Introduction of Positive Charges into Zwitterionic Phospholipid Monolayers Disrupts Water Structure Whereas Negative Charges Enhances It

Organic Nucleation: Water Rearrangement Reveals the Pathway of Ibuprofen

The organic nucleation of the pharmaceutical ibuprofen is investigated, as triggered by the protonation of ibuprofen sodium salt at elevated pH. The growth and aggregation of nanoscale solution species by Analytical Ultracentrifugation and Molecular Dynamics (MD) simulations is tracked. Both approaches reveal solvated molecules, oligomers, and prenucleation clusters, their size as well as their hydration at different reaction stages. By combining surface-specific vibrational spectroscopy and MD simulations, water interacting with ibuprofen at the air-water interface during nucleation is probed. The results show the structure of water changes upon ibuprofen protonation in response to the charge neutralization. Remarkably, the water structure continues to evolve despite the saturation of protonated ibuprofen at the hydrophobic interface. This further water rearrangement is associated with the formation of larger aggregates of ibuprofen molecules at a late prenucleation stage. The nucleation of ibuprofen involves ibuprofen protonation and their hydrophobic assembly. The results highlight that these processes are accompanied by substantial water reorganization. The critical role of water is possibly relevant for organic nucleation in aqueous environments in general.

In situ study of structural changes: Exploring the mechanism of protein corona transition from soft to hard

HYPOTHESIS

The process of protein corona changes has been widely believed to follow the Vroman effect, while protein structural change during the process is rarely reported, due to the lack of analytical methods. In-situ interpretation for protein structural change is critical to processes such as the recognition and transport of nanomaterials.

EXPERIMENTS

Molecular dynamics (MD) simulation was used to predict the deflection and twist of the protein tertiary structure. The structural changes of the surface protein corona during the interaction of nanoparticles (NPs) with lipid bilayer were probed in situ and real-time by sum frequency generation (SFG) spectroscopy.

FINDINGS

The ring tertiary structure of the protein corona is altered from vertical to horizontal on particle surface, a process of the soft-to-hard structural transition, which is contributed by the hydrogen bonding force between the protein and water molecules. The negatively charged protein corona can induce the redistribution of interfacial charge, leading to a more stable hydrogen bond network of the interfacial water. Our findings suggest that the structural change from flexible to rigid is a crucial process in the soft-to-hard transition of the protein corona, which will be a beneficial supplement to the Vroman effect of protein adsorption.

Liposomes and Lipid Droplets Display a Reversal of Charge-Induced Hydration Asymmetry

The unique properties of water are critical for life. Water molecules have been reported to hydrate cations and anions asymmetrically in bulk water, being a key element in the balance of biochemical interactions. We show here that this behavior extends to charged lipid nanoscale interfaces. Charge hydration asymmetry was investigated by using nonlinear light scattering methods on lipid nanodroplets and liposomes. Nanodroplets covered with negatively charged lipids induce strong water ordering, while droplets covered with positively charged lipids induce negligible water ordering. Surprisingly, this charge-induced hydration asymmetry is reversed around liposomes. This opposite behavior in charge hydration asymmetry is caused by a delicate balance of electrostatic and hydrogen-bonding interactions. These findings highlight the importance of not only the charge state but also the specific distribution of neutral and charged lipids in cellular membranes.

Cations Control Lipid Bilayer Memcapacitance Associated with Long-Term Potentiation

Phospholipid bilayers can be described as capacitors whose capacitance per unit area (specific capacitance, Cm) is determined by their thickness and dielectric constant─independent of applied voltage. It is also widely assumed that the Cm of membranes can be treated as a "biological constant". Recently, using droplet interface bilayers (DIBs), it was shown that zwitterionic phosphatidylcholine (PC) lipid bilayers can act as voltage-dependent, nonlinear memory capacitors, or memcapacitors. When exposed to an electrical "training" stimulation protocol, capacitive energy storage in lipid membranes was enhanced in the form of long-term potentiation (LTP), which enables biological learning and long-term memory. LTP was the result of membrane restructuring and the progressive asymmetric distribution of ions across the lipid bilayer during training, which is analogous, for example, to exponential capacitive energy harvesting from self-powered nanogenerators. Here, we describe how LTP could be produced from a membrane that is continuously pumped into a nonequilibrium steady state, altering its dielectric properties. During this time, the membrane undergoes static and dynamic changes that are fed back to the system's potential energy, ultimately resulting in a membrane whose modified molecular structure supports long-term memory storage and LTP. We also show that LTP is very sensitive to different salts (KCl, NaCl, LiCl, and TmCl3), with LiCl and TmCl3 having the most profound effect in depressing LTP, relative to KCl. This effect is related to how the different cations interact with the bilayer zwitterionic PC lipid headgroups primarily through electric-field-induced changes to the statistically averaged orientations of water dipoles at the bilayer headgroup interface.

Engineering of Solvation Entropy by Poly(4-styrenesulfonic acid) Additive in an Aqueous Electrochemical System for Enhanced Low-Grade Heat Harvesting

The thermally regenerative electrochemical cycle (TREC) is a reliable and efficient approach to converting low-grade heat into electricity. A high temperature coefficient (α) is the key to maximize the energy conversion efficiency of the TREC system. In this study, we present significant improvement of α of a Prussian blue analogue (PBA)-based electrochemical cell by adding poly(4-styrenesulfonic acid) (PSS) to the electrolyte. Raman spectra showed that water-soluble charged polymers strongly affect the ion hydration structure and increase the entropy change (ΔS) during ion intercalation in PBA. A large α of -2.01 mV K^-1 and high absolute heat-to-electricity conversion efficiency up to 1.83% was achieved with a TREC cell in the temperature range 10-40 °C. This study provides a fundamental understanding of the origin of α and a facile method to boosting the temperature coefficient for building a highly efficient low-grade heat harvesting system.

Magnesium Ion Responses of Zwitterionic Phosphatidylethanolamine Head and Tail Groups Elucidated by Frequency-Resolved SFG-VS

In the present study, the effects of magnesium ions on the conformational changes of the deuterated 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine (D₅₄-DMPE) monolayer were elucidated by frequency-resolved sum frequency generation vibrational spectroscopy (SFG-VS) and surface pressure-area isotherm measurements. It is found that the tilt angles of the methyl in tail groups decrease, while the tilt angles of the phosphate and methylene in head groups increase during the compression of the DMPE monolayers at both the air/water interface and the air/MgCl₂ solution interfaces. It is also shown that the tilt angle of the methyl in the tail groups slightly decreases, while the tilt angles of the phosphate and methylene in the head groups significantly increase as the MgCl₂ concentration increases from 0 to 1.0 M. These results indicate that both the tail groups and the head groups of the DMPE molecules become closer to the surface normal, as the MgCl₂ concentration increases in the subphase.

Lipid-Specific Direct Translocation of the Cell-Penetrating Peptide NAF-144-67 across Bilayer Membranes

The cell-penetrating peptide NAF-1 has recently emerged as a promising candidate for selective penetration and destruction of cancer cells. It displays numerous membrane-selective behaviors including cell-specific uptake and organelle-specific degradation. In this work, we explore membrane penetration and translocation of NAF-1 in model lipid bilayer vesicles as a function of lipid identity in zwitterionic phosphatidylcholine lipids mixed with anionic phosphatidylserine, phosphatidylglycerol, and phosphatidic acid lipids. By monitoring the digestion of NAF-1 using the protease trypsin located inside but not outside the vesicles, we determined that the translocation of NAF-1 was significantly enhanced by the presence of phosphatidic acid in the membrane compared to the other three anionic or zwitterionic lipids. These findings were correlated to fluorescence measurements of dansyl-labeled NAF-1, which revealed whether noncovalent interactions between NAF-1 and the bilayer were most stable either at the membrane/solution interface or within the membrane interior. Phosphatidic acid promoted interactions with fatty acid tails, while phosphatidylcholine, phosphatidylserine, and phosphatidylglycerol stabilized interactions with polar lipid headgroups. Interfacial vibrational sum frequency spectroscopy experiments revealed that the phosphate moiety on phosphatidic acid headgroups was better hydrated than on the other three lipids, which helped to shuttle NAF-1 into the hydrophobic region. Our findings demonstrate that permeation does not depend on the net charge on phospholipid lipid headgroups in these model vesicles and suggest a model wherein NAF-1 crosses membranes selectively due to lipid-specific interactions at bilayer surfaces.

Effect of deuteration on a phosphatidylcholine lipid monolayer structure: New insights from vibrational sum-frequency generation spectroscopy

We used vibrational sum-frequency generation (VSFG) spectroscopy to elucidate the possible effect of various levels of isotopic substitution (H/D) on the properties of the DPPC monolayer by probing DPPC/D₂O interface. We found that deuteration of the choline group has a great impact on monolayer properties, while monolayers with deuterated alkyl chains do not exhibit any differences under our experimental conditions. In addition, deuteration of the choline group strongly affected the hydration of the phosphate group. We showed by probing symmetric stretching vibration of phosphate group that denser packing only slightly reduced the hydration of DPPC-d13 and DPPC-d75 monolayers. Moreover, addition of calcium ions, which generally cause a marked dehydration of the lipid monolayer, had no effect on lipid monolayers with deuterated choline group. We proposed that one way to explain this experimental finding could be deuteration induced changes in the structure of lipid's choline group, resulting in a well-hydrated but Ca²⁺ ion blocking structure. These results have important implications for various spectroscopic techniques, which commonly use deuteration of phospholipids to circumvent overlapping between vibrational bands.

Phospholipid acyl tail affects lipid headgroup orientation and membrane hydration

Biomembrane hydration is crucial for understanding processes at biological interfaces. While the effect of the lipid headgroup has been studied extensively, the effect (if any) of the acyl chain chemical structure on lipid-bound interfacial water has remained elusive. We study model membranes composed of phosphatidylethanolamine (PE) and phosphatidylcholine (PC) lipids, the most abundant lipids in biomembranes. We explore the extent to which the lipid headgroup packing and associated water organization are affected by the lipid acyl tail unsaturation and chain length. To this end, we employ a combination of surface-sensitive techniques, including sum-frequency generation spectroscopy, surface pressure measurements, and Brewster angle microscopy imaging. Our results reveal that the acyl tail structure critically affects the headgroup phosphate orientational distribution and lipid-associated water molecules, for both PE and PC lipid monolayers at the air/water interface. These insights reveal the importance of acyl chain chemistry in determining not only membrane fluidity but also membrane hydration.

Contact Ion Pair Formation Is Not Necessarily Stronger than Solvent Shared Ion Pairing

Vibrational sum frequency spectroscopy (VSFS) and pressure-area Langmuir trough measurements were used to investigate the binding of alkali metal cations to eicosyl sulfate (ESO₄) surfactants in monolayers at the air/water interface. The number density of sulfate groups could be tuned by mixing the anionic surfactant with eicosanol. The equilibrium dissociation constant for K⁺ to the fatty sulfate interface showed 10 times greater affinity than for Li⁺ and approximately 3 times greater than for Na⁺. All three cations formed solvent shared ion pairs when the mole fraction of ESO₄ was 0.33 or lower. Above this threshold charge density, Li⁺ formed contact ion pairs with the sulfate headgroups, presumably via bridging structures. By contrast, K⁺ only bound to the sulfate moieties in solvent shared ion pairing configurations. The behavior for Na⁺ was intermediate. These results demonstrate that there is not necessarily a correlation between contact ion pair formation and stronger binding affinity.

Evaluating the cross-membrane dynamics of a charged molecule on lipid films with different surface curvature

Does the curvature of a phospholipid membrane influence the permeability of the lipid bilayers? This is a question of great importance yet hard to answer. In this work the permeability of a positively charged rod like probing molecule (D289 dye) on the bilayers of DOPG lipid vesicles was investigated using angle resolved second harmonic generation method. It was revealed that the permeability of D289 on the surface of small vesicles with ∼ 100 nm diameter was notably lower than that on giant vesicles with ∼ 1000 nm diameter. With the increasing of temperature or the introducing of dimethyl sulfoxide (DMSO) in the solutions, the D289 permeability of the lipid bilayers was notably enhanced as expected, on both the small and the giant vesicles. Still, the D289 permeability of the lipid film with more curvature is lower than the relatively flat film in all these cases. This work demonstrated a general protocol for the investigating of surface permeability of lipid films with various curvature.

Calcium Ion Binding at the Lipid-Water Interface Alters the Ion Permeability of Phospholipid Bilayers

Calcium ions (Ca²⁺) play a fundamental role in membrane-associated physiological processes. Ca²⁺ can also significantly modulate the physicochemical properties of phospholipid bilayers, but whether this occurs at physiologically relevant concentrations is difficult to determine because of the uncertainty in the reported affinity of Ca²⁺ for phospholipid bilayers. In this article, we determine the apparent affinity of Ca²⁺ for zwitterionic phospholipid bilayers using tethered bilayer lipid membranes (tBLMs) used in conjunction with swept-frequency electrical impedance spectroscopy (EIS). We report that Ca²⁺ binds to phospholipid bilayers at physiologically relevant concentrations and modulates membrane permeability. We present direct experimental evidence that this effect is governed by specific interactions with select lipid headgroup moieties, which is supported by data from molecular dynamics (MD) simulations. This is the first reported use of tBLM/EIS to estimate cation-membrane affinity. Combined with MD simulations, this technique provides a novel methodology to elucidate the molecular details of cation-membrane interactions at the water-phospholipid interface.

Strong Surface Hydration and Salt Resistant Mechanism of a New Nonfouling Zwitterionic Polymer Based on Protein Stabilizer TMAO

Zwitterionic polymers exhibit excellent nonfouling performance due to their strong surface hydrations. However, salt molecules may severely reduce the surface hydrations of typical zwitterionic polymers, making the application of these polymers in real biological and marine environments challenging. Recently, a new zwitterionic polymer brush based on the protein stabilizer trimethylamine N-oxide (TMAO) was developed as an outstanding nonfouling material. Using surface-sensitive sum frequency generation (SFG) vibrational spectroscopy, we investigated the surface hydration of TMAO polymer brushes (pTMAO) and the effects of salts and proteins on such surface hydration. It was discovered that exposure to highly concentrated salt solutions such as seawater only moderately reduced surface hydration. This superior resistance to salt effects compared to other zwitterionic polymers is due to the shorter distance between the positively and negatively charged groups, thus a smaller dipole in pTMAO and strong hydration around TMAO zwitterion. This results in strong bonding interactions between the O^- in pTMAO and water, and weaker interaction between O^- and metal cations due to the strong repulsion from the N⁺ and hydration water. Computer simulations at quantum and atomistic scales were performed to support SFG analyses. In addition to the salt effect, it was discovered that exposure to proteins in seawater exerted minimal influence on the pTMAO surface hydration, indicating complete exclusion of protein attachment. The excellent nonfouling performance of pTMAO originates from its extremely strong surface hydration that exhibits effective resistance to disruptions induced by salts and proteins.

Water at charged interfaces

The ubiquity of aqueous solutions in contact with charged surfaces and the realization that the molecular-level details of water-surface interactions often determine interfacial functions and properties relevant in many natural processes have led to intensive research. Even so, many open questions remain regarding the molecular picture of the interfacial organization and preferential alignment of water molecules, as well as the structure of water molecules and ion distributions at different charged interfaces. While water, solutes and charge are present in each of these systems, the substrate can range from living tissues to metals. This diversity in substrates has led to different communities considering each of these types of aqueous interface. In this Review, by considering water in contact with metals, oxides and biomembranes, we show the essential similarity of these disparate systems. While in each case the classical mean-field theories can explain many macroscopic and mesoscopic observations, it soon becomes apparent that such theories fail to explain phenomena for which molecular properties are relevant, such as interfacial chemical conversion. We highlight the current knowledge and limitations in our understanding and end with a view towards future opportunities in the field.

The interaction of chondroitin sulfate with a lipid monolayer observed by using nonlinear vibrational spectroscopy

The first vibrational sum-frequency generation (VSFG) spectra of chondroitin sulfate (CS) interacting with dipalmitoyl phosphatidylcholine (DPPC) at air–liquid interface are reported here, collected at a laser repetition rate of 100 kHz. By studying the VSFG spectra in the regions of 1050–1450 cm⁻¹, 2750–3180 cm⁻¹, and 3200–3825 cm⁻¹, it was concluded that in the presence of Ca²⁺ ions, the head groups together with the head-group-bound water molecules in the DPPC monolayer are strongly influenced by the interaction with CS, while the organization of the phospholipid tails remains mostly unchanged. The interactions were observed at a CS concentration below 200 nM, which exemplifies the potential of VSFG in studying biomolecular interactions at low physiological concentrations. The VSFG spectra recorded in the O–H stretching region at chiral polarization combination imply that CS molecules are organized into ordered macromolecular superstructures with a chiral secondary structure.

Chondroitin sulfate interacts with the headgroups of a lipid monolayer at the air–liquid interface and shows a chiral secondary structure.

Role of Water in CaCO3 Biomineralization

Biomineralization occurs in aqueous environments. Despite the ubiquity and relevance of CaCO₃ biomineralization, the role of water in the biomineralization process has remained elusive. Here, we demonstrate that water reorganization accompanies CaCO₃ biomineralization for sea urchin spine generation in a model system. Using surface-specific vibrational spectroscopy, we probe the water at the interface of the spine-associated protein during CaCO₃ mineralization. Our results show that, while the protein structure remains unchanged, the structure of interfacial water is perturbed differently in the presence of both Ca²⁺ and CO₃^2– compared to the addition of only Ca²⁺. This difference is attributed to the condensation of prenucleation mineral species. Our findings are consistent with a nonclassical mineralization pathway for sea urchin spine generation and highlight the importance of protein hydration in biomineralization.

Theoretical and Experimental Optimization of the Graft Density of Functionalized Anti-Biofouling Surfaces by Cationic Brushes

Diseases and complications related to catheter materials are severe problems in biomedical material applications, increasing the infection risk and medical expenses. Therefore, there is an enormous demand for catheter materials with antibacterial and antifouling properties. Considering this, in this work, we developed an approach of constructing antibacterial surfaces on polyurethane (PU) via surface-initiated atom transfer radical polymerization (SI-ATRP). A variety of cationic polymers were grafted on PU. The biocompatibility and antifouling properties of all resulting materials were evaluated and compared. We also used a theoretical algorithm to investigate the anticoagulant mechanism of our PU-based grafts. The hemocompatibility and anti-biofouling performance improved at a 86–112 μg/cm² grafting density. The theoretical simulation demonstrated that the in vivo anti-fouling performance and optimal biocompatibility of our PU-based materials could be achieved at a 20% grafting degree. We also discuss the mechanism responsible for the hemocompatibility of the cationic brushes fabricated in this work. The results reported in this paper provide insights and novel ideas on material design for applications related to medical catheters.

Zn2+ Binds to Phosphatidylserine and Induces Membrane Blebbing

Herein, we show that Zn²⁺ binds to phosphatidylserine (PS) lipids in supported lipid bilayers (SLBs), forming a PS-Zn²⁺ complex with an equilibrium dissociation constant of ∼100 μM. Significantly, Zn²⁺ binding to SLBs containing more than 10 mol % PS induces extensive reordering of the bilayer. This reordering is manifest through bright spots of high fluorescence intensity that can be observed when the bilayer contains a dye-labeled lipid. Measurements using atomic force microscopy (AFM) reveal that these spots represent three-dimensional unilamellar blebs. Bleb formation is ion specific, inducible by exposing the bilayer to μM concentrations of Zn²⁺ but not Mg²⁺, Cu²⁺, Co²⁺, or Mn²⁺. Moreover, Ca²⁺ can induce some blebbing at mM concentrations but not nearly as effectively as Zn²⁺. The interactions of divalent metal cations with PS lipids were further investigated by a combination of vibrational sum frequency spectroscopy (VSFS) and surface pressure-area isotherm measurements. VSFS revealed that Zn²⁺ and Ca²⁺ were bound to the phosphate and carboxylate moieties on PS via contact ion pairing, dehydrating the lipid headgroup, whereas Mg²⁺ and Cu²⁺ were bound without perturbing the hydration of these functional groups. Additionally, Zn²⁺ was found to dramatically reduce the area per lipid in lipid monolayers, while Mg²⁺ and Cu²⁺ did not. Ca²⁺ could also reduce the area per lipid but only when significantly higher surface pressures were applied. These measurements suggest that Zn²⁺ caused lipid blebbing by decreasing the area per lipid on the side of the bilayer to which the salt was exposed. Such findings have implications for blebbing, fusion, oxidation, and related properties of PS-rich membranes in biological systems where Zn²⁺ concentrations are asymmetrically distributed.

Ultrafast Dynamics at the Lipid-Water Interface: DMSO Modulates H-Bond Lifetimes

Dimethyl sulfoxide (DMSO) is a common cosolvent and cryopreservation agent used to freeze cells and tissues. DMSO alters the H-bond structure of water, but its interactions with biomolecules and, specifically, with biological interfaces remain poorly understood. Here we investigate the effects of DMSO on the H-bond dynamics at the lipid-water interface using a combination of ultrafast two-dimensional infrared (2D IR) spectroscopy and molecular dynamics simulations. Ester carbonyl absorption spectra show that DMSO dehydrates the interface, and simulations show that the area per lipid is decreased. Ultrafast 2D IR spectra measure the time scales of frequency fluctuations at the ester carbonyl positions located precisely between the hydrophobic and hydrophilic regions of the membrane. 2D IR measurements show that low DMSO concentrations (<10 mol %) induce ∼40% faster H-bond dynamics compared with pure water, whereas increased concentrations (>10-20 mol %) once again slow down the dynamics. This slow-fast-slow trend is described in terms of two different solvation regimes. Below 10 mol %, DMSO weakens the interfacial H bond, leading to faster "bulk-like" dynamics, whereas above 10 mol %, water molecules become "relatively immobilized" as the H-bond networks becoming disrupted by the H-bond donor/acceptor imbalance at the interface. These studies are an important step toward characterizing the environments around lipid membranes, which are essential to numerous biological processes.

Surface hydration for antifouling and bio-adhesion

Antifouling properties of materials play crucial roles in many important applications such as biomedical implants, marine antifouling coatings, biosensing, and membranes for separation. Poly(ethylene glycol) (or PEG) containing polymers and zwitterionic polymers have been shown to be excellent antifouling materials. It is believed that their outstanding antifouling activity comes from their strong surface hydration. On the other hand, it is difficult to develop underwater glues, although adhesives with strong adhesion in a dry environment are widely available. This is related to dehydration, which is important for adhesion for many cases while water is the enemy of adhesion. In this research, we applied sum frequency generation (SFG) vibrational spectroscopy to investigate buried interfaces between mussel adhesive plaques and a variety of materials including antifouling polymers and control samples, supplemented by studies on marine animal (mussel) behavior and adhesion measurements. It was found that PEG containing polymers and zwitterionic polymers have very strong surface hydration in an aqueous environment, which is the key for their excellent antifouling performance. Because of the strong surface hydration, mussels do not settle on these surfaces even after binding to the surfaces with rubber bands. For control samples, SFG results indicate that their surface hydration is much weaker, and therefore mussels can generate adhesives to displace water to cause dehydration at the interface. Because of the dehydration, mussels can foul on the surfaces of these control materials. Our experiments also showed that if mussels were forced to deposit adhesives onto the PEG containing polymers and zwitterionic polymers, interfacial dehydration did not occur. However, even with the strong interfacial hydration, strong adhesion between mussel adhesives and antifouling polymer surfaces was detected, showing that under certain circumstances, interfacial water could enhance the interfacial bio-adhesion.

Antifouling properties of materials play crucial roles in many important applications such as biomedical implants, marine antifouling coatings, biosensing, and membranes for separation.

Broadband vibrational sum-frequency generation spectrometer at 100 kHz in the 950-1750 cm-1 spectral range utilizing a LiGaS2 optical parametric amplifier

We present a 100 kHz broadband vibrational sum-frequency generation (VSFG) spectrometer operating in the 5.7-10.5 µm (950-1750 cm^-1) wavelength range. The mid-infrared beam of the system is obtained from a collinear, type-I LiGaS₂-crystal-based optical parametric amplifier seeded by a supercontinuum and pumped directly by 180 fs, ~32 µJ, 1.03 µm pulses from an Yb:KGd(WO₄)₂ laser system. Up to 0.5 µJ mid-infrared pulses with durations below 100 fs were obtained after dispersion compensation utilizing bulk materials. We demonstrate the utility of the spectrometer by recording high-resolution, low-noise vibrational spectra of Langmuir-Blodgett supported lipid monolayers on CaF₂. The presented VSFG spectrometer scheme offers superior signal-to-noise ratios and constitutes a high-efficiency, low-cost, easy-to-use alternative to traditional schemes relying on optical parametric amplification followed by difference frequency generation.