Polydopamine Nanoparticles Prepared Using Redox-Active Transition Metals

Light harvesting enhancement through band structure engineering in graphite carbon nitride / polydopamine nanocomposite photocatalyst: Addressing persistent organophosphorus pesticide pollution in water systems

Organophosphorus pesticides, particularly profenofos (PF), pose a significant threat to the food supply and human health due to their persistence, toxicity, and resistance to natural breakdown processes. An urgent need exists for an environmentally friendly solution, and photocatalysis emerges as a practical, cost-effective option. However, challenges like poor light responsiveness and difficulties in material separation and reusability persist. To address these issues, we developed a nanocomposite consisting of graphite carbon nitride (g-C3N4) doped with polydopamine (pDA) through a hydrothermal synthesis method. This innovative nanocomposite was employed as a photocatalyst to degrade PF. Various analytical techniques, including UV-DRS, FT-IR, XRD, HR-TEM, and EDAX, were utilized to characterize the synthesized nanocomposite. The strategically modulated band gaps of the nanocomposite enable efficient absorption of UV light, facilitating the robust photocatalytic degradation of PF (96.4%). Our study explored photodegradation using different g-C3N4/pDA catalyst dosages, varied PF concentrations, and pH levels (3, 5, 9, and 11) under UV light. Our findings promise applications in wastewater management, offering an efficient catalyst for PF degradation. This marks a significant stride in addressing challenges related to pesticide pollution in the environment.

Carboxymethyl chitosan dopamine conjugates: Synthesis and evaluation for intranasal anti Parkinson therapy

With respect to the Parkinson's disease (PD), herein, we aimed at synthetizing and characterizing two novel macromolecular conjugates where dopamine (DA) was linked to N,O-carboxymethyl chitosan or O-carboxymethyl chitosan, being both conjugates obtained from an organic solvent free synthetic procedure. They were characterized by FT-IR, 1H NMR spectroscopies, whereas thermal analysis (including Differential Scanning Calorimetry and Thermal Gravimetric Analysis) revealed good stability of the two conjugates after exposure at temperatures close to 300 °C. Release studies in simulated nasal fluid elucidated that a faster release occurred since O-carboxymethyl chitosan-DA conjugate maybe due to the less steric hindrance exerted by the polymeric moiety. The CMCS-DA conjugates prepared in aqueous medium may self-assembly to form polymeric micelles and/or may form polymeric nanoparticles. TEM and Photon correlation spectroscopy lent support for polymeric nanoparticle formation. Moreover, such CMCS-DA conjugates showed antioxidant activity, as demonstrated by DPPH radical scavenging assay. Finally, cytocompatibility studies with neuroblastoma SH-SY5Y cells showed no cytotoxicity of both conjugates, whereas their uptake increased from 2.5 to 24 h and demonstrated in 40-66 % of cells.

Amyloid Fibers Increase Free Radicals of Synthetic Melanin

Functional amyloid fibers are crucial in melanogenesis, but their roles are incompletely understood. In particular, their relationship with intrinsic spin characters of melanin remains unexplored. Here, we show that adding an amyloid scaffold greatly augments the spin density in synthetic melanin. It also brings about concurrent alterations in water dispersibility, bandgaps, and radical scavenging properties of the synthetic melanin, which facilitates its applications in solar water remediation and protection of human keratinocytes from UV irradiation. This work provides implications in the unrevealed role of functional amyloid in melanogenesis and in the origin of the superiority of natural melanin toward its synthetic variants in terms of the spin-related properties.

Carbonized Polydopamine-Based Nanocomposites: The Effect of Transition Metals on the Oxygen Electrocatalytic Activity

The electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are the most critical processes in renewable energy-related technologies, such as fuel cells, water electrolyzers, and unitized regenerative fuel cells. N-doped carbon composites have been demonstrated to be promising ORR/OER catalyst candidates because of their excellent electrical properties, tunable pore structure, and environmental compatibility. In this study, we prepared porous N-doped carbon nanocomposites (NC) by combining mussel-inspired polydopamine (PDA) chemistry and transition metals using a solvothermal carbonization strategy. The complexation between dopamine catechol groups and transition metal ions (Fe, Ni, Co, Zn, Mn, Cu, and Ti) results in hybrid structures with embedded metal nanoparticles converted to metal-NC composites after the carbonization process. The influence of the transition metals on the structural, morphological, and electrochemical properties was analyzed in detail. Among them, Cu, Co, Mn, and Fe N-doped carbon nanocomposites exhibit efficient catalytic activity and excellent stability toward ORR. This method improves the homogeneous distribution of the catalytically active sites. The metal nanoparticles in reduced (MnO, Fe₃C) or metallic (Cu, Co) oxidation states are protected by the N-doped carbon layers, thus further enhancing the ORR performance of the composites. Still, only Co nanocomposite is also effective toward OER with a potential bifunctional gap (ΔE) of 0.867 V. The formation of Co-N active sites during the carbonization process, and the strong coupling between Co nanoparticles and the N-doped carbon layer could promote the formation of defects and the interfacial electron transfer between the catalyst surface, and the reaction intermediates, increasing the bifunctional ORR/OER performance.

Divide and Conquer: A Novel Dual-Layered Hydrogel for Atmospheric Moisture Harvesting

Atmospheric water harvesting (AWH) has been recognized as a next-generation technology to alleviate water shortages in arid areas. However, the current AWH materials suffer from insufficient water adsorption capacity and high-water retention, which hinder the practical application of AWH materials. In this study, we developed a novel dual-layered hydrogel (DLH) composed of a light-to-heat conversion layer (LHL) containing novel polydopamine-manganese nanoparticles (PDA-Mn NPs) and a water adsorption layer (WAL) made of 2-(acryloyloxyethyl) trimethylammonium chloride (AEtMA). The WAL has a strong ability to adsorb water molecules in the air and has a high-water storage capacity, and the PDA-Mn NPs embedded in the LHL have excellent photothermal conversion efficiency, leading to light-induced autonomous water release. As a result, the DLH displays a high-water adsorption capacity of 7.73 g g^-1 under optimal conditions and could near-quantitatively release captured water within 4 h sunlight exposure. Coupled with its low cost, we believed that the DLH will be one of the promising AWH materials for practical applications.

Mussel-inspired nanoparticle composite hydrogels for hemostasis and wound healing

Uncontrolled hemorrhage caused by trauma can easily lead to death. Efficient and safe hemostatic materials are an urgent and increasing need for hemostatic research. Following a trauma, wound healing is induced by various cellular mechanisms and proteins. Hemostatic biomaterials that can not only halt bleeding quickly but also provide an environment to promote wound healing have been the focus of research in recent years. Mussel-inspired nanoparticle composite hydrogels have been propelling the development of hemostatic materials owing to their unique advantages in adhesion, hemostasis, and bacteriostasis. This review summarizes the hemostatic and antimicrobial fundamentals of polydopamine (PDA)-based nanomaterials and emphasizes current developments in hemorrhage-related PDA nanomaterials. Moreover, it briefly discusses safety concerns and clinical application problems with PDA hemostatic nanomaterials.

Synthesis and characterization of Gd3+-loaded hyaluronic acid-polydopamine nanoparticles as a dual contrast agent for CT and MRI scans

Magnetic resonance imaging and computed tomography (CT) suffer from low contrast sensitivity and potential toxicity of contrast agents. To overcome these limitations, we developed and tested a new class of dual contrast agents based on polydopamine nanoparticles (PDA-NPs) that are functionalized and targeted with hyaluronic acid (HA). These nanoparticles (NPs) are chelated with Gd³⁺ to provide suitable contrast. The targeted NPs were characterized through ultraviolet-visible spectroscopy (UV-vis), scanning electron microscopy (SEM), infrared Fourier transform (FTIR), and dynamic light scattering (DLS). The cytotoxicity was investigated on HEK293 cells using an MTT assay. The contrast property of synthesized Gd³⁺/PDA/HA was compared with Barium sulfate and Dotarem, as commercial contrast agents (CAs) for CT and MRI, respectively. The results illustrated that synthesized PDA-NPs have a spherical morphology and an average diameter of 72 nm. A distinct absorption peak around 280 nm in the UV-vis spectrum reported the self-polymerization of PDA-NPs. The HA coating on PDA-NPs was revealed through a shift in the FTIR peak of C=O from 1618 cm^-1 to 1635 cm^-1. The Gd³⁺ adsorption on PDA/HA-NPs was confirmed using an adsorption isotherm assay. The developed CA showed low in vitro toxicity (up to 158.98 µM), and created a similar contrast in MRI and CT when compared to the commercial agents. The r₁ value for PDA/HA/Gd³⁺ (6.5 (mg/ml)^-1 s^-1) was more than Dotarem (5.6 (mg/ml)^-1 s^-1) and the results of the hemolysis test showed that at concentrations of 2, 4, 6, and 10 mg/ml, the hemolysis rate of red blood cells is very low. Additionally, the results demonstrated that PDA/HA/Gd³⁺ could better target the CD₄₄⁺-expressing cancer cells than PDA/Gd³⁺. Thus, it can be concluded that lower doses of developed CA are needed to achieve similar contrast of Dotarem, and the developed CA has no safety concerns in terms of hemolysis. The stability of PDA/HA/Gd³⁺ has also been evaluated by ICP-OES, zeta potential, and DLS during 3 days, and the results suggested that Gd-HA NPs were stable.

Polydopamine-mediated modification of ZIF-8 onto magnetic nanoparticles for enhanced tetracycline adsorption from wastewater

Magnetic nanoparticle materials which could be used to remove tetracycline were confined seriously due to their poor stability and unsatisfactory reusability. Here, we facilely prepared novel zeolitic imidazolate framework-8 (ZIF-8) functionalized magnetic nanoparticles (Fe₃O₄@PDA-ZIF-8) adsorbent utilizing polydopamine as a bond to establish a connection between zeolitic imidazolate framework-8 and Fe₃O₄, which could improve the stability of magnetic nanoparticles and enhance the tetracycline adsorption capacity simultaneously. The prepared nanocomposites were characterized and their TC adsorption abilities under various experiment conditions (contact time, TC initial concentration and pH values) were also investigated. Experimental results proved that the prepared adsorbent showed superior TC adsorption capacities (92.01 mg/g at pH = 7). Further, the adsorption mechanisms were comprehensively studied and the prepared adsorbent showed satisfactory stability and reusability during the cycle experiment. Altogether, our findings provided a feasible way to design and construct functional magnetic MOF materials for enhancing tetracycline adsorption from wastewater.

Core-Shell Polydopamine/Cu Nanometer Rods Efficiently Deactivate Microbes by Mimicking Chloride-Activated Peroxidases

Cu-modified nanoparticles have been designed to mimic peroxidase, and their potent antibacterial and anti-biofilm abilities have been widely investigated. In this study, novel core-shell polydopamine (PDA)/Cu₄(OH)₆SO₄ crystal (PDA/Cu) nanometer rods were prepared. The PDA/Cu nanometer rods show similar kinetic behaviors to chloride-activated peroxidases, exhibit excellent photothermal properties, and are sensitive to the concentrations of pH values and the substrate (i.e., H₂O₂). PDA/Cu nanometer rods could adhere to the bacteria and catalyze hydrogen peroxide (H₂O₂) to generate more reactive hydroxy radicals (^•OH) against Staphylococcus aureus and Escherichia coli, Furthermore, PDA/Cu nanometer rods show enhanced catalytic and photothermal synergistic antibacterial activity. This work provides a simple, inexpensive, and effective strategy for antibacterial applications.

Bioinspired, Ultra-fast Polymerization of Dopamine Under Mild Conditions

Spontaneous oxidative polymerization of dopamine (DA) has been widely exploited as a facile and versatile method for surface modification. However, the reaction is very slow and only occurs in alkaline solutions, which severely limit its applications. Herein we report that the reaction can be dramatically accelerated by using Fe²⁺ as catalyst. While it takes hours and days using conventional method, the Fe²⁺ -catalyzed reaction finishes almost immediately at pH 7.0. In addition, under the catalysis of Fe²⁺ , the reaction can occur at a pH down to 4.0. The fast Fe²⁺ -catalyzed polymerization of DA leads to fast deposition of polydopamine (PDA) coating, thus allowing fast surface modification and textile dyeing. The Fe²⁺ -catalyzed reaction also allows spatial control over the PDA deposition. The fast, simple and mild surface modification method developed here will find applications in numerous fields. This article is protected by copyright. All rights reserved.

Polydopamine Biomaterials for Skin Regeneration

Designing biomaterials capable of biomimicking wound healing and skin regeneration has been receiving increasing attention recently. Some biopolymers behave similarly to the extracellular matrix (ECM), supporting biointerfacial adhesion and intrinsic cellular interactions. Polydopamine (PDA) is a natural bioadhesive and bioactive polymer that endows high chemical versatility, making it an exciting candidate for a wide range of biomedical applications. Moreover, biomaterials based on PDA and its derivatives have near-infrared (NIR) absorption, excellent biocompatibility, intrinsic antioxidative activity, antibacterial activity, and cell affinity. PDA can regulate cell behavior by controlling signal transduction pathways. It governs the focal adhesion behavior of cells at the biomaterials interface. These features make melanin-like PDA a fascinating biomaterial for wound healing and skin regeneration. This paper overviews PDA-based biomaterials' synthesis, properties, and interactions with biological entities. Furthermore, the utilization of PDA nano- and microstructures as a constituent of wound-dressing formulations is highlighted.

Dopamine Photochemical Behaviour under UV Irradiation

To understand the photochemical behaviour of the polydopamine polymer in detail, one would also need to know the behaviour of its building blocks. The electronic absorption, as well as the fluorescence emission and excitation spectra of the dopamine were experimentally and theoretically investigated considering time-resolved fluorescence spectroscopy and first-principles quantum theory methods. The shape of the experimental absorption spectra obtained for different dopamine species with standard, zwitterionic, protonated, and deprotonated geometries was interpreted by considering the advanced equation-of-motion coupled-cluster theory of DLPNO-STEOM. Dynamical properties such as fluorescence lifetimes or quantum yield were also experimentally investigated and compared with theoretically predicted transition rates based on Fermi's Golden Rule-like equation. The results show that the photochemical behaviour of dopamine is strongly dependent on the concentration of dopamine, whereas in the case of a high concentration, the zwitterionic form significantly affects the shape of the spectrum. On the other hand, the solvent pH is also a determining factor for the absorption, but especially for the fluorescence spectrum, where at lower pH (5.5), the protonated and, at higher pH (8.0), the deprotonated forms influence the shape of the spectra. Quantum yield measurements showed that, besides the radiative deactivation mechanism characterized by a relatively small QY value, non-radiative deactivation channels are very important in the relaxation process of the electronic excited states of different dopamine species.

Enhanced photoacoustic imaging in tissue-mimicking phantoms using polydopamine-shelled perfluorocarbon emulsion droplets

The current work features process parameters for the ultrasound (25 kHz)-assisted fabrication of polydopamine-shelled perfluorocarbon (PDA/PFC) emulsion droplets with bimodal (modes at 100-600 nm and 1-6 µm) and unimodal (200-600 nm) size distributions. Initial screening of these materials revealed that only PDA/PFC emulsion droplets with bimodal distributions showed photoacoustic signal enhancement due to large size of their optically absorbing PDA shells. Performance of this particular type of emulsion droplets as photoacoustic agents were evaluated in Intralipid®-India ink media, mimicking the optical scattering and absorbanceof various tissuetypes. From these measurements, it was observed that PDA/PFC droplets with bimodal size distributions can enhance the photoacoustic signal of blood-mimicking phantom by up to five folds in various tissue-mimicking phantoms with absorption coefficients from 0.1 to 1.0 cm^-1. Furthermore, using the information from enhanced photoacoustic images at 750 nm, the ultimate imaging depth was explored for polydopamine-shelled, perfluorohexane (PDA/PFH) emulsion droplets by photon trajectory simulations in 3D using a Monte Carlo approach. Based on these simulations, maximal tissue imaging depths for PDA/PFH emulsion droplets range from 10 to 40 mm, depending on the tissue type. These results demonstrate for the first time that ultrasonically fabricated PDA/PFC emulsion droplets have great potential as photoacoustic imaging agents that can be complemented with other reported characteristics of PDA/PFC emulsion droplets for extended applications in theranostics and other imaging modalities.

Polydopamine nanofilms for high-performance paper-based electrochemical devices

Since the discovery of polydopamine (PDA), there has been a lot of progress on using this substance to functionalize many different surfaces. However, little attention has been given to prepare functionalized surfaces for the preparation of flexible electrochemical paper-based devices. After fabricating the electrodes on paper substrates, we formed PDA on the surface of the working electrode using a chemical polymerization route. PDA nanofilms on carbon were characterized by contact angle (CA) experiments, X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy (topography and electrical measurements) and electrochemical techniques. We observed that PDA introduces chemical functionalities (RNH₂ and RC═O) that decrease the CA of the electrode. Moreover, PDA nanofilms did not block the heterogeneous electron transfer. In fact, we observed one of the highest standard heterogeneous rate constants (k_s ) for electrochemical paper-based electrodes (2.5 ± 0.1) × 10^-3  cm s^-1 , which is an essential parameter to obtain larger currents. In addition, our results suggest that carbonyl functionalities are ascribed for the redox activity of the nanofilms. As a proof-of-concept, the electrooxidation of nicotinamide adenine dinucleotide showed remarkable features, such as, lower oxidation potential, electrocatalytic peak currents more than 30 times higher when compared to unmodified paper-based electrodes and electrocatalytic rate constant (k_obs ) of (8.2 ± 0.6) × 10²  L mol^-1  s^-1 .

Catalytical feature of optical nanoprobes of boron nitride quantum dots in the presence of Cu2+ for the determination of dopamine

Monitoring the concentration of dopamine (DA) is vital for preventing and diagnosing DA related diseases. In contrast to the traditional sensing methods for DA, in which direct or indirect effects on the optical probes are often recorded, a novel sensing concept is disclosed based on as a result of the in situ formation of polydopamine (PDA) originating from the synergetic effect between boron nitride quantum dots (BNQDs) and Cu2+. In the co-presence of BNQDs and Cu2+, DA was catalytically oxidized to PDA, accompanied by an obvious color change from colorless to brown. In contrast to previous reports, in which BNQDs have been employed as an optical probe, herein, the BNQDs not only acted as the optical energy donor, but also as the catalysts for the formation of PDA. The quenching efficiency resulting from the inner filter effect and the electron transfer between the BNQDs and PDA was directly proportional to the concentration of DA, ranging linearly from 2 to 80 μM with a limit of detection of 0.49 μM. The present system exhibited an outstanding selectivity for DA among other interfering coexisting biomolecules. Furthermore, the practical application of the proposed platform was verified by assaying DA in human plasma samples, and satisfactory recoveries ranging from 101.24% to 111.98% were obtained. With the satisfactory reliability, repeatability and stability, the proposed simple sensor showed significant potential for use in DA detection in other biomedical applications.

In situ synthesis of fluorescent polydopamine polymer dots based on Fenton reaction for a multi-sensing platform

The development of fluorescent nanosensors has attracted extensive research interest owing to their superior optoelectronic properties. However, current fluorescent nanoprobes generally involve complicated synthesis processes, background signal disturbance, and limited analyte detection. In this work, a facile and time-saving synthetic strategy for the preparation of green emitting polydopamine polymer dots (PDA-PDs) from dopamine via Fenton reaction at room temperature was proposed for the first time. The obtained PDA-PDs possessed excellent luminescence properties, with a long-wavelength emission of 522 nm, a large Stokes shift of 142 nm, and good photostability against ionic strength and UV irradiation. The formation mechanism of fluorescent PDA-PDs is as follows: in the presence of Fe2+ and H2O2, dopamine could rapidly undergo oxidation to its quinone derivatives and further polymerize to synthesize the fluorescent PDA-PDs with the acceleration of hydroxyl radicals produced from the Fenton reaction. Thus, a versatile turn-on fluorescence sensing method was developed for the detection of multi-analytes (including Fe2+, dopamine, H2O2, and glucose) based on monitoring the intrinsic fluorescence signal of the in situ formation of PDA-PDs. This sensing method could be efficiently applied for the detection of Fe2+, dopamine, and glucose in real human serum samples. Moreover, a three-input AND molecular logic gate based on this sensing platform was designed with the fluorescence signal of PDA-PDs as the gate. Finally, the proposed PDA-PDs could have immense broad prospects in nanomaterials and biosensors.

Utilization of extracellular fungal melanin as an eco-friendly biosorbent for treatment of metal-contaminated effluents

Fungal melanins have been considered as potential biosorbents due to their metal-binding properties, stability, and scalability. Previous studies established scalable fungal melanin production methods with promising strains, however, their applicability for metal-contaminated effluents treatment has not been sufficiently reported. Herein, melanin pigment derived from Amorphotheca resinae was produced and characterized using microscopy and spectroscopy techniques. Adsorptive properties towards Cu(II), Pb(II), Cd(II), and Zn(II) were evaluated using batch tests. Melanin pigment was composed of aggregates of nanosized particles with indole-based constituents. Adsorption capacities increased with the pH of solution, especially at pH > 4.0. Maximum binding capacities of Cu(II), Pb(II), Cd(II), and Zn(II) on melanin were 69.18, 103.23, 24.31, and 13.57 mg/g, respectively. The competitive adsorption experiments elucidated affinity as Cu(II)>Pb(II)≫Cd(II)>Zn(II). Adsorption time generally required <2.5 h to reach equilibrium; the pseudo-second-order kinetic model well described the kinetics. Chelating ability of free radicals in pigment was considered as a possible mechanism for adsorption. Initial adsorption capacities remained almost intact even after 5 consecutive adsorption-desorption cycles. Complete removal of Cu(II), Pb(II), and Cd(II) from metal-contaminated effluent was confirmed. Consequently, melanin pigment derived from A. resinae can be used as a biosorbent suitable for the treatment of metal-contaminated aqueous solutions.

Catalytic Enhancement of Inductively Heated Fe3 O4 Nanoparticles by Removal of Surface Ligands

Heat management in catalysis is limited by each material's heat transfer efficiencies, resulting in energy losses despite current thermal engineering strategies. In contrast, induction heating of magnetic nanoparticles (NPs) generates heat at the surface of the catalyst where the reaction occurs, reducing waste heat via dissipation. However, the synthesis of magnetic NPs with optimal heat generation requires interfacial ligands, such as oleic acid, which act as heat sinks. Surface treatments using tetramethylammonium hydroxide (TMAOH) or pyridine are used to remove these ligands before applications in hydrophilic media. In this study, Fe₃ O₄ NPs are surface treated to study the effect of induction heating on the catalytic oxidation of 1-octanol. Whereas TMAOH was unsuccessful in removing oleic acid, pyridine treatment resulted in a roughly 2.5-fold increase in heat generation and product yield. Therefore, efficient surfactant removal has profound implications in induction heating catalysis by increasing the heat transfer and available surface sites.

Synthesis of mussel-inspired polydopamine-gallium nanoparticles for biomedical applications

Aim: To established a simple, controlled and reproducible method to synthesize gallium (Ga)-coated polydopamine (PDA) nanoparticles (NPs). Materials & methods: PDA NPs were synthesized in alkali medium with posterior Ga shell formation due to ion chelation on the NP surface. Results: The obtained results with energy-dispersive x-ray spectroscopy confirmed the incorporation of Ga on the PDA NP surface. The cytotoxicity of Ga-coated PDA NPs was evaluated in vitro at different concentrations in contact with human adipose-derived stem cells. Further cell analysis also demonstrated the benefit of Ga-coated PDA NPs, which increased the cell proliferation rate compared with noncoated PDA NPs. Conclusion: This study indicated that Ga could work as an appropriate shell for PDA NPs, inducing cell proliferation at the analyzed concentrations.

Polydopamine/Silver Substrates Stemmed from Chiral Silica for SERS Differentiation of Amino Acid Enantiomers

Polydopamine (PDA) and silver (Ag) nanoparticles were first generated on chiral silica nanofibers and then detached from silica to form PDA/Ag composites. The as-obtained PDA/Ag showed surface-enhanced Raman scattering (SERS) activity but very weak circular dichroism optical activity. Interestingly, the PDA/Ag substrates could make a pair of tyrosine (or phenylalanine) enantiomers show different Raman scattering signal intensities, where the differences could reach 3 times. In contrast, PDA/Ag prepared by using racemic or achiral silica did not exhibit such discrimination performance. Therefore, this research offered a novel SERS-based enantiomeric differentiation method with the assistance of plasmonic metal-containing substrates stemmed from intrinsically chiral inorganic silica.

Oxidative Spin-Spray-Assembled Coordinative Multilayers as Platforms for Capacitive Films

The spin-spray-assisted layer-by-layer (LbL) assembly technique was used to prepare coordinative oxidative multilayers from Ce(IV), inorganic polyphosphate (PP), and graphene oxide (GO). The films consist of successive tetralayers and have a general structure (PP/Ce/GO/Ce)n. Such oxidative multilayers have been shown to be a general platform for the electrodeless generation of conducting polymer and melanin-type films. Although the incorporation of GO enhances the film growth, the conventional dip LbL method is very time consuming. We show that the spin-spray method reduces the time required to grow thick multilayers by the order of magnitude and the film growth is linear from the beginning, which implies a stratified structure. We have deposited poly(3,4-ethylenedioxothiophene), PEDOT, on the oxidative multilayers and studied these redox-active films as models for melanin-type capacitive layers for supercapacitors to be used in biodegradable electronics, both before and after the electrochemical reduction of GO to rGO. The amount of oxidant and PEDOT scales linearly with the film thickness, and the charge transfer kinetics is not mass transfer-limited, especially after the reduction of GO. The areal capacitance of the films grows linearly with the film thickness, reaching a value of ca. 1.6 mF cm-2 with 20 tetralayers, and the specific volumetric (per film volume) and mass (per mass of PEDOT) capacitances are ca. 130 F cm-3 and 65 F g-1, respectively. 5,6-Dihydroxyindole can also be polymerized to a redox-active melanin-type film on these oxidative multilayers, with even higher areal capacitance values.

Polydopamine as a stable and functional nanomaterial

The mussel inspired chemistry of dopamine leading to versatile coatings on the surface of all kinds of materials in a one pot process was considered as the unique aspect of catecholamine for a long time. Only recently, research has been undertaken to valorize the simultaneous oxidation and colloid formation in dopamine solutions in the presence of an oxidant. This mini review summarizes the synthesis methods allowing to get controlled nanomaterials, either nanoparticles, hollow capsules or nanotubes and even chiral nanomaterials from dopamine solutions. Finally the applications of those nanomaterials will be described.