PtRuFe/Carbon Nanotube Composites as Bifunctional Catalysts for Efficient Methanol Oxidation and Oxygen Reduction

Alkali-Free Oxidation of 1,2-Propanediol to Lactic Acid over Intermetallic Cu1Pt Compounds

Polylactic acid (PLA) plastics are the most popular biodegradable and biocompatible materials; however, their monomer, lactic acid (LA), is currently produced via an inefficient fermentation process. Herein, activated carbon-supported Pt-Cu intermetallic compounds were synthesized and utilized in the selective oxidation of 1,2-propanediol (1,2-PDO) toward LA without the participation of homogeneous alkali or a basic support. It was found that rhombohedral intermetallic Cu1Pt compounds exhibited excellent performance and the calculated turnover frequency of each surface Pt atom reached 10 049 h-1. The yield of free LA reached 64.6% with a complete conversion of 1,2-PDO at 100 °C within 2 h. Diverse characterization and DFT calculations revealed that Pt-Cu intermetallic compounds were active for the adsorption and/or activation of molecular oxygen and 1,2-PDO. Raman analysis of adsorbed 1,2-PDO further disclosed that 1,2-PDO contacted with rhombohedral intermetallic Cu1Pt compounds strongly, and then the oxidation of the terminal hydroxyl group was performed preferentially, which promoted the formation of LA.

Crystalline-Amorphous Heterophase PdMoCrW Tetrametallene: Highly Efficient Oxygen Reduction Electrocatalysts for a Long-Term Zn-Air Battery

Metallenes have received sustained attention owing to their unique microstructure characteristics and compelling catalytic applications, but the synthesis of multielement crystalline-amorphous metallenes remains a formidable challenge. Herein, we report a one-step wet chemical reduction method to synthesize composition-tunable crystalline-amorphous heterophase PdMoCrW tetrametallene. As-synthesized PdMoCrW tetrametallene is composed of approximately six to seven atomic layers and has flexible crimpiness, a crystalline-amorphous heterophase structure, and high-valence metal species. Time-dependent experiments show that PdMoCrW tetrametallene follows a three-step growth mechanism that includes nucleation, lateral growth, and atom diffusion, respectively. The novel ultrathin structure, optimized Pd electronic structure, and hydrophilic surface together greatly promote the activity and stability of PdMoCrW tetrametallene in the alkaline oxygen reduction reaction. Pd75.9Mo9.4Cr8.9W5.8/C exhibits excellent mass and specific activities of 2.81 A mgPd-1 and 4.05 mA cm-2, which are 20.07/14.46 and 23.42/16.20 times higher than those of commercial Pt/C and Pd/C, respectively. Furthermore, a Zn-air battery assembled using Pd75.9Mo9.4Cr8.9W5.8/C as a cathode catalyst achieves a peak power density of 156 mW cm-2 and an ultralong durability of 329 h. This study reports an effective strategy for constructing crystalline-amorphous quaternary metallenes to advance non-Pt electrocatalysts toward oxygen reduction reaction (ORR) performance and for a Zn-air battery.

Electronic Structure Effect of PtCo Alloy with Adjustable Compositions for Efficient Methanol Electrooxidation

Various efficient strategies have been developed to overcome the anodic electrocatalyst issue of methanol-based fuel cells owing to their complicated methanol electrooxidation mechanism. In this work, PtCo nanoparticles with adjustable compositions supported on multiwalled carbon nanotubes (Pt1Cox/MWCNTs) through the adsorbing-coating-annealing-etching route were synthesized. Compared with the Pt/C catalyst, Pt1Co3/MWCNTs exhibit better electrocatalytic MOR activity in both activity and durability. Notably, the electrochemical mass and specific activity of the as-prepared catalyst are 1.04 mA μg-1Pt and 2.18 mA cm-2, respectively, which are higher than those of the Pt/C catalyst. Moreover, the as-prepared sample revealed lower onset potential during the CO stripping test. Furthermore, the Pt1Co3/MWCNTs possess a lower current density decrease rate in chronoamperometry and cyclic durability tests. The enhancement of activity and stability of Pt1Co3/MWCNTs could be ascribed to their ordered morphological structure, the electronic interaction between MWCNTs and PtCo nanoparticles, and the suitable electronic structure effect between Pt/Co ratios. The concept of the catalyst design in this study offers a different guideline for constructing the novel methanol electrooxidation catalyst, which will accelerate the widespread fuel cell practical application.

Catalyst Development for High-Temperature Polymer Electrolyte Membrane Fuel Cell (HT-PEMFC) Applications

A constant increase in global emission standard is causing fuel cell (FC) technology to gain importance. Over the last two decades, a great deal of research has been focused on developing more active catalysts to boost the performance of high-temperature polymer electrolyte membrane fuel cells (HT-PEMFC), as well as their durability. Due to material degradation at high-temperature conditions, catalyst design becomes challenging. Two main approaches are suggested: (i) alloying platinum (Pt) with low-cost transition metals to reduce Pt usage, and (ii) developing novel catalyst support that anchor metal particles more efficiently while inhibiting corrosion phenomena. In this comprehensive review, the most recent platinum group metal (PGM) and platinum group metal free (PGM-free) catalyst development is detailed, as well as the development of alternative carbon (C) supports for HT-PEMFCs.