In this context, synthetic biology offers unique opportunities in materials sciences by providing direct access to the rational engineering of how a cell senses and processes environmental information and translates them into the properties and functions of materials. Here, we identify and review two main directions by which synthetic biology can be harnessed to provide new impulses for the biologization of the materials sciences: first, the engineering of cells to produce precursors for the subsequent synthesis of materials. This includes materials that are otherwise produced from petrochemical resources, but also materials where the bio-produced substances contribute unique properties and functions not existing in traditional materials. Second, engineered living materials that are formed or assembled by cells or in which cells contribute specific functions while remaining an integral part of the living composite material. We finally provide a perspective of future scientific directions of this promising area of research and discuss science policy that would be required to support research and development in this field.

Engineering bioscaffolds for enzyme assembly

With the demand for green, safe, and continuous biocatalysis, bioscaffolds, compared with synthetic scaffolds, have become a desirable candidate for constructing enzyme assemblages because of their biocompatibility and regenerability. Biocompatibility makes bioscaffolds more suitable for safe and green production, especially in food processing, production of bioactive agents, and diagnosis. The regenerability can enable the engineered biocatalysts regenerate through simple self-proliferation without complex re-modification, which is attractive for continuous biocatalytic processes. In view of the unique biocompatibility and regenerability of bioscaffolds, they can be classified into non-living (polysaccharide, nucleic acid, and protein) and living (virus, bacteria, fungi, spore, and biofilm) bioscaffolds, which can fully satisfy these two unique properties, respectively. Enzymes assembled onto non-living bioscaffolds are based on single or complex components, while enzymes assembled onto living bioscaffolds are based on living bodies. In terms of their unique biocompatibility and regenerability, this review mainly covers the current advances in the research and application of non-living and living bioscaffolds with focus on engineering strategies for enzyme assembly. Finally, the future development of bioscaffolds for enzyme assembly is also discussed. Hopefully, this review will attract the interest of researchers in various fields and empower the development of biocatalysis, biomedicine, environmental remediation, therapy, and diagnosis.

Binding Peptide-Guided Immobilization of Lipases with Significantly Improved Catalytic Performance Using Escherichia coli BL21(DE3) Biofilms as a Platform

Developing novel immobilization methods to maximize the catalytic performance of enzymes has been a permanent pursuit of scientific researchers. Engineered Escherichia coli biofilms have attracted great concern as surface display platforms for enzyme immobilization. However, current biological conjugation methods, such as the SpyTag/SpyCatcher tagging pair, that immobilize enzymes onto E. coli biofilms seriously hamper enzymatic performance. Through phage display screening of lipase-binding peptides (LBPs) and co-expression of CsgB (nucleation protein of curli nanofibers) and LBP2-modified CsgA (CsgALBP2, major structural subunit of curli nanofibers) proteins, we developed E. coli BL21::ΔCsgA-CsgB-CsgALBP2 (LBP2-functionalized) biofilms as surface display platforms to maximize the catalytic performance of lipase (Lip181). After immobilization onto LBP2-functionalized biofilm materials, Lip181 showed increased thermostability, pH, and storage stability. Surprisingly, the relative activity of immobilized Lip181 increased from 8.43 to 11.33 U/mg through this immobilization strategy. Furthermore, the highest loading of lipase on LBP2-functionalized biofilm materials reached up to 27.90 mg/g of wet biofilm materials, equivalent to 210.49 mg/g of dry biofilm materials, revealing their potential as a surface with high enzyme loading capacity. Additionally, immobilized Lip181 was used to hydrolyze phthalic acid esters, and the hydrolysis rate against dibutyl phthalate was up to 100%. Thus, LBP2-mediated immobilization of lipases was demonstrated to be far more advantageous than the traditional SpyTag/SpyCatcher strategy in maximizing enzymatic performance, thereby providing a better alternative for enzyme immobilization onto E. coli biofilms.

Tagging and catching: rapid isolation and efficient labeling of organelles using the covalent Spy-System in planta

BACKGROUND

Up-to-now, several biochemical methods have been developed to allow specific organelle isolation from plant tissues. These procedures are often time consuming, require substantial amounts of plant material, have low yield or do not result in pure organelle fractions. Moreover, barely a protocol allows rapid and flexible isolation of different subcellular compartments. The recently published SpySystem enables the in vitro and in vivo covalent linkage between proteins and protein complexes. Here we describe the use of this system to tag and purify plant organelles.

RESULTS

We developed a simple and specific method to in vivo tag and visualize, as well as isolate organelles of interest from crude plant extracts. This was achieved by expressing the covalent split-isopeptide interaction system, consisting of SpyTag and SpyCatcher, in Nicotiana benthamiana leaves. The functionality of the SpySystem in planta, combined with downstream applications, was proven. Using organelle-specific membrane anchor sequences to program the sub-cellular localization of the SpyTag peptide, we could tag the outer envelope of chloroplasts and mitochondria. By co-expression of a cytosolic, soluble eGFP-SpyCatcher fusion protein, we could demonstrate intermolecular isopeptide formation in planta and proper organelle targeting of the SpyTag peptides to the respective organelles. For one-step organelle purification, recombinantly expressed SpyCatcher protein was immobilized on magnetic microbeads via covalent thiol-etherification. To isolate tagged organelles, crude plant filtrates were mixed with SpyCatcher-coated beads which allowed isolation of SpyTag-labelled chloroplasts and mitochondria. The isolated organelles were intact, showed high yield and hardly contaminants and can be subsequently used for further molecular or biochemical analysis.

CONCLUSION

The SpySystem can be used to in planta label subcellular structures, which enables the one-step purification of organelles from crude plant extracts. The beauty of the system is that it works as a covalent toolbox. Labeling of different organelles with individual tags under control of cell-specific and/or inducible promoter sequences will allow the rapid organelle and cell-type specific purification. Simultaneous labeling of different organelles with specific Tag/Catcher combinations will enable simultaneous isolation of different organelles from one plant extract in future experiments.

Power to the protein: enhancing and combining activities using the Spy toolbox

Proteins span an extraordinary range of shapes, sizes and functionalities. Therefore generic approaches are needed to overcome this diversity and stream-line protein analysis or application. Here we review SpyTag technology, now used in hundreds of publications or patents, and its potential for detecting and controlling protein behaviour. SpyTag forms a spontaneous and irreversible isopeptide bond upon binding its protein partner SpyCatcher, where both parts are genetically-encoded. New variants of this pair allow reaction at a rate approaching the diffusion limit, while reversible versions allow purification of SpyTagged proteins or tuned dynamic interaction inside cells. Anchoring of SpyTag-linked proteins has been established to diverse nanoparticles or surfaces, including gold, graphene and the air/water interface. SpyTag/SpyCatcher is mechanically stable, so is widely used for investigating protein folding and force sensitivity. A toolbox of scaffolds allows SpyTag-fusions to be assembled into defined multimers, from dimers to 180-mers, or unlimited 1D, 2D or 3D networks. Icosahedral multimers are being evaluated for vaccination against malaria, HIV and cancer. For enzymes, Spy technology has increased resilience, promoted substrate channelling, and assembled hydrogels for continuous flow biocatalysis. Combinatorial increase in functionality has been achieved through modular derivatisation of antibodies, light-emitting diodes or viral vectors. In living cells, SpyTag allowed imaging of protein trafficking, retargeting of CAR-T cell killing, investigation of heart contraction, and control of nucleosome position. The simple genetic encoding and rapid irreversible reaction provide diverse opportunities to enhance protein function. We describe limitations as well as future directions.

Efficient Multi-Enzymes Immobilized on Porous Microspheres for Producing Inositol From Starch

In vitro synthetic enzymatic biosystem is considered to be the next generation of biomanufacturing platform. This biosystem contains multiple enzymes for the implementation of complicated biotransformatiom. However, the hard-to-reuse and instability of multiple enzymes limit the utilization of this biosystem in industrial process. Multi-enzyme immobilization might be a feasible alternative to address these problems. Herein, porous microspheres are used as carriers to co-immobilize multiple enzymes for producing inositol from starch. At first, all the enzymes (i.e., α-glucan phosphorylase aGP, phosphoglucose mutase PGM, inositol 1-phosphate synthase IPS, and inositol monophosphatase IMP) for converting starch to inositol were immobilized on porous microspheres individually to check the effect of immobilization, then all the enzymes are co-immobilized on porous microspheres. Compared to reaction system containing all the individual immobilized enzymes, the reaction system containing the co-immobilized enzymes exhibit ∼3.5 fold of reaction rate on producing inositol from starch. This reaction rate is comparable to that by free enzyme mixture. And the co-immobilized multi-enzyme system show higher thermal stability and recovery stability than free enzyme mixture. After 7 batches, the immobilized enzymes retain 45.6% relative yield, while the free enzyme mixture only retain 13.3% relative yield after 3 batches. Co-immobilization of multiple enzymes on porous microspheres for biomanufacturing would shed light on the application of in vitro synthetic enzymatic biosystem in industrial scale.

Biofilm architecture: An emerging synthetic biology target

Synthetic biologists are exploiting biofilms as an effective mechanism for producing various outputs. Metabolic optimization has become commonplace as a method of maximizing system output. In addition to production pathways, the biofilm itself contributes to the efficacy of production. The purpose of this review is to highlight opportunities that might be leveraged to further enhance production in preexisting biofilm production systems. These opportunities may be used with previously established production systems as a method of improving system efficiency further. This may be accomplished through the reduction in the cost of establishing and maintaining biofilms, and maintenance of the enhancement of product yield per unit of time, per unit of area, or per unit of required input.

Developing a Protein Scaffolding System for Rapid Enzyme Immobilization and Optimization of Enzyme Functions for Biocatalysis

Immobilization of enzymes is required for most biocatalytic processes, but chemistries used in enzyme immobilization are limited and can be challenging. Genetically encoded protein-based biomaterials could provide easy-to-use immobilization platforms for biocatalysts. We recently developed a self-assembling protein scaffold that covalently immobilized SpyTagged enzymes by engineering the bacterial microcompartment protein EutM from Salmonella enterica with a SpyCatcher domain. We also identified a range of EutM homologues as robust protein nanostructures with diverse architectures and electrostatic surface properties. In this work, we created a modular immobilization platform with tunable surface properties by developing a toolbox of self-assembling, robust EutM-SpyCatcher scaffolds. Using an alcohol dehydrogenase as model biocatalyst, we show that the scaffolds improve enzyme activity and stability. This work provides a modular, easy-to-use immobilization system that can be tailored for the optimal function of biocatalysts of interest.

Food Industrial Production of Monosaccharides Using Microbial, Enzymatic, and Chemical Methods

Most monosaccharides in nature are hexoses, which have six carbon atoms; the most well-known hexose is d-glucose. Various hexoses with distinct characteristics can be produced from inexpensive polysaccharides for applications in the food industry. Therefore, identification of the health-related functions of hexose will facilitate the consumption of hexoses in food products to improve quality of life. The hexoses available in foods include N-acetyl glucosamine, d-glucosamine, d-fructose, d-mannose, d-galactose, other d-hexoses, and l-hexoses. Here, an updated overview of food industrial production methods for natural hexoses by microbial, enzymatic, and chemical methods is provided.

Small, Smaller, Nano: New Applications for Potato Virus X in Nanotechnology

Nanotechnology is an expanding interdisciplinary field concerning the development and application of nanostructured materials derived from inorganic compounds or organic polymers and peptides. Among these latter materials, proteinaceous plant virus nanoparticles have emerged as a key platform for the introduction of tailored functionalities by genetic engineering and conjugation chemistry. Tobacco mosaic virus and Cowpea mosaic virus have already been developed for bioimaging, vaccination and electronics applications, but the flexible and filamentous Potato virus X (PVX) has received comparatively little attention. The filamentous structure of PVX particles allows them to carry large payloads, which are advantageous for applications such as biomedical imaging in which multi-functional scaffolds with a high aspect ratio are required. In this context, PVX achieves superior tumor homing and retention properties compared to spherical nanoparticles. Because PVX is a protein-based nanoparticle, its unique functional properties are combined with enhanced biocompatibility, making it much more suitable for biomedical applications than synthetic nanomaterials. Moreover, PVX nanoparticles have very low toxicity in vivo, and superior pharmacokinetic profiles. This review focuses on the production of PVX nanoparticles engineered using chemical and/or biological techniques, and describes current and future opportunities and challenges for the application of PVX nanoparticles in medicine, diagnostics, materials science, and biocatalysis.

Monitoring Candida parapsilosis and Staphylococcus epidermidis Biofilms by a Combination of Scanning Electron Microscopy and Raman Spectroscopy

The biofilm-forming microbial species Candida parapsilosis and Staphylococcus epidermidis have been recently linked to serious infections associated with implanted medical devices. We studied microbial biofilms by high resolution scanning electron microscopy (SEM), which allowed us to visualize the biofilm structure, including the distribution of cells inside the extracellular matrix and the areas of surface adhesion. We compared classical SEM (chemically fixed samples) with cryogenic SEM, which employs physical sample preparation based on plunging the sample into various liquid cryogens, as well as high-pressure freezing (HPF). For imaging the biofilm interior, we applied the freeze-fracture technique. In this study, we show that the different means of sample preparation have a fundamental influence on the observed biofilm structure. We complemented the SEM observations with Raman spectroscopic analysis, which allowed us to assess the time-dependent chemical composition changes of the biofilm in vivo. We identified the individual spectral peaks of the biomolecules present in the biofilm and we employed principal component analysis (PCA) to follow the temporal development of the chemical composition.