ATR FTIR Spectroscopic Study on Insect Body Surface Lipids Rich in Methylene-Interrupted Diene

Assessment of Changes in the Fat Profile of House Cricket Flour during 12 Months of Storage in Various Conditions

Considering Acheta domecticus flour's growing importance and utilization as an ingredient in many food products, research on its storage is essential. The objective of this study was to determine the chemical and nutritional fat profile of house cricket (Acheta domesticus) flour during storage for 12 months under different storage temperatures (-18 °C, +4 °C, and +20 °C in two variants, with and without access to light). Insect flour was studied using Fourier-transform infrared spectroscopy (FTIR). The fatty acids content was determined, and dietary indicators were calculated. The acid value, peroxide value, and anisidine value were also determined, and differential scanning calorimetry was performed. The results obtained from spectroscopic analysis of Acheta domesticus flour were consistent with the biochemical data. During the 12-month period of flour storage, the storage temperature significantly influenced the percentage composition of identified groups of fatty acids and the values of all presented ratios and dietary indices. During storage at refrigerated temperatures (-18 °C and +4 °C), no changes were observed in the fatty acid content and dietary indices, indicating that refrigerated temperatures provide oxidative stability to flour during 12 months of storage. Samples stored at 20 °C had higher acid values (AV), peroxide values (PV), and anisidine values (p-AV) compared to samples stored at lower temperatures (4 °C and -18 °C). Simultaneously, an increase in SFA and MUFA, as well as a decrease in PUFA and UFA, was noted in samples stored at room temperature. Storing cricket flour at lower temperatures when the storage period will be more than 12 months is essential to restrict the occurrence of fat oxidation. Elevated temperatures and exposure to light have a notable effect in hastening oxidation mechanisms, reducing thermal resilience, and inducing more pronounced alterations in the quality of fats.

Microscopic vibrational circular dichroism on the forewings of a European hornet: heterogenous sequences of protein domains with different secondary structures

We developed a microscopic scanning for vibrational circular dichroism (VCD) spectroscopy in which a quantum cascade laser is equipped with a highly focused infrared light source to attain a spatial resolution of 100 μm. This system was applied to the forewing of a European hornet to reveal how the protein domains are organised. Two-dimensional patterns were obtained from the VCD signals with steps of 100 μm. We scanned the 1500-1740 cm-1 wavenumber range, which covers amide I and II absorptions. Zone sequenced α-helical and β-sheet domains within an area of 200 μm2 in membranes close to where two veins cross. The sign of the VCD signal at 1650 cm-1 changed from positive to negative when probed along the zone axis, intermediated by the absence of VCD activity. The significance of this zone is discussed from the viewpoint of the mechanical properties required for flying motion. These features are unattainable using conventional FTIR (Fourier transform infrared) or FT-VCD methods with a spatial resolution of ∼10 mm2.

Multidimensional vibrational circular dichroism for insect wings: Comparison of species

This study reports the microscopic measurements of vibrational circular dichroism (VCD) on four different insect wings using a quantum cascade laser VCD system equipped with microscopic scanning capabilities (named multi-dimensional VCD [MultiD-VCD]). Wing samples, including (i) beetle, Anomala albopilosa (female), (ii) European hornet, Verspa crabro flavofasciata Cameron, 1903 (female), (iii) tiny dragonfly, Nannophya pygmae Rambur, 1842 (male), and (iv) dragonfly, Symetrum gracile Oguma, 1915 (male), were used in this study. Two-dimensional patterns of VCD signals (~10 mm × 10 mm) were obtained at a spatial resolution of 100 μm. Measurements covered the absorption peaks assigned to amides I and II in the range of 1500-1740 cm-1 . The measurements were based on the enhancement of VCD signals for the stereoregular linkage of peptide groups. The patterns were remarkably dependent on the species. In samples (i) and (ii), the wings comprised segregated domains of protein aggregates of different secondary structures. The size of each microdomain was approximately 100 μm. In contrast, no clear VCD spectra were detected in samples (iii) and (iv). One possible reason was that the chain of stereoregular polypeptides was too short to achieve VCD enhancement in samples (iii) and (iv). Notably, the unique features were only observed in the VCD spectra because the IR spectra were nearly the same among the species. The VCD results hinted at the connection of protein microscopic structures with the wing flapping mechanisms of each species.

High-Flux Nanofibrous Composite Reverse Osmosis Membrane Containing Interfacial Water Channels for Desalination

A nanofibrous composite reverse osmosis (RO) membrane with a polyamide barrier layer containing interfacial water channels was fabricated on an electrospun nanofibrous substrate via an interfacial polymerization process. The RO membrane was employed for desalination of brackish water and exhibited enhanced permeation flux as well as rejection ratio. Nanocellulose was prepared by sequential oxidations of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) and sodium periodate systems and surface grafting with different alkyl groups including octyl, decanyl, dodecanyl, tetradecanyl, cetyl, and octadecanyl groups. The chemical structure of the modified nanocellulose was verified subsequently by Fourier transform infrared (FTIR), thermal gravimetric analysis (TGA), and solid NMR measurements. Two monomers, trimesoyl chloride (TMC) and m-phenylenediamine (MPD), were employed to prepare a cross-linked polyamide matrix, i.e., the barrier layer of the RO membrane, which integrated with the alkyl groups-grafted nanocellulose to build up interfacial water channels via interfacial polymerization. The top and cross-sectional morphologies of the composite barrier layer were observed by means of scanning electron microscopy (SEM), atomic force microscopy (AFM), and transmission electron microscopy (TEM) to verify the integration structure of the nanofibrous composite containing water channels. The aggregation and distribution of water molecules in the nanofibrous composite RO membrane verified the existence of water channels, demonstrated by molecular dynamics (MD) simulations. The desalination performance of the nanofibrous composite RO membrane was conducted and compared with that of commercially available RO membranes in the processing of brackish water, where 3 times higher permeation flux and 99.1% rejection ratio against NaCl were accomplished. This indicated that the engineering of interfacial water channels in the barrier layer could substantially increase the permeation flux of the nanofibrous composite membrane while retaining the high rejection ratio as well, i.e., to break through the trade-off between permeation flux and rejection ratio. Antifouling properties, chlorine resistance, and long-term desalination performance were also demonstrated to evaluate the potential applications of the nanofibrous composite RO membrane; remarkable durability and robustness were achieved in addition to 3 times higher permeation flux and a higher rejection ratio against commercial RO membranes in brackish water desalination.

Physicochemical properties of soybean β-conglycinin-based films affected by linoleic acid

To explore the interaction between lipids and proteins during emulsion film formation, the linoleic acid concentration effects on the physicochemical properties of soybean β-conglycinin (7S) films were studied. The viscosity and size of oil droplets in the film-forming solution gradually increased with the increasing linoleic acid concentration. As the linoleic acid concentration increased, the number of oil droplets on the film surfaces and elongation at break of films gradually increased, whereas the tensile strength decreased. The films containing 20% linoleic acid had the highest water vapor permeability value, which was decreased by increasing or decreasing the linoleic acid concentration. According to the molecular dynamics simulation and chemical interactions, 7S could be adsorbed at the linoleic acid interface and bind stably, resulting in the decreased ionic and hydrogen bonds but the increased hydrophobic interactions and covalent bonds among proteins in the films.

Highly Efficient Use of Infrared Spectroscopy (ATR-FTIR) to Identify Aphid Species

Aphids are commonly considered to be serious pests for trees, herbaceous and cultivated plants. Recognition and identification of individual species is very difficult and is based mainly on morphological features. The aims of the study were to suggest the possibility of identifying aphids through the use of Fourier-transform infrared (FTIR) spectroscopy, and to determine which absorption peaks are the most useful to separate aphid species. Using FTIR spectroscopy, based on the chemical composition of the body, we were able to distinguish 12 species of aphid. We have shown that using nine distinct peaks corresponding to the molecular vibrations from carbohydrates, lipids, amides I and II, it is possible to accurately identify aphid species with an efficiency of 98%.

Cuticular Lipid Topology on Insect Body Surfaces Studied by Synchrotron Radiation FTIR ATR Microspectroscopy

The cuticular lipid covering the integument of insects is exposed to the environment and involved in a variety of functions offered by insect body surfaces, ranging from protection against the environment, such as the control of water transpiration, the reduction of abrasive damage, and the prevention of pathogen intrusion, to the communication between insects from intraspecific to interspecific interactions. In comparison with the importance of their physiological functions, there is remarkably little information on the structure and physical property of cuticular lipids on insect body surfaces. The lipid layer on the outer exoskeleton is very thin, estimated on the order of 0.01-1 μm or less, and this has led to a lack of practical methodologies for detailed structural analyses. To fill this devoid, we have exploited the characteristics of Fourier transform infrared (FTIR) attenuated total reflection (ATR) spectroscopy, which allows us to conduct a chemical analysis on insect body surfaces and also to investigate depth-dependent structural changes. We have applied a combination of FTIR ATR microspectroscopy with IR radiation provided by a synchrotron facility to obtain in situ two-dimensional (2D) information of the cuticular lipid layer on the surface of the integument. The 2D FTIR spectra measured on the two-spotted cricket and the American cockroach show that the IR bands due to the cuticular lipid, such as CH₂ symmetric and antisymmetric stretch, ν_a(CH₂) and ν_s(CH₂), change in intensity significantly, depending on the location of measurements. As if to keep pace with this, the bands of the amide group for the underlying cuticular layer also change in intensity significantly, although the changes are in the opposite direction; as the lipid bands increase in intensity, the amide band decreases, and vice versa. The ATR spectral analysis, which takes into account the characteristics of the evanescent wave, points out that the lipid layer would vary tens of times in the range of 0.01-1 μm significantly. The ν_a(CH₂) and ν_s(CH₂) bands show frequency shifts, which correlate to some extent with their intensity changes, suggesting that the drastic uneven distribution of the cuticular lipid would be related to the solid-liquid phase separation and also the coarsening of the solid phase domains. The formation of such topological features, significant heterogeneity in the lipid layer thickness, and solid-liquid phase ratios would be accompanied by the partitioning of lipid components according to molecular structures and physicochemical properties. Considering that each lipid component in insect body surface lipids is involved in various physiological roles, the segregation of lipid components during the formation of such heterogeneous structures is thought to have a significant impact on the functionality of the insect body surface.

Mapping of Supramolecular Chirality in Insect Wings by Microscopic Vibrational Circular Dichroism Spectroscopy: Heterogeneity in Protein Distribution

The supramolecular chirality of the hindwing of Anomala albopilosa (male) was investigated using a microscopic vibrational circular dichroism (VCD) system, denoted as MultiD-VCD. The source of intense infrared (IR) light for the system was a quantum cascade laser. Two-dimensional maps of IR and VCD spectra were taken by scanning the surface area (ca. 2 mm × 2 mm) of the insect hindwing tissue. The spectra ranged from 1500 to 1700 cm^-1, and the maps have a spatial resolution of 100 μm. The distribution of proteins, including their supramolecular structures, was analyzed from the location-dependent spectral shape of the VCD bands assigned to amides I and II. The results revealed that the hindwing consists of segregated domains of proteins with different secondary structures: an α-helix (in one part of the membrane), a hybrid of α-helix and β-sheet (in another part of the membrane), and a coil (in a vein).

Influence of Glutaraldehyde's Molecular Transformations on Spectroscopic Investigations of Its Conjugation with Amine-Modified Fe3O4 Microparticles in the Reaction Medium

Glutaraldehyde (GA) is a widely used cross-linking agent in biological research due to its superior characteristics, such as high reactivity toward proteins, high stability, and cost-effectiveness. In this regard, analyzing spectral changes initiated by various molecular forms and transformations of GA in a reaction medium and its reaction with surface functional-modified solid spheres is vital for a successful bioconjugation process targeting the biomolecules of interest. In this work, we present Fourier transform-infrared (FT-IR), Raman, and UV-visible spectroscopic analyses of glutaraldehyde-modified Fe₃O₄ microparticles (magnetic beads) to confirm the conjugation between GA and magnetic beads. We also studied the molecular transformations of glutaraldehyde during the reaction with amine-modified magnetic beads via investigating the reaction medium of the glutaraldehyde solution. Our FT-IR and Raman studies confirmed that glutaraldehyde was successfully coupled on the magnetic beads. Furthermore, FT-IR and UV-vis studies on the glutaraldehyde solution revealed the multiple molecular forms of GA in an aqueous medium, and they also confirmed that glutaraldehyde transforms into other molecular forms while the reaction occurs with the magnetic beads.

First In Situ X-ray Scattering Measurements of Insect Body Surface Lipids: American Cockroach

In situ X-ray scattering measurements of insect body surface lipids were successfully attempted by using a synchrotron X-ray source. The temperature-dependent structural changes of the cuticular hydrocarbons covering the forewing of an American cockroach were able to be followed, which showed that the majority of the hydrocarbons were in a liquid state even far below the critical temperature of water transpiration through the body surface. The results clearly demonstrated that synchrotron radiation X-ray scattering has the potential to obtain the detailed information about the intact lipid structure and physical properties on insect body surfaces.