Time-Resolved Vibrational and Electronic Spectroscopy for Understanding How Charges Drive Metal Oxide Catalysts for Water Oxidation

Rapid Wide-Field Correlative Mapping of Electronic and Vibrational Ultrafast Dynamics in Solids

Coupling between electronic and vibrational degrees of freedom in solids is responsible for many fundamental material properties, including superconductivity, ferroelectricity, high thermal conductivity, and indirect bandgap emission among many others. In heterogeneous materials electronic-vibrational coupling gives rise to spatial correlations between the electronic relaxation properties and vibrational dynamics. Visualizing and mapping these correlations may lead to important physical insights for applications that include electronics, optoelectronics, and energy technologies. However, due to the vastly different energy scales involved, measuring and correlating electronic and vibrational properties is challenging. While in principle, ultrafast pulses with sufficient bandwidth generate excited-state population and vibrational coherence signatures, the need to measure the signal point-by-point across the sample results in relatively slow acquisition, leading to an increased risk of sample photodamage and rendering the measurements highly susceptible to noise. Here, we introduce Parallel Rapid Imaging with Spectroscopic Mapping (PRISM), an ultrafast, wide-field, and coherent imaging technique, that allowed for the simultaneous acquisition of electronic state decay in the 0-10 ps range and vibrational spectra in the structurally sensitive low-frequency 5-600 cm-1 range. The exceptionally high speed of PRISM, exceeding 1.6 million time-resolved traces per second, enabled the mapping of electronic and vibrational properties across 80,000 pixels simultaneously in few-layer tungsten diselenide and perovskite materials. Correlations between the population and coherence maps reveal spatial heterogeneity not observed by either measurement alone. The ability to map electronic-vibrational coupling makes PRISM particularly well-suited for fundamental studies of complex solids and a wide range of materials applications.

Temperature-Dependent Water Oxidation Kinetics: Implications and Insights

As a vital process for solar fuel synthesis, water oxidation remains a challenging reaction to perform using durable and cost-effective systems. Despite decades of intense research, our understanding of the detailed processes involved is still limited, particularly under photochemical conditions. Recent research has shown that the overall kinetics of water oxidation by a molecular dyad depends on the coordination between photocharge generation and the subsequent chemical steps. This work explores similar effects of heterogeneous solar water oxidation systems. By varying a key variable, the reaction temperature, we discovered distinctly different behaviors on two model systems, TiO2 and Fe2O3. TiO2 exhibited a monotonically increasing water oxidation performance with rising temperature across the entire applied potential range, between 0.1 and 1.5 V vs the reversible hydrogen electrode (RHE). In contrast, Fe2O3 showed increased performance with increasing temperature at high applied potentials (>1.2 V vs RHE) but decreased performance at low applied potentials (<1.2 V vs RHE). This decrease in performance with temperature on Fe2O3 was attributed to an increased level of electron-hole recombination, as confirmed by intensity-modulated photocurrent spectroscopy (IMPS). The origin of the differing temperature dependences on TiO2 and Fe2O3 was further ascribed to their different surface chemical kinetics. These results highlight the chemical nature of charge recombination in photoelectrochemical (PEC) systems, where surface electrons recombine with holes stored in surface chemical species. They also indicate that PEC kinetics are not constrained by a single rate-determining chemical step, highlighting the importance of an integrated approach to studying such systems. Moreover, the results suggest that for practical solar water splitting devices higher temperatures are not always beneficial for reaction rates, especially under low driving force conditions.

Integration of conventional surface science techniques with surface-sensitive azimuthal and polarization dependent femtosecond-resolved sum frequency generation spectroscopy

Experimental insight into the elementary processes underlying charge transfer across interfaces has blossomed with the wide-spread availability of ultra-high vacuum (UHV) setups that allow the preparation and characterization of solid surfaces with well-defined molecular adsorbates over a wide range of temperatures. Within the last 15 years, such insights have extended to charge transfer heterostructures containing solids overlain by one or more atomically thin two dimensional materials. Such systems are of wide potential interest both because they appear to offer a path to separate surface reactivity from bulk chemical properties and because some offer completely novel physics, unrealizable in bulk three dimensional solids. Thick layers of molecular adsorbates or heterostructures of 2D materials generally preclude the use of electrons or atoms as probes. However, with linear photon-in/photon-out techniques, it is often challenging to assign the observed optical response to a particular portion of the interface. We and prior workers have demonstrated that by full characterization of the symmetry of the second order nonlinear optical susceptibility, i.e., the χ(2), in sum frequency generation (SFG) spectroscopy, this problem can be overcome. Here, we describe an UHV system built to allow conventional UHV sample preparation and characterization, femtosecond and polarization resolved SFG spectroscopy, the azimuthal sample rotation necessary to fully describe χ(2) symmetry, and sufficient stability to allow scanning SFG microscopy. We demonstrate these capabilities in proof-of-principle measurements on CO adsorbed on Pt(111) and on the clean Ag(111) surface. Because this setup allows both full characterization of the nonlinear susceptibility and the temperature control and sample preparation/characterization of conventional UHV setups, we expect it to be of great utility in the investigation of both the basic physics and applications of solid, 2D material heterostructures.

Cooperative Effects Drive Water Oxidation Catalysis in Cobalt Electrocatalysts through the Destabilization of Intermediates

A barrier to understanding the factors driving catalysis in the oxygen evolution reaction (OER) is understanding multiple overlapping redox transitions in the OER catalysts. The complexity of these transitions obscure the relationship between the coverage of adsorbates and OER kinetics, leading to an experimental challenge in measuring activity descriptors, such as binding energies, as well as adsorbate interactions, which may destabilize intermediates and modulate their binding energies. Herein, we utilize a newly designed optical spectroelectrochemistry system to measure these phenomena in order to contrast the behavior of two electrocatalysts, cobalt oxyhydroxide (CoOOH) and cobalt-iron hexacyanoferrate (cobalt-iron Prussian blue, CoFe-PB). Three distinct optical spectra are observed in each catalyst, corresponding to three separate redox transitions, the last of which we show to be active for the OER using time-resolved spectroscopy and electrochemical mass spectroscopy. By combining predictions from density functional theory with parameters obtained from electroadsorption isotherms, we demonstrate that a destabilization of catalytic intermediates occurs with increasing coverage. In CoOOH, a strong (∼0.34 eV/monolayer) destabilization of a strongly bound catalytic intermediate is observed, leading to a potential offset between the accumulation of the intermediate and measurable O2 evolution. We contrast these data to CoFe-PB, where catalytic intermediate generation and O2 evolution onset coincide due to weaker binding and destabilization (∼0.19 eV/monolayer). By considering a correlation between activation energy and binding strength, we suggest that such adsorbate driven destabilization may account for a significant fraction of the observed OER catalytic activity in both materials. Finally, we disentangle the effects of adsorbate interactions on state coverages and kinetics to show how adsorbate interactions determine the observed Tafel slopes. Crucially, the case of CoFe-PB shows that, even where interactions are weaker, adsorption remains non-Nernstian, which strongly influences the observed Tafel slope.

Nanostructured Black Silicon as a Stable and Surface-Sensitive Platform for Time-Resolved In Situ Electrochemical Infrared Absorption Spectroscopy

Attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) is a powerful method for probing interfacial chemical processes. However, SEIRAS-active nanostructured metallic thin films for the in situ analysis of electrochemical phenomena are often unstable under biased aqueous conditions. In this work, we present a surface-enhancing structure based on etched black Si internal reflection elements with Au-coatings for in situ electrochemical ATR-SEIRAS. Using electrochemical potential-dependent adsorption and desorption of 4-methoxypyridine on Au, we demonstrate that black Si-based substrates offer advantages over commonly used structures, such as electroless-deposited Au on Si and electrodeposited Au on ITO-coated Si, due to the combination of high stability, sensitivity, and conductivity. These characteristics are especially valuable for time-resolved measurements where stable substrates are required over extended times. Furthermore, the low sheet resistance of Au layers on black Si reduces the RC time constant of the electrochemical cell, enabling a significantly higher time resolution compared to that of traditional substrates. Thus, we employ black Si-based substrates in conjunction with rapid- and step-scan Fourier transform infrared (FTIR) spectroscopy to investigate the adsorption and desorption kinetics of 4-methoxypyridine during in situ electrochemical potential steps. Adsorption is shown to be diffusion-limited, which allows for the determination of the mean molecular area in a fully established monolayer. Moreover, no significant changes in the peak ratios of vibrational modes with different orientations relative to the molecular axis are observed, suggesting a single adsorption mode and no alteration of the average molecular orientation during the adsorption process. Overall, this study highlights the enhanced performance of black Si-based substrates for both steady-state and time-resolved in situ electrochemical ATR-SEIRAS, providing a powerful platform for kinetic and mechanistic investigations of electrochemical interfaces.

Unveiling the Hidden Energy Profiles of the Oxygen Evolution Reaction via Machine Learning Analyses

The oxygen evolution reaction (OER) is a crucial electrochemical process for hydrogen production in water electrolysis. However, due to the involvement of multiple proton-coupled electron transfer steps, it is challenging to identify the specific elementary reaction that limits the rate of the OER. Here we employed a machine-learning-based approach to extract the reaction pathway exhaustively from experimental data. Genetic algorithms were applied to search for thermodynamic and kinetic parameters using the current-electrochemical potential relationship of the OER. Interestingly, analysis of the datasets revealed the energy state distributions of reaction intermediates, which likely originated in the interactions among intermediates or the distribution of multiple sites. Through our exhaustive analyses, we successfully uncovered the hidden energy profiles of the OER. This approach can reveal the reaction pathway to activate for efficient hydrogen production, which facilitates the design of catalysts.

A High-Entropy Oxide as High-Activity Electrocatalyst for Water Oxidation

High-entropy materials are an emerging pathway in the development of high-activity (electro)catalysts because of the inherent tunability and coexistence of multiple potential active sites, which may lead to earth-abundant catalyst materials for energy-efficient electrochemical energy storage. In this report, we identify how the multication composition in high-entropy perovskite oxides (HEO) contributes to high catalytic activity for the oxygen evolution reaction (OER), i.e., the key kinetically limiting half-reaction in several electrochemical energy conversion technologies, including green hydrogen generation. We compare the activity of the (001) facet of LaCr_0.2Mn_0.2Fe_0.2Co_0.2Ni_0.2O_3-δ with the parent compounds (single B-site in the ABO₃ perovskite). While the single B-site perovskites roughly follow the expected volcano-type activity trends, the HEO clearly outperforms all of its parent compounds with 17 to 680 times higher currents at a fixed overpotential. As all samples were grown as an epitaxial layer, our results indicate an intrinsic composition-function relationship, avoiding the effects of complex geometries or unknown surface composition. In-depth X-ray photoemission studies reveal a synergistic effect of simultaneous oxidation and reduction of different transition metal cations during the adsorption of reaction intermediates. The surprisingly high OER activity demonstrates that HEOs are a highly attractive, earth-abundant material class for high-activity OER electrocatalysts, possibly allowing the activity to be fine-tuned beyond the scaling limits of mono- or bimetallic oxides.