Dyedauxiliary Groups, an Emerging Approach in Organic Chemistry. The Case of Arylazo Sulfones

Water Effect on the Photochemistry of Arylazo Sulfonates

The effect of water on visible-light-driven generation of aryl radicals or aryl cations from colored shelf-stable arylazo sulfonates has been investigated. Photoinduced ionic and radical decomposition of these salts compete, depending on the media used. In organic solvents, light-induced homolysis of the N-S bond occurs, and the resulting aryl radical may be used to some extent for arylation reactions. On the contrary, in neat water, radical chemistry is prevented by an efficient photoheterolysis, and a reactive aryl cation is otherwise generated.

Versatile Metal-Free Arylation of BODIPY and Bis(BF2) Chromophores by Using Arylazosulfones in a Sunflow System

BODIPYs have a well-established role in biological sciences as chemosensors and versatile biological markers due to their chemical reactivity, which allows for fine-tuning of their photophysical characteristics. In this work, we combined the unique reactivity of arylazo sulfones with the advantages of a "sunflow" reactor to develop a fast, efficient, and versatile method for the photochemical arylation of BODIPYs and other chromophores. This approach resulted in red-shifted emitting fluorophores due to extended electronic delocalization at the 3- and 5-positions of the BODIPY core. This method represents an advantageous approach for BODIPY functionalization compared to existing strategies.

Direct C(sp3)-H functionalization with aryl and alkyl radicals as intermolecular hydrogen atom transfer (HAT) agents

Recent years have witnessed the emergence of direct intermolecular C(sp3)-H bond functionalization using in situ generated aryl/alkyl radicals as a unique class of hydrogen atom transfer (HAT) agents. A variety of precursors have been exploited to produce these radical HAT agents under photocatalytic, electrochemical or thermal conditions. To date, viable aryl radical precursors have included aryl diazonium salts or aryl azosulfones, diaryliodonium salts, O-benzoyl oximes, aryl sulfonium salts, aryl thioesters, and aryl halides; and applicable alkyl radical sources have included tetrahalogenated methanes (e.g., CCl3Br, CBr4 and CF3I), N-hydroxyphthalimide esters, alkyl bromides, and acetic acid. This review summarizes the current advances in direct intermolecular C(sp3)-H functionalization through key HAT events with in situ generated aryl/alkyl radicals and categorizes the procedures by the specific radical precursors applied. With an emphasis on the reaction conditions, mechanisms and representative substrate scopes of these protocols, this review aims to demonstrate the current trends and future challenges of this emerging field.

Covalent functionalization by using blue light activated radicals: on the reaction mechanisms of arylazo sulfone binding on graphene

Covalent functionalization of graphene presents a pivotal strategy to enhance its surface properties and overcome inherent chemical inertness. While diazonium salts have been extensively utilized for this purpose, their limitations necessitate exploration of alternative approaches. Arylazo sulfones, such as diazonium salt derivatives serving as chromophores, offer a promising solution, enabling photochemical reactions under visible light. Here, we propose a novel method for rapid covalent photofunctionalization of chemical vapor deposition (CVD) graphene on copper substrates using arylazo sulfones. The generation of aryl radicals - chlorobenzene in this case - was achieved through blue light LED irradiation of 4-chlorophenylazo methyl sulfone solution in acetonitrile. Efficient surface covalent modification of graphene was verified by observing (i) the photogeneration of radicals with a decrease in the π-π* band absorbance and an increase in the n-π* of arylazosulfone solution by UV-Vis spectroscopy; (ii) an increase in C sp3 defects on graphene from the Raman D band, the Auger C KLL signal and graphene C 1s X-ray photoelectron spectroscopy (XPS); and (iii) the presence of the chlorobenzene XPS Cl 2p signal. The aryl radical generation was enhanced by the copper substrate during irradiation, with a possible double path reaction mechanism. This approach highlights the versatility of arylazo sulfones in covalently patterning graphene surfaces, thus unlocking opportunities by overcoming the current approach consisting of the deposition of resist materials with successive cycles of lithography and electrochemistry.

Visible photons as ideal reagents for the activation of coloured organic compounds

In recent decades, the traceless nature of visible photons has been exploited for the development of efficient synthetic strategies for the photoconversion of colourless compounds, namely, photocatalysis, chromophore activation, and the formation of an electron donor/acceptor (EDA) complex. However, the use of photoreactive coloured organic compounds is the optimal strategy to boost visible photons as ideal reagents in synthetic protocols. In view of such premises, the present review aims to provide its readership with a collection of recent photochemical strategies facilitated via direct light absorption by coloured molecules. The protocols have been classified and presented according to the nature of the intermediate/excited state achieved during the transformation.

Arylazo sulfones: multifaceted photochemical reagents and beyond

The photochemical action of arylazo sulfones under visible light irradiation has recently gained considerable attention for the construction of carbon-carbon and carbon-heteroatom bonds in organic synthesis. The inherent dyedauxiliary group (-N2SO2R) embedded in the reagent is responsible for the absorption of visible light even in the absence of a photocatalyst, additive or oxidant, leading to the generation of three different radicals, viz. aryl (carbon-centred), sulfonyl (sulphur-centred) and diazenyl (nitrogen-centred) radicals, under different reaction conditions. Encountering a reagent with such a versatile behaviour is quite rare, which makes arylazo sulfones a highly interesting class of compounds. The mild reaction conditions under which these reagents can operate are an added advantage. Recently, they are also being used as non-ionic photoacid generators (PAGs), electron acceptors, and hydrogen atom transfer (HAT) and imination reagents in a number of synthetic transformations. They have displayed substantial damaging effect on the structure of DNA in the presence of light which can lead to their use as phototoxic pharmaceuticals for cancer treatment. Moreover, their photochemistry is also being exploited in polymerization reactions (as photoinitiators) and in materials chemistry (surface modification).

Visible-Light-Mediated Divergent and Regioselective Vicinal Difunctionalization of Styrenes with Arylazo Sulfones

Activated by visible light, arylazo sulfones can serve as multifaceted reactants and are employed in diazenylation, sulfonylation, and arylation reactions under (photo)catalyst-free conditions. Such versatile reactivity enabled us to develop an operationally simple, regioselective, and tunable difunctionalization of styrenes with arylazo sulfones to produce α-sulfonyl arylhydrazones and 1,2-alkoxyarylated products in moderate to excellent yields. Furthermore, such difunctionalized products have been exploited as key building blocks for the synthesis of various heterocycles.

Visible-Light-Promoted Aryl Cation Formation: Aromatic SN1 Reactions of Areneazo-2-(2-nitro)propanes

The visible light excitation of areneazo-2-(2-nitro)propane·HCl salts generated the singlet aryl cation that readily underwent aromatic SN1 reactions with a variety of nucleophiles. The in situ generated singlet aryl cation was stabilized by a counter nitronate anion that prevented other intersystem crossing and single electron transfer processes. With the improved safety features of neutral areneazo-2-(2-nitro)propane derivatives, the current visible-light-promoted aromatic SN1 reactions provide an alternative aryl Csp2-X bond forming strategy.

A General Metal-Free Protocol for the Visible-Light-Driven Protection of Carbonyls

The protection of a carbonyl is a standard procedure to mask the reactivity of this group towards nucleophiles and reductants. The present work pointed out the potentialities of arylazo sulfones as non-ionic photoacid generators (PAGs) to promote the efficient conversion of aldehydes and ketones into acetals, ketals, and 1,3-oxazolidines upon visible-light irradiation. This approach employed mild conditions and exhibited an easy scalability and a broad scope (80 examples included).

Effect of Arylazo Sulfones on DNA: Binding, Cleavage, Photocleavage, Molecular Docking Studies and Interaction with A375 Melanoma and Non-Cancer Cells

A set of arylazo sulfones, known to undergo N-S bond cleavage upon light exposure, has been synthesized, and their activity in the dark and upon irradiation towards DNA has been investigated. Their interaction with calf-thymus DNA has been examined, and the significant affinity observed (most probably due to DNA intercalation) was analyzed by means of molecular docking "in silico" calculations that pointed out polar contacts, mainly via the sulfonyl moiety. Incubation with plasmid pBluescript KS II revealed DNA cleavage that has been studied over time and concentration. UV-A irradiation considerably improved DNA damage for most of the compounds, whereas under visible light the effect was slightly lower. Moving to in vitro experiments, irradiation was found to slightly enhance the death of the cells in the majority of the compounds. Naphthylazosulfone 1 showed photo-disruptive effect under UV-A irradiation (IC50 ~13 μΜ) followed by derivatives 14 and 17 (IC50 ~100 μΜ). Those compounds were irradiated in the presence of two non-cancer cell lines and were found equally toxic only upon irradiation and not in the dark. The temporal and spatial control of light, therefore, might provide a chance for these novel scaffolds to be useful for the development of phototoxic pharmaceuticals.

Friedel-Crafts arylation of aldehydes with indoles utilizing arylazo sulfones as the photoacid generator

A versatile, inexpensive and sustainable protocol for the preparation of valuable bis-indolyl methanes via visible light-mediated, metal-free Friedel-Crafts arylation has been developed. The procedure, that exploits the peculiar behavior of arylazo sulfones as non-ionic photoacid generators (PAGs), was applied to the conversion of a variety of aliphatic and aromatic aldehydes into diarylmethanes in good to highly satisfactory yields, employing a low-catalyst loading (0.5 mol%) and irradiation at 456 nm.

Visible-Light-Driven Solventylation Strategy for Olefin Functionalization

Amphiphilic aryl radicals generated upon visible light irradiation of arylazo sulfones have been exploited in the development of a solventylation strategy via hydrogen atom transfer (HAT). The present protocol succeeded in the versatile functionalization of various olefins with carbon-centered radicals deriving from acetone, acetonitrile, chloroform, methylene chloride, nitromethane, methyl acetate, and methyl formate under metal- and photocatalyst-free conditions. The direct addition of the aryl radicals onto the olefin substrates was suppressed under high dilution conditions.

Recent Advances in Light-Induced Selenylation

Selenium-containing organic molecules have recently found a plethora of applications, ranging from organic synthesis to pharmacology and material sciences. In view of these concepts, the development of mild, efficient, and general protocols for the formation of C-Se bonds is desirable, and light induced approaches are appealing ways. The aim of this Review is to provide the reader with the most recent examples of light promoted selenylation processes.

Blue LED-Mediated Syntheses of Arylazo Phosphine Oxides and Phosphonates via N-P Bond Formation

The synthesis of (E)-diphenyl(aryldiazenyl)phosphine oxides and dialkyl (E)-(aryldiazenyl)phosphonates via visible light-mediated N-P bond formation between diazo species and phosphine oxides and phosphite derivatives, respectively, is described. The diazo species were generated via the reaction of aniline with isoamyl nitrite, which upon reaction with phosphorus surrogates generated arylazophosphine oxides and arylazo phosphonates in good to excellent yields. This sustainable chemical process offers a broad substrate scope and reasonably viable product formation.

Arylazo Sulfones as Nonionic Visible-Light Photoacid Generators

The selective visible-light-driven generation of a weak acid (sulfinic acid, in nitrogen-purged solutions) or a strong acid (sulfonic acid, in oxygen-purged solutions) by using shelf-stable arylazo sulfones was developed. These sulfones were then used for the green, smooth, and efficient photochemical catalytic protection of several (substituted) alcohols (and phenols) as tetrahydropyranyl ethers or acetals.

Application of CFD Numerical Simulation Image Imaging Technology in the Study of Droplet Microfluidic Multiphase Flow Characteristics

In order to study the problem that the flow in the internal channel of the microfluidic chip is different from that of the macroscopic system by the FD numerical simulation image imaging technology. Taking the liquid-liquid extraction of microfluidic chip as the research object, this paper analyzes the theoretical basis, working principle, structural parameters, and the influence of working parameters on the fluid flow of liquid-liquid extraction. The results are as follows: when the inlet velocity of flowing liquid is 10^{^(-5)} m/s, the diffusion efficiency can still be maintained at 95%; the double ψ-type aqueous phase showed laminar flow, the two-phase contact interface increased compared with the bottom flow rate, and the extraction efficiency increased to 98%; the extraction efficiency of double ψ type is higher than that of double Y-type: when the flow velocity ratio increases from v _aq : v _oil=1 : 2 to v _aq : v _oil=5 : 1, the extraction efficiency increases to 99.8%; the experimental extraction efficiency is compared with the diffusion efficiency simulated by simulation. The diffusion efficiency of the cross type is 1.05 times that of the extraction efficiency, and that of the cylindrical type is 1.04 times that of the extraction efficiency. In this study, CFD is used to simulate the characteristics of droplet microfluidic multiphase flow, which enriches the theoretical method and research experience of liquid-liquid laminar flow.

Visible-light-induced one-pot synthesis of sulfonic esters via multicomponent reaction of arylazo sulfones and alcohols

Sulfonic ester is a chemical structure common to many organic molecules, including biologically active compounds. Herein, a visible-light-induced synthetic method to prepare aryl sulfonic ester from arylazo sulfones was developed. In the present study, a one-pot reaction was carried out using arylazo sulfones, DABSO (DABCO·(SO2)2), and alcohols in the presence of CuI as a coupling catalyst and HCl as an additive to yield sulfonic esters via multicomponent reaction. This synthetic method afforded a wide range of sulfonic esters with high yields under mild conditions.

Visible Light-Driven, Gold(I)-Catalyzed Preparation of Symmetrical (Hetero)biaryls by Homocoupling of Arylazo Sulfones

The preparation of symmetrical (hetero)biaryls via arylazo sulfones has been successfully carried out upon visible light irradiation in the presence of PPh3AuCl as the catalyst. The present protocol led to the efficient synthesis of a wide range of target compounds in an organic-aqueous solvent under photocatalyst-free conditions.

Dyedauxiliary Group Strategy for the α-Functionalization of Ketones and Esters

The synthesis of α-arylketones and α-arylazo esters has been achieved in mixed organic-aqueous media under photocatalyst- and metal-free conditions via visible light activation of arylazo sulfones in the presence of enol silyl ethers and ketene silyl acetals, respectively. The process took place efficiently and exhibits an excellent tolerance for a broad variety of functional groups.

A photocatalyst-free visible-light-mediated solvent-switchable route to stilbenes/vinyl sulfones from β-nitrostyrenes and arylazo sulfones

Photocatalyst-free visible-light-mediated reactions, based on the presence of a visible-light-absorbing functional group in the starting material itself in order to exclude the often costly, hazardous, degradable and difficult to remove or recover photoredox catalysts, have been gaining momentum recently. We have employed this approach to develop a denitrative photocatalyst-free visible-light-mediated protocol for the arylation/sulfonylation of β-nitrostyrenes employing arylazo sulfones (bench-stable photolabile compounds) in a switchable solvent-controlled manner. Arylazo sulfones served as the aryl and sulfonyl radical precursors under blue LED irradiation for the synthesis of trans-stilbenes and (E)-vinyl sulfones in CH3CN and dioxane/H2O 2 : 1, respectively. The absence of any metal, photocatalyst and additive; excellent selectivity (E-stereochemistry) and solvent-switchability; and the use of visible light and ambient temperature are the prime assets of the developed method. Moreover, we report the first photocatalyst-free visible light-driven route to synthesize stilbenes and vinyl sulfones from readily available β-nitrostyrenes.

Blue light driven free-radical polymerization using arylazo sulfones as initiators

The polymerization of a broad range of electron-poor olefins has been achieved under free-radical conditions by using arylazo sulfones as visible light photoinitiators.

Metal-Free Trifluoromethylthiolation of Arylazo Sulfones

A visible-light-driven protocol for the synthesis of aryl trifluoromethyl thioethers under photocatalyst- and metal-free conditions has been pursued. The procedure exploits the peculiar properties of arylazo sulfones (having electron-rich or electron-poor substituents on the (hetero)aromatic ring) as photochemical precursors of aryl radicals and S-trifluoromethyl arylsulfonothioates as easy-to-handle trifluoromethylthiolating agents.

Metal-free synthesis of biarenes via photoextrusion in di(tri)aryl phosphates

A metal-free route for the synthesis of biarenes has been developed. The approach is based on the photoextrusion of a phosphate moiety occurring upon irradiation of biaryl- and triaryl phosphates. The reaction involves an exciplex as the intermediate and it is especially suitable for the preparation of electron-rich biarenes.