Solubility of Polar and Nonpolar Aromatic Molecules in Subcritical Water: The Role of the Dielectric Constant

Green extraction of isoflavones from okara using subcritical water: Kinetics, optimization, and comparison with other water-based sustainable methods

Water has been explored as a green extraction agent for isoflavone extraction from okara. First, subcritical water (subW) was explored using two different okaras: (1) washed and dried (OKW) and (2) non-pretreated (OKC). Genistein family was the most abundant, with very low quantities in the glycitein family. Kinetic data revealed interconversion of malonyl-glycosides to β-glycosides in subW, with increasing degradation rate constants for all isoflavones with temperature. A maximum of 1229 μg isoflavone/g of dried okara was obtained at 120 °C after 30 min for OKC. Microwave (MAE) and ultrasound (UAE) technologies achieved 72.8 % and 75.4 %, of the yield of subW. Productivity at the maximum was of 41.0, 82.5 and 92.8 μg isoflavone/g dry okara min for subW, MAE, UAE. However, higher fraction of the more bioavailable forms β-glycoside + aglycone was obtained by subW.

Applying Subcritical Water Extraction to Obtain Bioactive Compounds and Cellulose Fibers from Brewer Spent Grains

Of the three types of waste generated in beer processing, brewer's spent grain (BSG) is the most abundant and has a high potential for valorization. In this work, defatted BSG (DB) was subjected to an extraction process with subcritical water at different temperatures to obtain extracts rich in phenols and the cellulosic fractions, which were also purified by using hydrogen peroxide (H2O2). The results showed that the dry extracts obtained at 170 °C were richer in phenolics (24 mg Gallic Acid Equivalent (GAE) g-1 DB), but with lower antioxidant capacity (71 mg DB·mg-1 2,2-diphenyl-1-pikryl-hydrazyl). This extract also showed the highest antibacterial potential against L. innocua (80 mg·mL-1) and E. coli (140 mg·mL-1) than those obtained at lower temperatures. The purification of cellulose from the treated residues, using hydrogen peroxide, revealed that DB is a limited source of cellulose material since the bleached fractions showed low yields (20-25%) and low cellulose purity (42-71%), even after four bleaching cycles (1 h) at pH 12 and 8% H2O2. Despite this, the subcritical water extraction method highlights the potential of a simple process as a technological option to convert underutilized side streams like beer bagasse into added-value, potential ingredients for innovative food and pharmaceutical applications.

Optimization of Pressurized Liquid Extraction (PLE) Parameters for Extraction of Bioactive Compounds from Moringa oleifera Leaves and Bioactivity Assessment

Moringa oleifera leaves are rich sources of bioactive compounds with potential health benefits, including antioxidants and anti-inflammatory agents. Pressurized liquid extraction (PLE) stands out as a promising technique for effectively extracting valuable compounds from natural sources. In this study, we aimed to optimize PLE parameters, such as temperature, extraction duration, and pressure, to maximize bioactive compound (polyphenols, flavonoids, and ascorbic acid) yield from M. oleifera leaves and evaluate their antioxidant and anti-inflammatory activities. According to the outcomes of this research, the maximum achieved total polyphenol content was 24.10 mg gallic acid equivalents (GAE)/g of dry weight (dw), and the total flavonoid content was increased up to 19.89 mg rutin equivalents (RtE)/g dw. Moreover, after HPLC-DAD analysis, neochlorogenic and chlorogenic acids, catechin and epicatechin, rutin, and narirutin were identified and quantified. As far as the optimum ascorbic acid content is concerned, it was found to be 4.77 mg/g dw. The antioxidant activity was evaluated by three different methods: ferric reducing antioxidant power (FRAP), the DPPH method, and the anti-hydrogen peroxide activity (AHPA) method, resulting in 124.29 μmol ascorbic acid equivalent (AAE)/g dw, 131.28 μmol AAE/g dw, and 229.38 μmol AAE/g dw values, respectively. Lastly, the albumin denaturation inhibition was found to be 37.54%. These findings underscore the potential of PLE as an efficient extraction method for preparing extracts from M. oleifera leaves with the maximum content of bioactive compounds.

Liquefaction of Oak Wood Using Various Solvents for Bio-oil Production

Rapidly increasing global energy demand resulting from the growing population and worldwide development has increased the consumption of limited fossil fuel. The usage causes severe environmental deterioration by CO2 emission, which has sparked interest in finding green, renewable, and sustainable alternative sources of energy. Bio-oil, derived from several biomasses via liquefaction, is a promising candidate to replace fossil fuels. Turkey's land (27%) is covered with forested areas (consisting of mostly oak trees). Therefore, it has great potential for cheap lignocellulosic feedstock forest residues from industrial applications and harvesting. In the present study, the thermal liquefaction of oak wood particles (OWP) was performed using various solvents in addition to water, namely, ethanol, 1-butanol, and 1,4-dioxane. The experiments were carried out in a batch reactor for 1 and 2 h residence times at different temperatures (210, 240, and 270 °C). Bio-oil samples obtained at 270 °C and a 1 h residence time determined as optimum conditions were analyzed with TGA, CHNS elemental analysis, FTIR, and GC-MS. 1,4-Dioxane showed the best performance in yielding the maximum bio-oil with 51.8% at those conditions. The higher heating values of the bio-oils ranged from 22.1 to 35 MJ/kg. Phenolic groups were the predominant components of bio-oil produced from OWP, while the intensity of alcohols, ketones, and acids varied based on used solvents. Based on energy recovery calculations, the enhancement of pristine OWP's energy efficiency depended on bio-oil yield, and quality was confirmed for all solvent types (1,4-dioxane > 1-butanol > water > ethanol).

A skin pharmacokinetics study of permeation enhancers: The root cause of dynamic enhancement effect on in vivo drug permeation

Skin pharmacokinetics (SPK) of permeation enhancers can answer the question of why enhancement effects different at the kinetic level. Herein, SPK of permeation enhancers were classified into two categories, namely, lateral elimination (elimination to surrounding stratum corneum (SC)) and longitudinal elimination (elimination to deep epidermal (EP)). They were evaluated with a specific parameter for permeation enhancers, diffusion ratio (DR_SC-EP), according to results of tissue-distribution test, molecular dynamic (MD) simulation, and confocal laser scanning microscopy (CLSM). The linear relationship between k_e-enahcer and Δ C_max-drug (R² = 0.92), MRT_enhancer and Δ T_max-drug (R² = 0.97), AUC_t-enhancer and Δ AUC_t-drug (R² = 0.90) suggesting that SPK of permeation enhancers precisely controlled dynamic process of drug permeation in vivo. The molecular mechanisms of the dynamic effect of SPK process on drug transdermal behaviors were characterized by modulated-temperature differential scanning calorimetry (MTDSC), dielectric spectroscopy, small-angle X-ray scattering (SAXS), solid-state NMR. Permeation enhancers with high molecular weight (M.W.) and high polar surface area (P.S.A.) had good compatibility and strong interaction strength with SC, leading their lateral-elimination behavior, causing their low DR_SC-EP and resulting in low k_e-enhancer, long MRT_enhancer, and large AUC_t-enhancer. Consequently, skin barrier can be rapidly opened fast and to a great extent. In summary, compared with SPK of permeation enhancers with longitudinal elimination, SPK of permeation enhancers with lateral elimination can enable more sustainable and greater drug permeation. The information about SPK of permeation enhancers offered a criterion to estimate its permeation-enhancement effect on the drug and its subsequent application in transdermal formulations.

Efficacy and safety of permeation enhancers: a kinetic evaluation approach and molecular mechanism study in the skin

This study sought to provide approach for evaluating and predicting the efficacy and safety of permeation enhancers on the basis of their kinetic distribution behavior in the skin dictated by physicochemical properties. Herein, the efficacy-safety regularity of eight permeation enhancers were studied with ex vivo skin permeation study, small-angle X-ray scattering, MTT assay, H&E staining, and in vivo skin erythema analysis, classifying into the following three categories: high enhancement-low irritation, medium enhancement-high irritation, and low enhancement-low irritation. These three modes were positively correlated with the distribution amount of permeation enhancers in the skin layers and verified by the in vitro tape-stripping study. The kinetic parameter, effective-safety index (I_ES), was proposed to describe the regularity of enhancement effect tendency and irritation risk, and the relationship between I_ES and physicochemical properties of permeation enhancers was analyzed with multiple regression analysis. According to the results of modulated temperature differential scanning calorimetry and dielectric spectrum, permeation enhancers with high lipophilicity and low polarity had I_ES > 1, suggesting high enhancement effect and low irritation due to their higher affinity with the stratum corneum (SC) than with epidermis (EP). Permeation enhancers with medium lipophilicity and medium polarity exhibited 0 <I_ES ≤ 1, showing medium enhancement effect and high irritation, as determined by their comparable affinity with the SC and epidermis (EP). However, permeation enhancers with low lipophilicity and high polarity had I_ES → 0, demonstrating low enhancement effect and irritation, as indicated by their poor affinity with the SC. In summary, different physicochemical properties of permeation enhancers influenced their affinities with skin layers, resulting in their different enhancement effect and irritation potential. This study will provide a theoretical basis and criteria for evaluating and predicting the safety and efficacy of permeation enhancers, which will enable a more rational selection of permeation enhancers in the optimization of transdermal patches.

Mechanistic insights into carbon dioxide utilization by superoxide ion generated electrochemically in ionic liquid electrolyte

Understanding the reaction mechanism that controls the one-electron electrochemical reduction of oxygen is essential for sustainable use of the superoxide ion (O2˙-) during CO2 conversion. Here, stable generation of O2˙- in butyltrimethylammonium bis(trifluoromethylsulfonyl)imide [BMAmm+][TFSI-] ionic liquid (IL) was first detected at -0.823 V vs. Ag/AgCl using cyclic voltammetry (CV). The charge transfer coefficient associated with the process was ∼0.503. It was determined that [BMAmm+][TFSI-] is a task-specific IL with a large negative isovalue surface density accrued from the [BMAmm+] cation with negatively charged C(sp2) and C(sp3). Consequently, [BMAmm+][TFSI-] is less susceptible to the nucleophilic effect of O2˙- because only 8.4% O2˙- decay was recorded from 3 h long-term stability analysis. The CV analysis also detected that O2˙- mediated CO2 conversion in [BMAmm+][TFSI-] at -0.806 V vs. Ag/AgCl as seen by the disappearance of the oxidative faradaic current of O2˙-. Electrochemical impedance spectroscopy (EIS) detected the mechanism of O2˙- generation and CO2 conversion in [BMAmm+][TFSI-] for the first time. The EIS parameters in O2 saturated [BMAmm+][TFSI-] were different from those detected in O2/CO2 saturated [BMAmm+][TFSI-] or CO2 saturated [BMAmm+][TFSI-]. This was rationalized to be due to the formation of a [BMAmm+][TFSI-] film on the GC electrode, creating a 2.031 × 10-9 μF cm-2 double-layer capacitance (CDL). Therefore, during the O2˙- generation and CO2 utilization in [BMAmm+][TFSI-], the CDL increased to 5.897 μF cm-2 and 7.763 μF cm-2, respectively. The CO2 in [BMAmm+][TFSI-] was found to be highly unlikely to be electrochemically converted due to the high charge transfer resistance of 6.86 × 1018 kΩ. Subsequently, O2˙- directly mediated the CO2 conversion through a nucleophilic addition reaction pathway. These results offer new and sustainable opportunities for utilizing CO2 by reactive oxygen species in ionic liquid media.

Accurate MP2-based force fields predict hydration free energies for simple alkanes and alcohols in good agreement with experiments

Force fields for four small molecules, methane, ethane, methanol, and ethanol, were created by force matching MP2 gradients computed with triple-zeta-quality basis sets using the Adaptive Force Matching method. Without fitting to any experimental properties, the force fields created were able to predict hydration free energies, enthalpies of hydration, and diffusion constants in excellent agreements with experiments. The root mean square error for the predicted hydration free energies is within 1 kJ/mol of experimental measurements of Ben-Naim et al. [J. Chem. Phys. 81(4), 2016-2027 (1984)]. The good prediction of hydration free energies is particularly noteworthy, as it is an important fundamental property. Similar hydration free energies of ethane relative to methane and of ethanol relative to methanol are attributed to a near cancellation of cavitation penalty and favorable contributions from dispersion and Coulombic interactions as a result of the additional methyl group.

Protein Denaturation, Zero Entropy Temperature, and the Structure of Water around Hydrophobic and Amphiphilic Solutes

The hydrophobic effect plays a key role in many chemical and biological processes, including protein folding. Nonetheless, a comprehensive picture of the effect of temperature on hydrophobic hydration and protein denaturation remains elusive. Here, we study the effect of temperature on the hydration of model hydrophobic and amphiphilic solutes, through molecular dynamics, aiming at getting insight on the singular behavior of water, concerning the zero-entropy temperature, T_S, and entropy convergence, T_S^*, also observed for some proteins, upon denaturation. We show that, similar to hydrocarbons, polar amphiphilic solutes exhibit a T_S, although strongly dependent on solute-water interactions, opposite to hydrocarbons. Further, the temperature dependence of the hydration entropy, normalized by the solvent accessible surface area, is shown to be nearly solute size independent for hydrophobic but not for amphiphilic solutes, for similar reasons. These results are further discussed in the light of information theory (IT) and the structure of water around hydrophobic groups. The latter shows that the tetrahedral enhancement of some water molecules around hydrophobic groups, associated with the reduction of water defects, leads to the strengthening of the weakest hydrogen bonds, relative to bulk water. In addition, a larger tetrahedrality is found in low density water populations, demonstrating that pure water has encoded structural information, similar to that associated with hydrophobic hydration. The reversal of the hydration entropy dependence on the solute size, above T_S^*, is also analyzed and shown to be associated with a greater loss of water molecules exhibiting enhanced orientational order, in the coordination sphere of large solutes. Finally, the source of the differences between Kauzmann's "hydrocarbon model" on protein denaturation and hydrophobic hydration is discussed, with relatively large amphiphilic hydrocarbons seemingly displaying a more similar behavior to some globular proteins than aliphatic hydrocarbons.

Temperature, Pressure, and Concentration Derivatives of Nonpolar Gas Hydration: Impact on the Heat Capacity, Temperature of Maximum Density, and Speed of Sound of Aqueous Mixtures

The hydrophobic effect is an umbrella term encompassing a number of solvation phenomena associated with solutions of nonpolar species in water, including the following: a meager solubility opposed by entropy at room temperature; large positive hydration heat capacities; positive shifts in the temperature of maximum density of aqueous mixtures; increases in the speed of sound of dilute aqueous mixtures; and negative volumes of association between interacting solutes. Here we present a molecular simulation study of nonpolar gas hydration over the temperature range 273.15-373.15 K and a pressure range -500 to 1000 bar to investigate the interrelationships between distinct hydrophobic phenomena. We develop a new free energy correlation for the solute chemical potentials founded on the Tait equation description of the equation-of-state of liquid water. This analytical correlation is shown to provide a quantitatively accurate description of nonpolar gas hydration over the entire range of thermodynamic state points simulated, with an error of ∼0.02 k_BT or lower in the fitted chemical potentials. Our simulations and the correlation accurately reproduce many of the available experimental results for the hydration of the solutes examined here. Moreover, the correlation reproduces the characteristic entropies of hydration, temperature dependence of the hydration heat capacity, perturbations in the temperature of maximum density, and changes in the speed of sound. While negative volumes of association result from pairwise interactions in solution, beyond the limits of our simulations performed at infinite dilution, we discuss how our correlation could be supplemented with second virial coefficient information to expand to finite concentrations. In total, this work demonstrates that many distinct phenomena associated with the hydrophobic effect can be captured within a single thermodynamically consistent correlation for solute hydration free energies.

Recent advances in organosolv fractionation: Towards biomass fractionation technology of the future

Organosolv treatment is among the most promising strategies for valorising lignocellulosic biomass and could facilitate the transition towards enhanced utilization of renewable feedstocks. However, issues such as inefficient solvent recycle and fractionation has to be overcome. The present review aims to address these issues and discuss the role of the components present during organosolv treatment and their influence on the overall process. Thus, the review focuses not only on how the choice of solvent and catalyst affects lignocellulosic fractionation, but also on how the choice of treatment liquor influences the possibility for solvent recycling and product isolation. Several organic solvents have been investigated in combination with water and acid/base catalysts; however, the lack of a holistic approach often compromises the performance of the different operational units. Thus, an economically viable organosolv process should optimize biomass fractionation, product isolation, and solvent recycling.