Surface Chemistry of Gold Nanorods

Ti3C2 MXene/GNRs for synergistically highly enhanced sensitivity of optical fiber SPR acetylcholine biosensors via an electrostatic layer-by-layer assembly method

Improving the sensitivity of biosensor has always the major challenge to measure lower detection concentration of biological samples. In this paper, a novel optical fiber surface plasmon resonance (SPR) biosensor based on Ti3C2 MXene/GNRs synergistically highly enhanced sensitivity was proposed. The Ti3C2 MXene and GNRs were coated on the optical fiber sensing probe by the electrostatic layer-by-layer (ELBL) assembly method. The sensitivity of this optical fiber sensor was significantly improvement by 217.73% which largely benefited from the synergistic interaction between the increases of depth of evanescent wave and enhancement local electromagnetic field. The biosensors were successfully used to the high sensitivity detection of acetylcholine by immobilizing AchE as specific biorecognition molecules on the probe surface with PDA as the enzyme immobilization carrier. The sensitivity and LOD of the proposed biosensor for acetylcholine were 0.04521 nm/μM and 4.42 μM, respectively. The recovery rate of the biosensor in the actual samples detection were between 96 and 106%, and the response time was 220s. The proposed biosensor will provide a promising rapidly and accurately method for the detection of neurotransmitters in the clinic diagnosis.

Activatable Photoacoustic Probe for Imaging Infection: Gold Nanorod Dissociation In Vivo Reports Bacterial Protease Activity

We present a strategy for constructing activatable photoacoustic imaging (PAI) probes for in vivo enzyme activity measurements, based on a dissociation strategy previously applied to in vitro sensing. Unlike conventional nanoparticle aggregation strategies, dissociation minimizes false positives and functions effectively in complex biological environments. Overcoming the challenge of dissociating nanostructure aggregates, which arises from the strong van der Waals forces at short distances, we demonstrate the controlled assembly and dissociation of citrate-capped gold nanorods (AuNRs-citrate) using a diarginine peptide additive and a thiolated polyethylene glycol (HS-PEG-OMe), respectively. This assembly dissociation mechanism enables precise control of the optical and photoacoustic (PA) properties of AuNRs in both in vitro and in vivo settings. Building on these findings, we engineered an enzyme-sensitive PAI probe (AuNRs@RgpB) composed of AuNR assemblies and a PEG-peptide conjugate with a protease-specific cleavage sequence. The probe detects Arg-specific gingipain (RgpB), a protease expressed by Porphyromonas gingivalis associated with periodontal disease and Alzheimer's disease. Proteolytic cleavage of the peptide sequence triggers AuNR dissociation, resulting in enhanced PA signal output. The probe was designed to be injected intrathecally for preclinical trials to image gingipains and investigate the value of gingipain inhibitors developed for Alzheimer's disease. The probe's performance was characterized in vitro using UV-vis spectroscopy and PAI, achieving detection limits of 5 and 20 nM, respectively. In vivo studies involved intracranial injection of AuNRs@RgpB into RgpB-containing murine models, with PA monitoring over time. RgpB activity produced a four-fold PA signal increase within 2 h, while P. gingivalis-infected mice showed similar signal enhancement. Specificity was confirmed by negligible responses to Fusobacterium nucleatum, a non-RgpB-producing bacterium. Additionally, the system demonstrated utility in drug development by successfully monitoring the inhibition of RgpB activity using RgpB inhibitors (leupeptin and KYT-1) in vivo models. Beyond its immediate application to RgpB detection, this modular approach to plasmonic-based sensing holds significant potential for detecting other proteases, advancing both nanotechnology and protease-targeted diagnostics.

Photothermal Antibacterial Therapy of Near-Infrared II Region Laser Mediated by Gold Hollow Nanorod

The current traditional treatment for bacterial infections is to treat them with antibiotics, and the misuse of antibiotics can lead to an increase in bacterial resistance. In contrast, the development of new antibiotics is much slower than the speed of adaptation of drug-resistant bacteria, making it necessary to develop a drug that does not rely on antibiotics. Therefore, based on the advantages of photothermal therapy, NIR II-responsive gold hollow nanorods (GHNRs) were developed to overcome the limitation of bacterial drug resistance in conventional bacterial therapy. GHNRs can quickly respond to a 980 nm laser with a high photothermal conversion efficiency of 41.78%. The high temperature produced by GHNRs can effectively kill Staphylococcus aureus and Escherichia coli, providing a new strategy for the clinical treatment of bacterial infectious diseases without antibiotic dependence.

Gold Nanorods Decorated by Conjugated Microporous Polymers for Infrared Responsive Cytostatic Drug Delivery

Near-infrared (NIR) controlled drug delivery systems have drawn a lot of attention throughout the past few decades due to the deep penetration depth and comparatively minor side effects of the stimulus. In this study, we introduce an innovative approach for gastric cancer treatment by combining photothermal infrared-sensitive gold nanorods (AuNRs) with a conjugated microporous polymer (CMP) to create a drug delivery system tailored for transporting the cytostatic drug 5-fluorouracil (5-FU). CMPs are fully conjugated networks with high internal surface areas that can be precisely tailored to the adsorption and transport of active compounds through the right choice of chemical functionalities. By incorporation of surfactant-stabilized AuNRs into the CMP synthesis in dimethylformamide (DMF) the surfactant shell is destabilized and subsequently replaced by the CMP. Particularly, low initial surfactant concentrations led to uniform distribution of the AuNRs in the polymer matrix. Importantly, the integrated AuNRs maintain their plasmonic properties, as was confirmed via electron energy loss spectroscopy. Therefore, the significant photothermal properties are translated to the hybrid material as shown in a proof-of-principle experiment. Further, in an approximated gastric environment, 5-FU release studies were conducted with and without NIR stimulus. Thereby it was observed that increased Brownian motion due to the NIR irradiation not only accelerates the release but also increases the total released amount by influencing the adsorption-desorption equilibrium. This remarkable level of control of the release process underlines the immense potential of this hybrid material for precise and targeted drug delivery.

Intrinsic Chirality Modulation and Biosensing Application of Helical Gold Nanorods by Anisotropic Etching

The investigation of plasmonic chirality is a profound and intriguing topic, and the distinctive morphology of intrinsically chiral nanoparticles has prompted significant interest in the structure-activity relationship between particle morphology and chirality. In this work, the anisotropic etching of chiral helical gold nanorods (HGNRs) by a cetyltrimethylammonium bromide (CTAB)-HAuCl4 complex was observed with an interesting bidirectional variation of intrinsic chirality that initially enhanced and subsequently weakened, which was related with the diversity in CTAB distribution. In addition, an ultrasensitive and convenient sensing platform for acetylcholinesterase was developed based on the circular dichroism signal recovery of HGNRs caused by the dual inhibition of HGNR etching. The distinctive etching process and mechanism of chiral nanoparticles offer new insights into understanding the structural features and biochemical applications of the plasmonic intrinsic chirality, which could be applied to the acquisition of chiral nanoparticles and sensitive detection platform based on chiral signal changes.

Bimetallic FeCo-MOFs mediated Au nanorods etching for the multi-colorimetric and photothermal immunosensing of illegal additive

With the rapid expansion of the health food industry, the scope of safety supervision has also increased. However, traditional instrument detection methods cannot meet the requirements for the rapid on-site detection. Hence, the development of a rapid, precise, and simple method for the analysis of illegal additives in health foods is of great importance. In this work, by using FeCo-MOFs as mimetic peroxidase to mediate Au nanorods (Au NRs) etching, a dual-mode immunosensor based on multi-colorimetric and photothermal signals was fabricated to detect furosemide (FUR). In multi-colorimetric channel, the localized surface plasmon resonance (LSPR) peaks of Au NRs shifted blue, resulting in multi-color changes from red to gray to blue and finally to purple. In photothermal channel, the photothermal effect of Au NRs decreased, resulting in temperature changes. In the range of 1.0 × 10-5-1.0 × 10-2 μg/mL, both LSPR peak blue shift and temperature changes were linearly correlated with the logarithm of FUR concentration, with the detection limits were 4.9 × 10-6 and 8.5 × 10-6 μg/mL, respectively. Furthermore, its concentration can be accurately and intuitively assessed through the observation of vivid colorimetric changes. This advancement offers a highly promising approach for the on-site detection of FUR, facilitating timely and efficient monitoring, thereby significantly enhancing regulatory compliance and ensuring consumer safety.

Bio-Inspired Synthesis of Gold Nanoparticles Using Leaf Extract of Jamun and Research on Its Biomedical Potential

Background

Bio-based synthesis of metallic nanoparticles has garnered much attention in recent times owing to their non-toxic, environmentally friendly, and cost-effective nature.

Methods

In this study, gold nanoparticles (S4-GoNPs) were synthesized by a simple and environmentally friendly technique using an aqueous extract of jamun leaves (JLE) as an effective capping, stabilizer, and reducing agent. JLE was screened for the presence of phytochemicals followed by synthesis, characterization, and evaluation of their antibacterial, antidiabetic, antioxidant, and photocatalytic degradation potentials using standard established procedures.

Results

The phytochemical profile of JLE was found to be rich in flavonoids, tannins, terpenoid phenols, anthraquinones, and cardiac glycosides. Its GC-MS analysis revealed the presence of compounds majorly of them as the (1R)-2,6,6-Trimethylbicyclo[3.1.1]hept-2-ene (5.141%), 2(10)-pinene (4.119%), α-cyclopene (5.274%) α,α-muurolene (7.525%), naphthalene, 1,2,3,4,4a,5,6,8a-octahydro-7-methyl-4-methylene-1-(1-methylethyl)-(1.alpha.,4a.beta.,8a.alpha) (8.470%), delta-cadinene (23.246), α-guajene (3.451%), and gamma-muurolene (4.379%). The visual morphology and UV-Vis spectral surface plasmon resonance at 538 nm confirmed the successful synthesis of S4-GoNPs. The average particle size was determined as 120.5 nm with Pdi = 0.152, and -27.6 mV zeta potential. Using the Scherrer equation, the average crystallite size was calculated as 35.69 nm. S4-GoNPs displayed significant antidiabetic properties, with 40.67% of α-amylase and 91.33% of α-glucosidase inhibition activity. It also exhibited promising antioxidant potential in terms of the DPPH (91.56%) ABTS (76.59%) scavenging. It displayed 31.04% tyrosinase inhibition at 0.1 mg/mL. Moreover, it also demonstrated encouraging antibacterial effects with zones of inhibition ranging from 11.02 - 14.12 mm as compared to 10.55-16.24 mm by the reference streptomycin (at 0.01 mg/disc). In addition, S4-GoNPs also showed potential for the photocatalytic degradation of the industrial dye, methylene blue.

Conclusion

In conclusion, these results suggest the promising applicability of green-synthesized S4-GoNPs in various sectors, including the biomedical, cosmetic, food, and environmental waste management industries.

Self-assembly of hard anions around cationic gold nanorods: potential structures for SERS

The placement of polyoxometalates next to the surface of noble metallic nanoparticles has been found to enhance the surface-enhanced Raman scattering (SERS) effect. The enhancement is believed to stem from either charge (electrostatic attraction) or chemical effects. Anisotropic gold nanorods are recognized as useful nanostructures for SERS, mainly due to the high electric field enhancement at their ends. The presented work examines the use of a polyoxometalate encapsulated gold nanorod for SERS, to assess whether the two enhancement pathways would be synergetic. For this, a gold nanorod-polyoxometalate composite was synthesized by coating cetyltrimethylammonium bromide-stabilized gold nanorods with a silicotungstic Keggin anion through electrostatic attraction. The structure was characterized, confirming that the nanorods have been fully encapsulated by the polyoxometalate. The SERS performance of the composite was assessed in solution using crystal violet as a SERS indicator, finding an analytical enhancement factor of 1.8 × 104 in colloidal solution. The enhancement mechanism was examined first by comparison to gold nanorods stabilized by a cetyltriethylammonium bromide bilayer, cationic thiol bound polyoxometalate, and polyelectrolyte coating. Next, composites made using polyoxometalates of different atomic composition and charge were examined. It was concluded that the polyoxometalate charge had a noticeable effect on the enhancement while the atomic composition did not. Furthermore, high enhancement is observed mainly in cases where the nanorod monolayer allows the sequestration of the dye molecule into the nanoparticle's ligand layer. The proposed mechanism therefore involves the negative charge of the polyoxometalate attracting the positively charged dye, and facilitating the sequestration of the dye within the ligand bilayer, closer to the nanorod's surface.

Customizable ligand exchange on the surface of gold nanotriangles enables their application in LSPR-based sensing

Nanomaterials made of noble metals have been actively utilized in sensorics and bioanalytics. Nanoparticles of anisotropic shapes are promising for increasing sensitivity due to the generated hotspots of electron density. Such structures can be effectively manufactured by a relatively accessible colloidal synthesis. However, the shape control requires the attachment of a surfactant on specific crystal facets during their growth. Commonly used cetrimonium halides form a closely packed bilayer, lowering the surface accessibility for subsequent (bio)functionalization steps. While there are numerous studies on functionalizing gold nanospheres, novel materials, such as nanotriangles (AuNTs), often require thorough studies to adapt the existing procedures. This is mainly caused by the incomplete characterization of initial nanoparticle colloids in empirically developed protocols. Herein, we report a rational approach utilizing the surface area of AuNTs as a function of both their dimensions and concentration, determined with an express UV-VIS analysis. We demonstrate its efficiency for the exchange of cetyltrimethylammonium chloride (CTAC) with polystyrene sulfonate (PSS) and with biocompatible citrate using direct and indirect methods, respectively. Fourier-transform infrared spectroscopy unequivocally proves the ligand exchange. Such functionalization allows evaluating the bulk refractive index sensitivity of AuNTs as a measure of their potential in LSPR-based sensing.

Facile Synthesis and Characterization of Uniform Au Nanospheres Capped by Citrate for Biomedical Applications

We report a simple and versatile method for effectively replacing the toxic ligands, such as cetyltrimethylammonium bromide (CTAB) and cetyltrimethylammonium chloride (CTAC), on the surface of Au nanospheres with different sizes by citrate. The method involves the deposition of an ultrathin shell of fresh Au in the presence of sodium citrate at an adequate concentration. After the ligand exchange process, multiple techniques are used to confirm that the surface of the resultant Au nanospheres is covered by citrate while there is no sign of aggregation. We also demonstrate the mitigation of cell toxicity after exchanging the surface-bound CTAB/CTAC with citrate, opening the door to a range of biomedical applications.

Biohybrid materials comprising an artificial peroxidase and differently shaped gold nanoparticles

The immobilization of biocatalysts on inorganic supports allows the development of bio-nanohybrid materials with defined functional properties. Gold nanomaterials (AuNMs) are the main players in this field, due to their fascinating shape-dependent properties that account for their versatility. Even though incredible progress has been made in the preparation of AuNMs, few studies have been carried out to analyze the impact of particle morphology on the behavior of immobilized biocatalysts. Herein, the artificial peroxidase Fe(iii)-Mimochrome VI*a (FeMC6*a) was conjugated to two different anisotropic gold nanomaterials, nanorods (AuNRs) and triangular nanoprisms (AuNTs), to investigate how the properties of the nanosupport can affect the functional behavior of FeMC6*a. The conjugation of FeMC6*a to AuNMs was performed by a click-chemistry approach, using FeMC6*a modified with pegylated aza-dibenzocyclooctyne (FeMC6*a-PEG4@DBCO), which was allowed to react with azide-functionalized AuNRs and AuNTs, synthesized from citrate-capped AuNMs. To this end, a literature protocol for depleting CTAB from AuNRs was herein reported for the first time to prepare citrate-AuNTs. The overall results suggest that the nanomaterial shape influences the nanoconjugate functional properties. Besides giving new insights into the effect of the surfaces on the artificial peroxidase properties, these results open up the way for creating novel nanostructures with potential applications in the field of sensing devices.

Embedding plasmonic nanoparticles in soft crystals: an approach exploiting CTAB-I structures

Embedding nanoparticles with different functionalities into soft substrates is a convenient tool to realize technologically significant multifunctional materials. This study focuses on incorporating bimetallic plasmonic nanoparticles into soft crystals made of cetyltrimethylammonium bromide-iodide. We observed the emergence of a novel symmetry-lowered cetrimonium crystal polymorph that enables the realization of strong interparticle plasmonic coupling in these composite materials. The observed crystal polymorph exhibits a triclinic structure with significantly reduced unit cell volume compared to standard CTAB. Solid-state nuclear magnetic resonance studies revealed an enhanced cetrimonium chain rigidity and a commensurate decrease in the mobility of the methyl groups. This is attributed to iodide incorporation. To study the influence of these interactions on solution phase dynamical properties, we employed light scattering measurements using gold nanospheres as markers, where we observed aggregation of these particles. We then develop a two step synthetic scheme that successfully enables high levels (533 particles per μm2) of incorporation of bimetallic plasmonic particles into the emergent crystal polymorph.

NIR-Active Gold Dogbone Nanorattles Impregnated in Cationic Dextrin Nanoparticles for Cancer Nanotheranostics

Theranostic systems, which integrate therapy and diagnosis into a single platform, have gained significant attention as a promising approach for noninvasive cancer treatment. The field of image-guided therapy has revolutionized real-time tumor detection, and within this domain, plasmonic nanostructures have garnered significant attention. These structures possess unique localized surface plasmon resonance (LSPR), allowing for enhanced absorption in the near-infrared (NIR) range. By leveraging the heat generated from plasmonic nanoparticles upon NIR irradiation, target cancer cells can be effectively eradicated. This study introduces a plasmonic gold dogbone-nanorattle (AuDB NRT) structure that exhibits broad absorption in the NIR region and demonstrates a photothermal conversion efficiency of 35.29%. When exposed to an NIR laser, the AuDB NRTs generate heat, achieving a maximum temperature rise of 38 °C at a concentration of 200 μg/mL and a laser power density of 3 W/cm2. Additionally, the AuDB NRTs possess intrinsic electromagnetic hotspots that amplify the signal of a Raman reporter molecule, making them an excellent probe for surface-enhanced Raman scattering-based bioimaging of cancer cells. To improve the biocompatibility of the nanorattles, the AuDB NRTs were conjugated with mPEG-thiol and successfully encapsulated into cationic dextrin nanoparticles (CD NPs). Biocompatibility tests were performed on HEK 293 A and MCF-7 cell lines, revealing high cell viability when exposed to AuDB NRT-CD NPs. Remarkably, even at a low laser power density of 1 W/cm2, the application of the NIR laser resulted in a remarkable 80% cell death in cells treated with a nanocomposite concentration of 100 μg/mL. Further investigation elucidated that the cell death induced by photothermal heat followed an apoptotic mechanism. Overall, our findings highlight the significant potential of the prepared nanocomposite for cancer theranostics, combining effective photothermal therapy along with the ability to image cancer cells.

Fabrication strategies for chiral self-assembly surface

Chiral self-assembly is the spontaneous organization of individual building blocks from chiral (bio)molecules to macroscopic objects into ordered superstructures. Chiral self-assembly is ubiquitous in nature, such as DNA and proteins, which formed the foundation of biological structures. In addition to chiral (bio) molecules, chiral ordered superstructures constructed by self-assembly have also attracted much attention. Chiral self-assembly usually refers to the process of forming chiral aggregates in an ordered arrangement under various non-covalent bonding such as H-bond, π-π interactions, van der Waals forces (dipole-dipole, electrostatic effects, etc.), and hydrophobic interactions. Chiral assembly involves the spontaneous process, which followed the minimum energy rule. It is essentially an intermolecular interaction force. Self-assembled chiral materials based on chiral recognition in electrochemistry, chiral catalysis, optical sensing, chiral separation, etc. have a broad application potential with the research development of chiral materials in recent years.

Multifunctional DNA scaffold mediated gap plasmon resonance: Application to sensitive PD-L1 sensor

The introduction of noble metal nanoparticles with good LSPR characteristics can greatly improve the sensitivity of SPR through resonance coupling effect. The plasma resonance response and optical properties of film coupling nanoparticle systems largely depends on the ingenious design of gap structures. Nucleic acid nanostructures have good stability, flexibility, and high biocompatibility, making them ideal materials for gap construction. 2D MOF (Cu-Tcpp) has a large conjugated surface similar to graphene, which can provide a stable substrate for the directional fixation of nucleic acid nanostructures. However, research on gap coupling plasmon based on nucleic acid nanostructures and 2D MOF is still rarely reported. By integrating the advantages of Cu-Tcpp assembled film and DNA tetrahedron immobilization, a nano gap with porous scaffold structure between the gold film and gold nanorod was build. The rigidity of DNA tetrahedron can precisely control the gap size, and its unique programmability allows us to give the coupling structure greater flexibility through the design of nucleic acid chain. The experimental results and FDTD simulation show that the film coupling nanoparticle systems constructed with DNA tetrahedrons greatly enhance the electric field strength near the chip surface and effectively improve the sensitivity of SPR. This research shows the huge potential of nucleic acid nanomaterials in the construction of SPR chip surface microstructures.

An Activated Structure Transformable Ratiometric Photoacoustic Nanoprobe for Real-Time Dynamic Monitoring of H2S In Vivo

H2S has emerged as a promising biomarker for many diseases such as colon cancer and metformin-induced hepatotoxicity. Real-time monitoring of H2S levels in vivo is significant for early accurate diagnosis of these diseases. Herein, a new accurate and reliable nanoprobe (Au NRs@Ag) was designed for real-time dynamic ratiometric photoacoustic (PA) imaging of H2S in vivo based on the endogenous H2S-triggered local surface plasmon resonance (LSPR) red-shift. The Au NRs@Ag nanoprobe can be readily converted into Au NRs@Ag2S via the endogenous H2S-activated in situ sulfurative reaction, subsequently leading to a significant red-shift of the LSPR wavelength from 808 to 980 nm and enabling accurate ratiometric PA (PA980/PA808) imaging of H2S. Moreover, dynamic ratiometric PA imaging of metformin-induced hepatotoxicity was also successfully achieved by the designed PA imaging strategy. These findings provide the possibility of designing a new ratiometric PA imaging strategy for dynamic in situ monitoring of H2S-related diseases.

Impact of Surface Charge-Tailored Gold Nanorods for Selective Targeting of Mitochondria in Breast Cancer Cells Using Photodynamic Therapy

Herein, the impact of surface charge tailored of gold nanorods (GNRs) on breast cancer cells (MCF-7 and MDA-MB-231) upon conjugation with triphenylphosphonium (TPP) for improved photodynamic therapy (PDT) targeting mitochondria was studied. The salient features of the study are as follows: (i) positive (CTAB@GNRs) and negative (PSS-CTAB@GNRs) surface-charged gold nanorods were developed and characterized; (ii) the mitochondrial targeting efficiency of gold nanorods was improved by conjugating TPP molecules; (iii) the conjugated nanoprobes (TPP-CTAB@GNRs and TPP-PSS-CTAB@GNRs) were evaluated for PDT in the presence of photosensitizer (PS), 5-aminolevulinic acid (5-ALA) in breast cancer cells; (iv) both nanoprobes (TPP-CTAB@GNRs and TPP-PSS-CTAB@GNRs) induce apoptosis, damage DNA, generate reactive oxygen species, and decrease mitochondrial membrane potential upon 5-ALA-based PDT; and (v) 5-ALA-PDT of two nanoprobes (TPP-CTAB@GNRs and TPP-PSS-CTAB@GNRs) impact cell signaling (PI3K/AKT) pathway by upregulating proapoptotic genes and proteins. Based on the results, we confirm that the positively charged (rapid) nanoprobes are more advantageous than their negatively (slow) charged nanoprobes. However, depending on the kind and degree of cancer, both nanoprobes can serve as efficient agents for delivering anticancer therapy.

Chemical and Physical Properties of Photonic Noble-Metal Nanomaterials

Colloidal noble metal nanoparticles (NPs) are composed of metal cores and organic or inorganic ligand shells. These NPs support size- and shape-dependent plasmonic resonances. They can be assembled from dispersions into artificial metamolecules which have collective plasmonic resonances originating from coupled bright and dark optical electric and magnetic modes that form depending on the size and shape of the constituent NPs and their number, arrangement, and interparticle distance. NPs can also be assembled into extended 2D and 3D metamaterials that are glassy thin films or ordered thin films or crystals, also known as superlattices and supercrystals. The metamaterials have tunable optical properties that depend on the size, shape, and composition of the NPs, and on the number of NP layers and their interparticle distance. Interestingly, strong light-matter interactions in superlattices form plasmon polaritons. Tunable interparticle distances allow designer materials with dielectric functions tailorable from that characteristic of an insulator to that of a metal, and serve as strong optical absorbers or scatterers, respectively. In combination with lithography techniques, these extended assemblies can be patterned to create subwavelength NP superstructures and form large-area 2D and 3D metamaterials that manipulate the amplitude, phase, and polarization of transmitted or reflected light.

Atomically precise nanoclusters predominantly seed gold nanoparticle syntheses

Seed-mediated synthesis strategies, in which small gold nanoparticle precursors are added to a growth solution to initiate heterogeneous nucleation, are among the most prevalent, simple, and productive methodologies for generating well-defined colloidal anisotropic nanostructures. However, the size, structure, and chemical properties of the seeds remain poorly understood, which partially explains the lack of mechanistic understanding of many particle growth reactions. Here, we identify the majority component in the seed solution as an atomically precise gold nanocluster, consisting of a 32-atom Au core with 8 halide ligands and 12 neutral ligands constituting a bound ion pair between a halide and the cationic surfactant: Au₃₂X₈[AQA⁺•X^-]₁₂ (X = Cl, Br; AQA = alkyl quaternary ammonium). Ligand exchange is dynamic and versatile, occurring on the order of minutes and allowing for the formation of 48 distinct Au₃₂ clusters with AQAX (alkyl quaternary ammonium halide) ligands. Anisotropic nanoparticle syntheses seeded with solutions enriched in Au₃₂X₈[AQA⁺•X^-]₁₂ show narrower size distributions and fewer impurity particle shapes, indicating the importance of this cluster as a precursor to the growth of well-defined nanostructures.

Photothermal therapeutic ability of copper open-shell nanostructures that are effective in the second biological transparency window based on symmetry breaking-induced plasmonic properties

In this study, a photothermal therapy agent that works efficiently in the second biological transparency window was developed based on the localized surface plasmon (LSP) resonance of symmetry-broken open-shell nanostructures of low-cost Cu (CuOSNs). The strong LSP resonance and superior photothermal conversion ability in the second biological transparency window were achieved by generating the dipolar bonding mode due to the plasmon hybridization between the nanoshell dipole and the nanohole dipole at the opening edge in CuOSNs derived from the symmetry breaking of a Cu nanoshell. Oxidative dissolution of CuOSNs in water was significantly suppressed by successive coating with the self-assembled monolayer of 16-mercaptohexadecanoic acid and a thin silica layer. Furthermore, the stability in phosphate buffered saline, which models the biological environment, was attained by further coating the nanoparticles with polyethylene glycol. It was demonstrated from in vitro cell tests using HeLa cells that the cytotoxicity of CuOSNs was effectively suppressed by the surface protection. The viability of HeLa cells incubated with CuOSNs was decreased under the irradiation of low intensity 1060 nm laser with increasing number of CuOSNs. These results demonstrate that low-cost symmetry-broken Cu-based nanostructures can act as an excellent photothermal therapy agent in the second biological transparency window.

Gold Nanorods with Mesoporous Silica Shell: A Promising Platform for Cisplatin Delivery

The versatile combination of metal nanoparticles with chemotherapy agents makes designing multifunctional drug delivery systems attractive. In this work, we reported cisplatin's encapsulation and release profile using a mesoporous silica-coated gold nanorods system. Gold nanorods were synthesized by an acidic seed-mediated method in the presence of cetyltrimethylammonium bromide surfactant, and the silica-coated state was obtained by modified Stöber method. The silica shell was modified first with 3-aminopropyltriethoxysilane and then with succinic anhydride to obtain carboxylates groups to improve cisplatin encapsulation. Gold nanorods with an aspect ratio of 3.2 and silica shell thickness of 14.74 nm were obtained, and infrared spectroscopy and ζ potential studies corroborated surface modification with carboxylates groups. On the other hand, cisplatin was encapsulated under optimal conditions with an efficiency of ~58%, and it was released in a controlled manner over 96 h. Furthermore, acidic pH promoted a faster release of 72% cisplatin encapsulated compared to 51% in neutral pH.

Quantification, Exchange, and Removal of Surface Ligands on Noble-Metal Nanocrystals

ConspectusSurface ligands are vital to the colloidal synthesis of noble-metal nanocrystals with well-controlled sizes and shapes for various applications. The surface ligands not only dictate the formation of nanocrystals with diverse shapes but also serve as a colloidal stabilizer to prevent the suspended nanocrystals from aggregation during their synthesis or storage. By leveraging the facet selectivity of some surface ligands, one can further control the sites for growth or galvanic replacement to transform presynthesized nanocrystals into complex structures that are otherwise difficult to fabricate using conventional methods. Furthermore, the presence of surface ligands on nanocrystals also facilitates their applications in areas such as sensing, imaging, nanomedicine, and self-assembly. Despite their popular use in enhancing the properties of nanocrystals and thus optimizing their performance in a wide variety of applications, it remains a major challenge to quantitatively determine the coverage density of ligand molecules, not to mention the difficulty of substituting or removing them without compromising the surface structure and aggregation state of the nanocrystals.In this Account, we recapitulate our efforts in developing methods capable of qualitatively or quantitatively measuring, exchanging, and removing the surface ligands adsorbed on noble-metal nanocrystals. We begin with an introduction to the typical interactions between ligand molecules and surface atoms, followed by a discussion of the Langmuir model that can be used to describe the adsorption of surface ligands. It is also emphasized that the adsorption process may become very complex in the case of a polymeric ligand due to the variations in binding configuration and chain conformation. We then highlight the capabilities of various spectroscopy methods to analyze the adsorbed ligands qualitatively or quantitatively. Specifically, surface-enhanced Raman scattering, Fourier transform infrared, and X-ray photoelectron spectroscopy are three examples of qualitative methods that can be used to confirm the absence or presence of a surface ligand. On the other hand, ultraviolet-visible spectroscopy and inductively coupled plasma mass spectrometry can be used for quantitative measurements. Additionally, the coverage density of a ligand can be derived by analyzing the morphological changes during nanocrystal growth. We then discuss how the ligands present on the surface of metal nanocrystals can be exchanged directly or indirectly to meet the requirements of different applications. The former can be done using a ligand with stronger binding, whereas the latter is achieved by introducing a sacrificial shell to the surface of the nanocrystals. Furthermore, we highlight three additional strategies besides simple washing to remove the surface ligands, including calcination, heating in a solution, and UV-ozone treatment. Finally, we showcase three applications of metal nanocrystals in nanomedicine, tumor targeting, and self-assembly by taking advantage of the diversity of surface ligands bearing different functional groups. We also offer perspectives on the challenges and opportunities in realizing the full potential of surface ligands.

Gold nanoparticle shape dependence of colloidal stability domains

Controlling the spatial arrangement of plasmonic nanoparticles is of particular interest to utilize inter-particle plasmonic coupling, which allows changing their optical properties. For bottom-up approaches, colloidal nanoparticles are interesting building blocks to generate more complex structures via controlled self-assembly using the destabilization of colloidal particles. For plasmonic noble metal nanoparticles, cationic surfactants, such as CTAB, are widely used in synthesis, both as shaping and stabilizing agents. In such a context, understanding and predicting the colloidal stability of a system solely composed of AuNPs and CTAB is fundamentally crucial. Here, we tried to rationalize the particle behavior by reporting the stability diagrams of colloidal gold nanostructures taking into account parameters such as the size, shape, and CTAB/AuNP concentration. We found that the overall stability was dependent on the shape of the nanoparticles, with the presence of sharp tips being the source of instability. For all morphologies evaluated here, a metastable area was systematically observed, in which the system aggregated in a controlled way while maintaining the colloidal stability. Combining different strategies with the help of transmission electron microscopy, the behavior of the system in the different zones of the diagrams was addressed. Finally, by controlling the experimental conditions with the previously obtained diagrams, we were able to obtain linear structures with a rather good control over the number of particles participating in the assembly while maintaining good colloidal stability.

Mechanistic Insights into the Biological Effects of Engineered Nanomaterials: A Focus on Gold Nanoparticles

Nanotechnology has great potential to significantly advance the biomedical field for the benefit of human health. However, the limited understanding of nano-bio interactions leading to unknowns about the potential adverse health effects of engineered nanomaterials and to the poor efficacy of nanomedicines has hindered their use and commercialization. This is well evidenced considering gold nanoparticles, one of the most promising nanomaterials for biomedical applications. Thus, a fundamental understanding of nano-bio interactions is of interest to nanotoxicology and nanomedicine, enabling the development of safe-by-design nanomaterials and improving the efficacy of nanomedicines. In this review, we introduce the advanced approaches currently applied in nano-bio interaction studies-omics and systems toxicology-to provide insights into the biological effects of nanomaterials at the molecular level. We highlight the use of omics and systems toxicology studies focusing on the assessment of the mechanisms underlying the in vitro biological responses to gold nanoparticles. First, the great potential of gold-based nanoplatforms to improve healthcare along with the main challenges for their clinical translation are presented. We then discuss the current limitations in the translation of omics data to support risk assessment of engineered nanomaterials.

Detection of Glucose Based on Noble Metal Nanozymes: Mechanism, Activity Regulation, and Enantioselective Recognition

Glucose monitoring is essential to evaluate the degree of glucose metabolism disorders. The enzymatic determination has been the most widely used method in glucose detection because of its high efficiency, accuracy, and sensitivity. Noble metal nanomaterials (NMs, i.e., Au, Ag, Pt, and Pd), inheriting their excellent electronic, optical, and enzyme-like properties, are classified as noble metal nanozymes (NMNZs). As the NMNZs are often involved in two series of reactions, the oxidation of glucose and the chromogenic reaction of peroxide, here the chemical mechanism by employing NMNZs with glucose oxidase (GOx) and peroxidase (POD) mimicking activities is briefly summarized first. Subsequently, the regulation strategies of the GOx-like, POD-like and tandem enzyme-like activities of NMNZs are presented in detail, including the materials, size, morphology, composition, and the reaction condition of the representative NMs. In addition, in order to further mimic the enantioselectivity of enzyme, the design of NMNZs with enantioselective recognition of d-glucose and l-glucose by using different chiral compounds (DNA, amino acids, and cyclodextrins) and molecular imprinting is further described in this review. Finally, the feasible solutions to the existing challenges and a vision for future development possibilities are discussed.

An Overview on Gold Nanorods as Versatile Nanoparticles in Cancer Therapy

Gold nanorods (GNRs/AuNRs) are a group of gold nanoparticles which their simple surface chemistry allows for various surface modifications, providing the possibility of using them in the fabrication of biocompatible and functional nano-agents for cancer therapy. AuNRs, moreover, exhibit a maximum absorption of longitudinal localized surface plasmon resonance (LSPR) in the near-infrared (NIR) region which overlaps with NIR bio-tissue 'window' suggesting that they are proper tools for thermal ablation of cancer cells. AuNRs can be used for induction of mono or combination therapies by administering various therapeutic approaches such as photothermal therapy (PTT), photodynamic therapy (PDT), chemotherapy (CT), radiotherapy (RT), and gene therapy (GT). In this review, anticancer therapeutic capacities of AuNRs along with different surface modifications are summarized comprehensively. The roles of AuNRs in fabrication of various nano-constructs are also discussed.

Continuous Electroformation of Gold Nanoparticles in Nanoliter Droplet Reactors

Gold nanoparticles (AuNPs) are employed in numerous applications, including optics, biosensing and catalysis. Here, we demonstrate the stabilizer-free electrochemical synthesis of AuNPs inside nanoliter-sized reactors. Droplets encapsulating a gold precursor are formed on a microfluidic device and exposed to an electrical current by guiding them through a pair of electrodes. We exploit the naturally occurring recirculation flows inside confined droplets (moving in rectangular microchannels) to prevent the aggregation of nanoparticles after nucleation. Therefore, AuNPs with sizes in the range of 30 to 100 nm were produced without the need of additional capping agents. The average particle size is defined by the precursor concentration and droplet velocity, while the charge dose given by the electric field strength has a minor effect. This method opens the way to fine-tune the electrochemical production of gold nanoparticles, and we believe it is a versatile method for the formation of other metal nanoparticles.

Chiral Au Nanorods: Synthesis, Chirality Origin, and Applications

Chiral Au nanorods (c-Au NRs) with diverse architectures constitute an interesting nanospecies in the field of chiral nanophotonics. The numerous possible plasmonic behaviors of Au NRs can be coupled with chirality to initiate, tune, and amplify their chiroptical response. Interdisciplinary technologies have boosted the development of fabrication and applications of c-Au NRs. Herein, we have focused on the role of chirality in c-Au NRs which helps to manipulate the light-matter interaction in nontraditional ways. A broad overview on the chirality origin, chirality transfer, chiroptical activities, artificially synthetic methodologies, and circularly polarized applications of c-Au NRs will be summarized and discussed. A deeper understanding of light-matter interaction in c-Au NRs will help to manipulate the chirality at the nanoscale, reveal the natural evolution process taking place, and set up a series of circularly polarized applications.

Site-selective modification of metallic nanoparticles

Surface patterning of inorganic nanoparticles through site-selective functionalization with mixed-ligand shells or additional inorganic material is an intriguing approach to developing tailored nanomaterials with potentially novel and/or multifunctional properties. The unique physicochemical properties of such nanoparticles are likely to impact their behavior and functionality in biological environments, catalytic systems, and electronics applications, making it vital to understand how we can achieve and characterize such regioselective surface functionalization. This Feature Article will review methods by which chemists have selectively modified the surface of colloidal nanoparticles to obtain both two-sided Janus particles and nanoparticles with patchy or stripey mixed-ligand shells, as well as to achieve directed growth of mesoporous oxide materials and metals onto existing nanoparticle templates in a spatially and compositionally controlled manner. The advantages and drawbacks of various techniques used to characterize the regiospecificity of anisotropic surface coatings are discussed, as well as areas for improvement, and future directions for this field.

Alkynyl ligands-induced growth of ultrathin nanowires arrays

Ligands are almost essential in the synthesis of nanostructures. In this work, we introduce the alkynyl ligands into the synthesis of ultrathin gold (Au) nanowires arrays. The strong binding affinity of the alkynyl ligands enables one-dimensional (1D) growth via the active surface growth mechanism. The scope of the ligand generality was systematically investigated, and the alkynyl ligand-induced nanowire growth processes were compared and contrasted with those involving thiolated ligands. While strong ligands are usually difficult to dissociate from the nanostructure surface and therefore problematic for post-synthetic processing, the alkynyl ligands are readily dissociable, making the alkynyl ligand-stabilized Au nanowires potentially more modifiable and applicable. As a demonstration, direct palladium (Pd) deposition on the Au nanowires was successfully carried out without any ligand exchange process.

Modulation Technique of Localized Surface Plasmon Resonance of Palladium Nanospheres by Coating with Titanium Dioxide Shell for Application to Photothermal Therapy Agent

Although plasmonic palladium (Pd) nanospheres are thermodynamically stable and have high photothermal conversion due to the free and bound electron coupling associated with the intrinsic high interband transition, they have not attracted attention as a photothermal conversion material for next-generation photothermal cancer therapy. This is because the Pd nanospheres generate the localized surface plasmon resonance (LSPR) intrinsically in the ultraviolet region, which is far away from the biological transparent window (750-900 nm). In this study, we controlled the LSP wavelength of Pd nanospheres by coating with high refractive index TiO₂ shells taking advantage of the Pd LSPR which is highly sensitive to changes in the local refractive index around the nanospheres. Our calculations indicated that the absorption cross section at 808 nm (corresponding to the wavelength used for photothermal treatment) was increased by 4.5 times by redshifting the LSPR and increasing the extinction intensity associated with the coating with TiO₂ shell. Experiments confirmed the theoretical prediction in that the LSPR of the synthesized Pd nanospheres with a diameter of 81 nm was significantly redshifted by coating with amorphous TiO₂ shell, resulting in significant large extinction intensity at 808 nm. The photothermal conversion efficiency was estimated to be 50%. In vitro cell tests, HeLa cells incubated with 100-300 μg/mL TiO₂-coated Pd nanospheres were efficiently killed by irradiating 808 nm laser (1.8 W) even though the nanospheres with the same concentrations showed little cytotoxicity. These results indicate that the Pd nanospheres coated with high refractive index shells can be promising as a photothermal therapy agent.

Investigation of Plasmonic-Enhanced Solar Photothermal Effect of Au NR@PVDF Micro-/Nanofilms

Gold nanospheres (Au NSs) and gold nanorods (Au NRs) are traditional noble metal plasmonic nanomaterials. Particularly, Au NRs with tunable longitudinal plasmon resonance from the visible to the near-infrared (NIR) range were suitable for highly efficient photothermal applications due to the extended light-receiving range. In this work, we synthesized Au NRs and Au NSs of similar volumes and subsequently developed them into Au NR/poly(vinylidene fluoride) (PVDF) and Au NS/PVDF nanofilms, both of which exhibited excellent solar photothermal performance evaluated by solar photothermal experiments. We found that the Au NR/PVDF nanofilm showed a higher solar photothermal performance than the Au NS/PVDF nanofilm. Through detailed analysis, such as morphological characterization, optical measurement, and finite element method (FEM) modeling, we found that the plasmonic coupling effects inside the aggregated Au NR nanoclusters contributed to the spectral blue shifts and intensified the photothermal performance. As compared to Au NS/PVDF nanofilms, the Au NR/PVDF nanofilm exhibited a higher efficient light-to-heat conversion rate because of the extended light-receiving range and high absorbance, as a result of the strong plasmonic interactions inside nanoclusters, which was further validated by monochromatic laser photothermal experiments and FEM simulations. Our work proved that the Au NRs have huge potential for plasmonic solar photothermal applications and are envisioned for novel plasmonic applications.

Current Status and Challenges of Analytical Methods for Evaluation of Size and Surface Modification of Nanoparticle-Based Drug Formulations

The present review discusses the current status and difficulties of the analytical methods used to evaluate size and surface modifications of nanoparticle-based pharmaceutical products (NPs) such as liposomal drugs and new SARS-CoV-2 vaccines. We identified the challenges in the development of methods for (1) measurement of a wide range of solid-state NPs, (2) evaluation of the sizes of polydisperse NPs, and (3) measurement of non-spherical NPs. Although a few methods have been established to analyze surface modifications of NPs, the feasibility of their application to NPs is unknown. The present review also examined the trends in standardization required to validate the size and surface measurements of NPs. It was determined that there is a lack of available reference materials and it is difficult to select appropriate ones for modified NP surface characterization. Research and development are in progress on innovative surface-modified NP-based cancer and gene therapies targeting cells, tissues, and organs. Next-generation nanomedicine should compile studies on the practice and standardization of the measurement methods for NPs to design surface modifications and ensure the quality of NPs.

Evidence for a Local Field Effect in Surface Plasmon-Enhanced Sum Frequency Generation Vibrational Spectra

Surface plasmon-enhanced vibrational spectroscopy has been demonstrated to be an important highly sensitive diagnostic technique, but its enhanced mechanism is yet to be explored. In this study, we couple femtosecond sum frequency generation vibrational spectroscopy (SFG-VS) with surface plasmon generated by the excitation of localized gold nanorods/nanoparticles and investigate the plasmonically enhanced factors (EFs) of SFG signals from poly(methyl methacrylate) films. Through monitoring the SFG intensity of carbonyl and ester methyl groups, we have established a correlation between EFs and the coupling of localized surface plasmon resonance with SFG and visible beams. It is found that the total enhanced factor is approximately proportional to the square of an enhanced factor of the SFG electromagnetic field and the fourth power of the enhanced factor of the visible electromagnetic field. The local field effect is roughly expressed to be the square of an enhanced factor of the visible electromagnetic field. This finding will help to guide the experimental design of plasmon-enhanced SFG to drastically improve the detection sensitivity and thus provide greater insight into the ultrafast dynamics near plasmonic surfaces.

Enhancing Efficiency of Nonfullerene Organic Solar Cells via Using Polyelectrolyte-Coated Plasmonic Gold Nanorods as Rear Interfacial Modifiers

Sufficient sunlight absorption and exciton generation are critical for developing efficient nonfullerene organic solar cells (OSCs). In this work, polyelectrolyte polystyrenesulfonate (PSS)-coated plasmonic gold nanorods (GNRs@PSS) were incorporated, for the first time, into the inverted nonfullerene OSCs as rear interfacial modifiers to improve sunlight absorption and charge generation via the near-field plasmonic and backscattering effects. The plasmonic GNRs effectively improved the sunlight absorption and enhanced the charge generation. Meanwhile, the negatively charged PSS shell ensured the uniform dispersion of the GNRs on the surface of the photoactive layer, optimized the interfacial contact, and further promoted the hole transport to the electrode. These concerted synergistic effects augmented the efficiency (10.11%) by nearly 20% relative to the control device (8.47%). Remarkably, the ultrathin (∼2.2 nm) organic layer on the surface of GNRs was closely examined by acquiring the carbon contrast image through energy-filtered transmission electron microscopy (EF-TEM), which clearly confirmed the coating uniformity from the side to end-cap of GNRs. The surface plasmon resonance (SPR) effect of the GNRs@PSS on the surface of the photoactive layer was unprecedentedly mapped by photoinduced force microscopy (PiFM) under the illumination of a tunable wavelength supercontinuum laser mimicking sunlight. Furthermore, investigations into the effect of size, surface coverage, and incorporation location of GNRs@PSS on the performance of OSCs revealed that the appropriate design and incorporation of the plasmonic nanostructures are crucial, otherwise the performance can be decreased, as evidenced in the case of front interface integration.

Anisotropic silica coating on gold nanorods boosts their potential as SERS sensors

Gold nanorods are well-known surface-enhanced Raman scattering substrates. Under longitudinal plasmonic excitation, the ends of the nanorods experience larger local electric fields compared to the sides of the rods, suggesting that Raman-active molecules would be best detected if the molecules could preferentially bind to the ends of the nanorods. Coating the tips of gold nanorods with anionic mesoporous silica caps enabled surface-enhanced Raman scattering (SERS) detection of the cationic dye methylene blue at lower concentrations than observed for the corresponding silica coating of the entire rod. By analyzing the intensity ratio of two Raman active modes of methylene blue and the surface plasmon resonance peak shift of the gold nanorod composites, it can be inferred that at a low concentration of methylene blue, molecules adsorb to the tips of the tip coated silica gold nanorods. Functionalization of the anionic silica endcaps with cationic groups eliminates the SERS enhancement for the cationic methylene blue, demonstrating the electrostatic nature of the adsorption process in this case. These results show that anisotropic silica coatings can concentrate analytes at the tips of gold nanorods for improvements in chemical sensing and diagnostics.

NVCL-Based Galacto-Functionalized and Thermosensitive Nanogels with GNRDs for Chemo/Photothermal-Therapy

Dual-function nanogels (particle size from 98 to 224 nm) synthesized via surfactant-free emulsion polymerization (SFEP) were tested as smart carriers toward synergistic chemo- and photothermal therapy. Cisplatin (CDDP) or doxorubicin (DOX) and gold nanorods (GNRDs) were loaded into galacto-functionalized PNVCL-based nanogels, where the encapsulation efficiency for CDDP and DOX was around 64 and 52%, respectively. PNVCL-based nanogels were proven to be an efficient delivery vehicle under conditions that mimic the tumor site in vitro. The release of CDDP or DOX was slower at pH 7.4 and 37 °C than at tumor conditions of pH 6 and 40 °C. On the other hand, in the systems with GNRDs at pH 7.4 and 37 °C, the sample was irradiated with a 785 nm laser for 10 min every hour, obtaining that the release profiles were even higher than in the conditions that simulated a cancer tissue (without irradiation). Thus, the present study demonstrates the synergistic effect of chemo- and photothermal therapy as a promising dual function in the potential future use of PNVCL nanogels loaded with GNRDs and CDDP/DOX to achieve an enhanced chemo/phototherapy in vivo.

Coating gold nanorods with silica prevents the generation of reactive oxygen species under laser light irradiation for safe biomedical applications

Gold nanoparticles can produce reactive oxygen species (ROS) under the action of ultrashort pulsed light. While beneficial for photodynamic therapy, this phenomenon is prohibitive for other biomedical applications such as imaging, photo-thermal drug release, or targeted gene delivery. Here, ROS are produced in water by irradiating gold nanorods and silica-coated gold nanorods with near-infrared femtosecond laser pulses and are detected using two fluorescent probes. Our results demonstrate that a dense silica shell around gold nanorods inhibits the formation of singlet oxygen (¹O₂) and hydroxyl radical (˙OH) efficiently. The silica coating prevents the Dexter energy transfer between the nanoparticles and ³O₂, stopping thus the generation of ¹O₂. In addition, numerical simulations accounting for the use of ultrashort laser pulses show that the plasmonic field enhancement at the nanoparticle vicinity is lessened once adding the silica layer. With the multiphotonic ejection of electrons being also blocked, all the possible pathways for ROS production are hindered by adding the silica shell around gold nanorods, making them safer for a range of biomedical developments.

Coating Gold Nanorods with Self-Assembling Peptide Amphiphiles Promotes Stability and Facilitates in vivo Two-Photon Imaging

Gold nanorods (GNRs) are versatile asymmetric nanoparticles with unique optical properties. These properties makes GNRs ideal agents for applications such as photothermal cancer therapy, biosensing, and in vivo imaging. However,...

Precise control over the silica shell thickness and finding the optimal thickness for the peak heat diffusion property of AuNR@SiO2

Silica-coated gold nanorods (AuNRs) exhibit significantly enhanced photothermal effects and photoacoustic (PA) signal intensities, which is beneficial for various nanophotonic applications in materials science. However, the silica shell thickness for optimum enhancement is not fully understood and is even controversial depending on the physical state of the silica shell. This is because of the lack of systematic investigations of the nanoscale silica shell thickness and the photothermal effect. This study provides a robust synthetic method to control the silica shell thickness at the nanoscale and the physical state-dependent heat diffusion property. The selected base and solvent system enabled the production of silica-coated AuNRs (AuNR@SiO₂) with silica shell thicknesses of 5, 10, 15, 20, 25, 30, 35, and 40 nm. AuNRs with a 20 nm silica shell showed the highest photothermal effect with a 1.45-times higher photothermal efficiency than that of AuNRs without a silica shell. The low density of the silica shell on the AuNRs showed a low photothermal effect and photostability. It was found that the disruption of cetyltrimethyl ammonium bromide (CTAB) layers on the AuNRs was responsible for the low photostability of the AuNRs. The simulation study for the heat diffusion property showed facilitated heat diffusion in the presence of a 20 nm silica shell. In a cell-based study, AuNRs with a 20 nm silica shell showed the most sensitive photothermal effect for cell death. The results of this robust study can provide conclusive conditions for the optimal silica shell thickness to obtain the highest photothermal effect, which will be useful for the future design of nanomaterials in various fields of application.

Influence of Gold/Silver Ratio in Ablative Nanoparticles on Their Interaction with Aptamers and Functionality of the Obtained Conjugates

Nano-bio-conjugates, featuring noble metal gold-silver alloy nanoparticles, represent a versatile tool in diagnostics and therapeutics due to their plasmonic and antimicrobial properties tunable by the particle's gold molar fraction. However, little is known about how the binding of thiolated biomolecules to noble metal nanoparticles is influenced by the fraction of gold and silver atoms on the nanoparticle's surface and to which extend this would affect the functionality of the conjugated biomolecules. In this work, we generated gold-silver alloy nanoparticles with average diameters of 7-8 nm using the modern, surfactant-free laser ablation in liquids (LAL) synthesis approach. We conjugated them with thiolated miniStrep aptamer ligands at well-controlled aptamer-to-nanoparticle surface area ratios with maxima between 12 and 27 pmol aptamer/cm2 particle surface area. The results revealed a clear correlation between surface coverage and the nanoparticles' nominal gold/silver ratio, with maximum coverage reached for gold-rich alloys and a pronounced maximum for silver-rich alloys. However, the conjugates' functionality, evaluated by binding of streptavidin, was surprisingly robust and hardly affected by the nominal composition. However, 1.5 times higher surface coverage was needed to obtain maximum functionality in the silver-rich conjugates. Based on these results, it may be concluded that the nominal composition of gold-silver alloy nano-bioconjugates is freely tunable without a pronounced impact on the attached ligands' functionality, a finding highly relevant for the flexible design of nano-bio-conjugates for future biomedical applications. This study's results may facilitate the design of alloy nano-bio-conjugates for future applications in therapeutics and diagnostics.

Gold Nanorods: The Most Versatile Plasmonic Nanoparticles

Gold nanorods (NRs), pseudo-one-dimensional rod-shaped nanoparticles (NPs), have become one of the burgeoning materials in the recent years due to their anisotropic shape and adjustable plasmonic properties. With the continuous improvement in synthetic methods, a variety of materials have been attached around Au NRs to achieve unexpected or improved plasmonic properties and explore state-of-the-art technologies. In this review, we comprehensively summarize the latest progress on Au NRs, the most versatile anisotropic plasmonic NPs. We present a representative overview of the advances in the synthetic strategies and outline an extensive catalogue of Au-NR-based heterostructures with tailored architectures and special functionalities. The bottom-up assembly of Au NRs into preprogrammed metastructures is then discussed, as well as the design principles. We also provide a systematic elucidation of the different plasmonic properties associated with the Au-NR-based structures, followed by a discussion of the promising applications of Au NRs in various fields. We finally discuss the future research directions and challenges of Au NRs.

Optimization of Gold Nanorod Features for the Enhanced Performance of Plasmonic Nanocavity Arrays

Nanoplasmonic biosensors incorporating noble metal nanocavity arrays are widely used for the detection of various biomarkers. Gold nanorods (GNRs) have unique properties that can enhance spectroscopic detection capabilities of such nanocavity-based biosensors. However, the contribution of the physical properties of multiple GNRs to resonance enhancement of gold nanocavity arrays requires further characterization and elucidation. In this work, we study how GNR aspect ratio (AR) and surface area (SA) modify the plasmonic resonance spectrum of a gold triangular nanocavity array by both simulations and experiments. The finite integration technique (FIT) simulated the extinction spectrum of the gold nanocavity array with 300 nm periodicity onto which the GNRs of different ARs and SAs are placed. Simulations showed that matching of the GNRs longitudinal peak, which is affected by AR, to the nanocavity array's spectrum minima can optimize signal suppression and shifting. Moreover, increasing SA of the matched GNRs increased the spectral variations of the array. Experiments confirmed that GNRs conjugated to a gold triangular nanocavity array of 300 nm periodicity caused spectrum suppression and redshift. Our findings demonstrate that tailoring of the GNR AR and SA parameters to nanoplasmonic arrays has the potential to greatly improve spectral variations for enhanced plasmonic biosensing.

Thiolate end-group regulates ligand arrangement, hydration and affinity for small compounds in monolayer-protected gold nanoparticles

The ability to control the properties of monolayer protected gold nanoparticles (MPNPs) discloses unrevealed features stemming from collective properties of the ligands forming the monolayer and presents opportunities to design new materials. To date, the influence of ligand end-group size and capacity to form hydrogen bonds on structure and hydration of small MPNPs (<5 nm) has been poorly studied. Here, we show that both features determine ligands order, solvent accessibility, capacity to host hydrophobic compounds and interfacial properties of MPNPs. The polarity perceived by a radical probe and its binding constant with the monolayer investigated by electron spin resonance is rationalized by molecular dynamics simulations, which suggest that larger space-filling groups - trimethylammonium, zwitterionic and short polyethylene glycol - favor a radial organization of the thiolates, whereas smaller groups - as sulfonate - promote the formation of bundles. Zwitterionic ligands create a surface network of hydrogen bonds, which affects nanoparticle hydrophobicity and maximize the partition equilibrium constant of the probe. This study discloses the role of the chemistry of the end-group on monolayer features with effects that span from molecular- to nano-scale and opens the door to a shift in the conception of new MPNPs exploiting the end-group as a novel design motif.

Functionalized Gold Nanorod Probes: A Sophisticated Design of SERS Immunoassay for Biodetection in Complex Media

Surface-enhanced Raman scattering (SERS) probes offer considerable opportunities in label-based biosensing and analysis. However, achieving specific and reproducible performance, where low detection limits are needed in complex media, remains a challenge. Herein, we present a general strategy employing gold nanorod SERS probes and rationally designed surface chemistry involving protein resistant layers and antibodies to allow for the selective detection of species in complex media. By utilizing the ability of gold nanorods for selective surface modification, Raman reporters (4-mercaptobenzoic acid) were attached to the tips. Importantly, the sides of the nanorods were modified using a mixed layer of two different length stabilizing ligands (carboxyl-terminated oligo ethylene glycols) to ensure colloidal stability, while antibodies were attached to the stabilizing ligands. The nanoparticle interfacial design improves the colloidal stability, unlocks the capability of the probes for targeting biomolecules in complex matrices, and gives the probes the high SERS efficiency. The utility of this probe is demonstrated herein via the detection of Salmonella bacteria at the single bacterium level in complex food matrices using an anti-Salmonella IgG antibody-conjugated probe. The modular nature of the surface chemistry enables the SERS probes to be employed with a molecularly diverse range of biorecognition species (e.g., antibodies and peptides) for many different analytes, thus opening up new opportunities for efficient biosensing applications.

How Do Proteins Associate with Nanoscale Metal-Organic Framework Surfaces?

It is well known that colloidal nanomaterials, upon exposure to a complex biological medium, acquire biomolecules on their surface to form coronas. Porous nanomaterials present an opportunity to sequester biomolecules and/or control their orientation at the surface. In this report, a metal-organic framework (MOF) shell around gold nanorods was compared to MOF nanocrystals as potential protein sponges to adsorb several common proteins (lysozyme, beta-lactoglobulin-A, and bovine serum albumin) and potentially control their orientation at the surface. Even after correction for surface area, MOF shell/gold nanorod materials adsorbed more protein than the analogous nanoMOFs. For the set of proteins and nanomaterials in this study, all protein-surface interactions were exothermic, as judged by isothermal titration calorimetry. Protein display at the surfaces was determined from limited proteolysis experiments, and it was found that protein orientation was dependent both on the nature of the nanoparticle surface and on the nature of the protein, with lysozyme and beta-lactoglobulin-A showing distinct molecular positioning.

Oleylamine Impurities Regulate Temperature-Dependent Hierarchical Assembly of Ultranarrow Gold Nanowires on Biotemplated Interfaces

Nanocrystals are often synthesized using technical grade reagents such as oleylamine (OLAm), which contains a blend of 9-cis-octadeceneamine with trans-unsaturated and saturated amines. Here, we show that gold nanowires (AuNWs) synthesized with OLAm ligands undergo thermal transitions in interfacial assembly (ribbon vs. nematic); transition temperatures vary widely with the batch of OLAm used for synthesis. Mass spectra reveal that higher-temperature AuNW assembly transitions are correlated with an increased abundance of trans and saturated chains in certain blends. DSC thermograms show that both pure (synthesized) and technical-grade OLAm have primary melting transitions near -5 °C (20-30 °C lower than the literature melting temperature range of OLAm). A second, broader melting transition (in the previous reported melting range) appears in technical grade blends; its temperature varies with the abundance of trans and saturated chains. Our findings illustrate that, similar to biological membranes, blends of alkyl chains can be used to generate mesoscopic hierarchical nanocrystal assembly, particularly at interfaces that further modulate transition temperatures.