Thermoresponsive Polymers for Nuclear Medicine: Which Polymer Is the Best?

Understanding, Mimicking, and Mitigating Radiolytic Damage to Polymers in Liquid Phase Transmission Electron Microscopy

Advances in liquid phase transmission electron microscopy (LP-TEM) have enabled the monitoring of polymer dynamics in solution at the nanoscale, but radiolytic damage during LP-TEM imaging limits its routine use in polymer science. This study focuses on understanding, mimicking, and mitigating radiolytic damage observed in functional polymers in LP-TEM. It is quantitatively demonstrated how polymer damage occurs across all conceivable (LP-)TEM environments, and the key characteristics and differences between polymer degradation in water vapor and liquid water are elucidated. Importantly, it is shown that the hydroxyl radical-rich environment in LP-TEM can be approximated by UV light irradiation in the presence of hydrogen peroxide, allowing the use of bulk techniques to probe damage at the polymer chain level. Finally, the protective effects of commonly used hydroxyl radical scavengers are compared, revealing that the effectiveness of graphene's protection is distance-dependent. The work provides detailed methodological guidance and establishes a baseline for polymer degradation in LP-TEM, paving the way for future research on nanoscale tracking of shape transitions and drug encapsulation of polymer assemblies in solution.

Thermoresponsive Zinc TetraPhenylPorphyrin Photosensitizer/Dextran Graft Poly(N-IsoPropylAcrylAmide) Copolymer/Au Nanoparticles Hybrid Nanosystem: Potential for Photodynamic Therapy Applications

The thermoresponsive Zinc TetraPhenylPorphyrin photosensitizer/Dextran poly (N-isopropylacrylamide) graft copolymer/Au Nanoparticles (ZnTPP/D-g-PNIPAM/AuNPs) triple hybrid nanosystem was synthesized in aqueous solution as a nanodrug for potential use in thermally driven and controlled photodynamic therapy applications. The aqueous solution of the nanosystem has demonstrated excellent stability in terms of aggregation and sedimentation several days after preparation. Optimal concentrations of the components of hybrid nanosystem providing the lowest level of aggregation and the highest plasmonic enhancement of electronic processes in the photosensitizer molecules have been determined. It has been revealed that the shrinking of D-g-PNIPAM macromolecule during a thermally induced phase transition leads to the release of both ZnTPP molecules and Au NPs from the ZnTPP/D-g-PNIPAM/AuNPs macromolecule and the strengthening of plasmonic enhancement of the electronic processes in ZnTPP molecules bound with the polymer macromolecule. The 2.7-fold enhancement of singlet oxygen photogeneration under resonant with surface plasmon resonance has been observed for ZnTPP/D-g-PNIPAM/AuNPs proving the plasmon nature of such effect. The data obtained in vitro on wild strains of Staphylococcus aureus have proved the high potential of such nanosystem for rapid photodynamic inactivation of microorganisms particular in wounds or ulcers on the body surface.

Polymer-Based Nanofiber-Nanoparticle Hybrids and Their Medical Applications

The search for higher-quality nanomaterials for medicinal applications continues. There are similarities between electrospun fibers and natural tissues. This property has enabled electrospun fibers to make significant progress in medical applications. However, electrospun fibers are limited to tissue scaffolding applications. When nanoparticles and nanofibers are combined, the composite material can perform more functions, such as photothermal, magnetic response, biosensing, antibacterial, drug delivery and biosensing. To prepare nanofiber and nanoparticle hybrids (NNHs), there are two primary ways. The electrospinning technology was used to produce NNHs in a single step. An alternate way is to use a self-assembly technique to create nanoparticles in fibers. This paper describes the creation of NNHs from routinely used biocompatible polymer composites. Single-step procedures and self-assembly methodologies are used to discuss the preparation of NNHs. It combines recent research discoveries to focus on the application of NNHs in drug release, antibacterial, and tissue engineering in the last two years.

Equilibrium Swelling of Biocompatible Thermo-Responsive Copolymer Gels

Biomedical applications of thermo-responsive (TR) hydrogels require these materials to be biocompatible, non-cytotoxic, and non-immunogenic. Due to serious concerns regarding potential toxicity of poly(N-isopropylacrylamide) (PNIPAm), design of alternative homo- and copolymer gels with controllable swelling properties has recently become a hot topic. This study focuses on equilibrium swelling of five potential candidates to replace PNIPAm in biomedical and biotechnological applications: poly(N-vinylcaprolactam), poly(vinyl methyl ether), poly(N,N-dimethyl amino ethyl methacrylate), and two families of poly(2-oxazoline)s, and poly(oligo(ethylene glycol) methacrylates). To evaluate their water uptake properties and to compare them with those of substituted acrylamide gels, a unified model is developed for equilibrium swelling of TR copolymer gels with various types of swelling diagrams. Depending on the strength of hydrophobic interactions (high, intermediate, and low), the (co)polymers under consideration are split into three groups that reveal different responses at and above the volume phase transition temperature.

Copolymer chain formation of 2-oxazolines by in situ 1H-NMR spectroscopy: dependence of sequential composition on substituent structure and monomer ratios

In situ 1H NMR characterization of copolymerization reactions of various 2-oxazoline monomers at different molar ratios offers detailed insight into the build-up and composition of the polymer chains. Various 2-oxazolines were copolymerized in one single solvent, butyronitrile, with 2-dec-9'-enyl-2-oxazoline, where the double bond allows for post-polymerization modification and can function as a crosslinking unit to form polymer networks. The types of the monomers and their molar ratios in the feed have a strong effect on the microstructure of the forming copolymer chains. Copolymers comprising 2-dec-9'-enyl-2-oxazoline and either 2-ethyl-, 2-isopropyl-, 2-butyl-, 2-heptyl, 2-nonyl- or 2-phenyl-2-oxazoline, show significant differences in sequential structure of copolymers ranging from block to gradient and random ordering of the monomer units. 1H NMR was found to be a powerful tool to uncover detailed oxazoline copolymerization kinetics and evolution of chain composition.

Enhancing and Mitigating Radiolytic Damage to Soft Matter in Aqueous Phase Liquid-Cell Transmission Electron Microscopy in the Presence of Gold Nanoparticle Sensitizers or Isopropanol Scavengers

In this work, we describe the radiolytic environment experienced by a polymer in water during liquid-cell transmission electron microscopy (LCTEM). We examined the radiolytic environment of aqueous solutions of poly(ethylene glycol) (PEG, 2400 g/mol) in the presence of sensitizing gold nanoparticles (GNPs, 100 nm) or radical scavenging isopropanol (IPA). To quantify polymer damage, we employed post-mortem analysis via matrix-assisted laser desorption/ionization imaging mass spectrometry (MALDI-IMS). This approach confirms IPA (1-10% w/v) can significantly mitigate radiolysis-induced damage to polymers in water, while GNPs significantly enhance damage. We couple LCTEM experiments with simulations to provide a generalizable strategy for assessing radiolysis mitigation or enhancement. This study highlights the caution required for LCTEM experiments on inorganic nanoparticles where solution phase properties of surrounding organic materials or the solvent itself are under investigation. Furthermore, we anticipate an increased use of scavengers for LCTEM studies of all kinds.

Thermoresponsive properties of polyacrylamides in physiological solutions

We show that the cloud point temperature (TCP) of thermoresponsive polyacrylamides is considerably lower in physiologically relevant solvents (phosphate-buffered saline, serum) than in pure water. This decrease of TCP may be critical for some biomedical applications.

Internal Structure of Thermoresponsive Physically Crosslinked Nanogel of Poly[N-(2-hydroxypropyl)methacrylamide]-Block-Poly[N-(2,2-difluoroethyl)acrylamide], Prominent 19F MRI Tracer

Fluorine-19 MRI is a promising noninvasive diagnostic method. However, the absence of a nontoxic fluorine-19 MRI tracer that does not suffer from poor biodistribution as a result of its strong fluorophilicity is a constant hurdle in the widespread applicability of this otherwise versatile diagnostic technique. The poly[N-(2-hydroxypropyl)methacrylamide]-block-poly[N-(2,2-difluoroethyl)acrylamide] thermoresponsive copolymer was proposed as an alternative fluorine-19 MRI tracer capable of overcoming such shortcomings. In this paper, the internal structure of self-assembled particles of this copolymer was investigated by various methods including 1D and 2D NMR, dynamic light scattering (DLS), small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS). The elucidated structure appears to be that of a nanogel with greatly swollen hydrophilic chains and tightly packed thermoresponsive chains forming a network within the nanogel particles, which become more hydrophobic with increasing temperature. Its capacity to provide a measurable fluorine-19 NMR signal in its aggregated state at human body temperature was also investigated and confirmed. This capacity stems from the different fluorine-19 nuclei relaxation properties compared to those of hydrogen-1 nuclei.

The role of osmolytes in the temperature-triggered conformational transition of poly(N-vinylcaprolactam): an experimental and computational study

Biomedical industries are widely exploring the use of thermo-responsive polymers (TRPs) in the advanced development of drug delivery and in many other pharmaceutical applications. There is a great need to investigate the use of less toxic and more (bio-)compatible TRPs employing several additives, which could modify the conformational transition behavior of TRPs in aqueous solution. To move forward in this aspect, we have chosen the less toxic bio-based polymer poly(N-vinylcaprolactam) (PVCL) and three different methylamine-based osmolytes, trimethylamine N-oxide (TMAO), betaine and sarcosine, in order to investigate their particular interactions with the polymer segments in PVCL and therefore the corresponding changes in the thermo-responsive conformational behavior. Several biophysical techniques, UV-visible spectroscopy, fluorescence spectroscopy, dynamic light scattering (DLS) and laser Raman spectroscopy, as well as classical computer simulation methods such as molecular dynamics are employed in the current work. All the studied methylamines are found to favor the hydrophobic collapse of the polymer thus stabilizing the globular state of PVCL. Sarcosine is observed to cause the maximum decrease in lower critical solution temperature (LCST) of PVCL followed by TMAO and then betaine. The differences observed in the LCST values of PVCL in the presence of these molecules can be attributed to the different polymer-osmolyte interactions. The less sterically hindered N atom in the case of sarcosine causes a significant difference in the phase transition temperature values of PVCL compared to betaine and TMAO, where the nitrogen atom is buried by three methyl groups attached to it.

Efficacy of several additives to modulate the phase behavior of biomedical polymers: A comprehensive and comparative outlook

Several new classes of polymeric materials are being introduced with unique properties. Thermoresponsive polymers (TRPs) are one of the most fascinating and emerging class of biomaterials in biomedical research. The design of TRPs with good response to temperature and its ability to exhibit coil to globular transition behavior near to physiological temperature made them more promising materials in the field of biomaterials and biomedicines. Instead of numerous studies on TRPs, the mechanistic interplay among several additives and TRPs is still not understood clearly and completely. The lack of complete understanding of biomolecular interactions of various additives with TRPs is limiting their applications in interdisciplinary science as well as pharmaceutical industry. There is a great need to provide a collective and comprehensive information of various additives and their behavior on widely accepted biopolymers, TRPs such as poly(N-isopropylacrylamide) (PNIPAM), poly(vinyl methyl ether) (PVME), poly(N-vinylcaprolactum) (PVCL) and poly(ethylene glycol)-poly(propylene glycol)-poly(ethylene glycol) (PEG-PPG-PEG) in aqueous solution. Obviously, as the literature on the influence of various additives on TRPs is very vast, therefore we focus our review only on these four selected TRPs. Additives such as polyols, methylamines, surfactants and denaturants basically made the significant changes in water structure associated to polymer via their entropy variation which is the direct influence of their directly or indirectly binding abilities. Eventually, this review addresses a brief overview of the most recent literature of applications based phase behavior of four selected TRPs in response to external stimuli. The work enhances the knowledge for use of TRPs in the advanced development of drug delivery system and in many more pharmaceutical applications. These kinds of studies provide powerful impact in exploring the utility range of polymeric materials in various field of science.

Thermosensitive Nanosystems Associated with Hyperthermia for Cancer Treatment

Conventional chemotherapy regimens have limitations due to serious adverse effects. Targeted drug delivery systems to reduce systemic toxicity are a powerful drug development platform. Encapsulation of antitumor drug(s) in thermosensitive nanocarriers is an emerging approach with a promise to improve uptake and increase therapeutic efficacy, as they can be activated by hyperthermia selectively at the tumor site. In this review, we focus on thermosensitive nanosystems associated with hyperthermia for the treatment of cancer, in preclinical and clinical use.

Tunable Thermo-Responsive Copolymers from DEGMA and OEGMA Synthesized by RAFT Polymerization and the Effect of the Concentration and Saline Phosphate Buffer on its Phase Transition

Thermo-responsive polymers and copolymers derivatives of oligo(ethylene glycol) methyl ether methacrylate (Mn = 300 g mol-1) (OEGMA) and di(ethylene glycol) methyl ether methacrylate (DEGMA) have been synthesized by reversible addition fragmentation chain transfer polymerization (RAFT) using 5-amino-4-methyl-4-(propylthiocarbonothioylthio)-5-oxopentanoic acid (APP) as chain transfer agent (CTA). The monomer conversion was evaluated by hydrogen nuclear magnetic resonance (1H-NMR); number average molecular weights (Mn), weight average molecular weight (Mw), and dispersity (Đ) were obtained by gel permeation chromatography (GPC); glass transition temperature (Tg) was evaluated by modulated differential scanning calorimetry (DSC), cloud point temperature (Tcp) was measured and compared by turbidimetry and dynamic light scattering (DLS). The effect of polymer composition and concentration on the Tcp, either in water or in phosphate buffer saline (PBS), was studied. The values of Tcp using PBS were between 3 and 4 °C lower than using water. Results showed an ideal copolymerization behavior; therefore, the Tcp could be tuned by an adequate monomers feed ratio obtaining polymers which may be used in drug delivery and other applications.

Temperature Driven Transformation in Dextran-Graft-PNIPAM/Embedded Silver Nanoparticle Hybrid System

During the last decade, stimuli-responsible polymers based on poly(N-isopropylacrylamide) having conformational transition in the range of physiological temperature have been discussed as novel drug delivery nanosystems. A star-like copolymer with a dextran core and grafted poly(N-isopropylacrylamide) arms (D-g-PNIPAM) was synthesized, characterized, and used as a matrix for silver sol preparation. The comparative study of the behavior of individual D-g-PNIPAM and the nanohybrid system D-g-PNIPAM/silver nanoparticles has been done in the temperature range near the lower critical solution temperature (LCST). The methods of Dynamic Light Scattering, small angle X-ray scattering, and UV-VIS absorption spectroscopy have been used. The existence of single nanoparticles and aggregated nanoparticles located in a limited polymer macromolecular volume was established. The increase of the temperature leads to slight aggregation of the silver nanoparticles at the LCST transition. Single nanoparticles do not aggregate with the temperature increase. The thermally induced collapse of end-grafted poly(N-isopropylacrylamide) chains above the LCST do not affect significantly the size characteristics of silver nanoparticles incorporated into the polymer matrix.

Hybrid κ-carrageenan-based polymers showing "schizophrenic" lower and upper critical solution temperatures and potassium responsiveness

Novel multiresponsive hybrid biocompatible systems of κ-carrageenan-graft-poly(2-isopropyl-2-oxazoline-co-2-butyl-2-oxazoline)s with unique combination of responsiveness to external stimuli were synthesized and studied. The polymer thermoresponsive behavior proved the existence of both lower and upper critical solution temperatures in aqueous milieu, forming gel at lower temperature, a solution at room temperature and cloudy nanophase-separated dispersion at elevated temperature. The limit temperatures can easily be adjusted by the polyoxazoline graft length and grafting density. Moreover, the polymer behavior is additionally dependent on the concentration of potassium ions. The polymers behave similarly as the original κ-carrageenan, and thus, the poly(2-alkyl-2-oxazoline) grafts do not decrease the ability of the κ-carrageenan to form the self-assembled structures. Molecular principles beyond this multistimuli-responsive behavior were elucidated with the use of dynamic light scattering, magnetic resonance and fluorescence measurements as well as atomic force microscopy. These polymers could be used in a wide range of biological applications demanding thermo- and potassium-responsiveness.

Self-Assembled Thermoresponsive Polymeric Nanogels for 19F MR Imaging

Magnetic resonance imaging using fluorinated contrast agents (¹⁹F MRI) enables to achive highcontrast in images due to the negligible fluorine background in living tissues. In this pilot study, we developed new biocompatible, temperature-responsive, and easily synthesized polymeric nanogels containing a sufficient concentration of magnetically equivalent fluorine atoms for ¹⁹F MRI purposes. The structure of the nanogels is based on amphiphilic copolymers containing two blocks, a hydrophilic poly[ N-(2-hydroxypropyl)methacrylamide] (PHPMA) or poly(2-methyl-2-oxazoline) (PMeOx) block, and a thermoresponsive poly[ N(2,2difluoroethyl)acrylamide] (PDFEA) block. The thermoresponsive properties of the PDFEA block allow us to control the process of nanogel self-assembly upon its heating in an aqueous solution. Particle size depends on the copolymer composition, and the most promising copolymers with longer thermoresponsive blocks form nanogels of suitable size for angiogenesis imaging or the labeling of cells (approximately 120 nm). The in vitro ¹⁹F MRI experiments reveal good sensitivity of the copolymer contrast agents, while the nanogels were proven to be noncytotoxic for several cell lines.

Influence of additives on thermoresponsive polymers in aqueous media: a case study of poly(N-isopropylacrylamide)

Thermoresponsive polymers (TRPs) in different solvent media have been studied over a long period and are important from both scientific and technical points of view.

Radiolabelled Polymeric Materials for Imaging and Treatment of Cancer: Quo Vadis?

Owing to their tunable blood circulation time and suitable plasma stability, polymer-based nanomaterials hold a great potential for designing and utilising multifunctional nanocarriers for efficient imaging and effective treatment of cancer. When tagged with appropriate radionuclides, they may allow for specific detection (diagnosis) as well as the destruction of tumours (therapy) or even customization of materials, aiming to both diagnosis and therapy (theranostic approach). This review provides an overview of recent developments of radiolabelled polymeric nanomaterials (natural and synthetic polymers) for molecular imaging of cancer, specifically, applying nuclear techniques such as positron emission tomography (PET) and single-photon emission computed tomography (SPECT). Different approaches to radiolabel polymers are evaluated from the methodical radiochemical point of view. This includes new bifunctional chelating agents (BFCAs) for radiometals as well as novel labelling methods. Special emphasis is given to eligible strategies employed to evade the mononuclear phagocytic system (MPS) in view of efficient targeting. The discussion encompasses promising strategies currently employed as well as emerging possibilities in radionuclide-based cancer therapy. Key issues involved in the clinical translation of radiolabelled polymers and future scopes of this intriguing research field are also discussed.

Multi-scale characterization of thermoresponsive dendritic elastin-like peptides

Elastin like peptides (ELPs)-polypeptides based on the protein elastin-are used widely as thermoresponsive components in biomaterials due to the presence of a sharp soluble-to-insoluble phase change at a characteristic transition temperature (T_t). While linear ELPs have been thoroughly studied, few investigations into branched ELPs have been carried out. Using lysine amino acids as branching and terminal units with 1-3 pentameric repeats between each branch, ELP dendrimers were prepared by solid-phase peptide synthesis with molecular weights as high as 14kDa. A conformation change from random coil to β-turn upon heating through the T_t, typical of ELPs, was observed by circular dichroism spectroscopy for all peptides. The high molecular weights of these peptides enabled the use of characterization techniques typically reserved for polymers. Variable-temperature small-angle X-ray scattering measurements in dilute solution revealed an increase in size and fractal dimension upon heating, even well below the T_t. These results were corroborated by cryogenic transmission electron microscopy, which confirmed the presence of aggregates below the T_t, and micro differential scanning calorimetry, which showed a broad endothermic peak below the T_t. These results collectively indicate the presence of a pre-coacervation step in the phase transition of ELP dendrimers.

New endeavours involving the cooperative behaviour of TMAO and urea towards the globular state of poly(N-isopropylacrylamide)

Studies have provided evidence for the destruction of the hydrogen bonds of poly(N-isopropylacrylamide) (PNIPAM) in the presence of osmolytes such as trimethylamine N-oxide (TMAO) and urea.

Thermoresponsive poly(2-oxazoline)s, polypeptoids, and polypeptides

Recent advances in thermoresponsive poly(2-oxazoline)s, polypeptoids, and polypeptides, with a specific focus on structure–property relationships, self-assembly, and applications, are reviewed.