Exchange–Correlation Effects for Noncovalent Interactions in Density Functional Theory

Reaction barriers at metal surfaces computed using the random phase approximation: Can we beat DFT in the generalized gradient approximation?

Reaction barriers for molecules dissociating on metal surfaces (as relevant to heterogeneous catalysis) are often difficult to predict accurately with density functional theory (DFT). Although the results obtained for several dissociative chemisorption reactions via DFT in the generalized gradient approximation (GGA), in meta-GGA, and for GGA exchange + van der Waals correlation scatter around the true reaction barrier, there is an entire class of dissociative chemisorption reactions for which GGA-type functionals collectively underestimate the reaction barrier. Little is known why GGA-DFT collectively fails in some cases and not in others, and we do not know whether other methods suffer from the same inconsistency. Here, we present barrier heights for dissociative chemisorption reactions obtained from the random phase approximation in the adiabatic-connection fluctuation-dissipation theorem (ACFDT-RPA) and from hybrid functionals with different amounts of exact exchange. By comparing the results obtained for the dissociative chemisorption reaction of H2 on Al(110) (where GGA-DFT collectively underestimates the barrier) and H2 on Cu(111) (where GGA-DFT scatters around the true barrier), we can gauge whether the inconsistent description of the systems persists for hybrid functionals and ACFDT-RPA. We find hybrid functionals to improve the relative description of the two systems, but to fall short of chemical accuracy. ACFDT-RPA improves the results further and leads to chemically accurate barriers for both systems. Together with an analysis of the density of states and the results from selected GGA, meta-GGA, and GGA exchange + van der Waals correlation functionals, these results allow us to discuss possible origins for the inconsistent behavior of GGA-based functionals for molecule-metal reaction barriers.

XDM-corrected hybrid DFT with numerical atomic orbitals predicts molecular crystal lattice energies with unprecedented accuracy

Molecular crystals are important for many applications, including energetic materials, organic semiconductors, and the development and commercialization of pharmaceuticals. The exchange-hole dipole moment (XDM) dispersion model has shown good performance in the calculation of relative and absolute lattice energies of molecular crystals, although it has traditionally been applied in combination with plane-wave/pseudopotential approaches. This has limited XDM to use with semilocal functional approximations, which suffer from delocalization error and poor quality conformational energies, and to systems with a few hundreds of atoms at most due to unfavorable scaling. In this work, we combine XDM with numerical atomic orbitals, which enable the efficient use of XDM-corrected hybrid functionals for molecular crystals. We test the new XDM-corrected functionals for their ability to predict the lattice energies of molecular crystals for the X23 set and 13 ice phases, the latter being a particularly stringent test. A composite approach using a XDM-corrected, 25% hybrid functional based on B86bPBE achieves a mean absolute error of 0.48 kcal mol^-1 per molecule for the X23 set and 0.19 kcal mol^-1 for the total lattice energies of the ice phases, compared to recent diffusion Monte-Carlo data. These results make the new XDM-corrected hybrids not only far more computationally efficient than previous XDM implementations, but also the most accurate density-functional methods for molecular crystal lattice energies to date.

A Statistically Supported Antioxidant Activity DFT Benchmark-The Effects of Hartree-Fock Exchange and Basis Set Selection on Accuracy and Resources Uptake

Polyphenolic compounds are now widely studied using computational chemistry approaches, the most popular of which is Density Functional Theory. To ease this process, it is critical to identify the optimal level of theory in terms of both accuracy and resource usage—a challenge we tackle in this study. Eleven DFT functionals with varied Hartree–Fock exchange values, both global and range-separated hybrids, were combined with 14 differently augmented basis sets to calculate the reactivity indices of caffeic acid, a phenolic acid representative, and compare them to experimental data or a high-level of theory outcome. Aside from the main course, a validation of the widely used Janak’s theorem in the establishment of vertical ionization potential and vertical electron affinity was evaluated. To investigate what influences the values of the properties under consideration, linear regression models were developed and thoroughly discussed. The results were utilized to compute the scores, which let us determine the best and worst combinations and make broad suggestions on the final option. The study demonstrates that M06–2X/6–311G(d,p) is the best fit for such research, and, curiously, it is not necessarily essential to include a diffuse function to produce satisfactory results.

Computational Tools to Rationalize and Predict the Self-Assembly Behavior of Supramolecular Gels

Supramolecular gels form a class of soft materials that has been heavily explored by the chemical community in the past 20 years. While a multitude of experimental techniques has demonstrated its usefulness when characterizing these materials, the potential value of computational techniques has received much less attention. This review aims to provide a complete overview of studies that employ computational tools to obtain a better fundamental understanding of the self-assembly behavior of supramolecular gels or to accelerate their development by means of prediction. As such, we hope to stimulate researchers to consider using computational tools when investigating these intriguing materials. In the concluding remarks, we address future challenges faced by the field and formulate our vision on how computational methods could help overcoming them.

Requirements for an accurate dispersion-corrected density functional

Post-self-consistent dispersion corrections are now the norm when applying density-functional theory to systems where non-covalent interactions play an important role. However, there is a wide range of base functionals and dispersion corrections available from which to choose. In this work, we opine on the most desirable requirements to ensure that both the base functional and dispersion correction, individually, are as accurate as possible for non-bonded repulsion and dispersion attraction. The base functional should be dispersionless, numerically stable, and involve minimal delocalization error. Simultaneously, the dispersion correction should include finite damping, higher-order pairwise dispersion terms, and electronic many-body effects. These criteria are essential for avoiding reliance on error cancellation and obtaining correct results from correct physics.

Improved Basis-Set Incompleteness Potentials for Accurate Density-Functional Theory Calculations in Large Systems

The accurate calculation of chemical properties using density-functional theory (DFT) requires the use of a nearly complete basis set. In chemical systems involving hundreds to thousands of atoms, the cost of the calculations place practical limitations on the number of basis functions that can be used. Therefore, in most practical applications of DFT to large systems, there exists a basis-set incompleteness error (BSIE). In this article, we present the next iteration of the basis-set incompleteness potentials (BSIPs), one-electron potentials designed to correct for basis-set incompleteness error. The ultimate goal associated with the development of BSIPs is to allow the calculation of molecular properties using DFT with near-complete-basis-set results at a computational cost that is similar to a small basis set calculation. In this work, we develop BSIPs for 10 atoms in the first and second rows (H, B-F, Si-Cl) and 15 common basis sets of the Pople, Dunning, Karlsruhe, and Huzinaga types. Our new BSIPs are constructed to minimize BSIE in the calculation of reaction energies, barrier heights, noncovalent binding energies, and intermolecular distances. The BSIPs were obtained using a training set of 15 944 data points. The fitting approach employed a regularized linear least-squares method with variable selection (the LASSO method), which results in a much better fit to the training data than our previous BSIPs while, at the same time, reducing the computational cost of BSIP development. The proposed BSIPs are tested on various benchmark sets and demonstrate excellent performance in practice. Our new BSIPs are also transferable; i.e., they can be used to correct BSIE in calculations that employ density functionals other than the one used in the BSIP development (B3LYP). Finally, BSIPs can be used in any quantum chemistry program that have implemented effective-core potentials without changes to the software.

What is “many-body” dispersion and should I worry about it?

“Many-body” dispersion can refer to two distinct phenomena, here termed electronic and atomic many-body effects, both of which cause the dispersion energy to be non-additive.

Assessment of DFT for endohedral complexes' dipole moment: PNO-LCCSD-F12 as a reference method

We present a systematic evaluation of the performance of a wide range of exchange-correlation functionals and related dispersion correction schemes for the computation of dipole moments of endohedral complexes, formed through the encapsulation of an AB molecule (AB = LiF, HCl) inside carbon nanotubes (CNTs) of different diameter. The consistency and accuracy of (i) generalized gradient approximation, (ii) meta GGA, (iii) global hybrid, and (iv) range-separated hybrid density functionals are assessed. In total, 37 density functionals are tested. The results obtained using the highly accurate pair natural orbitals based explicitly correlated local coupled cluster singles doubles (PNO-LCCSD-F12) method of Werner and co-workers [Schwilk et al., J. Chem. Theory Comput., 2017, 13, 3650; Ma et al., J. Chem. Theory Comput., 2017, 13, 4871] with the aug-cc-pVTZ basis set serve as a reference. The static electric dipole moment is computed via the finite field response or, when possible, as the expectation value of the dipole operator. Among others, it is shown that functionals belonging to the class of range-separated hybrids, provide results closest to the coupled cluster reference data. In particular, the ωB97X as well as the M11 functional may be considered as a promising choice for computing electric properties of noncovalent endohedral complexes. On the other hand, the worst performance was found for the functionals which do not include the Hartree-Fock exchange. The analysis of both the coupled cluster and the DFT results indicates a strong coupling of dispersion and polarization that may also explain why lower level DFT methods, as well as Hartree-Fock and MP2, cannot yield dipole moments beyond a qualitative agreement with the higher order reference data. Interestingly, the much smaller and less systematically constructed basis sets of Pople of moderate size provide results of accuracy at least comparable with the extended Dunning's aug-cc-pVTZ basis set.

Are dispersion corrections accurate outside equilibrium? A case study on benzene

Modern approaches to modelling dispersion forces are becoming increasingly accurate, and can predict accurate binding distances and energies. However, it is possible that these successes reflect a fortuitous cancellation of errors at equilibrium. Thus, in this work we investigate whether a selection of modern dispersion methods agree with benchmark calculations across several potential-energy curves of the benzene dimer to determine if they are capable of describing forces and energies outside equilibrium. We find the exchange-hole dipole moment (XDM) model describes most cases with the highest overall agreement with reference data for energies and forces, with many-body dispersion (MBD) and its fractionally ionic (FI) variant performing essentially as well. Popular approaches, such as Grimme-D and van der Waals density functional approximations (vdW-DFAs) underperform on our tests. The meta-GGA M06-L is surprisingly good for a method without explicit dispersion corrections. Some problems with SCAN+rVV10 are uncovered and briefly discussed.

Exchange-Hole Dipole Dispersion Model for Accurate Energy Ranking in Molecular Crystal Structure Prediction II: Nonplanar Molecules

The crystal structure prediction (CSP) of a given compound from its molecular diagram is a fundamental challenge in computational chemistry with implications in relevant technological fields. A key component of CSP is the method to calculate the lattice energy of a crystal, which allows the ranking of candidate structures. This work is the second part of our investigation to assess the potential of the exchange-hole dipole moment (XDM) dispersion model for crystal structure prediction. In this article, we study the relatively large, nonplanar, mostly flexible molecules in the first five blind tests held by the Cambridge Crystallographic Data Centre. Four of the seven experimental structures are predicted as the energy minimum, and thermal effects are demonstrated to have a large impact on the ranking of at least another compound. As in the first part of this series, delocalization error affects the results for a single crystal (compound X), in this case by detrimentally overstabilizing the π-conjugated conformation of the monomer. Overall, B86bPBE-XDM correctly predicts 16 of the 21 compounds in the five blind tests, a result similar to the one obtained using the best CSP method available to date (dispersion-corrected PW91 by Neumann et al.). Perhaps more importantly, the systems for which B86bPBE-XDM fails to predict the experimental structure as the energy minimum are mostly the same as with Neumann's method, which suggests that similar difficulties (absence of vibrational free energy corrections, delocalization error,...) are not limited to B86bPBE-XDM but affect GGA-based DFT-methods in general. Our work confirms B86bPBE-XDM as an excellent option for crystal energy ranking in CSP and offers a guide to identify crystals (organic salts, conjugated flexible systems) where difficulties may appear.

The nature of three-body interactions in DFT: Exchange and polarization effects

We propose a physically motivated decomposition of density functional theory (DFT) 3-body nonadditive interaction energies into the exchange and density-deformation (polarization) components. The exchange component represents the effect of the Pauli exclusion in the wave function of the trimer and is found to be challenging for density functional approximations (DFAs). The remaining density-deformation nonadditivity is less dependent upon the DFAs. Numerical demonstration is carried out for rare gas atom trimers, Ar₂-HX (X = F, Cl) complexes, and small hydrogen-bonded and van der Waals molecular systems. None of the tested semilocal, hybrid, and range-separated DFAs properly accounts for the nonadditive exchange in dispersion-bonded trimers. By contrast, for hydrogen-bonded systems, range-separated DFAs achieve a qualitative agreement to within 20% of the reference exchange energy. A reliable performance for all systems is obtained only when the monomers interact through the Hartree-Fock potential in the dispersion-free Pauli blockade scheme. Additionally, we identify the nonadditive second-order exchange-dispersion energy as an important but overlooked contribution in force-field-like dispersion corrections. Our results suggest that range-separated functionals do not include this component, although semilocal and global hybrid DFAs appear to imitate it in the short range.

Exchange-Hole Dipole Dispersion Model for Accurate Energy Ranking in Molecular Crystal Structure Prediction

Accurate energy ranking is a key facet to the problem of first-principles crystal-structure prediction (CSP) of molecular crystals. This work presents a systematic assessment of B86bPBE-XDM, a semilocal density functional combined with the exchange-hole dipole moment (XDM) dispersion model, for energy ranking using 14 compounds from the first five CSP blind tests. Specifically, the set of crystals studied comprises 11 rigid, planar compounds and 3 co-crystals. The experimental structure was correctly identified as the lowest in lattice energy for 12 of the 14 total crystals. One of the exceptions is 4-hydroxythiophene-2-carbonitrile, for which the experimental structure was correctly identified once a quasi-harmonic estimate of the vibrational free-energy contribution was included, evidencing the occasional importance of thermal corrections for accurate energy ranking. The other exception is an organic salt, where charge-transfer error (also called delocalization error) is expected to cause the base density functional to be unreliable. Provided the choice of base density functional is appropriate and an estimate of temperature effects is used, XDM-corrected density-functional theory is highly reliable for the energetic ranking of competing crystal structures.

Reducing density-driven error without exact exchange

PBE calculations, performed non-self-consistently on densities evaluated with Rung 3.5 density functionals, give improved performance for hydrogen transfer reaction barriers.

B–Hb⋯π interaction in borane–graphene complexes: coronene as a case study

N/B/BN doping in graphene enhances adsorption of boranes.

van der Waals potential energy surfaces from the exchange-hole dipole moment dispersion model

The potential energy surfaces (PESs) of 28 simple van der Waals complexes, each consisting of a rare-gas (Rg) atom interacting with a linear molecule, are calculated using the exchange-hole dipole moment (XDM) dispersion model in conjunction with three base density functionals (HFPBE, PW86PBE, and a commensurate hybrid functional). Results are compared with literature coupled-cluster reference data. The quality of the computed PESs is assessed based on the positions of the global minima and the corresponding binding energies. Only the hybrid functional is found to provide generally reliable PESs. Dispersion-corrected HFPBE strongly underestimates the equilibrium intermolecular separations and predicts different global minima than the reference PESs for Rg–HCl, Rg–HBr, and two of the Rg–HCN complexes. Analysis of the binding-energy errors reveals that the performance of HFPBE degrades as the size of the Rg atoms increase down the group, while the performance of PW86PBE is significantly worse for strongly-polar molecules. PW86PBE, and to a lesser extent the hybrid, strongly overbind Kr–HF due to charge-transfer error. Despite this, the XDM-corrected hybrid functional displays the best overall error statistics and provides binding energies to within ca. 10 cm–1 of the coupled-cluster reference data at a greatly reduced computational cost.