Edge Disorder in Bottom-Up Zigzag Graphene Nanoribbons: Implications for Magnetism and Quantum Electronic Transport

Dissipationless edge transport in single-layer topological insulator Bi4Br4based device under high vacancy concentration

Single-layer Bismuth Monobromide (SL-Bi4Br4) is a recently experimentally confirmed room temperature quantum spin hall insulator with a relatively large bulk band gap. In this paper, we investigate the electronic properties of SL-Bi4Br4and single-layer bismuth monobromide nanoribbon (SL-Bi4Br4NR) introducing different vacancy defects near the nanoribbon edges. With maximally localized wannier function (MLWF) constructed Hamiltonian we show that SL-Bi4Br4NR edge states are protected by bulk topology and robust against disorder. In conjunction with MLWF and non-equilibrium Green's function, we also show that in devices made from SL-Bi4Br4, transmission through the topologically protected edge states do not suffer from degradation when the device is sufficiently wide. Increasing channel length and defect concentration affect only the bulk states transmission leaving edge states transmission perfectly quantized. This resilience against disorder signifies SL-Bi4Br4's promising candidacy for next-generation electronic & spintronics devices application.

One-Dimensional Magnetic Conduction Channels across Zigzag Graphene Nanoribbon/Hexagonal Boron Nitride Heterojunctions

We examine the electronic structure of recently fabricated in-plane heterojunctions of zigzag graphene nanoribbons embedded in hexagonal boron nitride. We focus on hitherto unexplored interface configurations in which both edges of the nanoribbon are bonded to the same chemical species, either boron or nitrogen atoms. Using ab initio and mean-field Hubbard model calculations, we reveal the emergence of one-dimensional magnetic conducting channels at these interfaces. These channels originate from the energy shift of the magnetic interface states that is induced by charge transfer between the nanoribbon and hexagonal boron nitride. We further address the response of these heterojunctions to external electric and magnetic fields, demonstrating the tunability of energy and spin splittings in the electronic structure. Our findings establish that zigzag graphene nanoribbon/hexagonal boron nitride heterojunctions are a suitable platform for exploring and engineering spin transport in the atomically thin limit, with potential applications in integrated spintronic devices.

Dirac Half-Semimetallicity and Antiferromagnetism in Graphene Nanoribbon/Hexagonal Boron Nitride Heterojunctions

Half-metals have been envisioned as active components in spintronic devices by virtue of their completely spin-polarized electrical currents. Actual materials hosting half-metallic phases, however, remain scarce. Here, we predict that recently fabricated heterojunctions of zigzag nanoribbons embedded in two-dimensional hexagonal boron nitride are half-semimetallic, featuring fully spin-polarized Dirac points at the Fermi level. The half-semimetallicity originates from the transfer of charges from hexagonal boron nitride to the embedded graphene nanoribbon. These charges give rise to opposite energy shifts of the states residing at the two edges, while preserving their intrinsic antiferromagnetic exchange coupling. Upon doping, an antiferromagnetic-to-ferrimagnetic phase transition occurs in these heterojunctions, with the sign of the excess charge controlling the spatial localization of the net magnetic moments. Our findings demonstrate that such heterojunctions realize tunable one-dimensional conducting channels of spin-polarized Dirac fermions seamlessly integrated into a two-dimensional insulator, thus holding promise for the development of carbon-based spintronics.

Examining the Long-Range Effect in Very Long Graphene Nanoribbons: A First-Principles Study

The role of long-range effect on the modulation of the electronic structure of graphene nanoribbons has been little studied due to the limitations of existing theoretical and computational methods. By splitting a molecule top-down and calculating and jointing the Fock matrix of fragments, we developed a computational method suitable for large-size molecules with random doping and arbitrary geometry. Utilizing this method, we achieved the study of the effects of dopants and curvature on graphene nanoribbons (GNRs). It reveals that both dopants and curvature can change the charge distribution of GNRs, while the influence of dopants is more significant and can extend up to 1-3 nm. The electronic excitation properties of GNRs are also largely modified by the doping state or nonuniform curvature. Our findings provide not only a feasible approach for studying the electronic structure of large-size molecules but also the possibility to improve the properties of graphene-based materials by dopants and local curvature.

Carbon-based nanostructures as a versatile platform for tunableπ-magnetism

Emergence ofπ-magnetism in open-shell nanographenes has been theoretically predicted decades ago but their experimental characterization was elusive due to the strong chemical reactivity that makes their synthesis and stabilization difficult. In recent years, on-surface synthesis under vacuum conditions has provided unprecedented opportunities for atomically precise engineering of nanographenes, which in combination with scanning probe techniques have led to a substantial progress in our capabilities to realize localized electron spin states and to control electron spin interactions at the atomic scale. Here we review the essential concepts and the remarkable advances in the last few years, and outline the versatility of carbon-basedπ-magnetic materials as an interesting platform for applications in spintronics and quantum technologies.

Electronic, transport, magnetic and optical properties of graphene nanoribbons review

Low dimensional materials have attracted great research interest from both theoretical and experimental point of view. These materials exhibit novel physical and chemical properties due to the confinement effect in low dimensions. The experimental observations of graphene open a new platform to study the physical properties of materials restricted to two dimensions. This featured article provides a review on the novel properties of quasi one-dimensional (1D) material known as graphene nanoribbon. Graphene nanoribbons can be obtained by unzipping carbon nanotubes (CNTs) or cutting the graphene sheet. Alternatively, it is also called the finite termination of graphene edges. It gives rise different edge geometries namely zigzag and armchair among others. There are various physical and chemical techniques to realize these materials. Depending on the edge type termination, these are called the zigzag and armchair graphene nanoribbons (ZGNR and AGNR). These edges play an important role in controlling the properties of graphene nanoribbons. The present review article provides an overview of the electronic, transport, optical and magnetic properties of graphene nanoribbons. However, there are different ways to tune these properties for device applications. Here, some of them are highlighted such as external perturbations and chemical modifications. Few applications of graphene nanoribbon have and chemical modifications. Few applications of graphene nanoribbon have also been briefly discussed.

Nanographenes and Graphene Nanoribbons as Multitalents of Present and Future Materials Science

As cut-outs from a graphene sheet, nanographenes (NGs) and graphene nanoribbons (GNRs) are ideal cases with which to connect the world of molecules with that of bulk carbon materials. While various top-down approaches have been developed to produce such nanostructures in high yields, in the present perspective, precision structural control is emphasized for the length, width, and edge structures of NGs and GNRs achieved by modern solution and on-surface syntheses. Their structural possibilities have been further extended from "flatland" to the three-dimensional world, where chirality and handedness are the jewels in the crown. In addition to properties exhibited at the molecular level, self-assembly and thin-film structures cannot be neglected, which emphasizes the importance of processing techniques. With the rich toolkit of chemistry in hand, NGs and GNRs can be endowed with versatile properties and functions ranging from stimulated emission to spintronics and from bioimaging to energy storage, thus demonstrating their multitalents in present and future materials science.

In silico design of graphene plasmonic hot-spots

We propose a route for the rational design of engineered graphene-based nanostructures, which feature enormously enhanced electric fields in their proximity. Geometrical arrangements are inspired by nanopatterns allowing single molecule detection on noble metal substrates, and are conceived to take into account experimental feasibility and ease in fabrication processes. The attention is especially focused on enhancement effects occurring close to edge defects and grain boundaries, which are usually present in graphene samples. There, very localized hot-spots are created, with enhancement factors comparable to noble metal substrates, thus potentially paving the way for single molecule detection from graphene-based substrates.

Hydrogen Atoms on Zigzag Graphene Nanoribbons: Chemistry and Magnetism Meet at the Edge

Although the unconventional π-magnetism at the zigzag edges of graphene holds promise for a wide array of applications, whether and to what degree it plays a role in their chemistry remains poorly understood. Here, we investigate the addition of a hydrogen atom─the simplest yet the most experimentally relevant adsorbate─to zigzag graphene nanoribbons (ZGNRs). We show that the π-magnetism governs the chemistry of ZGNRs, giving rise to a site-dependent reactivity of the carbon atoms and driving the hydrogenation process to the nanoribbon edges. Conversely, the chemisorbed hydrogen atom governs the π-magnetism of ZGNRs, acting as a spin-1/2 paramagnetic center in the otherwise antiferromagnetic ground state and spin-polarizing the charge carriers at the band extrema. Our findings establish a comprehensive picture of the peculiar interplay between chemistry and magnetism that emerges at the zigzag edges of graphene.

Hybrid Films Based on Bilayer Graphene and Single-Walled Carbon Nanotubes: Simulation of Atomic Structure and Study of Electrically Conductive Properties

One of the urgent problems of materials science is the search for the optimal combination of graphene modifications and carbon nanotubes (CNTs) for the formation of layered hybrid material with specified physical properties. High electrical conductivity and stability are one of the main optimality criteria for a graphene/CNT hybrid structure. This paper presents results of a theoretical and computational study of the peculiarities of the atomic structure and the regularities of current flow in hybrid films based on single-walled carbon nanotubes (SWCNTs) with a diameter of 1.2 nm and bilayer zigzag graphene nanoribbons, where the layers are shifted relative to the other. It is found that the maximum stresses on atoms of hybrid film do not exceed ~0.46 GPa for all considered topological models. It is shown that the electrical conductivity anisotropy takes place in graphene/SWCNT hybrid films at a graphene nanoribbon width of 4 hexagons. In the direction along the extended edge of the graphene nanoribbon, the electrical resistance of graphene/SWCNT hybrid film reaches ~125 kOhm; in the direction along the nanotube axis, the electrical resistance is about 16 kOhm. The prospects for the use of graphene/SWCNT hybrid films in electronics are predicted based on the obtained results.