Janus Nanofilms

Functionalizing a Polyelectrolyte Complex with Chitosan Derivatives to Tailor Membrane Surface Properties

Polyelectrolyte complex (PEC) materials show promise in the development of tunable membranes for aqueous and organic solvent separations, as well as in the creation of surface layers for fouling control. In this study, we developed a polyelectrolyte complex (PEC) functionalized by negatively charged carboxymethyl chitosan (CMC-) and positively charged quaternized chitosan (QC+) to tailor its surface properties and antibacterial efficacy. CMC- and QC+ were prepared and characterized using FT-IR and ¹H NMR, which confirmed the presence of the carboxymethyl group and trimethylammonium group in CMC- and QC+ with 65.6% and 83.9% substitution, respectively. The CMC- functionalized PEC (CMC-/PEC) and QC+ functionalized PEC materials (QC+/PEC) were evaluated for their stability in water, resistance to organic and inorganic adsorption, and antibacterial action against a model microorganism, Pseudomonas putida. The results showed no release of chitosan derivatives after adsorption, and CMC-/PEC and QC+/PEC exhibited charge-based, selective repulsion of model organic and inorganic substances. Moreover, the functionalized PEC surfaces displayed lower bacterial attachment due to their smoother surfaces as compared to the bare ceramic membrane and their antimicrobial properties. Among the PEC samples, CMC-/PEC had the lowest cell attachment, while QC+/PEC showed the highest attachment due to electrostatic attraction. The ceramic and bare PEC surfaces were negligibly bactericidal, while cell viability decreased to 34.4 ± 10.2% and 30.6 ± 8.2% with the CMC-/PEC and QC+/PEC surfaces, respectively. In the filtration experiments, the unmodified PEC and CMC-/PEC showed lower rates of flux decline due to organic fouling than did the bare ceramic or QC+/PEC due to electrostatic repulsion. Furthermore, PECs as protective layers promoted much higher flux recoveries than simply backwashing the uncoated membranes. This surface tunability, then, enhances the potential of PECs either as fouling resistant materials or as a method to create a sacrificial, protective layer on surfaces that once fouled can be dissolved and re-established.

Durable Light-Driven Three-Dimensional Smart Switchable Superwetting Nanotextile as a Green Scaled-Up Oil-Water Separation Technology

Stimuli-responsive polymer architectures are attracting a lot of interest, but it still remains a great challenge to develop effective industrial-scale strategies. A single-stage and cost-effective approach was applied to fabricate a three-dimensional (3D) smart responsive surface with fast and reversibly switchable wetting between superhydrophobicity and superhydrophilicity/underwater superoleophobicity properties induced by photo and heat stimuli. Commercially available PVDF and P25TiO₂ as starting materials fabricated with a scaled-up electrospinning approach were applied to prepare 3D smart switchable PVDF-P25TiO₂ nanotextile superwetted by both UV and solar light that is simply recovered by heat at a reasonable time. The superhydrophilic/underwater superoleophobic photo-induced nanotextile will act in "water-removing" mode in which water quickly passes through and the oil is blocked on the surface. An acceptable recycling, reusing, and superior antifouling and self-cleaning performance arising from a TiO₂ photocatalytic effect makes it highly desired in a green scaled-up industry oily wastewater treatment technology. With these advantages, a large-scale industrial production process can be simply simulated by applying a conducting mesh-like collector substrate.

Nafion-Based Low-Hydration Polyelectrolyte Multilayer Membranes for Enhanced Water Purification

The increase of micropollutant concentration in both surface and groundwater is an emerging concern for the environment and human health. Most of such small organic molecules (medicines, hormones, and plasticizers) enter the environment via our wastewater, because they are not sufficiently removed by the current techniques applied in wastewater treatment plants. A possible solution to remove micropollutants is the usage of polyelectrolyte multilayer (PEM) based membranes. PEM membranes have received a growing interest in the past decade due to their high chemical and physical stability and their high permeability and selectivity. A popular polyelectrolyte pair to make dense PEM membranes with high salt retentions is the combination of poly(allylamine hydrochloride) (PAH) and poly(sodium 4-styrenesulfonate) (PSS). Unfortunately, smaller micropollutants (such as bisphenol A, sulfamethoxazole, naproxen, and bezafibrate) still show significant permeation through this membrane. In this study, for the first time, a single final layer of Nafion is applied on the PEM to increase the density of the PEM membrane. It is shown that when terminating with Nafion, the swelling of the multilayer decreases by 50%. These pronounced changes in layer structure are reflected by changes in membrane performance, such as a lower molecular weight cutoff (MWCO) and an increasing hydraulic membrane resistance. Furthermore, we show that the Nafion content of the multilayer can be increased by constructing a Nafion/PAH multilayer on top of the existing PSS/PAH multilayer, thereby lowering the MWCO. Although hydraulic resistance increases, these PSS/PAH/Nafion-based multilayers show excellent performance in rejecting difficult-to-remove micropollutants that have low molecular weight (200-650 Da) and different charges. Overall, a cocktail of eight small micropollutants can be removed up to 97% by these membranes, allowing strongly enhanced water purification.

Versatile and High-Throughput Polyelectrolyte Complex Membranes via Phase Inversion

High-flux filtration membranes constructed through scalable and sustainable methods are desirable for energy-efficient separations. Often, these criteria are difficult to be reconciled with one another. Polymeric membranes can provide high flux but frequently involve organic solvents in processing steps. Solubility of many polymeric membranes in organic media also restricts their implementation in solvent filtration. In the present work, we report a simple and high-throughput aqueous processing approach for polyelectrolyte complex (PEC) membranes with controllable porosity and stability in various aqueous and organic environments. PECs are materials composed of oppositely charged polymer chains that can form solids in aqueous environments, yet which can be dissolved in very specific salt solutions capable of breaking the interpolymer ion pairs. By exploiting the salt-induced dissolution and subsequent reformation of the complex, nano- to microporous films are rapidly synthesized which resemble membranes obtained through conventional solvent-phase inversion techniques. PECs remain stable in organic solvents because of the low dielectric constant of the environment, which enhances electrostatic interactions, making them suitable for a wide range of water and solvent filtration applications. Here, we elucidate how the polymer-phase behavior can be manipulated to exercise morphological control, test membrane performance for water and solvent filtration, and quantify the mechanical stability of PECs in relevant conditions.

pH-Responsive Janus Film Constructed with Hydrogen-Bonding Assembly and Dopamine Chemistry

Poly(acrylic acid) (PAA) was partially grafted with dopamine (PAA-dopa), and then layer-by-layer assembled with poly(vinylpyrrolidone) (PVPON) to prepare hydrogen-bonded (PVPON/PAA-dopa) _n film. Polydopamine (PDA) was deposited on (PVPON/PAA-dopa) _n film in the presence of oxidant, and hence the whole (PVPON/PAA-dopa) _nPDA film was cross-linked. (PVPON/PAA-dopa) _nPDA could be utilized as a platform to produce the free-standing Janus film because of the easy detaching process and various chemical reactivity of PDA layer. Ag nanoparticles were formed on (PVPON/PAA-dopa) _nPDA film by electroless metallization. 1 H,1 H,2 H,2 H-Perfluorodecanethiol (PFDT) was used to further modify the film through Michael addition. After detaching from the substrate, (PVPON/PAA-dopa)₂₀PDA/Ag/PFDT exhibits reversible swelling-shrinking behavior as the pH value changes. This free-standing film shows Janus character, one side is hydrophobic, whereas the other side is hydrophilic. In addition, the hydrophobic surface exhibits a surface-enhanced Raman scattering effect, whereas the hydrophilic side does not.

Solvent-driven actuators based on soft Janus films of homogeneous composition

A Janus PDMS film with quick bending responsiveness to solvents shows great potential as a solvent-driven actuator for numerous applications.