Lipid-Based Liquid Crystals As Carriers for Antimicrobial Peptides: Phase Behavior and Antimicrobial Effect

Tuning structure and morphology of lipidic cubosomes by encapsulation of novel porphyrin-derivatives

Cubosomes are non-lamellar lipid nanoparticles that have drawn a significant attention in the field of nanomedicine due to their tunable properties. However, the formation of vesicles during the preparation of cubosomes, and the presence of mixed bicontinuous cubic phases, may lead to artifacts and lack of correlation between the physico-chemical and biological characterization. In this work, we have formulated cubosomes composed by monoolein as building block and triblock copolymer Pluronic® F108 as a stabilizer, encapsulating three porphyrin derivatives: two attached to bile acid moieties and one to a tetrapeptide to be used for potential theranostic applications. First, the effect of the cargo concentration (0.25, 0.50 and 1.00 mg/mL, for all three molecules) was evaluated on the structure, showing that the bile acid derivatives did not affect the self-assembly of the lipid providing only Pn3m phases; however, a mixed phase Pn3m + Im3m and a subsequent loss in crystallinity were induced by increasing concentrations of the tetrapeptide derivative. Overall, the encapsulation of the three molecules at 25 and 37 ∘C did not affect neither the hydrodynamic size nor the polydispersity of the cubosomes, influencing mainly the ζ-potential - positive in the case of the tetrapeptide and negative for the bile acid derivatives. The samples formulated with 0.50 mg/mL exhibited higher colloidal stability over time, with no significant changes in size or ζ-potential for over a month. Interestingly, the formulations containing the bile acid derivatives displayed the typical morphology of cubosomes in solution and a reduced number of vesicles (ca. 60:40 as cubosomes-to-vesicles ratio), whereas the sample containing the porphyrin attached to the tetrapeptide led to a ratio of cubosomes-to-vesicles estimated as 26:74, similar to the results of the empty formulation. The experiments at body temperature highlighted that the structure of the different formulations was not affected in a significant manner with retention of the phases observed at room temperature. The promising physico-chemical properties, especially at body temperature, could make these samples suitable as nanoplatforms for drug delivery applications.

Lipid liquid-crystalline nanoparticles as a suitable platform for accommodating sensitive membrane proteins: monitoring the activity of HMG-CoA reductase

Biological molecules such as integral membrane proteins, peptides, and nucleic acids that are not soluble or sufficiently stable in aqueous solutions can be stabilized through encapsulation in lipid nanoparticles. Discovering the potential of lipid liquid-crystalline nanoparticles opens up exciting possibilities for housing sensitive membrane proteins. Lipid mesophases provide an environment that protects the cargo, usually a drug, from rapid clearance or degradation. This study employed the mentioned platform to stabilize a different cargo-an essential transmembrane enzyme, HMG-CoA reductase (HMGR). The nanostructured lipid liquid-crystalline (LLC) nanoparticles known as hexosomes are selected as a convenient nanocontainer for the redox-active protein for real-time monitoring of its functions in the bulk of the solution and point to the applicability of the proposed platform in the evaluation of therapeutic functions of the protein by standard physicochemical methods. Instead of using detergents, which usually affect the functions and stability of sensitive membrane proteins, we provide a suitable environment, protecting them in the bulk of the solution against other present species, e.g., toxic compounds or degrading proteins. The objective was to optimize the composition and structure of the lipid nanoparticles to meet the needs of such sensitive and flexible membrane proteins as HMGR and compare the functioning of the encapsulated enzyme with that of the same protein free in the aqueous solution. The catalytic reaction of HMGR involves the 4-electron reduction of HMG-CoA to mevalonate and CoA while simultaneously oxidizing NADPH to NADP+. Subsequently, mevalonate is transformed into cholesterol. The hexosomes we selected as lipid nano-containers were composed of monoolein, 1-oleoyl-rac-glycerol (GMO), Pluronic® F127, and poly(ethylene glycol) (PEG). These specific structural characteristics of the lipid nanoparticles were found optimal for enhancing the stability of HMGR. We characterized these hexosomes using dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), and cryogenic electron microscopy (Cryo-TEM) methods, both with and without the encapsulated protein. In our innovative approach, the enzyme activity was assessed by monitoring changes in NADPH concentration outside the nanocarrier. We tracked fluctuations in NADPH levels during the catalytic reaction using two independent methods: UV-Vis spectrophotometry and cyclic voltammetry. Significantly, we could demonstrate the inhibition of the nano-encapsulated enzyme by fluvastatin, an enzyme inhibitor and cholesterol-lowering drug. This paves the way for the discovery of new enzymatic inhibitors and activators as therapeutic agents controlling the activity of membrane proteins, thereby inspiring future cholesterol-lowering therapies in our case and, in general, further research and potential new treatments.

Nanogel encapsulation improves pharmacokinetics and biodistribution of antimicrobial peptide LL37 upon lung deposition: In vivo evaluation by SPECT/CT

Antimicrobial peptides (AMPs) constitute the first line of defense in the human body and exogenous application of AMPs is a desirable therapeutic strategy to combat bacterial infections. However, the antibacterial properties of AMPs are often time limited due to fast degradation by host and bacterial proteases, and administration of the needed high doses may result in local inflammation, as well as nephro- and hepatotoxicity. In this study, we assessed the possibility of using nanogels composed of hyaluronic acid modified with octenyl succinic anhydride (HA-OSA) as a drug delivery system to improve the pharmacokinetics and safety profile of LL37, a naturally occurring AMP, when administered to the mucosal surface of the lungs. The peptide LL37 and the polymer HA-OSA were radiolabeled with 67gallium and 111indium, respectively, allowing for non-invasive tracking over time in mice following intratracheal administration. When non-formulated LL37 was administered, approximately 85 % of the peptide dose was cleared from the lungs over 48 h, whereas encapsulation of LL37 in HA-OSA nanogels increased peptide retention in the lungs by 36 %. Additionally, the amount of peptide in excretory organs was reduced, decreasing potential liver and kidney toxicity known to be associated with AMP-based therapies. The findings in this study indicate that encapsulation of LL37 in nanogels provides beneficial pharmacokinetic effects.

Isotretinoin-Loaded Topical Lipid Liquid Crystal for the Treatment of Acne: In-Vitro and In-Vivo Evaluations

Effective acne treatment is critical due to its profound impact on physical and psychological well-being. It was shown that severe systemic side effects, including teratogenicity, ovarian reserve reduction, depression, dry skin, hypertriglyceridemia, and intracranial hypertension limited oral isotretinoin usage. Therefore, this study addresses these challenges by developing isotretinoin-loaded lipid liquid crystal (LLC-IT) nanoparticles for topical application, aiming to enhance localized delivery while minimizing systemic exposure. LLC-IT nanoparticles were prepared using a top-down method and evaluated for their physicochemical properties, photostability, cytotoxicity, antimicrobial activity, in-vitro drug release, and in-vivo therapeutic efficacy. A testosterone-induced acne mouse model was used to compare LLC-IT treatment with untreated and commercial isotretinoin gel-treated groups. LLC-IT nanoparticles exhibited a uniform particle size (69.57 ± 0.51 nm), low polydispersity index (0.264 ± 0.01), and stable zeta potential (- 19.3 ± 0.2 mV). High encapsulation efficiency (95% ± 3) and effective loading capacity (1.15% ± 0.13) were achieved. Drug release was diffusion-controlled with minimal UV-induced degradation. Stability assessments over 12 months confirmed consistent properties across varying storage temperatures. LLC-IT displayed significant antibacterial activity and reduced skin irritation in Draize tests compared to commercial gels. In-vivo, LLC-IT reduced inflammation significantly more than untreated or commercial gel-treated groups, indicating enhanced therapeutic efficacy of LLC-IT formulation. The isotretinoin-loaded lipid liquid crystal formulation shows superior stability and efficacy with reduced side effects compared to conventional treatments, offering a more effective and patient-friendly solution, as well as a promising alternative for industrial production in acne management.

Antibacterial and anti-virulence activity of eco-friendly resveratrol-loaded lipid nanocapsules against methicillin-resistant staphylococcus aureus

Methicillin-resistant Staphylococcus aureus (MRSA) is challenging modern antimicrobial therapy due to its high antimicrobial resistance. Nutraceuticals have gained a lot of interest and their incorporation into nanoparticles further improves their efficacy. This study aimed to evaluate the antibacterial activity of linalool-based lipid nanocapsules loaded with resveratrol (LIN-LNC-RES) as a synergistic strategy against MRSA. LIN-LNC-RES were prepared by the phase inversion temperature method and characterized for their colloidal properties, in vitro release, and stability. The antibacterial and antibiofilm activity against S. aureus and different MRSA clinical isolates were investigated. Furthermore, scanning electron microscopy (SEM) imaging for visualization of biofilm formation and bacterial membrane integrity as well as mechanistic investigation using quantitative real-time polymerase chain reaction (qRT-PCR) analysis were performed. LIN-LNCs-RES demonstrated favorable properties with a size of 35.19 ± 0.72 nm, PDI of 0.09 ± 0.02 and a zeta potential of -2.53 ± 0.07 mV with RES 98% EE. They showed a controlled release of RES over 24 h and were stable at 4 °C for 3 months. Compared to free drug, LIN-LNC-RES showed a 4-fold decrease in MIC values and 10-fold decrease in half maximal biofilm inhibitory concentration value. Biofilm eradication assay showed superiority of LIN-LNC-RES over RES against all isolates with disrupted bacterial membranes as revealed by SEM. Mechanistically, qRT-PCR showed that LIN-LNC-RES significantly reduced RNAIII gene expression as well as the expression of SaeRS two component system, potentially affecting quorum sensing and virulence factors expression. RES-loaded LIN-based nanosystem offers a great potential for combating MRSA infections, neutralizing its virulence activity hence, overcoming antimicrobial resistance.

Cubosomes-based hydrogels; A promising advancement for drug delivery

Hydrogels have so far shown promising opportunities for possible drug delivery applications. Cubosomes (Cub), bicontinuous cubic phase liquid crystals, possess several characteristics that make them appealing as a versatile medium for drug administration. They have been regarded as prospective nanocarriers for drugs, offering a promising alternative to liposomes as a drug delivery method. Cub have the ability to encapsulate lipophilic, hydrophilic, and amphiphilic medicines. Hydrogels have recently shown significant interest in using Cub-based formulations. This paper examines the current advancements in biodegradable Cub-based hydrogels (Cubogel) for intelligent medication delivery to various organs. In conclusion, this paper briefly discusses the prospects and problems of hydrogels based on Cub.

Harnessing the Power of Antimicrobial Peptides: From Mechanisms to Delivery Optimization for Topical Infections

Antimicrobial peptides (AMPs) have emerged as promising agents for treating topical infections due to their enhanced biocompatibility and resistance to systemic degradation. AMPs possess host immunomodulatory effects and disintegrate bacterial cell membranes, a mechanism less prone to microbial resistance compared to conventional antibiotics, making AMPs potential candidates for antimicrobial delivery. The review discusses the challenges posed by antimicrobial resistance (AMR) and explores the mechanisms by which bacteria develop resistance to AMPs. The authors provide a detailed analysis of the mechanisms of action of AMPs, their limitations, and strategies to improve their efficacy. Conventional AMP delivery systems, including polymeric, synthetic, and lipid-based nanoparticles and cubosomes, face challenges of microbial resistance mechanisms via efflux pump systems, bacterial cell membrane modifications, and protease enzyme release. This review explores strategies to optimize these delivery systems. Furthermore, market statistics and the growing interest in peptide antibiotics have been explored in this review. The authors provide future research directions, such as exploring gene-targeting approaches to combat emerging bacterial resistance against AMPs, and emphasize considering the conformational stability of peptides, the skin microbiome's nature at the infection site, and proteolytic stability for developing efficient AMP delivery systems for topical infections.

Unveiling the structural aspects of novel azo-dyes with promising anti-virulence activity against MRSA: a deep dive into the spectroscopy via integrated experimental and computational approaches

A novel series of azo dyes was successfully synthesized by combining amino benzoic acid and amino phenol on the same molecular framework via azo linkage. The structural elucidation of these dyes was carried out using various spectroscopic techniques, including UV-vis, FT-IR, NMR spectroscopy, and HRMS. Surprisingly, the aromatic proton in some dyes exhibited exchangeability in D2O, prompting a 2D NMR analysis to confirm this phenomenon. Furthermore, comprehensive density functional theory (DFT) calculations were conducted to unravel synthetic dyes' geometrical and electronic properties. Meanwhile, the reactivity of various sites was further investigated through Frontier Molecular Orbitals (FMOs) analysis and molecular electrostatic potential mapping. Besides, the experimental NMR spectra were interpreted by incorporating theoretically computed NMR spectrum and reduced density gradient (RDG) function. These computations revealed a pronounced intramolecular hydrogen bond through O-H⋯N interaction that significantly influenced the proton chemical shift. The dyes were assessed for their antimicrobial activities using agar diffusion, micro broth dilution, and biofilm inhibition assays. Interestingly, one of the synthetic dyes showed promising antibacterial effects against S. aureus (ATCC-6538) as well as against a multidrug-resistant MRSA clinical isolate with a MIC (minimum inhibitory concentration) of 78.12 μg mL-1. Moreover, that dye inhibited biofilm formation of the strong biofilm former clinical MRSA isolate with a concentration as low as 0.25 MIC (19.53 μg mL-1). Indeed, our qPCR data suggest that inhibiting the SaeS/SaeR system is another potential mechanism by which D4 exerts its antibacterial and anti-virulence effects. Altogether, this shows these synthetic azo dyes' promising antibacterial and anti-virulence activities concerning MRSA clinical infections.

Liquid crystal nanoparticles for oral combination antibiotic therapies: A strategy towards protecting commensal gut bacteria during treatment

Antibiotics are essential for treating infections and reducing risks during medical interventions. However, many commonly used antibiotics lack the physiochemical properties for an efficient oral administration when treating systemic infection. Instead, we are reliant on intravenous delivery, which presents complications outside of clinical settings. Developing novel formulations for oral administration is a potential solution to this problem. We engineered hexosome and cubosome liquid crystal nanoparticles (LCNPs) characterized by small-angle X-ray scattering and cryogenic transmission electron microscopy, and could encapsulate the antibiotics vancomycin (VAN) and clarithromycin (CLA) with high loading efficiencies. By rationally choosing stable lipid building blocks, the loaded LCNPs demonstrated excellent resilience against enzymatic degradation in an in vitro gut model LCNP stability is crucial as premature antibiotic leakage can negatively impact the gut microbiota. In screens against the representative gut bacteria Enterococcus faecalis and Escherichia coli, our LCNPs provided a protective effect. Furthermore, we explored co-administration and dual loading strategies of VAN and CLA, and demonstrated effective loading, stability and protection for E. faecalis and E. coli. This work represents a proof of concept for the early-stage development of antibiotic-loaded LCNPs to treat systemic infection via oral administration, opening opportunities for combination antibiotic therapies.

Gelatin emulsion gels loaded with host defence peptides for the treatment of antibiotic-resistant infections

The surge in multidrug-resistant bacteria against conventional antibiotics is a rapidly developing global health crisis necessitating novel infection management strategies. Host defence peptides (HDPs), also known as antimicrobial peptides (AMPs), offer a promising alternative to traditional antibiotics, but their practical translation is limited by their susceptibility to proteases and potential off-site cytotoxicity. In this paper, we investigate the feasibility of using gelatin emulsion gels (GELs), prepared using a water-in-oil (W/O) method, for the delivery of HDPs DJK-5 and IDR-1018 to improve their clinical utility. DJK-5-loaded GELs exhibited complete eradication of planktonic Methicillin-resistant Staphylococcus aureus (MRSA) at 4 - and 24-h intervals. Similarly, IDR-1018-loaded GELs demonstrated almost complete killing of MRSA and Escherichia coli (E. coli) after 4 h. Importantly, none of the GEL formulations investigated exhibited in vitro cytotoxicity. Overall, these HDP loaded GELs are a promising solution for the treatment of antibiotic-resistant infections.

Cubosome lipid nanocarriers for delivery of ultra-short antimicrobial peptides

HYPOTHESIS

Although antimicrobial peptides (AMPs) are a promising class of new antibiotics, their inherent susceptibility to degradation requires nanocarrier-mediated delivery. While cubosome nanocarriers have been extensively studied for delivery of AMPs, we do not currently understand why cubosome encapsulation improves antimicrobial efficacy for some compounds but not others. This study therefore aims to investigate the link between the mechanism of action and permeation efficiency of the peptides, their encapsulation efficacy, and the antimicrobial activity of these systems.

EXPERIMENTS

Encapsulation and delivery of Indolicidin, and its ultra-short derivative, Priscilicidin, were investigated using SAXS, cryo-TEM and circular dichroism. Molecular dynamics simulations were used to understand the loading of these peptides within cubosomes. The antimicrobial efficacy was assessed against gram-negative (E. coli) and gram-positive (MRSA) bacteria.

FINDINGS

A high ionic strength solution was required to facilitate high loading of the cationic AMPs, with bilayer encapsulation driven by tryptophan and Fmoc moieties. Cubosome encapsulation did not improve the antimicrobial efficacy of the AMPs consistent with their high permeation, as explained by a recent 'diffusion to capture model'. This suggests that cubosome encapsulation may not be an effective strategy for all antimicrobial compounds, paving the way for improved selection of nanocarriers for AMPs, and other antimicrobial compounds.

Nanocarrier-Mediated Dermal Drug Delivery System of Antimicrobial Agents for Targeting Skin and Soft Tissue Infections

Antimicrobial resistance in disease-causing microbes is seen as a severe problem that affects the entire world, makes therapy less effective, and raises mortality rates. Dermal antimicrobial therapy becomes a desirable choice in the management of infectious disorders since the rising resistance to systemic antimicrobial treatment frequently necessitates the use of more toxic drugs. Nanoparticulate systems such as nanobactericides, which have built-in antibacterial activity, and nanocarriers, which function as drug delivery systems for conventional antimicrobials, are just two examples of the treatment methods made feasible by nanotechnology. Silver nanoparticles, zinc oxide nanoparticles, and titanium dioxide nanoparticles are examples of inorganic nanoparticles that are efficient on sensitive and multidrug-resistant bacterial strains both as nanobactericides and nanocarriers. To stop the growth of microorganisms that are resistant to standard antimicrobials, various antimicrobials for dermal application are widely used. This review covers the most prevalent microbes responsible for skin and soft tissue infections, techniques to deliver dermal antimicrobials, topical antimicrobial safety concerns, current issues, challenges, and potential future developments. A thorough and methodical search of databases, such as Google Scholar, PubMed, Science Direct, and others, using specified keyword combinations, such as "antimicrobials," "dermal," "nanocarriers," and numerous others, was used to gather relevant literature for this work.

Colloidal Structure Dictates Antimicrobial Efficacy in LL-37 Self-Assemblies With Glycerol Monooleate

The antimicrobial peptide LL-37 is a promising alternative to conventional antibiotics to combat bacteria in suspension and biofilms. Its self-assembly with polar lipids is suggested to improve its potential for therapeutic applications with higher stability against degradation and bioavailability. This study investigates the self-assembly of LL-37 with glyceryl monooleate (GMO), establishing the link between colloidal structure and antimicrobial activity. Small-angle X-ray scattering, dynamic light scattering and cryogenic transmission electron microscopy show structural transformation from dispersions of inverse bicontinuous structure (cubosomes) to multilamellar vesicles and direct rod-like mixed-micelles upon increasing the content of LL-37 in GMO. In vitro assays against planktonic and biofilm cells demonstrate that 128 µg mL-1 of GMO cubosomes have no impact on Pseudomonas aeruginosa. Still, the cubosomes reduce the Staphylococcus aureus planktonic population by ≈ 1-log after 24 h. Cylindrical micelles formed at LL-37/GMO 9/1 and 8/2 with 128 µg mL-1 LL-37 decrease the Pseudomonas aeruginosa population by 6-log. This activity is gradually abolished when LL-37 is encapsulated in vesicles or cubosomes. They also demonstrate low antibiofilm efficacy and promote the biomass of Staphylococcus aureus biofilms. These results highlight the importance of colloidal structure for therapeutic outcomes, providing insights for advanced lipid nanocarrier designs.

Antibacterial and anti-biofilm activities of antibiotic-free phosphatidylglycerol/docosahexaenoic acid lamellar and non-lamellar liquid crystalline nanoparticles

Infectious diseases, particularly those associated with biofilms, are challenging to treat due to an increased tolerance to commonly used antibiotics. This underscores the urgent need for innovative antimicrobial strategies. Here, we present an alternative simple-by-design approach focusing on the development of biocompatible and antibiotic-free nanocarriers from docosahexaenoic acid (DHA) that has the potential to combat microbial infections and phosphatidylglycerol (DOPG), which is attractive for use as a biocompatible prominent amphiphilic component of Gram-positive bacterial cell membranes. We assessed the anti-bacterial and anti-biofilm activities of these nanoformulations (hexosomes and vesicles) against S. aureus and S. epidermidis, which are the most common causes of infections on catheters and medical devices by different methods (including resazurin assay, time-kill assay, and confocal laser scanning microscopy on an in vitro catheter biofilm model). In a DHA-concentration-dependent manner, these nano-self-assemblies demonstrated strong anti-bacterial and anti-biofilm activities, particularly against S. aureus. A five-fold reduction of the planktonic and a four-fold reduction of biofilm populations of S. aureus were observed after treatment with hexosomes. The nanoparticles had a bacteriostatic effect against S. epidermidis planktonic cells but no anti-biofilm activity was detected. We discuss the findings in terms of nanoparticle-bacterial cell interactions, plausible alterations in the phospholipid membrane composition, and potential penetration of DHA into these membranes, leading to changes in their structural and biophysical properties. The implications for the future development of biocompatible nanocarriers for the delivery of DHA alone or in combination with other anti-bacterial agents are discussed, as novel treatment strategies of Gram-positive infections, including biofilm-associated infections.

Synthesis and characterisation of antimicrobial metal-organic frameworks as multi-drug carriers

Antibiotic resistance is a significant global concern, necessitating the development of either new antibiotics or advanced delivery methods. With this in mind, we report on the synthesis and characterisation of a new family of Metal-Organic Frameworks (MOFs), OnG6 MOFs, designed to act as multi-drug carriers for bacterial infection treatment. OnG6 is based on the pro-drug 4,4'-azodisalicylic acid (AZDH4), which in vivo produces two equivalents of para-aminosalicylic acid (ASA), a crucial drug for M. tuberculosis treatment. X-ray and computational studies revealed that OnG6 MOFs are mesoporous MOFs with etb topology and an [M2(AZD)] formula (M = Zn, OnG6-Zn; Mg, OnG6-Mg; Cu, OnG6-Cu; and Co, OnG6-Co), featuring 1-dimensional channel type pores of 25 Å diameter. OnG6 MOFs are the first reported MOFs bearing the ligand AZDH4, joining the family of mesoporous MOFs arranged in a honeycomb pattern. They absorb isoniazid (INH) and ciprofloxacin (CIPRO) with the former being a specific antibiotic for M. tuberculosis, and the latter being a broader-spectrum antibiotic. The stability of the MOFs and their capacity for antibiotic uptake depend on the nature of the metal ion, with OnG6-Mg demonstrating the highest drug absorption. The antimicrobial activity of these species was assessed against S. aureus and E. coli, revealing that the carriers containing CIPRO displayed optimal efficacy.

Small-angle X-ray and neutron scattering applied to lipid-based nanoparticles: Recent advancements across different length scales

Lipid-based nanoparticles (LNPs), ranging from nanovesicles to non-lamellar assemblies, have gained significant attention in recent years, as versatile carriers for delivering drugs, vaccines, and nutrients. Small-angle scattering methods, employing X-rays (SAXS) or neutrons (SANS), represent unique tools to unveil structure, dynamics, and interactions of such particles on different length scales, spanning from the nano to the molecular scale. This review explores the state-of-the-art on scattering methods applied to unveil the structure of lipid-based nanoparticles and their interactions with drugs and bioactive molecules, to inform their rational design and formulation for medical applications. We will focus on complementary information accessible with X-rays or neutrons, ranging from insights on the structure and colloidal processes at a nanoscale level (SAXS) to details on the lipid organization and molecular interactions of LNPs (SANS). In addition, we will review new opportunities offered by Time-resolved (TR)-SAXS and -SANS for the investigation of dynamic processes involving LNPs. These span from real-time monitoring of LNPs structural evolution in response to endogenous or external stimuli (TR-SANS), to the investigation of the kinetics of lipid diffusion and exchange upon interaction with biomolecules (TR-SANS). Finally, we will spotlight novel combinations of SAXS and SANS with complementary on-line techniques, recently enabled at Large Scale Facilities for X-rays and neutrons. This emerging technology enables synchronized multi-method investigation, offering exciting opportunities for the simultaneous characterization of the structure and chemical or mechanical properties of LNPs.

Synthesis of folate targeted theranostic cubosomal platform for co-delivery of bismuth oxide and doxorubicin to melanoma in vitro and in vivo

Liquid crystalline nanoparticles (LCNPs) have gained much attention in cancer nanomedicines due to their unique features such as high surface area, storage stability, and sustained-release profile. In the current study, a novel LCNP for co-encapsulation of Bi2O3 and hydrophilic doxorubicin (DOX) was fabricated and functionalized with folic acid (FA) to achieve efficient tumor targeting toward CT-scan imaging and chemotherapy of melanoma in vitro and in vivo. LCNPs Bi2O3 NPs were prepared using glycerol monooleate-pluronic F-127 (GMO/PF127/water). Firstly, GMO/water were homogenized to prepare LC gel. Then, the stabilizer aqueous solution (PF127/Bi2O3/DOX) was added to the prepared LC gel and homogenized using homogenization and ultrasonication. The formulated NPs exhibited superior stability with encapsulation efficiency. High cytotoxicity and cellular internalization of the FA-Bi2O3-DOX-NPs were observed in comparison with Bi2O3-DOX-NPs and the free DOX in folate-receptor (FR) overexpressing cells (B16F10) in vitro. Moreover, ideal tumor suppression with increased survival rate were observed in tumorized mice treated with FA-Bi2O3-DOX-NPs compared to those treated with non-targeted one. On the other hand, the CT-imaging ability of the Bi2O3-DOX-NPs was tested inB16F10 tumor-bearing mice. The obtained data indicated a high potential of the developed targeted theranostic FA-Bi2O3-DOX-NPs for diagnostics and treatment of melanoma.

Cell interactions with lipid nanoparticles possessing different internal nanostructures: Liposomes, bicontinuous cubosomes, hexosomes, and discontinuous micellar cubosomes

HYPOTHESIS

Lyotropic liquid crystalline nanoparticles (LLCNPs) with complex internal nanostructures hold promise for drug delivery. Cubosomes, in particular, have garnered interest for their ability to fuse with cell membranes, potentially bypassing endosomal escape challenges and improving cellular uptake. The mesostructure of nanoparticles plays a crucial role in cellular interactions and uptake. Therefore, we hypothesise that the specific internal mesophase of the LLCNPs will affect their cellular interactions and uptake efficiencies, with cubosomes exhibiting superior cellular uptake compared to other LLCNPs.

EXPERIMENTS

LLCNPs with various mesophases, including liposomes, cubosomes, hexosomes, and micellar cubosomes, were formulated and characterised. Their physicochemical properties and cytotoxicity were assessed. Chinese Hamster Ovarian (CHO) cells were treated with fluorescently labelled LLCNPs, and their interactions were monitored and quantified through confocal microscopy and flow cytometry.

FINDINGS

The non-lamellar LLCNPs showed significantly higher cellular interactions compared to liposomes, with cubosomes exhibiting the highest level. However, there was no significant difference in relative cell uptake between cubosomes, hexosomes, and micellar cubosomes. Cell uptake experiments at 4 °C revealed the presence of an energy-independent uptake mechanism. This study provides the first comparative analysis of cellular interactions and uptake efficiencies among LLCNPs with varying mesophases, while maintaining similar size, composition, and surface charge.

Cubosome Lipid Nanocarriers As a Drug Delivery Vehicle for Intracellular Mycobacterium tuberculosis Infections

Mycobacterium tuberculosis (MTB) causes the infectious disease tuberculosis (TB), responsible for more deaths than any other single infectious disease in history. Intracellular MTB are slow growing and difficult to target with traditional antitubercular drugs, leading to the emergence of multidrug resistance in TB infection, which is a major global public health issue. Recent advances in innovative lipid nanotechnologies for drug delivery have demonstrated promising outcomes for chronic infectious diseases but have not yet been tested as potential delivery systems for intracellular infections such as TB. The current study evaluates the potential of monoolein (MO)-based cationic cubosomes for the encapsulation and delivery of the first line antitubercular drug rifampicin (RIF) against an MTB-H37Ra in vitro culture model. In particular, we show that the use of cationic cubosomes as delivery vehicles reduced the minimum inhibitory concentration (MIC) of RIF by 2-fold against actively replicating MTB-H37Ra (compared to that of the free drug) and also shortened the lifecycle duration of axenic MTB-H37Ra from 5 to 3 days. The cubosome-mediated delivery was also found to be effective against intracellular MTB-H37Ra within THP-1 human macrophages, with a 2.8 log reduction in viability of the bacilli after 6 days incubation at the MIC. The killing time was also reduced from 8 to 6 days without distressing the host macrophages. Mechanistic studies on the uptake of RIF-loaded cationic cubosomes using total internal reflection fluorescence microscopy (TIRFM) demonstrated the capacity of these lipid particles to effectively target intracellular bacteria. Overall, these results demonstrate that cationic cubosomes are a potent delivery system for the antitubercular drug RIF for therapeutic management of TB.

Dynamic Processes and Mechanical Properties of Lipid-Nanoparticle Mixtures

In this study, we investigate the dynamic processes and mechanical properties of lipid nanoparticle mixtures in a melt via dissipation particle dynamic simulation. By investigating the distribution of nanoparticles in lamellar and hexagonal lipid matrices in equilibrium state and dynamic processes, we observe that the morphology of such composites depends not only on the geometric features of the lipid matrix but also on the concentration of nanoparticles. The dynamic processes are also demonstrated by calculating the average radius of gyration, which indicates the isotropic conformation of lipid molecules in the x-y plane and that the lipid chains are stretched in the z direction with the addition of nanoparticles. Meanwhile, we predict the mechanical properties of lipid-nanoparticle mixtures in lamellar structures by analyzing the interfacial tensions. Results show that the interfacial tension decreased with the increase in nanoparticle concentration. These results provide molecular-level information for the rational and a priori design of new lipid nanocomposites with ad hoc tailored properties.

Advancements, challenges and future perspectives on peptide-based drugs: Focus on antimicrobial peptides

Among other health related issues, the rising concerns on drug resistance led to look for alternative pharmaceutical drugs that are effective both against infectious and noninfectious diseases. Antimicrobial peptides (AMPs) emerged as potential therapeutic molecule with wide range of applications. With their limitations, AMPs have gained reputable attentions in research as well as in the pharmaceutical industry. This review highlighted the historical background, research trends, technological advancements, challenges, and future perspectives in the development and applications of peptide drugs. Some vital questions related with the need for pharmaceutical production, factors for the slow and steady journey, the importance of oral bioavailability, and the drug resistance possibilities of AMPs were raised and addressed accordingly. Therefore, the current study is believed to provide a profound understanding in the past and current scenarios and future directions on the therapeutic impacts of peptide drugs.

Antimicrobial peptide-grafted PLGA-PEG nanoparticles to fight bacterial wound infections

Wound infection treatment with antimicrobial peptides (AMPs) is still not a reality, due to the loss of activity in vivo. Unlike the conventional strategy of encapsulating AMPs on nanoparticles (NPs) leaving activity dependent on the release profile, this work explores AMP grafting to poly(D,L-lactide-co-glycolide)-polyethylene glycol NPs (PLGA-PEG NPs), whereby AMP exposition, infection targeting and immediate action are promoted. NPs are functionalized with MSI-78(4-20), an equipotent and more selective derivative of MSI-78, grafted through a thiol-maleimide (Mal) Michael addition. NPs with different ratios of PLGA-PEG/PLGA-PEG-Mal are produced and characterized, with 40%PLGA-PEG-Mal presenting the best colloidal properties and higher amounts of AMP grafted as shown by surface charge (+8.6 ± 1.8 mV) and AMP quantification (326 μg mL^-1, corresponding to 16.3 μg of AMP per mg of polymer). NPs maintain the activity of the free AMP with a minimal inhibitory concentration (MIC) of 8-16 μg mL^-1 against Pseudomonas aeruginosa, and 16-32 μg mL^-1 against Staphylococcus aureus. Moreover, AMP grafting accelerates killing kinetics, from 1-2 h to 15 min for P. aeruginosa and from 6-8 h to 0.5-1 h for S. aureus. NP activity in a simulated wound fluid is maintained for S. aureus and decreases slightly for P. aeruginosa. Furthermore, NPs do not demonstrate signs of cytotoxicity at MIC concentrations. Overall, this promising formulation helps unleash the full potential of AMPs for the management of wound infections.

Liquid Crystalline Nanoparticles Conjugated with Dexamethasone Prevent Cisplatin Ototoxicity In Vitro

The conjugation of drugs with nanoparticles represents an innovative approach for controlled and targeted administration of therapeutic agents. Nanoparticle-based systems have been tested for the inner ear therapy, increasing the drug diffusion and being detected in all parts of the cochlea when locally applied near the round window. In this study, glycerol monooleate liquid crystalline NanoParticles were conjugated with Dexamethasone (NPD), a hydrophobic drug already used for inner ear treatments but defective in solubility and bioavailability. NPD has been tested in vitro in the cell line OC-k3, a model of sensory cells of the inner ear, and the therapeutic efficacy has been evaluated against cisplatin, a chemotherapeutic compound known to induce ototoxicity. After comparing the physical chemical characteristics of NPD to the equivalent naïve nanoparticles, an initial investigation was carried out into the nanoparticle's uptake in OC-k3 cells, which takes place within a few hours of treatment without causing toxic damage up to a concentration of 50 µg/mL. The NPD delivered the dexamethasone inside the cells at a significantly increased rate compared to the equivalent free drug administration, increasing the half-life of the therapeutic compound within the cell. Concerning the co-treatment with cisplatin, the NPD significantly lowered the cisplatin cytotoxicity after 48 h of administration, preventing cell apoptosis. To confirm this result, also cell morphology, cell cycle and glucocorticoids receptor expression were investigated. In conclusion, the NPD system has thus preliminarily shown the potential to improve the therapeutic efficacy of treatments delivered in the inner ear and prevent drug-induced ototoxicity.

Magnetically‐activated lipid nanocarriers in biomedical applications: A review of current status and perspective

Magnetically-activated lipid nanocarriers have become a research hotspot in the field of biomedicine. Liposomes and other lipid-based carriers possess good biocompatibility as well as the ability to carrying therapeutic cargo with a range of physicochemical properties. Previous studies have demonstrated that magnetic materials have potential wide applications in clinical diagnosis and therapy, such as in MRI as contrast agents and in hyperthermic obliteration of cancer tissues. More recently magneto-thermal activation of lipid carriers to stimulate drug release has extended the range of further therapeutic benefits. Here, an overview of the current development of magnetically-activated lipid nanocarriers in the field of biomedicine is provided, including the methods of fabrication of the nanocarriers and their in vitro and in vivo performance. A discussion of the current barriers to translation of these materials as medicines is provided in the context of clinical and regulatory complexities of using magnetically responsive materials in therapeutic applications. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Biology-Inspired Nanomaterials > Lipid-Based Structures Implantable Materials and Surgical Technologies > Nanomaterials and Implants.

Pharmaceutical nanotechnology: Antimicrobial peptides as potential new drugs against WHO list of critical, high, and medium priority bacteria

Nanobiotechnology is a relatively unexplored area that has, nevertheless, shown relevant results in the fight against some diseases. Antimicrobial peptides (AMPs) are biomacromolecules with potential activity against multi/extensively drug-resistant bacteria, with a lower risk of generating bacterial resistance. They can be considered an excellent biotechnological alternative to conventional drugs. However, the application of several AMPs to biological systems is hampered by their poor stability and lifetime, inactivating them completely. Therefore, nanotechnology plays an important role in the development of new AMP-based drugs, protecting and carrying the bioactive to the target. This is the first review article on the different reported nanosystems using AMPs against bacteria listed on the WHO priority list. The current shortage of information implies a nanobiotechnological potential to obtain new drugs or repurpose drugs based on the AMP-drug synergistic effect.

Insights on Development Aspects of Polymeric Nanocarriers: The Translation from Bench to Clinic

Scientists are focusing immense attention on polymeric nanocarriers as a prominent delivery vehicle for several biomedical applications including diagnosis of diseases, delivery of therapeutic agents, peptides, proteins, genes, siRNA, and vaccines due to their exciting physicochemical characteristics which circumvent degradation of unstable drugs, reduce toxic side effects through controlled release, and improve bioavailability. Polymers-based nanocarriers offer numerous benefits for in vivo drug delivery such as biocompatibility, biodegradability, non-immunogenicity, active drug targeting via surface modification, and controlled release due to their pH-and thermosensitive characteristics. Despite their potential for medicinal use, regulatory approval has been achieved for just a few. In this review, we discuss the historical development of polymers starting from their initial design to their evolution as nanocarriers for therapeutic delivery of drugs, peptides, and genes. The review article also expresses the applications of polymeric nanocarriers in the pharmaceutical and medical industry with a special emphasis on oral, ocular, parenteral, and topical application of drugs, peptides, and genes over the last two decades. The review further examines the practical, regulatory, and clinical considerations of the polymeric nanocarriers, their safety issues, and directinos for future research.

Lyotropic liquid crystals for parenteral drug delivery

The necessity for long-term treatments of chronic diseases has encouraged the development of novel long-acting parenteral formulations intending to improve drug pharmacokinetics and therapeutic efficacy. Lately, one of the novel approaches has been developed based on lipid-based liquid crystals. The lyotropic liquid crystal (LLC) systems consist of amphiphilic molecules and are formed in presence of solvents with the most common types being cubic, hexagonal and lamellar mesophases. LC injectables have been recently developed based on polar lipids that spontaneously form liquid crystal nanoparticles in aqueous tissue environments to create the in-situ long-acting sustained-release depot to provide treatment efficacy over extended periods. In this manuscript, we have consolidated and summarized the various type of liquid crystals, recent formulation advancements, analytical evaluation, and therapeutic application of lyotropic liquid crystals in the field of parenteral sustained release drug delivery.

Liquid crystal nanoparticle platform for increased efficacy of cationic antimicrobials against biofilm infections

Bacterial biofilm infections tolerate high concentrations of antibiotics and are insidiously challenging to treat. Liquid crystal nanoparticles (LCNPs) advance the efficacy of tobramycin in biofilm-related infections by increasing the penetration of antibiotics across the biofilm matrix. Herewith, we develop the LCNPs as a platform technology, demonstrating that the LCNPs can increase the efficacy of two antibiotic classes (i.e. aminoglycosides and colistin) in P. aeruginosa biofilm infections. In C. elegans, the LCNPs potentiated the antimicrobial effect and significantly improved the survival of the nematodes. In mice with a full-thickness excisional wound, LCNPs were non-toxic and did not impair wound repair. Compared to the unformulated antibiotic treatment, tobramycin-LCNPs reduced the chronic bacterial load by 100-fold in the wound. This was also emulated in an ex vivo P. aeruginosa porcine wound infection model. The LCNPs represent a versatile platform technology that improves the efficacy of cationic antibiotics against biofilm infections utilizing multiple administration routes.

Targeting foodborne pathogens via surface-functionalized nano-antimicrobials

The incorporation of antibiotics and bioactive compounds into non-toxic nanoparticles has been popularly used to produce effective antimicrobial nanocarriers against foodborne pathogens. These systems can protect antimicrobials against harsh environments, control their release, and increase their antimicrobial activities; however, their functions can be decreased by some major barriers. Intracellular localization of bacteria protects them from the host immune system and antimicrobial agents. Also, bacteria can cause constant infection by nestling in professional phagocytic cells. In the last years, surface functionalization of nanocarriers by passive and active modification methods has been applied for their protection against clearance from the blood, increasing both circulation time and uptake by target cells. For achieving this objective, different functional agents such as specifically targeted peptides internalize ligands, saccharide ligands, or even therapeutic molecules (e.g., antibodies or enzymes) are used. In this review, techniques for functionalizing the surface of antimicrobial-loaded nanocarriers have been described. This article offers a comprehensive review of the potential of functional nanoparticles to increase the performance of antimicrobials against foodborne pathogens through targeting delivery.

Cubosomes and Hexosomes as Novel Nanocarriers for Bioactive Compounds

Cubosomes and hexosomes are nanostructured liquid crystalline particles, known as biocompatible nanocarriers for drug delivery. In recent years, there has been good interest in using cubosomes and hexosomes for the delivery of bioactive compounds in functional foods. These systems feature thermodynamic stability, encapsulate both hydrophobic and hydrophilic substances, and have a high tolerance to environmental stresses and potential for controlled release. This review outlines the recent advances in cubosomes and hexosomes in the food industry, focusing on their structure, composition, formation mechanisms, and factors influencing phase transformation between cubosomes and hexosomes. The potential applications especially for the bioactive delivery are presented. The integration of cubosomes and hexosomes with other emerging encapsulation technologies such as surface coating, gelation, and incorporation of polymers are also discussed.

Human Antimicrobial Peptide Triggered Colloidal Transformations in Bacteria Membrane Lipopolysaccharides

Growing concerns of bacterial resistance against conventional antibiotics shifts the research focus toward antimicrobial peptide (AMP)-based materials. Most AMPs kill gram-negative bacteria by destroying their inner membrane, but have to first pass the outer membrane covered with lipopolysaccharides (LPS). Their interplay with the LPS is crucial for bactericidal activity, but is yet to be elucidated in detail. In this study, self-assemblies of Escherichia coli LPS with the human cathelicidin AMP LL-37, free and encapsulated into glyceryl monooleate (GMO) lipid nanoparticles, are analyzed using synchrotron small angle X-ray scattering, dynamic light scattering, and cryogenic transmission electron microscopy. Circular dichroism spectroscopy is used to study modifications in LL-37's secondary structure. LPS is found to form elongated micelles and the addition of LL-37 induces their transformation to multilamellar structures. LPS' addition to GMO cubosomes triggers the swelling of the internal cubic structure, while in multilamellar GMO/LL-37 nanocarriers it causes transitions into unstructured particles. The insights on the interactions among LPS and LL-37, in its free form or encapsulated in GMO dispersions, may guide the design of LPS-responsive antimicrobial nanocarriers. The findings may further assist the formulation of antimicrobial nanomaterials with enhanced penetration of LPS layers for improved destruction of bacterial membranes.

A polytherapy based approach to combat antimicrobial resistance using cubosomes

A depleted antimicrobial drug pipeline combined with an increasing prevalence of Gram-negative ‘superbugs’ has increased interest in nano therapies to treat antibiotic resistance. As cubosomes and polymyxins disrupt the outer membrane of Gram-negative bacteria via different mechanisms, we herein examine the antimicrobial activity of polymyxin-loaded cubosomes and explore an alternative strategy via the polytherapy treatment of pathogens with cubosomes in combination with polymyxin. The polytherapy treatment substantially increases antimicrobial activity compared to polymyxin B-loaded cubosomes or polymyxin and cubosomes alone. Confocal microscopy and neutron reflectometry suggest the superior polytherapy activity is achieved via a two-step process. Firstly, electrostatic interactions between polymyxin and lipid A initially destabilize the outer membrane. Subsequently, an influx of cubosomes results in further membrane disruption via a lipid exchange process. These findings demonstrate that nanoparticle-based polytherapy treatments may potentially serve as improved alternatives to the conventional use of drug-loaded lipid nanoparticles for the treatment of “superbugs”.

An increasing prevalence of Gram-negative bacteria increases the interest in nanotherapies to treat antibiotic resistance. Here, the authors examine the antimicrobial activity of polymyxin-loaded cubosomes and explore a polytherapy treatment of pathogens with cubosomes in combination with polymyxin.

Cubosomes as an emerging platform for drug delivery: a state-of-the-art review

Lipid-based drug delivery nanoparticles, including non-lamellar type, mesophasic nanostructured materials of lyotropic liquid crystals (LLCs), have been a topic of interest for researchers for their applications in encapsulation of drugs...

Host defense peptides as immunomodulators: The other side of the coin

Host defense peptides (HDPs) exhibit a broad range of antimicrobial and immunomodulatory activities. In this sense, both functions are like different sides of the same coin. The direct antimicrobial side was discovered first, and widely studied for the development of anti-infective therapies. In contrast, the immunomodulatory side was recognized later and in the last 20 years the interest in this field has been continuously growing. Different to their antimicrobial activities, the immunomodulatory activities of host defense peptides are more effective in vivo. They offer a great opportunity for new therapeutic applications in the fields of anti-infective therapy, chronic inflammatory diseases treatment, novel vaccine adjuvants development and anticancer immunotherapy. These immune related functions of HDPs includes chemoattraction of leukocytes, modulation of inflammation, enhancement of antigen presentation and polarization of adaptive immune responses. Our attempt with this review is to make a careful evaluation of different aspects of the less explored, but attractive immunomodulatory side of the HDP functional coin.

Current Advances in Lipid and Polymeric Antimicrobial Peptide Delivery Systems and Coatings for the Prevention and Treatment of Bacterial Infections

Bacterial infections constitute a threat to public health as antibiotics are becoming less effective due to the emergence of antimicrobial resistant strains and biofilm and persister formation. Antimicrobial peptides (AMPs) are considered excellent alternatives to antibiotics; however, they suffer from limitations related to their peptidic nature and possible toxicity. The present review critically evaluates the chemical characteristics and antibacterial effects of lipid and polymeric AMP delivery systems and coatings that offer the promise of enhancing the efficacy of AMPs, reducing their limitations and prolonging their half-life. Unfortunately, the antibacterial activities of these systems and coatings have mainly been evaluated in vitro against planktonic bacteria in less biologically relevant conditions, with only some studies focusing on the antibiofilm activities of the formulated AMPs and on the antibacterial effects in animal models. Further improvements of lipid and polymeric AMP delivery systems and coatings may involve the functionalization of these systems to better target the infections and an analysis of the antibacterial activities in biologically relevant environments. Based on the available data we proposed which polymeric AMP delivery system or coatings could be profitable for the treatment of the different hard-to-treat infections, such as bloodstream infections and catheter- or implant-related infections.

Antimicrobial peptides - Unleashing their therapeutic potential using nanotechnology

Antimicrobial peptides (AMPs) are potent, mostly cationic, and amphiphilic broad-spectrum host defense antimicrobials that are produced by all organisms ranging from prokaryotes to humans. In addition to their antimicrobial actions, they modulate inflammatory and immune responses and promote wound healing. Although they have clear benefits over traditional antibiotic drugs, their wide therapeutic utilization is compromised by concerns of toxicity, stability, and production costs. Recent advances in nanotechnology have attracted increasing interest to unleash the AMPs' immense potential as broad-spectrum antibiotics and anti-biofilm agents, against which the bacteria have less chances to develop resistance. Topical application of AMPs promotes migration of keratinocytes and fibroblasts, and contributes significantly to an accelerated wound healing process. Delivery of AMPs by employing nanotechnological approaches avoids the major disadvantages of AMPs, such as instability and toxicity, and provides a controlled delivery profile together with prolonged activity. In this review, we provide an overview of the key properties of AMPs and discuss the latest developments in topical AMP therapy using nanocarriers. We use chronic hard-to-heal wounds-complicated by infections, inflammation, and stagnated healing-as an example of an unmet medical need for which the AMPs' wide range of therapeutic actions could provide the most potential benefit. The use of innovative materials and sophisticated nanotechnological approaches offering various possibilities are discussed in more depth.

Lipid Nanocarriers for Anti-HIV Therapeutics: A Focus on Physicochemical Properties and Biotechnological Advances

Since HIV was first identified, and in a relatively short period of time, AIDS has become one of the most devastating infectious diseases of the 21st century. Classical antiretroviral therapies were a major step forward in disease treatment options, significantly improving the survival rates of HIV-infected individuals. Even though these therapies have greatly improved HIV clinical outcomes, antiretrovirals (ARV) feature biopharmaceutic and pharmacokinetic problems such as poor aqueous solubility, short half-life, and poor penetration into HIV reservoir sites, which contribute to the suboptimal efficacy of these regimens. To overcome some of these issues, novel nanotechnology-based strategies for ARV delivery towards HIV viral reservoirs have been proposed. The current review is focused on the benefits of using lipid-based nanocarriers for tuning the physicochemical properties of ARV to overcome biological barriers upon administration. Furthermore, a correlation between these properties and the potential therapeutic outcomes has been established. Biotechnological advancements using lipid nanocarriers for RNA interference (RNAi) delivery for the treatment of HIV infections were also discussed.

Recent Advances and Challenges in Nanodelivery Systems for Antimicrobial Peptides (AMPs)

Antimicrobial peptides (AMPs) can be used as alternative therapeutic agents to traditional antibiotics. These peptides have abundant natural template sources and can be isolated from animals, plants, and microorganisms. They are amphiphilic and mostly net positively charged, and they have a broad-spectrum inhibitory effect on bacteria, fungi, and viruses. AMPs possess significant rapid killing effects and do not interact with specific receptors on bacterial surfaces. As a result, drug resistance is rarely observed with treatments. AMPs, however, have some operational problems, such as a susceptibility to enzymatic (protease) degradation, toxicity in vivo, and unclear pharmacokinetics. However, nanodelivery systems loaded with AMPs provide a safe mechanism of packaging such peptides before they exert their antimicrobial actions, facilitate targeted delivery to the sites of infection, and control the release rate of peptides and reduce their toxic side effects. However, nanodelivery systems using AMPs are at an early stage of development and are still in the laboratory phase of development. There are also some challenges in incorporating AMPs into nanodelivery systems. Herein, an insight into the nanotechnology challenges in delivering AMPs, current advances, and remaining technological challenges are discussed in depth.

Protective Liquid Crystal Nanoparticles for Targeted Delivery of PslG: A Biofilm Dispersing Enzyme

The glycoside hydrolase, PslG, attacks and degrades the dominant Psl polysaccharide in the exopolymeric substance (EPS) matrix of Pseudomonas aeruginosa biofilms and is a promising therapy to potentiate the effect of antibiotics. However, the need for coadministration with an antibiotic and the potential susceptibility of PslG to proteolysis highlights the need for an effective delivery system. Here, we compared liposomes versus lipid liquid crystal nanoparticles (LCNPs) loaded with PslG and tobramycin as potential formulation approaches to (1) protect PslG from proteolysis, (2) trigger the enzyme's release in the presence of bacteria, and (3) improve the total antimicrobial effect in vitro and in vivo in a Caenorhabditis elegans infection model. LCNPs were an effective formulation strategy for PslG and tobramycin that better protected the enzyme against proteolysis, triggered and sustained the release of PslG, improved the antimicrobial effect by 10-100-fold, and increased the survival of C. elegans infected with P. aeruginosa. Digestible LCNPs had the advantage of triggering the enzyme's release in the presence of bacteria. However, compared to nondigestible LCNPs, negligible differences arose between the LCNPs' ability to protect PslG from proteolysis and potentiate the antimicrobial activity in combination with tobramycin. In C. elegans, the improved antimicrobial efficacy was comparable to tobramycin-LCNPs, although the PslG + tobramycin-LCNPs achieved a greater than 10-fold reduction in bacteria compared to the unformulated combination. Herewith, LCNPs are showcased as a promising protective delivery system for novel biofilm dispersing enzymes combined with antibiotics, enabling infection-directed therapy and improved performance.

Nanostructured Antimicrobial Peptides: Crucial Steps of Overcoming the Bottleneck for Clinics

The security issue of human health is faced with dispiriting threats from multidrug-resistant bacteria infections induced by the abuse and misuse of antibiotics. Over decades, the antimicrobial peptides (AMPs) hold great promise as a viable alternative to treatment with antibiotics due to their peculiar antimicrobial mechanisms of action, broad-spectrum antimicrobial activity, lower drug residue, and ease of synthesis and modification. However, they universally express a series of disadvantages that hinder their potential application in the biomedical field (e.g., low bioavailability, poor protease resistance, and high cytotoxicity) and extremely waste the abundant resources of AMP database discovered over the decades. For all these reasons, the nanostructured antimicrobial peptides (Ns-AMPs), based on a variety of nanosystem modification, have made up for the deficiencies and pushed the development of novel AMP-based antimicrobial therapies. In this review, we provide an overview of the advantages of Ns-AMPs in improving therapeutic efficacy and biological stability, reducing side effects, and gaining the effect of organic targeting and drug controlled release. Then the different material categories of Ns-AMPs are described, including inorganic material nanosystems containing AMPs, organic material nanosystems containing AMPs, and self-assembled AMPs. Additionally, this review focuses on the Ns-AMPs for the effect of biological activities, with emphasis on antimicrobial activity, biosecurity, and biological stability. The "state-of-the-art" antimicrobial modes of Ns-AMPs, including controlled release of AMPs under a specific environment or intrinsic antimicrobial properties of Ns-AMPs, are also explicated. Finally, the perspectives and conclusions of the current research in this field are also summarized.

Bioinspired Antimicrobial Coatings from Peptide-Functionalized Liquid Crystalline Nanostructures

Surface-associated microbial infections and contaminations are a major challenge in various fields including the food and health sectors. This study demonstrates the design of antimicrobial coatings based on the self-assembly of the food-grade amphiphilic lipid glycerol monooleate with the human cathelicidin-derived antimicrobial peptide LL-37. Structural properties of the coating and their alterations with composition were studied using advanced experimental methods including synchrotron grazing-incidence small-angle X-ray scattering and ellipsometry. The integration of the LL-37 and its potential release from the nanostructured films into the surrounding solution was characterized with confocal Raman microscopy. Additional biological evaluation studies with clinically relevant bacterial strains, namely, Pseudomonas aeruginosa (Gram-negative) and Staphylococcus aureus (Gram-positive), were performed to investigate the antimicrobial activity of the coatings. Significant killing activity of the coating was found against both bacterial strains. The presented findings contribute to the fundamental understanding of lipid-peptide self-assembly on the surface and may open up a promising strategy for designing simple, sustainable antimicrobial coatings for medical and food applications.

Novel Amphiphilic Block Copolymers for the Formation of Stimuli-Responsive Non-Lamellar Lipid Nanoparticles

Non-lamellar lyotropic liquid crystalline (LLC) lipid nanoparticles contain internal multidimensional nanostructures such as the inverse bicontinuous cubic and the inverse hexagonal mesophases, which can respond to external stimuli and have the potential of controlling drug release. To date, the internal LLC mesophase responsiveness of these lipid nanoparticles is largely achieved by adding ionizable small molecules to the parent lipid such as monoolein (MO), the mixture of which is then dispersed into nanoparticle suspensions by commercially available poly(ethylene oxide)-poly(propylene oxide) block copolymers. In this study, the Reversible Addition-Fragmentation chain Transfer (RAFT) technique was used to synthesize a series of novel amphiphilic block copolymers (ABCs) containing a hydrophilic poly(ethylene glycol) (PEG) block, a hydrophobic block and one or two responsive blocks, i.e., poly(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl acrylate) (PTBA) and/or poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA). High throughput small angle X-ray scattering studies demonstrated that the synthesized ABCs could simultaneously stabilize a range of LLC MO nanoparticles (vesicles, cubosomes, hexosomes, inverse micelles) and provide internal particle nanostructure responsiveness to changes of hydrogen peroxide (H2O2) concentrations, pH and temperature. It was found that the novel functional ABCs can substitute for the commercial polymer stabilizer and the ionizable additive in the formation of next generation non-lamellar lipid nanoparticles. These novel formulations have the potential to control drug release in the tumor microenvironment with endogenous H2O2 and acidic pH conditions.

Antimicrobial Polymer-Based Assemblies: A Review

An antimicrobial supramolecular assembly (ASA) is conspicuous in biomedical applications. Among the alternatives to overcome microbial resistance to antibiotics and drugs, ASAs, including antimicrobial peptides (AMPs) and polymers (APs), provide formulations with optimal antimicrobial activity and acceptable toxicity. AMPs and APs have been delivered by a variety of carriers such as nanoparticles, coatings, multilayers, hydrogels, liposomes, nanodisks, lyotropic lipid phases, nanostructured lipid carriers, etc. They have similar mechanisms of action involving adsorption to the cell wall, penetration across the cell membrane, and microbe lysis. APs, however, offer the advantage of cheap synthetic procedures, chemical stability, and improved adsorption (due to multipoint attachment to microbes), as compared to the expensive synthetic routes, poor yield, and subpar in vivo stability seen in AMPs. We review recent advances in polymer-based antimicrobial assemblies involving AMPs and APs.