Surface Modification of Polymers by Reaction of Alkyl Radicals

D, Decorse P, Pinson J, Podvorica FI. Surface Modification of Lignite with Alkyl and Mixed Alkyl-Aryl Films Generated from an Aryl Diazonium Salt and Alkyl Halides: Experimental Results and Theoretical Analyses

In search of new possible uses of cheap lignite from the Kosova Bassin, the surface of lignite powders is modified with alkyl or mixed alkyl-aryl layers. Modification is performed in aqueous acid solution containing an aryl diazonium salt and an alkyl halide compound in millimolar concentration, in the presence of potassium iodide as a reducing agent at equimolar concentration. Attachment of alkyl films substituted with carboxylic groups and aryl films with nitro or bis-trifluoromethyl groups is characterized by IRATR and XPS spectroscopy. The formation of a stable interface during the grafting reactions of alkyl and aryl moieties with lignite surface has been confirmed by theoretical calculations. Aryl diazonium salts once chemically or spontaneously reduced are a source of aryl radicals, able to attach chemically to the material surface or to react with alkyl halides by abstracting the halogen atom. If the aryl diazonium salts are unable to graft to the coal surface due to steric hindrance, they can, nevertheless, abstract an iodine or bromine atom to generate alkyl radicals that react with the material surface.

Functionalized Electrospun Scaffold-Human-Muscle-Derived Stem Cell Construct Promotes In Vivo Neocartilage Formation

Polycaprolactone (PCL) is a non-cytotoxic, completely biodegradable biomaterial, ideal for cartilage tissue engineering. Despite drawbacks such as low hydrophilicity and lack of functional groups necessary for incorporating growth factors, it provides a proper environment for different cells, including stem cells. In our study, we aimed to improve properties of scaffolds for better cell adherence and cartilage regeneration. Thus, electrospun PCL–scaffolds were functionalized with ozone and loaded with TGF-β3. Together, human-muscle-derived stem cells (hMDSCs) were isolated and assessed for their phenotype and potential to differentiate into specific lineages. Then, hMDSCs were seeded on ozonated (O) and non-ozonated (“naïve” (NO)) scaffolds with or without protein and submitted for in vitro and in vivo experiments. In vitro studies showed that hMDSC and control cells (human chondrocyte) could be tracked for at least 14 days. We observed better proliferation of hMDSCs in O scaffolds compared to NO scaffolds from day 7 to day 28. Protein analysis revealed slightly higher expression of type II collagen (Coll2) on O scaffolds compared to NO on days 21 and 28. We detected more pronounced formation of glycosaminoglycans in the O scaffolds containing TGF-β3 and hMDSC compared to NO and scaffolds without TGF-β3 in in vivo animal experiments. Coll2-positive extracellular matrix was observed within O and NO scaffolds containing TGF-β3 and hMDSC for up to 8 weeks after implantation. These findings suggest that ozone-treated, TGF-β3-loaded scaffold with hMDSC is a promising tool in neocartilage formation.

Challenges, Prospects, and Emerging Applications of Inkjet-Printed Electronics: A Chemist's Point of View

Driven by the development of new functional inks, inkjet-printed electronics has achieved several milestones upon moving from the integration of simple electronic elements (e.g., temperature and pressure sensors, RFID antennas, etc.) to high-tech applications (e.g. in optoelectronics, energy storage and harvesting, medical diagnosis). Currently, inkjet printing techniques are limited by spatial resolution higher than several micrometers, which sets a redhibitorythreshold for miniaturization and for many applications that require the controlled organization of constituents at the nanometer scale. In this Review, we present the physico-chemical concepts and the equipment constraints underpinning the resolution limit of inkjet printing and describe the contributions from molecular, supramolecular, and nanomaterials-based approaches for their circumvention. Based on these considerations, we propose future trajectories for improving inkjet-printing resolution that will be driven and supported by breakthroughs coming from chemistry. Please check all text carefully as extensive language polishing was necessary. Title ok? Yes.

Direct vs Indirect Grafting of Alkyl and Aryl Halides

The direct and indirect electrochemical grafting of alkyl and aryl halides (RX, ArX) on carbon, metal and polymer surfaces is examined. Their electrochemical reduction occurs at highly negative potential in organic solvents and very often produces carbanions because the reduction potentials of RX and ArX are more negative than those of their corresponding radicals. Therefore, direct electrografting of alkyl and aryl radicals generated from RX and ArX is not easy to perform. This obstacle is overcome using aryl radicals derived from the 2,6-dimethylbenzenediazonium salt (2,6-DMBD), which do not react on the electrode surface due to their steric hindrance but react in solution by abstracting an iodine or bromine atom from RX (X=I, Br) or ArI to give alkyl or aryl radicals. As a consequence, alkyl and aryl radicals are generated at very low driving force by diverting the reactivity of aryl radicals derived from an aryl diazonium salt; they attack the electrode surface and form strongly attached organic layers. This strategy applies to the chemical modification of polymers (polyethylene, polymethylmethacrylate) by alkyl halides under heating.

Continuous Synthesis of Nanocrystals via Flow Chemistry Technology

Modern nanotechnologies bring humanity to a new age, and advanced methods for preparing functional nanocrystals are cornerstones. A considerable variety of nanomaterials has been created over the past decades, but few were prepared on the macro scale, even fewer making it to the stage of industrial production. The gap between academic research and engineering production is expected to be filled by flow chemistry technology, which relies on microreactors. Microreaction devices and technologies for synthesizing different kinds of nanocrystals are discussed from an engineering point of view. The advantages of microreactors, the important features of flow chemistry systems, and methods to apply them in the syntheses of salt, oxide, metal, alloy, and quantum dot nanomaterials are summarized. To further exhibit the scaling-up of nanocrystal synthesis, recent reports on using microreactors with gram per hour and larger production rates are highlighted. Finally, an industrial example for preparing 10 tons of CaCO₃ nanoparticles per day is introduced, which shows the great potential for flow chemistry processes to transfer lab research to industry.

Simultaneous bioconversion of lignocellulosic residues and oxodegradable polyethylene by Pleurotus ostreatus for biochar production, enriched with phosphate solubilizing bacteria for agricultural use

A simultaneous treatment of lignocellulosic biomass (LCB) and low density oxodegradable polyethylene (LDPE_oxo) was carried-out using Pleurotus ostreatus at microcosm scale to obtain biotransformed plastic and oxidized lignocellulosic biomass. This product was used as raw matter (RM) to produce biochar enriched with phosphate solubilizing bacteria (PSB). Biochar potential as biofertilizer was evaluated in Allium cepa culture at greenhouse scale. Experiments including lignocellulosic mix and LDPE_oxo were performed for 75 days in microcosm. Biotransformation progress was performed by monitoring total organic carbon (TOC), CO₂ production, laccase (Lac), manganese peroxidase (MnP), and lignin peroxidase (LiP) enzymatic activities. Physical LDPE_oxo changes were assessed by atomic force microscopy (AFM), scanning electron microscopy (SEM) and static contact angle (SCA) and chemical changes by Fourier transform infrared spectroscopy (FTIR). Results revealed P. ostreatus was capable of LCB and LDPE_oxo biotransformation, obtaining 41% total organic carbon (TOC) removal with CO₂ production of 2,323 mg Kg^-1 and enzyme activities of 169,438 UKg^-1, 5,535 UKg^-1 and 5,267 UKg^-1 for LiP, MnP and Lac, respectively. Regarding LDPE_oxo, SCA was decreased by 84%, with an increase in signals at 1,076 cm^-1 and 3,271 cm^-1, corresponding to C-O and CO-H bonds. A decrease in signals was observed related to material degradation at 2,928 cm^-1, 2,848 cm^-1, agreeing with CH₂ asymmetrical and symmetrical stretching, respectively. PSB enriched biochar favored A. cepa plant growth during the five-week evaluation period. To the best of our knowledge, this is the first report of an in vitro circular production model, where P. ostreatus was employed at a microcosmos level to bioconvert LCB and LDPE_oxo residues from the agroindustrial sector, followed by thermoconversion to produce an enriched biochar with PSB to be used as a biofertilizer to grow A. cepa at greenhouse scale.

Alkyl-Modified Gold Surfaces: Characterization of the Au-C Bond

The surface of gold can be modified with alkyl groups through a radical crossover reaction involving alkyliodides or bromides in the presence of a sterically hindered diazonium salt. In this paper, we characterize the Au-C(alkyl) bond by surface-enhanced Raman spectroscopy (SERS); the corresponding peak appears at 387 cm^-1 close to the value obtained by theoretical modeling. The Au-C(alkyl) bond energy is also calculated, it reaches -36.9 kcal mol^-1 similar to that of an Au-S-alkyl bond but also of an Au-C(aryl) bond. In agreement with the similar energies of Au-C(alkyl) and Au-S-(alkyl), we demonstrate experimentally that these groups can be exchanged on the surface of gold.

Surface functionalisation of polymers

Many applications of polymers require the functionalisation of their surface for use in sensors, composite materials, membranes, microfluidic and biomedical devices and many others. Such surface modifications endow the surface with new properties independent of those of the bulk polymer. This tutorial review describes the different methods, based on very diverse principles, that are available to perform this surface functionalisation, including plasma and UV irradiation, atomic layer deposition, electrochemistry, oxidation, reduction, hydrolysis, the use of radicals and grafting "on" or "from" polymers. The principles of the different methods are briefly described and many examples are given to highlight the possibilities of the methods and the possible applications. A section is devoted to the surface modification of polymeric nanoparticles.