Foaming Properties and Linear and Nonlinear Surface Dilatational Rheology of Sodium Caseinate, Tannin Acid, and Octenyl Succinate Starch Ternary Complex

Esterification of dextran by octenyl succinic anhydride (OSA): Physicochemical characterization and functional properties assessment

The chemical modification of biopolymers to enhance their functional properties in the food, cosmetic, and pharmaceutical industries is an area of particular interest today. In this study, different molecular weight dextrans were chemically modified for the first time with octenyl succinic anhydride (OSA). This reaction involves an esterification process wherein the hydroxy groups of dextran are partially substituted by a carbonaceous chain, imparting hydrophobic properties to dextran molecules and, consequently, an amphiphilic nature. To assess and quantify the incorporation of OSA into the dextran structure, reaction products were analysed using NMR and FTIR. Additionally, the thermal properties, the Z-potential and the foaming and emulsifying capacity of both native and modified dextrans were examined. The introduction of OSA groups to dextran molecules, with degrees of substitution between 0.028 and 0.058, increased the zeta potential and the thermal stability of the polymer. Furthermore, the chemical modification of dextran backbone with this radical conferred a hydrophobic nature to the biopolymer, which enhance its foaming and emulsifying capacity. Therefore, these results demonstrate that the incorporation of hydrophobic moieties into dextran polymers improves their functional properties and broadens their potential applications in the industry.

Synergistic effect of gellan gum and guar gum on improving the foaming properties of soy protein isolate-based complexes: Interaction mechanism and interfacial behavior

Interactions among multi-component play a critical role in modulating the foaming properties of aerated foods. This study evaluated the mechanisms of synergistic improvement of gellan gum (GEG) and guar gum (GUG) on the foaming properties of soy protein isolate (SPI)-based complex. The results showed that the GEG/GUG ratio was closely related to the intermolecular interactions of SPI-based ternary complex and the dynamical changing of its foaming properties. The SPI/GEG/GUG ternary complex with a GEG/GUG ratio of 2/3 exhibited the highest foamability (195 %) and comparable foam stability (99.17 %), which were 32.95 % and 2.99 % higher than that of SPI/GEG binary complex. At this ratio, GUG promoted the interactions between SPI and GEG, and bound to complex's surface through hydrogen bonding, resulting in the increase of particle size and surface charge, and the decrease of surface hydrophobicity. Although this reduced the diffusion of complex onto the air/water interface, it increased permeation rate and molecular rearrangement behavior, which were the potential mechanisms to improve the foaming properties. Additionally, the synergistic effect of GEG and GUG also enhanced the elastic strength and solid characteristics of foam systems. This study provided a theoretical guidance for the targeted modulation of foaming properties of multi-component aerated foods.

Oral soluble shell prepared from OSA starch incorporated with tea polyphenols for the microencapsulation of Sichuan pepper oleoresin: Characterization, flavor stability, release mechanisms and its application in mooncake

The market share of Sichuan pepper oleoresin (SPO) in the flavor industry is increasing steadily; however, its high volatility, low water solubility, and poor stability continue to pose significant challenges to application. The microencapsulation prepared by emulsion embedding and spray drying is considered as an effective technique to solve the above problems. Sodium octenyl succinate starch (OSA starch) and tea polyphenols (TPs) were used to develop OSA-TPs complex as encapsulants for SPO to prepare orally soluble microcapsules. And the optimum doping of TPs was determined. SPO microcapsules have good properties with high encapsulation efficiency up to 88.13 ± 1.48% and high payload up to 41.58 ± 1.86% with low water content and high heat resistance. The binding mechanism of OSA starch with TPs and its regulation mechanism and effect on SPOs were further analyzed and clarified. The binding mechanism between OSA starch and TPs was clarified in further analyses. The OSA-TPs complexes enhanced the rehydration, release in food matrix and storage stability of SPO, and exhibited good sensory immediacy. Flavor-improved mooncakes were successfully developed, achieving the combination of mooncake flavor and SPO flavor. This study provided a valuable way to prepare flavoring microcapsules suitable for the catering industry, opened up the combined application of SPO and bakery ingredients, and was of great practical value and significance for improving the processing quality of flavor foods, driving the development of the SPO industry, and enhancing the national dietary experience.

Interfacial Behavior and Long-Term Stability of the Emulsions Stabilized by Sugar Beet Pectin-Ca2+ Complexes with Different Cross-Linking Degrees

Recent studies showed that sugar beet pectin exhibited more excellent emulsifying properties than traditional citrus peel pectin and apple pectin ascribed to the higher content of neutral sugar, protein, ferulic acid, and acetyl groups. It is precisely because of the extremely complex molecular structure of pectin that the emulsifying properties of the pectin-Ca2+ complex are still unclear. In this study, SBP-Ca2+ complexes with different cross-linking degrees were prepared. Subsequently, their interfacial adsorption kinetics, the resistance of interfacial films to external perturbances, and the long-term stability of the emulsions formed by these SBP-Ca2+ complexes were measured. The results indicated that the highly cross-linked SBP-Ca2+ complex exhibited slower interfacial adsorption kinetics than SBP alone. Moreover, compared with SBP alone, the oil-water interfacial film loaded by the highly cross-linked SBP-Ca2+ complex exhibited a lower elasticity and a poorer resistance to external perturbances. This resulted in a larger droplet size, a lower ζ-potential value, a larger continuous viscosity, and a worse long-term stability of the emulsion formed by the highly cross-linked SBP-Ca2+ complex. This study has very important guiding significance for deeply understanding the emulsification mechanism of the pectin-Ca2+ complex.

An overview of edible foams in food and modern cuisine: Destabilization and stabilization mechanisms and applications

Foam, as a structured multi-scale colloidal system, is becoming increasingly popular in food because it gives a series of unique textures, structures, and appearances to foods while maintaining clean labels. Recently, developing green and healthy food-grade foaming agents, improving the stability of edible foams, and exploring the application of foam structures and new foaming agents have been the focus of foam systems. This review comprehensively introduces the destabilization mechanisms of foam and summarizes the main mechanisms controlling the foam stability and progress of different food-grade materials (small-molecular surfactants, biopolymers, and edible Pickering particles). Furthermore, the classic foam systems in food and modern cuisine, their applications, developments, and challenges are also underlined. Natural small-molecular surfactants, novel plant/microalgae proteins, and edible colloidal particles are the research hotspots of high-efficiency food-grade foam stabilizers. They have apparent differences in foam stability mechanisms, and each exerts its advantages. However, the development of foam stabilizers remains to be enriched compared with emulsions. Food foams are diverse and widely used, bringing unique enjoyment and benefit to consumers regarding sense, innovation, and health attributes. In addition to industrial inflatable foods, the foam foods in molecular gastronomy are also worthy of exploration. Moreover, edible foams may have greater potential in structured food design, 3D/4D printing, and controlled flavor release in the future. This review will provide a reference for the efficient development of functional inflatable foods and the advancement of foam technologies in modern cuisine.

The emulsifying ability of oleosomes and their interfacial molecules

Oleosomes are natural oil droplets, present in all organisms and abundant in oilseeds. After their aqueous extraction from oilseeds, they can be directly utilized as oil droplets in food, cosmetics and all types of oil-in-water emulsion systems. However, to expand the potential uses of oleosomes as green ingredients and to valorize oilseeds as efficient as possible, we explored their emulsifying ability. Oleosomes were extracted from rapeseeds, and 10.0 wt% oil-in-water emulsions were created after homogenization with 0.5-6.0 wt% oleosomes, and the droplet size of the emulsions and their structure was measured by laser diffraction and confocal laser scanning microscopy (CLSM), respectively. The emulsion with an oleosome concentration lower than 1.0 wt% gave unstable emulsions with visible free oil. At oleosome concentrations at 1.5 wt% or higher, we obtained stable emulsions with droplet sizes between 2.0 and 12.0 µm. To investigate the role of the oleosome interfacial molecules in stabilizing emulsions we also studied their emulsifying and interfacial properties (using drop tensiometry) after isolating them from the oleosome structure. Both oleosomes and their isolated interfacial molecules exhibited a similar behavior on the oil-water interfaces, forming predominantly elastic interfacial films, and also showed a similar emulsifying ability. Our results show that oleosomes are not stabilizing the oil-in-water emulsions as intact particles, but they provide their interfacial molecules, which are enough to stabilize an oil-water surface up to about 2 times bigger than the initial oleosome surface. The understanding of the behavior of oleosomes as emulsifiers, opens many possibilities to use oleosomes as alternative to synthetic emulsifiers in food and pharma applications.

Surface stress decomposition in large amplitude oscillatory interfacial dilatation of complex interfaces

HYPOTHESIS

Multiphase materials are often subjected to large deformations during processing, but the rheological responses of complex interfaces (e.g. stabilized by proteins) in this nonlinear deformation regime are still poorly understood. We expect nonlinearities in the response to be introduce by changes of the interfacial network and surface density of the emulsifier.

EXPERIMENTS

Large amplitude oscillatory dilatation (LAOD) experiments were performed on WPI-, pea albumin-, pea globulin- and rapeseed lecithin-stabilized interfaces and analyzed with a general stress decomposition (GSD). With GSD, the stress response was decomposed into the four stress terms (τ₁-τ₄). Here, τ₁ and τ₂ represent, the elastic and viscous contribution of the odd Fourier harmonics, and τ₃ and τ₄ represent the dissipative and recoverable contribution of the even harmonics.

FINDINGS

Analysis of WPI-, pea albumin-, pea globulin- and rapeseed lecithin-stabilized interfaces revealed that higher odd harmonics (k≥3) describe in-plane network responses and that even harmonics describe surface density changes. Analysis of these complex interfaces showed that GSD is a valuable tool for (quantitative) description of interfacial responses in LAOD, providing new insights into the origin of asymmetric nonlinear stress responses.

The Conformational Changes of Bovine Serum Albumin at the Air/Water Interface: HDX-MS and Interfacial Rheology Analysis

The characterization and dynamics of protein structures upon adsorption at the air/water interface are important for understanding the mechanism of the foamability of proteins. Hydrogen-deuterium exchange, coupled with mass spectrometry (HDX-MS), is an advantageous technique for providing conformational information for proteins. In this work, an air/water interface, HDX-MS, for the adsorbed proteins at the interface was developed. The model protein bovine serum albumin (BSA) was deuterium-labeled at the air/water interface in situ for different predetermined times (10 min and 4 h), and then the resulting mass shifts were analyzed by MS. The results indicated that peptides 54-63, 227-236, and 355-366 of BSA might be involved in the adsorption to the air/water interface. Moreover, the residues L55, H63, R232, A233, L234, K235, A236, R359, and V366 of these peptides might interact with the air/water interface through hydrophobic and electrostatic interactions. Meanwhile, the results showed that conformational changes of peptides 54-63, 227-236, and 355-366 could lead to structural changes in their surrounding peptides, 204-208 and 349-354, which could cause the reduction of the content of helical structures in the rearrangement process of interfacial proteins. Therefore, our air/water interface HDX-MS method could provide new and meaningful insights into the spatial conformational changes of proteins at the air/water interface, which could help us to further understand the mechanism of protein foaming properties.

Correlation between interfacial layer properties and physical stability of food emulsions: current trends, challenges, strategies, and further perspectives

Emulsions are thermodynamically unstable systems that tend to separate into two immiscible phases over time. The interfacial layer formed by the emulsifiers adsorbed at the oil-water interface plays an important role in the emulsion stability. The interfacial layer properties of emulsion droplets have been considered the cutting-in points that influence emulsion stability, a traditional motif of physical chemistry and colloid chemistry of particular significance in relation to the food science and technology sector. Although many attempts have shown that high interfacial viscoelasticity may contribute to long-term emulsion stability, a universal relationship for all cases between the interfacial layer features at the microscopic scale and the bulk physical stability of the emulsion at the macroscopic scale remains to be established. Not only that, but integrating the cognition from different scales of emulsions and establishing a unified single model to fill the gap in awareness between scales also remain challenging. In this review, we present a comprehensive overview of recent progress in the general science of emulsion stability with a peculiar focus on interfacial layer characteristics in relation to the formation and stabilization of food emulsions, where the natural origin and edible safety of emulsifiers and stabilizers are highly requested. This review begins with a general overview of the construction and destruction of interfacial layers in emulsions to highlight the most important physicochemical characteristics of interfacial layers (formation kinetics, surface load, interactions among adsorbed emulsifiers, thickness and structure, and shear and dilatational rheology), and their roles in controlling emulsion stability. Subsequently, the structural effects of a series of typically dietary emulsifiers (small-molecule surfactants,proteins, polysaccharides, protein-polysaccharide complexes, and particles) on oil-water interfaces in food emulsions are emphasized. Finally, the main protocols developed for modifying the structural characteristics of adsorbed emulsifiers at multiple scales and improving the stability of emulsions are highlighted. Overall, this paper aims to comprehensively study the literature findings in the past decade and find out the commonality of multi-scale structures of emulsifiers, so as to deeply understand the common characteristics and emulsification stability behaviour of adsorption emulsifiers with different interfacial layer structures. It is difficult to say that there has been significant progress in the underlying principles and technologies in the general science of emulsion stability over the last decade or two. However, the correlation between interfacial layer properties and physical stability of food emulsions promotes revealing the role of interfacial rheological properties in emulsion stability, providing guidance on controlling the bulk properties by tuning the interfacial layer functionality.

Multiscale combined techniques for evaluating emulsion stability: A critical review

Emulsions are multiscale and thermodynamically unstable systems which will undergo various unstable processes over time. The behavior of emulsifier molecules at the oil-water interface and the properties of the interfacial film are very important to the stability of the emulsion. In this paper, we mainly discussed the instability phenomena and mechanisms of emulsions, the effects of interfacial films on the long-term stability of emulsions and summarized a set of systematic multiscale combined methods for studying emulsion stability, including droplet size and distribution, zeta-potential, the continuous phase viscosity, adsorption mass and thickness of the interfacial film, interfacial dilatational rheology, interfacial shear rheology, particle tracking microrheology, visualization technologies of the interfacial film, molecular dynamics simulation and the quantitative evaluation methods of emulsion stability. This review provides the latest research progress and a set of systematic multiscale combined techniques and methods for researchers who are committed to the study of oil-water interface and emulsion stability. In addition, this review has important guiding significances for designing and customizing interfacial films with different properties, so as to obtain emulsion-based delivery systems with varying stability, oil digestibility and bioactive substance utilization.

Impact of Particle Sedimentation in Pendant Drop Tensiometry

Understanding the interface-stabilizing properties of surface-active components is key in designing stable macroscopic multiphase systems, such as emulsions and foams. When poorly soluble materials are used as an interface stabilizer, the insoluble material may sediment and interfere with the analysis of interfacial properties in pendant (or hanging) drop tensiometry. Here, the impact of sedimentation of particles on the interfacial properties determined by pendant drop tensiometry was evaluated using a model system of whey protein isolate and (non surface-active) glass beads (2.2-34.7 μm). Although the glass beads did not adsorb to the air-water interface, a 1% (w/w) glass bead solution appeared to decrease the surface tension by nearly 12 mN/m after 3 h. A similar effect was shown for a mixture of whey proteins and glass beads: the addition of 1% (w/w) of glass beads led to an apparent surface tension decrease of 31 mN/m rather than the 20 mN/m observed for pure whey proteins. These effects are attributed to the sedimentation of particles near the apex of the droplet, leading to droplet shape changes, which are interpreted as a decrease in surface tension using tensiometer software. The droplet density at the apex increases due to sedimentation, and this density increase is not accounted for when fitting the droplet shape with the Young-Laplace equation. The result is the observed apparent decrease in surface tension. In contrast to the significant impact of sedimenting material on the surface tension measurements, the impact on the results of oscillatory deformations was limited. These findings show that the impact of sedimentation should be considered when studying the interface-stabilizing properties of materials with reduced solubility, such as certain plant protein extracts. The presence of such particles should be carefully considered when conducting pendant drop tensiometry.

Nonlinear dilatational rheology of different protein aggregates at the oil-water interface

Proteins tend to self-assemble into different morphological aggregates such as nanoparticles or fibrils during heat treatment depending on the processing conditions. The protein aggregates exhibit excellent interfacial activity and even better ability to stabilize emulsions than native proteins. The interfacial rheological properties at the oil-water interface play a very important role in emulsion stability, among which the interfacial nonlinear rheology is closely related to their ability to resist large perturbation. However, there are very few studies reporting the nonlinear interfacial rheological behavior of protein aggregates at the oil-water interface. In this study, β-lactoglobulin fibrous aggregates (F) and nanoparticle aggregates (NP) were prepared, and the adsorption kinetics and dilatational nonlinear rheological behavior of β-lactoglobulin aggregates at the oil-water interface under large amplitude deformation were studied using a pendant drop tensiometer, and compared with those of native proteins. From the adsorption experiments, the adsorption of protein aggregates, especially fibrils, was faster than that of native proteins in the early stage, while in the late stage, the native proteins displayed a significantly higher degree of rearrangement than the fibrils. The surface hydrophobicity and the short fibrils present mainly determine the properties of the fibril interface, while the behavior of the nanoparticle interface was significantly influenced by the size and charge properties of the nanoparticles. From the dilatational experiment, the Lissajous plots revealed that the F interface at all pHs evaluated and the βlg interface at pH 5.8 displayed strain softening in both expansion and compression processes, while the NP interface at all pHs and βlg interface at pH 2 and pH 7 displayed strain softening in expansion and strain hardening in compression processes. The nonlinear response of the protein aggregates at the oil-water interface was more obvious at pH 5.8. The modulus change from frequency sweeps revealed that the fibril interface was strong but not very structured in contrast to that formed by the native proteins which displays high structuration although weak in strength, whereas the strength of the interface formed by protein nanoparticles is in between, but more sensitive to the surface charge.

Molecular mechanism underlying the effects of temperature and pH on the size and surface charge of octenylsuccinated oat β-glucan aggregates

Environmental temperature and pH induced significant changes in the size and surface charge (ζ) of octenylsuccinated oat β-glucan aggregates. The underlying mechanisms were explored by using ¹H-NMR, fluorescence spectra, thermodynamic analysis, and SAXS. At pH 6.5, the size decreased with temperature while ζ continuously increased. With increasing pH at 293 K, parabolic and U-shaped trends were observed in the size and ζ, peaking at pH 8.5 and 6.5, respectively. At any tested pH, the size decreased with temperature. Overall, ζ significantly increased with temperature at each pH. As temperature increased, the compactness of hydrophobic-domains increased while the compactness of hydrophilic-domains decreased. In an acidic environment, both the compactness increased with decreasing pH, but in an alkaline environment, they decreased with pH. The compactness changes were co-driven by enthalpy and entropy and corresponded to changes in the hydrophobic interactions in hydrophobic-domains, hydrogen bonds in hydrophilic-domains and electrostatic repulsions among octenylsuccinate molecules.