Properties of Poloxamer Molecules and Poloxamer Micelles Dissolved in Water and Next to Lipid Bilayers: Results from Computer Simulations

Newly Developed Di-Block Copolymer-Based Cell Membrane Stabilizers Protect Mouse Coronary Artery Endothelial Cells against Hypoxia/Reoxygenation Injury

Reperfusion after ischemia causes additional cellular damage, known as reperfusion injury, for which there is still no effective remedy. Poloxamer (P)188, a tri-block copolymer-based cell membrane stabilizer (CCMS), has been shown to provide protection against hypoxia/reoxygenation (HR) injury in various models by reducing membrane leakage and apoptosis and improving mitochondrial function. Interestingly, substituting one of its hydrophilic poly-ethylene oxide (PEO) blocks with a (t)ert-butyl terminus added to the hydrophobic poly-propylene oxide (PPO) block yields a di-block compound (PEO-PPOt) that interacts better with the cell membrane lipid bi-layer and exhibits greater cellular protection than the gold standard tri-block P188 (PEO75-PPO30-PEO75). For this study, we custom-made three different new di-blocks (PEO113-PPO10t, PEO226-PPO18t and PEO113-PPO20t) to systemically examine the effects of the length of each polymer block on cellular protection in comparison to P188. Cellular protection was assessed by cell viability, lactate dehydrogenase release, and uptake of FM1-43 in mouse artery endothelial cells (ECs) following HR injury. We found that di-block CCMS were able to provide the same or better EC protection than P188. Our study provides the first direct evidence that custom-made di-block CCMS can be superior to P188 in improving EC membrane protection, raising their potential in treating cardiac reperfusion injury.

Nanolipogel Loaded with Tea Tree Oil for the Management of Burn: GC-MS Analysis, In Vitro and In Vivo Evaluation

The GC-MS analysis of tea tree oil (TTO) revealed 38 volatile components with sesquiterpene hydrocarbons (43.56%) and alcohols (41.03%) as major detected classes. TTO efficacy is masked by its hydrophobicity; nanoencapsulation can address this drawback. The results showed that TTO-loaded solid lipid nanoparticles (SLN1), composed of glyceryl monostearate (2% w/w) and Poloxamer188 (5% w/w), was spherical in shape with a core-shell microstructure. TTO-SLN1 showed a high entrapment efficiency (96.26 ± 2.3%), small particle size (235.0 ± 20.4 nm), low polydispersity index (0.31 ± 0.01), and high negative Zeta potential (−32 mV). Moreover, it exhibited a faster active agent release (almost complete within 4 h) compared to other formulated TTO-SLNs as well as the plain oil. TTO-SLN1 was then incorporated into cellulose nanofibers gel, isolated from sugarcane bagasse, to form the ‘TTO-loaded nanolipogel’ which had a shear-thinning behavior. Second-degree thermal injuries were induced in Wistar rats, then the burned skin areas were treated daily for 7 days with the TTO-loaded nanolipogel compared to the unmedicated nanolipogel, the TTO-loaded conventional gel, and the normal saline (control). The measurement of burn contraction proved that TTO-loaded nanolipogel exhibited a significantly accelerated skin healing, this was confirmed by histopathological examination as well as quantitative assessment of inflammatory infiltrate. This study highlighted the success of the proposed nanotechnology approach in improving the efficacy of TTO used for the repair of skin damage induced by burns.

Insights into the Phase Diagram of Pluronic L64 Using Coarse-Grained Molecular Dynamics Simulations

We investigate the concentration-dependent phase diagram of pluronic L64 in aqueous media at 300 and 320 K using coarse-grained (CG) molecular dynamics (MD) simulations. The CG model is derived by adapting the Martini model for nonbonded interactions along with the Boltzmann inversion (BI) of bonded interactions from all-atom (AA) simulations. Our derived CG model successfully captures the experimentally observed micellar-, hexagonal-, lamellar-, and polymer-rich solution phase. The end-to-end distance reveals the conformational change from an open-chain structure in the micellar phase to a folded-chain structure in the lamellar phase, increasing the orientational order. An increase in temperature leads to expulsion of water molecules from the L64 moiety, suggesting an increase in L64 hydrophobicity. Thermodynamic analysis using the two-phase thermodynamics (2PT) method suggests the entropy of the system decreases with increasing L64 concentration and the decrease in free energy (F) with temperature is mainly driven by the entropic factor (-TS). Further, the increase in aggregation number at lower concentrations and self-assembly at very high concentrations is energetically driven, whereas the change from the micellar phase to the lamellar phase with increasing L64 concentration is entropically driven. Our model provides molecular insights into L64 phases which can be further explored to design functionality-based suprastructures for drug delivery and tissue engineering applications.

Synthesis and Micellization of Bottlebrush Poloxamers

Bottlebrush polymers are characterized by an expansive parameter space, including graft length and spacing along the backbone, and these features impact various structural and physical properties such as molecular diffusion and bulk viscosity. In this work, we report a synthetic strategy for making grafted block polymers with poly(propylene oxide) and poly(ethylene oxide) side chains, bottlebrush analogues of poloxamers. Combined anionic and sequential ring-opening metathesis polymerization yielded low dispersity polymers, at full conversion of the macromonomers, with control over graft length, graft end-groups, and overall molecular weight. A set of bottlebrush poloxamers (BBPs), with identical graft lengths and composition, was synthesized over a range of molecular weights. Dynamic light scattering and transmission electron microscopy were used to characterize micelle formation in aqueous buffer. The critical micelle concentration scales exponentially with overall molecular weight for both linear and bottlebrush poloxamers; however, the bottlebrush architecture shifts micelle formation to a much higher concentration at a comparable molecular weight. Consequently, BBPs can exist in solution as unimers at significantly higher molecular weights and concentrations than the linear analogues.

Enhancing the Stabilization Potential of Lyophilization for Extracellular Vesicles

Extracellular vesicles (EV) are an emerging technology as immune therapeutics and drug delivery vehicles. However, EVs are usually stored at -80 °C which limits potential clinical applicability. Freeze-drying of EVs striving for long-term stable formulations is therefore studied. The most appropriate formulation parameters are identified in freeze-thawing studies with two different EV types. After a freeze-drying feasibility study, four lyophilized EV formulations are tested for storage stability for up to 6 months. Freeze-thawing studies revealed improved colloidal EV stability in presence of sucrose or potassium phosphate buffer instead of sodium phosphate buffer or phosphate-buffered saline. Less aggregation and/or vesicle fusion occurred at neutral pH compared to slightly acidic or alkaline pH. EVs colloidal stability can be most effectively preserved by addition of low amounts of poloxamer 188. Polyvinyl pyrrolidone failed to preserve EVs upon freeze-drying. Particle size and concentration of EVs are retained over 6 months at 40 °C in lyophilizates containing 10 mm K- or Na-phosphate buffer, 0.02% poloxamer 188, and 5% sucrose. The biological activity of associated beta-glucuronidase is maintained for 1 month, but decreased after 6 months. Here optimized parameters for lyophilization of EVs that contribute to generate long-term stable EV formulations are presented.

Temperature-Transferable Coarse-Grained Model for Poly(propylene oxide) to Study Thermo-Responsive Behavior of Triblock Copolymers

Thermo-responsive behavior of ethylene oxide (EO)-propylene oxide (PO) copolymers makes them suitable for many potential applications. Reproducing the origins of the tunable properties of EO-PO copolymers using coarse-grained (CG) models such as the MARTINI force field is critically important for building a better understanding of their behavior. In the present work, we have investigated the effects of coarse-graining on the water-polymer interaction across a temperature range. We compared the performance of different all-atom force fields to find the most appropriate one for the purpose of PO block parameterization in the MARTINI platform. We parameterized a CG temperature-dependent PO model based on the reproduction of the atomistic free energy of transfer of propylene oxide trimer from octane to water over a range of temperatures (20-60 °C) and compared the atomistic bond and angle distributions. Then, we used the model to study the effects of EO/PO ratio, molecular weight, and concentration on the thermo-responsive behavior of EO-PO copolymers in water. The results show an excellent agreement with experiments in different areas. Our temperature-dependent model reproduces (1) micellar phase above critical micelle temperature (CMT) and unimer phase below CMT for different Pluronics (a class of EO-PO triblock copolymers) spanning many EO/PO ratios and molecular weights; (2) spherical-to-rodlike micellar shape transition for Pluronics with 60 wt % of PO content or more; (3) diffusion coefficients for Pluronics with high PO content (P104 Pluronic with a PO mass of 3500 g mol^-1) across a broad range of temperatures; and (4) micelle core size and micelle diameter similar to experimental results. Overall, our model improves the temperature sensitivity of EO-PO copolymers of existing models significantly, particularly for copolymers that are dominated by PO agents.

Oral administration of buparvaquone nanostructured lipid carrier enables in vivo activity against Leishmania infantum

Leishmaniasis, a neglected tropical disease, is prevalent in 98 countries with the occurrence of 1.3 million new cases annually. The conventional therapy for visceral leishmaniasis requires hospitalization due to the severe adverse effects of the drugs, which are administered parenterally. Buparvaquone (BPQ) showed in vitro activity against leishmania parasites; nevertheless, it has failed in vivo tests due to its low aqueous solubility. Though, lipid nanoparticles can overcome this holdback. In this study we tested the hypothesis whether BPQ-NLC shows in vivo activity against L. infantum. Two optimized formulations were prepared (V1: 173.9 ± 1.6 nm, 0.5 mg of BPQ/mL; V2: 232.4 ± 1.6 nm, 1.3 mg of BPQ/mL), both showed increased solubility up to 73.00-fold, and dissolution up to 83.29%, while for the free drug it was only 2.89%. Cytotoxicity test showed their biocompatibility (CC50 >554.4 µM). Besides, the V1 dose of 0.3 mg/kg/day for 10 days reduced the parasite burden in 83.4% ±18.2% (p <0.05) in the liver. BPQ-NLC showed similar leishmanicidal activity compared to miltefosine. Therefore, BPQ-NLC is a promising addition to the limited therapeutic arsenal suitable for leishmaniasis oral administration treatment.

Small-volume extensional rheology of concentrated protein and protein-excipient solutions

Limited studies measure extensional rheology in protein solutions due to volume constraints and measurement challenges. We developed a small-volume, dripping-onto-substrate (DoS) extensional rheology device to measure the capillary thinning of protein and protein-excipient solutions via DoS for the first time. Ovalbumin (OVA) was used as a model system, examined via DoS both with and without excipient poloxamer 188 (P188). Water and dilute OVA break apart rapidly and demonstrate inertiocapillary (IC) thinning behavior, where longer breakup times in OVA can be attributed to lower surface tension. Further increasing OVA content leads to longer breakup times and deviations from IC thinning at the start of thinning, however, no evidence of elastic behavior is observed. P188 more effectively lowers the droplet surface tension than OVA, transitioning from IC behavior in dilute solution to weakly elastic behavior at higher concentrations. Combined protein/excipient formulations act synergistically at low concentrations, where breakup times are identical to those of the individual components despite the higher total concentration. However concentrated protein/excipient formulations exhibit elasticity, where extensional rheology parameters depend on P188 content and total concentration. These findings imply that excipients intended to stabilize proteins in shear flow can cause undesirable behavior in extensional flows like injection.

Poloxamer 188 Exerts Direct Protective Effects on Mouse Brain Microvascular Endothelial Cells in an In Vitro Traumatic Brain Injury Model

Traumatic Brain Injury (TBI), the main contributor to morbidity and mortality worldwide, can disrupt the cell membrane integrity of the vascular endothelial system, endangering blood-brain barrier function and threatening cellular subsistence. Protection of the vascular endothelial system might enhance clinical outcomes after TBI. Poloxamer 188 (P188) has been shown to improve neuronal function after ischemia/reperfusion (I/R) injury as well as after TBI. We aimed to establish an in vitro compression-type TBI model, comparing mild-to-moderate and severe injury, to observe the direct effects of P188 on Mouse Brain Microvascular Endothelial Cells (MBEC). Confluent MBEC were exposed to normoxic or hypoxic conditions for either 5 or 15 h (hours). 1 h compression was added, and P188 was administered during 2 h reoxygenation. A direct effect of P188 on MBEC was tested by assessing cell number/viability, cytotoxicity/membrane damage, metabolic activity, and total nitric oxide production (tNOp). While P188 enhanced cell number/viability, metabolic activity, and tNOp, an increase in cytotoxicity/membrane damage after mild-to-moderate injury was prevented. In severely injured MBEC, P188 improved metabolic activity only. P188, present during reoxygenation, influenced MBEC function directly in simulated I/R and compression-type TBI.

"Plurethosome" as Vesicular System for Cutaneous Administration of Mangiferin: Formulative Study and 3D Skin Tissue Evaluation

Human skin is dramatically exposed to toxic pollutants such as ozone. To counteract the skin disorders induced by the air pollution, natural antioxidants such as mangiferin could be employed. A formulative study for the development of vesicular systems for mangiferin based on phosphatidylcholine and the block copolymer pluronic is described. Plurethosomes were designed for mangiferin transdermal administration and compared to ethosome and transethosome. Particularly, the effect of vesicle composition was investigated on size distribution, inner and outer morphology by photon correlation spectroscopy, small angle X-ray diffraction, and transmission electron microscopy. The potential of selected formulations as vehicles for mangiferin was studied, evaluating encapsulation efficiency and in vitro diffusion parameters by Franz cells. The mangiferin antioxidant capacity was verified by the 2,2-diphenyl-1-picrylhydrazyl assay. Vesicle size spanned between 200 and 550 nm, being influenced by phosphatidylcholine concentration and by the presence of polysorbate or pluronic. The vesicle supramolecular structure was multilamellar in the case of ethosome or plurethosome and unilamellar in the case of transethosome. A linear diffusion of mangiferin in the case of ethosome and transethosomes and a biphasic profile in the case of plurethosomes indicated the capability of multilamellar vesicles to retain the drug more efficaciously than the unilamellar ones. The antioxidant and anti-inflammatory potential effect of mangiferin against pollutants was evaluated on 3D human skin models exposed to O₃. The protective effect exerted by plurethosomes and transethosomes suggests their possible application to enhance the cutaneous antioxidant defense status.

Current Developments in Native Nanometric Discoidal Membrane Bilayer Formed by Amphipathic Polymers

Unlike cytosolic proteins, membrane proteins (MPs) are embedded within the plasma membrane and the lipid bilayer of intracellular organelles. MPs serve in various cellular processes and account for over 65% of the current drug targets. The development of membrane mimetic systems such as bicelles, short synthetic polymers or amphipols, and membrane scaffold proteins (MSP)-based nanodiscs has facilitated the accommodation of synthetic lipids to stabilize MPs, yet the preparation of these membrane mimetics remains detergent-dependent. Bio-inspired synthetic polymers present an invaluable tool for excision and liberation of superstructures of MPs and their surrounding annular lipid bilayer in the nanometric discoidal assemblies. In this article, we discuss the significance of self-assembling process in design of biomimetic systems, review development of multiple series of amphipathic polymers and the significance of these polymeric "belts" in biomedical research in particular in unraveling the structures, dynamics and functions of several high-value membrane protein targets.

The Martini Model in Materials Science

The Martini model, a coarse-grained force field initially developed with biomolecular simulations in mind, has found an increasing number of applications in the field of soft materials science. The model's underlying building block principle does not pose restrictions on its application beyond biomolecular systems. Here, the main applications to date of the Martini model in materials science are highlighted, and a perspective for the future developments in this field is given, particularly in light of recent developments such as the new version of the model, Martini 3.

Nanostructured Surface Finishing and Coatings: Functional Properties and Applications

This review presents current literature on different nanocomposite coatings and surface finishing for textiles, and in particular this study has focused on smart materials, drug-delivery systems, industrial, antifouling and nano/ultrafiltration membrane coatings. Each of these nanostructured coatings shows interesting properties for different fields of application. In this review, particular attention is paid to the synthesis and the consequent physico-chemical characteristics of each coating and, therefore, to the different parameters that influence the substrate deposition process. Several techniques used in the characterization of these surface finishing coatings were also described. In this review the sol-gel method for preparing stimuli-responsive coatings as smart sensor materials is described; polymers and nanoparticles sensitive to pH, temperature, phase, light and biomolecules are also treated; nanomaterials based on phosphorus, borates, hydroxy carbonates and silicones are used and described as flame-retardant coatings; organic/inorganic hybrid sol-gel coatings for industrial applications are illustrated; carbon nanotubes, metallic oxides and polymers are employed for nano/ultrafiltration membranes and antifouling coatings. Research institutes and industries have collaborated in the advancement of nanotechnology by optimizing conversion processes of conventional materials into coatings with new functionalities for intelligent applications.

Evaluation of In Vitro Neuronal Protection by Postconditioning with Poloxamer 188 Following Simulated Traumatic Brain Injury

Traumatic brain injury (TBI) leads to morbidity and mortality worldwide. Reperfusion after ischemia adds detrimental injury to cells. Ischemia/reperfusion (I/R) injures cells in a variety of ways including cell membrane disruption. Hence, methods to improve endogenous membrane resealing capacity are crucial. Poloxamer (P) 188, an amphiphilic triblock copolymer, was found to be effective against I/R and mechanical injury in various experimental settings. The aim of this study was to establish an in vitro mouse neuronal TBI model and, further, to investigate if postconditioning with P188 directly interacts with neurons after compression and simulated I/R injury, when administered at the start of reoxygenation. Cellular function was assessed by cell number/viability, mitochondrial viability, membrane damage by lactated dehydrogenase (LDH) release and FM1-43 incorporation as well as apoptosis-activation by Caspase 3. Five hours hypoxia ± compression with 2 h reoxygenation proved to be a suitable model for TBI. Compared to normoxic cells not exposed to compression, cell number and mitochondrial viability decreased, whereas membrane injury by LDH release/FM1-43 dye incorporation and Caspase 3 activity increased in cells exposed to hypoxic conditions with compression followed by reoxygenation. P188 did not protect neurons from simulated I/R and/or compression injury. Future research is indicated.

Molecular Simulation and Statistical Learning Methods toward Predicting Drug-Polymer Amorphous Solid Dispersion Miscibility, Stability, and Formulation Design

Amorphous solid dispersions (ASDs) have emerged as widespread formulations for drug delivery of poorly soluble active pharmaceutical ingredients (APIs). Predicting the API solubility with various carriers in the API-carrier mixture and the principal API-carrier non-bonding interactions are critical factors for rational drug development and formulation decisions. Experimental determination of these interactions, solubility, and dissolution mechanisms is time-consuming, costly, and reliant on trial and error. To that end, molecular modeling has been applied to simulate ASD properties and mechanisms. Quantum mechanical methods elucidate the strength of API-carrier non-bonding interactions, while molecular dynamics simulations model and predict ASD physical stability, solubility, and dissolution mechanisms. Statistical learning models have been recently applied to the prediction of a variety of drug formulation properties and show immense potential for continued application in the understanding and prediction of ASD solubility. Continued theoretical progress and computational applications will accelerate lead compound development before clinical trials. This article reviews in silico research for the rational formulation design of low-solubility drugs. Pertinent theoretical groundwork is presented, modeling applications and limitations are discussed, and the prospective clinical benefits of accelerated ASD formulation are envisioned.

Poloxamer 188 Protects Isolated Adult Mouse Cardiomyocytes from Reoxygenation Injury

Reperfusion injury is a complex pathological event involving processes that can lead to further disruption of the cell membrane and function following an ischemic event. Return of blood flow allows for the needed reperfusion; however, for a period of time before remaining viable cells stabilize, reperfusion results in additional cellular injury. In cardiomyocytes, loss of membrane integrity allows abnormal influx of extracellular calcium, leading to hyper-contracture and cell death. Methods to improve the membrane integrity of cardiomyocytes overwhelmed by pathological disruptions, such as reperfusion injury, are needed to prevent cell death, because of the myocardium's limited ability to regenerate. Research has shown administration of the copolymer P(oloxamer) 188 before ischemia/reperfusion can protect cardiomyocytes through membrane stabilization. This study sought to determine whether the administration of P188 at the beginning of the clinically more relevant time of reperfusion after ischemia will attenuate any additional damage to cardiomyocytes by stabilizing membrane integrity to allow the cells to maintain function. Using an in-vitro cardiomyocyte model subjected to hypoxia/reoxygenation to simulate ischemia/reperfusion injury, we show that reoxygenation significantly potentiates the injury caused by hypoxia itself. P188, with its unique combination of hydrophobic and hydrophilic chemical properties, and only delivered at the beginning of reoxygenation, dose-dependently protected cardiomyocytes from injury due to reoxygenation by repairing cell membranes, decreasing calcium influx, and maintaining cellular morphology. Our study also shows the hydrophobic portion of P188 is necessary for the stabilization of cell membrane integrity in providing protection to cardiomyocytes against reoxygenation injury.

The coarse-grained models of poly(ethylene oxide) and poly(propylene oxide) homopolymers and poloxamers in big multipole water (BMW) and MARTINI frameworks

Polyethylene oxide (PEO) and poly(propylene oxide) (PPO), especially their tri-block copolymers PEO-PPO-PEO (poloxamers), have a broad range of applications in biotechnology and medical science. Understanding their specific interactions with biomembranes is the key to unveil the unique features of poloxamers either as membrane-healing or membrane pore-forming agents. Based on the coarse-graining convention of the MARTINI force field and the big multipole water (BMW) model, which has a three charged site topology and can reproduce the correct dipole moment of four-water clusters, we generated coarse-grained (CG) models with analytical and numerical potentials for PEO and PPO homopolymers and poloxamers in dilute solution. The effective bonded interaction potentials between CG beads were determined from the probability distributions of bond lengths, angles and dihedrals that are determined from atomistic simulations. The nonbonded interaction parameters were fine-tuned to reproduce the conformational properties of atomistic PEO and PPO homopolymers and poloxamers via extensive CG simulations of PEO and PPO homopolymers and poloxamers in a BMW water environment. The reported CG models provide a promising framework for a comprehensive understanding of the microstructural, conformational, and dynamic properties of poloxamers and their delicate interactions with other species in an explicit water environment.

Membrane stabilizer Poloxamer 188 improves yield of primary isolated rat cardiomyocytes without impairing function

Intact cardiomyocytes are used to investigate cardiac contractility and evaluate the efficacy of new therapeutic compounds. Primary enzymatic isolation of adult rodent cardiomyocytes has limitations, including low cardiomyocyte survival, which is likely due to ischemic conditions and/or membrane damage. The addition of Poloxamer 188 (P188) has been used to reduce ischemia‐ and membrane‐related damage in ischemia–reperfusion and muscular dystrophy studies. P188 stabilizes membranes, reducing cell death. Cardiomyocytes were isolated from rats, under three conditions: (1) using standard isolation solutions, (2) with P188 added during cannulation (ischemic event), and (3) with P188 added during cannulation, enzymatic digestion, and trituration. Cell survival was assessed by quantifying the number of rod‐shaped versus contracted cells on the day of isolation and up to 3 days post‐isolation. Adding P188 only during cannulation yielded improved survival on the day of isolation. Little difference in survival was seen among the three conditions in the days post‐isolation. Cardiomyocyte function was assessed by measuring calcium transients and unloaded sarcomere lengths for up to 2 days post‐isolation. P188 did not consistently alter calcium handling or sarcomere shortening in the isolated cardiomyocytes. We conclude that the addition of P188 to the cannulation (e.g., wash) of the isolated heart may improve initial survival of cardiomyocytes upon primary enzymatic isolation.

Complex Polysaccharide-Based Nanocomposites for Oral Insulin Delivery

Polyelectrolyte nanocomposites rarely reach a stable state and aggregation often occurs. Here, we report the synthesis of nanocomposites for the oral delivery of insulin composed of alginate, dextran sulfate, poly-(ethylene glycol) 4000, poloxamer 188, chitosan, and bovine serum albumin. The nanocomposites were obtained by Ca²⁺-induced gelation of alginate followed by an electrostatic-interaction process among the polyelectrolytes. Chitosan seemed to be essential for the final size of the nanocomposites and there was an optimal content that led to the synthesis of nanocomposites of 400–600 nm hydrodynamic size. The enhanced stability of the synthesized nanocomposites was assessed with LUMiSizer after synthesis. Nanocomposite stability over time and under variations of ionic strength and pH were assessed with dynamic light scattering. The rounded shapes of nanocomposites were confirmed by scanning electron microscopy. After loading with insulin, analysis by HPLC revealed complete drug release under physiologically simulated conditions.

Structural behavior of amphiphilic polyion complexes interacting with saturated lipid membranes investigated by coarse-grained molecular dynamic simulations

Neutral polyelectrolyte complexes (PECs) made from an amphiphilic multiblock copolymer of type (A_nB_n)_m and an oppositely charged polyion and interacting with a dipalmitoylphosphatidylcholine (DPPC) lipid membrane.

Micellization of Pluronic P123 in Water/Ethanol/Turpentine Oil Mixed Solvents: Hybrid Particle-Field Molecular Dynamic Simulation

The hybrid particle–field molecular dynamics simulation method (MD-SCF) was applied to study the self-assembly of Pluronic PEO₂₀-PPO₇₀-PEO₂₀ (P123) in water/ethanol/turpentine oil- mixed solvents. In particular, the micellization process of P123 at low concentration (less than 20%) in water/ethanol/turpentine oil-mixed solvents was investigated. The aggregation number, radius of gyration, and radial density profiles were calculated and compared with experimental data to characterize the structures of the micelles self-assembled from P123 in the mixed solvent. This study confirms that the larger-sized micelles are formed in the presence of ethanol, in addition to the turpentine oil-swollen micelles. Furthermore, the spherical micelles and vesicles were both observed in the self-assembly of P123 in the water/ethanol/turpentine oil-mixed solvent. The results of this work aid the understanding of the influence of ethanol and oil on P123 micellization, which will help with the design of effective copolymer-based formulations.

Evaluation of polyvinylpyrrolidone and block copolymer micelle encapsulation of serine chlorin e6 and chlorin e4 on their reactivity towards albumin and transferrin and their cell uptake

Encapsulation of porphyrinic photosensitizers (PSs) into polymeric carriers plays an important role in enhancing their efficiency as drugs in photodynamic therapy (PDT). Porphyrin aggregation and low solubility as well as the preservation of the advantageous photophysical properties pose a challenge on the design of efficient PS-carrier systems. Block copolymer micelles (BCMs) and polyvinylpyrrolidone (PVP) are promising drug delivery vehicles for physical entrapment of PSs. BCMs exhibit enhanced dynamics as compared to the less flexible PVP network. In the current work the question is addressed how these different dynamics affect PS encapsulation, release from the carrier, reaction with serum proteins, and cellular uptake. The porphyrinic compounds serine-amide of chlorin e6 (SerCE) and chlorin e4 (CE4) were used as model PSs with different lipophilicity and aggregation properties. ¹H NMR and fluorescence spectroscopy were applied to study their interactions with PVP and BCMs consisting of Kolliphor P188 (KP). Both chlorins were well encapsulated by the carriers and had improved photophysical properties. Compared to SerCE, the more lipophilic CE4 exhibited stronger hydrophobic interactions with the BCM core, stabilizing the system and preventing exchange with the surrounding medium as was shown by NMR NOESY and DOSY experiments. PVP and BCMs protected the encapsulated chlorins against interaction with human transferrin (Tf). However, SerCE and CE4 were released from BCMs in favor of binding to human serum albumin (HSA) while PVP prevented interaction with HSA. Fluorescence spectroscopic studies revealed that HSA binds to the surface of PVP forming a protein corona. PVP and BCMs reduced cellular uptake of the chlorins. However, encapsulation into BCMs resulted in more efficient cell internalization for CE4 than for SerCE. HSA significantly lowered both, free and carrier-mediated cell uptake for CE4 and SerCE. In conclusion, PVP appears as the more universal delivery system covering a broad range of host molecules with respect to polarity, whereas BCMs require a higher drug-carrier compatibility. Poorly soluble hydrophobic PSs benefit stronger from BCM-type carriers due to enhanced bioavailability through disaggregation and solubilization allowing for more efficient cell uptake. In addition, increased PS-carrier hydrophobic interactions have a stabilizing effect. For more hydrophilic PSs, the main advantage of polymeric carriers like PVP or poloxamer micelles lies in their protection during the transport through the bloodstream. HSA binding plays an important role for drug release and cell uptake in carrier-mediated delivery to the target tissue.

Molecular mechanism of HIV-1 TAT peptide and its conjugated gold nanoparticles translocating across lipid membranes

The trans-acting activator of transcription (TAT) peptide, which is derived from human immunodeficiency virus-1 (HIV-1), has been widely used as an effective nanocarrier to transport extracellular substances into cells. However, the underlying translocation mechanism of TAT peptide across cell membranes still remains controversial. Besides, the molecular process of TAT peptide facilitating the transport of extracellular substances into cells is largely unknown. In this study, we explore the interactions of TAT peptides and their conjugated gold nanoparticles with lipid membranes by coarse-grained molecular dynamics simulations. It is found that the TAT peptides can hardly penetrate through the membrane at low peptide concentrations; after the concentration increases to a threshold value, they can cross the membrane through an induced nanopore due to the transmembrane electrostatic potential difference. The translocation of TAT peptides is mainly caused by the overall structural changes of membranes. Furthermore, we demonstrate that the translocation of gold nanoparticles (AuNPs) across the membrane is significantly affected by the number of grafted TAT peptides on the particle surface. The transmembrane efficiency of AuNPs may even be reduced when a small number of peptides modify them; whereas, when the number of grafted peptides increases to a certain value, the TAT-AuNP complex can translocate across the membrane in a pore-mediated way. Based on our findings, an effective strategy has been proposed to enhance the delivery efficiency of AuNPs. The present study can improve our understanding of the interactions between TAT peptides and cell membranes; it may also give some insightful suggestions on the design and development of nanocarriers with high efficiency for the delivery of nanoparticles and drugs.

Muscle membrane integrity in Duchenne muscular dystrophy: recent advances in copolymer-based muscle membrane stabilizers

The scientific premise, design, and structure-function analysis of chemical-based muscle membrane stabilizing block copolymers are reviewed here for applications in striated muscle membrane injury. Synthetic block copolymers have a rich history and wide array of applications from industry to biology. Potential for discovery is enabled by a large chemical space for block copolymers, including modifications in block copolymer mass, composition, and molecular architecture. Collectively, this presents an impressive chemical landscape to leverage distinct structure-function outcomes. Of particular relevance to biology and medicine, stabilization of damaged phospholipid membranes using amphiphilic block copolymers, classified as poloxamers or pluronics, has been the subject of increasing scientific inquiry. This review focuses on implementing block copolymers to protect fragile muscle membranes against mechanical stress. The review highlights interventions in Duchenne muscular dystrophy, a fatal disease of progressive muscle deterioration owing to marked instability of the striated muscle membrane. Biophysical and chemical engineering advances are presented that delineate and expand upon current understanding of copolymer-lipid membrane interactions and the mechanism of stabilization. The studies presented here serve to underscore the utility of copolymer discovery leading toward the therapeutic application of block copolymers in Duchenne muscular dystrophy and potentially other biomedical applications in which membrane integrity is compromised.

Molecular Mechanism of Lipid Nanodisk Formation by Styrene-Maleic Acid Copolymers

Experimental characterization of membrane proteins often requires solubilization. A recent approach is to use styrene-maleic acid (SMA) copolymers to isolate membrane proteins in nanometer-sized membrane disks, or so-called SMA lipid particles (SMALPs). The approach has the advantage of allowing direct extraction of proteins, keeping their native lipid environment. Despite the growing popularity of using SMALPs, the molecular mechanism behind the process remains poorly understood. Here, we unravel the molecular details of the nanodisk formation by using coarse-grained molecular dynamics simulations. We show how SMA copolymers bind to the lipid bilayer interface, driven by the hydrophobic effect. Due to the concerted action of multiple adsorbed copolymers, large membrane defects appear, including small, water-filled pores. The copolymers can stabilize the rim of these pores, leading to pore growth and membrane disruption. Although complete solubilization is not seen on the timescale of our simulations, self-assembly experiments show that small nanodisks are the thermodynamically preferred end state. Our findings shed light on the mechanism of SMALP formation and on their molecular structure. This can be an important step toward the design of optimized extraction tools for membrane protein research.

Dermal anti-oxidant, anti-inflammatory and anti-aging effects of Compritol ATO-based Resveratrol colloidal carriers prepared using mixed surfactants

In this study, Compritol ATO-based Resveratrol colloidal carriers (CCCs) were prepared and subjected to characterization and evaluation. In most formulae, the use of a binary-mixture of surfactants improved the physicochemical properties. CCC6 (containing P407/P188 as bi-surfactants) attained the highest drug loading, release efficiency during 24 h and occlusive effect for 48 h; in addition, it showed a uniform particle size distribution within the desired range. In-vivo studies were done based on the analysis of anti-oxidant markers [catalase (CAT), reduced glutathione (GSH) and superoxide dismutase (SOD)], anti-inflammatory markers [interleukin 6 (IL-6), interleukin 8 (IL-8) and rat Nuclear factor-kappa B (NF-κB)] and anti-wrinkling markers [matrix metalloproteinase (MMP-1) and Granulocyte-macrophage colony-stimulating factor (GM-CSF)], after UVB-irradiation. Results were significantly different when comparing the positive control and the negative control groups (p < 0.05). Rats pre-treated with CCC6 showed a great amelioration, and the level of the biochemical markers was significantly different compared to those of the positive control group and those pre-treated with the drug suspension (p < 0.05). Also, the high skin protective effect of CCC6 was proved by visual and histopathological examination of the rats' skin. Therefore, the current study proves the beneficial effects of the designed dermal Resveratrol-loaded colloidal system.

Formulation of Poloxamers for Drug Delivery

Poloxamers, also known as Pluronics®, are block copolymers of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO), which have an amphiphilic character and useful association and adsorption properties emanating from this. Poloxamers find use in many applications that require solubilization or stabilization of compounds and also have notable physiological properties, including low toxicity. Accordingly, poloxamers serve well as excipients for pharmaceuticals. Current challenges facing nanomedicine revolve around the transport of typically water-insoluble drugs throughout the body, followed by targeted delivery. Judicious design of drug delivery systems leads to improved bioavailability, patient compliance and therapeutic outcomes. The rich phase behavior (micelles, hydrogels, lyotropic liquid crystals, etc.) of poloxamers makes them amenable to multiple types of processing and various product forms. In this review, we first present the general solution behavior of poloxamers, focusing on their self-assembly properties. This is followed by a discussion of how the self-assembly properties of poloxamers can be leveraged to encapsulate drugs using an array of processing techniques including direct solubilization, solvent displacement methods, emulsification and preparation of kinetically-frozen nanoparticles. Finally, we conclude with a summary and perspective.

Absence of Albumin Improves in Vitro Cellular Uptake and Disruption of Poloxamer 407-Based Nanoparticles inside Cancer Cells

Novel nanoparticles based on Poloxamer 407 and vegetable oil were produced by high pressure homogenization. Functionalization of those nanoparticles was made by incorporation of folic acid (FA)-Poloxamer 407 conjugate. These nanoparticles showed suitable characteristics for intravenous therapeutic applications similarly to PEGylated albumin-based nanoparticles, previously described by our research group. Here, we found that the absence of albumin at the interface of Poloxamer 407-based nanoparticles improves the overall process of in vitro cellular uptake and nanoparticle disruption inside cancer cells (folate receptor, FR, positive cells). The results presented here suggest that interfacial composition of those nanoparticles is of paramount importance for drug trafficking inside cancer cells.

Understanding the Cellular Uptake of pH-Responsive Zwitterionic Gold Nanoparticles: A Computer Simulation Study

Surface functionalization of nanoparticles (NPs) with stealth polymers (e.g., hydrophilic and zwitterionic polymers) has become a common strategy to resist nonspecific protein adsorption recently. Understanding the role of surface decoration on NP-biomembrane interactions is of great significance to promote the application of NPs in biomedical fields. Herein, using coarse-grained molecular dynamics (CGMD) simulations, we investigate the interactions between stealth polymer-coated gold nanoparticles (AuNPs) and lipid membranes. The results show that AuNPs grafted with zwitterionic polymers can more easily approach the membrane surface than those coated with hydrophilic poly(ethylene glycol) (PEG), which can be explained by the weak dipole-dipole interaction between them. For zwitterionic AuNPs which can undergo pH-dependent charge conversion, different interaction modes which depend on the polymer protonation degree are found. When the protonation degree is low, the particles just adsorb on the membrane surface; at moderate protonation degrees, the particles can directly translocate across the lipid membrane through a transient hydrophilic pore formed on the membrane surface; the particles are fully wrapped by the curved lipid membrane at high protonation degrees, which may lead to endocytosis. Finally, the effect of polymer chain length on the cellular uptake of zwitterionic polymer-coated AuNPs is considered. The results demonstrate that longer polymer chain length will block the translocation of AuNPs across the lipid membrane when the protonation degree is not high; however, it can improve the transmembrane efficiency of AuNPs at high protonation degrees. We expect that these findings are of immediate interest to the design and synthesis of pH-responsive nanomaterials based on zwitterionic polymers and can prompt their further applications in the field of biomedicine.

Directed self-assembly of fluorescence responsive nanoparticles and their use for real-time surface and cellular imaging

Directed self-assemblies in water are known as the most efficient means of forming complex higher ordered structures in nature. Here we show a straightforward and robust method for particle assembly which utilises the amphiphilic tri-block co-polymer poloxamer-188 and a hydrophobic fluorophore as the two designer components, which have a built-in ability to convey spatial and temporal information about their surroundings to an observer. Templating of particle self-assembly is attributed to interactions between the fluorophore and hydrophobic segment of the poloxamer. Particle fluorescence in water is quenched but can be induced to selectively switch on in response to temperature, surface adsorption and cellular uptake. The ability of the particles to dynamically modulate emission intensity can be exploited for selective labelling and real-time imaging of drug crystal surfaces, natural fibres and insulin fibrils, and cellular delivery. As particle solutions are easily prepared, further applications for this water-based NIR-fluorescent paint are anticipated.

All-Atom Molecular Dynamics-Based Analysis of Membrane-Stabilizing Copolymer Interactions with Lipid Bilayers Probed under Constant Surface Tensions

An all-atom phospholipid bilayer and triblock copolymer model was developed for molecular dynamics (MD) studies. These were performed to investigate the mechanism of interaction between membrane-stabilizing triblock copolymer P188 and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC) lipid bilayers under applied lateral surface tension (γ) to model membrane mechanical stress. Results showed that P188 insertion is driven by the hydrophobic poly(propylene oxide) (PPO) core and dependent on bilayer area per lipid. Moreover, insertion of P188 increased the bilayer's resistance to mechanical rupture, as observed by a significant increase in the absolute lateral pressure required to disrupt the bilayer. To further investigate the specific chemical features of P188 underlying membrane stabilizer function, a series of MD simulations with triblock copolymers of the same class as P188 but of varying chemical composition and sizes were performed. Results showed that triblock copolymer insertion into the lipid bilayer is dependent on overall copolymer hydrophobicity, with higher copolymer hydrophobicity requiring a reduced bilayer area per lipid ratio for insertion. Further analysis revealed that the effect of copolymer insertion on membrane mechanical integrity was also dependent on hydrophobicity. Here, P188 insertion significantly increased the absolute apparent lateral pressure required to rupture the POPC bilayer, thereby protecting the membrane against mechanical stress. In marked contrast, highly hydrophobic copolymers decreased the lateral pressure necessary for membrane rupture and thus rendering the membrane significantly more susceptible to mechanical stress. These new in silico findings align with recent experimental findings using synthetic lipid bilayers and in muscle cells in vitro and mouse models in vivo. Collectively, these data underscore the importance of PEO-PPO-PEO copolymer chemical composition in copolymer-based muscle membrane stabilization in vitro and in vivo. All-atom modeling with MD simulations holds promise for investigating novel copolymers with enhanced membrane interacting properties.

An accurate coarse-grained model for chitosan polysaccharides in aqueous solution

Computational models can provide detailed information about molecular conformations and interactions in solution, which is currently inaccessible by other means in many cases. Here we describe an efficient and precise coarse-grained model for long polysaccharides in aqueous solution at different physico-chemical conditions such as pH and ionic strength. The Model is carefully constructed based on all-atom simulations of small saccharides and metadynamics sampling of the dihedral angles in the glycosidic links, which represent the most flexible degrees of freedom of the polysaccharides. The model is validated against experimental data for Chitosan molecules in solution with various degree of deacetylation, and is shown to closely reproduce the available experimental data. For long polymers, subtle differences of the free energy maps of the glycosidic links are found to significantly affect the measurable polymer properties. Therefore, for titratable monomers the free energy maps of the corresponding links are updated according to the current charge of the monomers. We then characterize the microscopic and mesoscopic structural properties of large chitosan polysaccharides in solution for a wide range of solvent pH and ionic strength, and investigate the effect of polymer length and degree and pattern of deacetylation on the polymer properties.

Effects of Membrane Defects and Polymer Hydrophobicity on Networking Kinetics of Vesicles

The kinetics of clustering unilamellar vesicles induced by inverse Pluronics [poly(propylene oxide)_m-poly(ethylene oxide)_n-poly(propylene oxide)_m, PO_m-EO_n-PO_m] was investigated via experiments and molecular dynamic simulations. Two important factors for controlling the networking kinetics are the membrane defects, presumably located at the interfacial region between two lipid domains induced by acyl chain mismatch, and the polymer hydrophobicity. As expected, the clustering rate increases significantly with increasing bilayer defects on the membrane where the insertion of PPO is likely to take place because of the reduced energy barrier for the insertion of PO. The hydrophobic interaction between the PO blocks and membranes with the defects region dictates the "anchoring" kinetics, which is controlled by the association-dissociation of PO with the lipid membrane. As a result, the dependence of clustering rate on polymer concentration is strongly influenced by the hydrophobicity of the PO blocks. Nevertheless, longer PO blocks show stronger association with the membrane, resulting in faster consumption of the "active" sites made of these defect regions (causing mostly "invalid" insertions) with increasing polymer concentration, hence inhibiting the formation of large networking clusters, while shorter PO blocks undergo more frequent association with/dissociation from the defects, allowing continuous formation of larger clusters with increasing polymer concentration. This study provides important insights into how the organization and dynamics of a biomembrane influence its interaction with foreign amphiphilic molecules.

Development of a nanoprecipitation method for the entrapment of a very water soluble drug into Eudragit RL nanoparticles

Rivastigmine hydrogen tartrate (RHT), one of the potential cholinesterase inhibitors, has received great attention as a new drug candidate for the treatment of Alzheimer's disease. However, the bioavailability of RHT from the conventional pharmaceutical forms is low because of the presence of the blood brain barrier. The main aim of the present study was to prepare positively charged Eudragit RL 100 nanoparticles as a model scaffold for providing a sustained release profile for RHT. The formulations were evaluated in terms of particle size, zeta potential, surface morphology, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). Drug entrapment efficiency and in vitro release properties of lyophilized nanoparticles were also examined. The resulting formulations were found to be in the size range of 118 nm to 154 nm and zeta potential was positive (+22.5 to 30 mV). Nanoparticles showed the entrapment efficiency from 38.40 ± 8.94 to 62.00 ± 2.78%. An increase in the mean particle size and the entrapment efficiency was observed with an increase in the amount of polymer. The FTIR, XRD, and DSC results ruled out any chemical interaction between the drug and Eudragit RL100 polymer. RHT nanoparticles containing low ratio of polymer to drug (4:1) presented a faster drug release and on the contrary, nanoparticles containing high ratio of polymer to drug (10:1) were able to give a more sustained release of the drug. The study revealed that RHT nanoparticles were capable of releasing the drug in a prolonged period of time and increasing the drug bioavailability.

Behavior of P85 and P188 Poloxamer Molecules: Computer Simulations Using United-Atom Force-Field

To study the interaction between poloxamer molecules and lipid bilayers using molecular dynamics simulation technique with the united-atom resolution, we augmented the GROMOS force-field to include poloxamers. We validated the force-field by calculating the radii of gyration of two poloxamers, P85 and P188, solvated in water and by considering the poloxamer density distributions at the air/water interface. The emphasis of our simulations was on the study of the interaction between poloxamers and lipid bilayer. At the water/lipid bilayer interface, we observed that both poloxamers studied, P85 and P188, behaved like surfactants: the hydrophilic blocks of poloxamers became adsorbed at the polar interface, while their hydrophobic block penetrated the interface into the aliphatic tail region of the lipid bilayer. We also observed that when P85 and P188 poloxamers interacted with damaged membranes that contained pores, the hydrophobic blocks of copolymers penetrated into the membrane in the vicinity of the pore and compressed the membrane. Due to this compression, water molecules were evacuated from the pore.