Enthalpic Effects of Chain Length and Unsaturation on Water Permeability across Droplet Bilayers of Homologous Monoglycerides

Electrophysiological Characterization of Monoolein-Fatty Acid Bilayers

Understanding the evolution of protocells, primitive compartments that distinguish self from nonself, is crucial for exploring the origin of life. Fatty acids and monoglycerides have been proposed as key components of protocell membranes due to their ability to self-assemble into bilayers and vesicles capable of nutrient exchange. In this study, we investigate the electrophysiological properties of planar bilayers composed of monoglyceride and fatty acid mixtures, using a droplet interface bilayer system. Three fatty acids with varying hydrocarbon chain lengths─oleic acid (C18), palmitoleic acid (C16), and myristoleic acid (C14)─in combination with monoolein (C18) are examined to evaluate the influence of chain length and composition on bilayer stability, thickness, and ion permeability. The results show that pure monoolein bilayers exhibit enhanced ion permeability compared to phospholipid bilayers, which are characteristic of modern cellular membranes. Furthermore, the incorporation of fatty acids into monoolein bilayers destabilizes the membrane structure and further increases ion permeability. We consider that this increased permeability is likely driven by three molecular characteristics. First, the wedge-like shape of monoolein may disrupt bilayer packing and induce transient pore formation. Second, the rapid flip-flop of fatty acids between bilayer leaflets likely facilitates ion transport. Third, the chain-length mismatch between monoolein and myristoleic acid further destabilizes the bilayer, promoting the formation of structural defects. These findings suggest that compositional motifs in monoglyceride-fatty acid bilayers may provide an alternative ion transport mechanism, such as the flip-flop of amphiphilic molecules, in early protocell membranes before the evolution of protein-based transporters.

The Role of Lipid Intrinsic Curvature in the Droplet Interface Bilayer

Model bilayers are constructed from lipids having different intrinsic curvatures using the droplet interface bilayer (DIB) method, and their static physicochemical properties are determined. Geometrical and tensiometric measurements are used to derive the free energy of formation (ΔF) of a two-droplet DIB relative to a pair of isolated aqueous droplets, each decorated with a phospholipid monolayer. The lipid molecules employed have different headgroup sizes but identical hydrophobic tail structure, and each is characterized by an intrinsic curvature value (c0) that increases in absolute value with decreasing size of headgroup. Mixtures of lipids at different ratios were also investigated. The role of curvature stress on the values of ΔF of the respective lipid bilayers in these model membranes is discussed and is illuminated by the observation of a decrement in ΔF that scales as a near linear function of c02. Overall, the results reveal an association that should prove useful in studies of ion channels and other membrane proteins embedded in model droplet bilayer systems that will impact the understanding of protein function in cellular membranes composed of lipids of high and low curvature.

Concentration-Dependent Effects of Curcumin on Membrane Permeability and Structure

Growing evidence suggests that many bioactive molecules can nonspecifically modulate the physicochemical properties of membranes and influence the action of embedded membrane proteins. This study investigates the interactions of curcumin with protein-free model membranes consisting of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and DOPC with cholesterol (4/1 mol ratio). The focus is on the capability of curcumin to modify membrane barrier properties such as water permeability assayed through the droplet interface bilayer (DIB) model membrane. For pure DOPC, our findings show a concentration-dependent biphasic effect: a reduction in water permeability is observed at low concentrations (up to 2 mol %), whereas at high concentrations of curcumin, water permeability increases. In the presence of cholesterol, we observed an overall reduction in water permeability. A combination of complementary experimental methods, including phase transition parameters studied by differential scanning calorimetry (DSC) and structural properties measured by attenuated total reflectance (ATR)-FTIR, provides a deeper understanding of concentration-dependent interactions of curcumin with DOPC bilayers in the absence and presence of cholesterol. Our experimental findings align with a molecular mechanism of curcumin's interaction with model membranes, wherein its effect is contingent on its concentration. At low concentrations, curcumin binds to the lipid-water interface through hydrogen bonding with the phosphate headgroup, thereby obstructing the transport of water molecules. Conversely, at high concentrations, curcumin permeates the acyl chain region, inducing packing disorders and demonstrating evidence of phase separation. Enhanced knowledge of the impact of curcumin on membranes, which, in turn, can affect protein function, is likely to be beneficial for the successful translation of curcumin into effective medicine.

Differential Effects of Soy Isoflavones on the Biophysical Properties of Model Membranes

The effects that the main soy isoflavones, genistein and daidzein, have upon the biophysical properties of a model lipid bilayer composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) or DOPC with cholesterol (4 to 1 mol ratio) have been investigated by transbilayer water permeability, differential scanning calorimetry, and confocal Raman microspectroscopy. Genistein is found to increase water permeability, decrease phase transition temperature, reduce enthalpy of transition, and induce packing disorder in the DOPC membrane with an increasing concentration. On the contrary, daidzein decreases water permeability and shows negligible impact on thermodynamic parameters and packing disorder at comparable concentrations. For a cholesterol-containing DOPC bilayer, both genistein and daidzein exhibit an overall less pronounced effect on transbilayer water permeability. Their respective differential abilities to modify the physical and structural properties of biomembranes with varying lipid compositions signify a complex and sensitive nature to isoflavone interactions, which depends on the initial state of bilayer packing and the differences in the molecular structures of these soy isoflavones, and provide insights in understanding the interactions of these molecules with cellular membranes.

Aspirin Interacts with Cholesterol-Containing Membranes in a pH-Dependent Manner

Aspirin has been used for broad therapeutic treatment, including secondary prevention of cardiovascular disease associated with increased cholesterol levels. Aspirin and other nonsteroidal anti-inflammatory drugs have been shown to interact with lipid membranes and change their biophysical properties. In this study, mixed lipid model bilayers made from 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC) or 1,2-dioleoyl-sn-glycero-3-phosphatidylcholine (DOPC) comprising varying concentrations of cholesterol (10:1, 4:1, and 1:1 mole ratio of lipid:chol), prepared by the droplet interface bilayer method, were used to examine the effects of aspirin at various pH on transbilayer water permeability. The presence of aspirin increases the water permeability of POPC bilayers in a concentration-dependent manner, with a greater magnitude of increase at pH 3 compared to pH 7. In the presence of cholesterol, aspirin is similarly shown to increase water permeability; however, the extent of the increase depends on both the concentration of cholesterol and the pH, with the least pronounced enhancement in water permeability at high cholesterol levels at pH 7. A fusion of data from differential scanning calorimetry, confocal Raman microspectrophotometry, and interfacial tensiometric measurements demonstrates that aspirin can promote significant thermal, structural, and interfacial property perturbations in the mixed-lipid POPC or DOPC membranes containing cholesterol, indicating a disordering effect on the lipid membranes. Our findings suggest that aspirin fluidizes phosphocholine membranes in both cholesterol-free and cholesterol-enriched states and that the overall effect is greater when aspirin is in a neutral state. These results confer a deeper comprehension of the divergent effects of aspirin on biological membranes having heterogeneous compositions, under varying physiological pH and different cholesterol compositions, with implications for a better understanding of the gastrointestinal toxicity induced by the long term use of this important nonsteroidal anti-inflammatory molecule.

Effects of lipid saturation on bicelle to vesicle transition of a binary phospholipid mixture: a molecular dynamics simulation study

Controlling the transition from lipid bicelles to vesicles is essential for producing engineered vesicles. We perform coarse-grained molecular dynamics (CGMD) simulations of unsaturated/saturated lipid mixtures to clarify the effects of lipid unsaturation on vesiculation at the molecular scale. The results demonstrate that vesiculation depends on the concentration of unsaturated lipids and the degree of unsaturation. The probability of vesiculation increases linearly with the apparent unsaturated lipid concentration at a low degree of unsaturation. Higher degrees of unsaturation lead to phase segregation within the binary bicelles, reducing the probability of vesiculation. A comparison between CGMD simulations and the conventional theory of vesiculation shows that the theoretical predictions of binary lipid systems must explicitly include phase segregation effects. Furthermore, simulations with biased lipid distributions reveal that vesiculation is facilitated by the preconcentration of unsaturated lipids in the core region of the bicelle but is then temporally limited as the unsaturated lipids move to the bicelle edges. These findings advance theoretical and experimental studies on binary lipid systems and promote the development of tailor-made vesicles.

Hydrophobin Bilayer as Water Impermeable Protein Membrane

One of the most important properties of membranes is their permeability to water and other small molecules. A targeted change in permeability allows the passage of molecules to be controlled. Vesicles made of membranes with low water permeability are preferable for drug delivery, for example, because they are more stable and maintain the drug concentration inside. This study reports on the very low water permeability of pure protein membranes composed of a bilayer of the amphiphilic protein hydrophobin HFBI. Using a droplet interface bilayer setup, we demonstrate that HFBI bilayers are essentially impermeable to water. HFBI bilayers withstand far larger osmotic pressures than lipid membranes. Only by disturbing the packing of the proteins in the HFBI bilayer is a measurable water permeability induced. To investigate possible molecular mechanisms causing the near-zero permeability, we used all-atom molecular dynamics simulations of various HFBI bilayer models. The simulations suggest that the experimental HFBI bilayer permeability is compatible neither with a lateral honeycomb structure, as found for HFBI monolayers, nor with a residual oil layer within the bilayer or with a disordered lateral packing similar to the packing in lipid bilayers. These results suggest that the low permeabilities of HFBI and lipid bilayers rely on different mechanisms. With their extremely low but adaptable permeability and high stability, HFBI membranes could be used as an osmotic pressure-insensitive barrier in situations where lipid membranes fail such as desalination membranes.

Challenges and opportunities in achieving the full potential of droplet interface bilayers

Model membranes can be used to elucidate the intricacies of the chemical processes that occur in cell membranes, but the perfectly biomimetic, yet bespoke, model membrane has yet to be built. Droplet interface bilayers are a new type of model membrane able to mimic some features of real cell membranes better than traditional models, such as liposomes and black lipid membranes. In this Perspective, we discuss recent work in the field that is starting to showcase the potential of these model membranes to enable the quantification of membrane processes, such as the behaviour of protein transporters and the prediction of in vivo drug movement, and their use as scaffolds for electrophysiological measurements. We also highlight the challenges that remain to enable droplet interface bilayers to achieve their full potential as artificial cells, and as biological analytical platforms to quantify molecular transport.

Trans-Resveratrol Decreases Membrane Water Permeability: A Study of Cholesterol-Dependent Interactions

Resveratrol (RSV), a biologically active plant phenol, has been extensively investigated for cancer prevention and treatment due to its ability to regulate intracellular targets and signaling pathways which affect cell growth and metastasis. The non-specific interactions between RSV and cell membranes can modulate physical properties of membranes, which in turn can affect the conformation of proteins and perturb membrane-hosted biological functions. This study examines non-specific interactions of RSV with model membranes having varying concentrations of cholesterol (Chol), mimicking normal and cancerous cells. The perturbation of the model membrane by RSV is sensed by changes in water permeability parameters, using Droplet Interface Bilayer (DIB) models, thermotropic properties from Differential Scanning Calorimetry, and structural properties from confocal Raman spectroscopy, all of which are techniques not complicated by the use of probes which may themselves perturb the membrane. The nature and extent of interactions greatly depend on the presence and absence of Chol as well as the concentration of RSV. Our results indicate that the presence of RSV decreases water permeability of lipid membranes composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), indicating a capability for RSV in stiffening fluidic membranes. When Chol is present, however, (at 4:1 and 2:1 mol ratio DOPC to cholesterol), the addition of RSV has no significant effect upon the water permeability. DSC thermograms show that RSV interacts with DOPC and DOPC/Chol bilayers and influences their thermotropic phase behavior in a concentration-dependent manner, by decreasing the main phase transition temperature and enthalpy, with a phase separation shown at the higher concentrations of RSV. Raman spectroscopic studies indicate an ordering effect of RSV on DOPC supported bilayer, with a lesser extent of ordering in the presence of Chol. Combined results from these investigations highlight a differential effect of RSV on Chol-free and Chol-enriched membranes, respectively, which results constitute a bellwether for increased understanding and effective use of resveratrol in disease therapy including cancer.

Physicochemical characteristics of droplet interface bilayers

Droplet interface bilayer (DIB) is a lipid bilayer formed when two lipid monolayer-coated aqueous droplets are brought in contact within an oil phase. DIBs, especially post functionalization, are a facile model system to study the biophysics of the cell membrane. Continued advances in enhancing and functionalizing DIBs to be a faithful cell membrane mimetic requires a deep understanding of the physicochemical characteristics of droplet interface bilayers. In this review, we provide a comprehensive overview of the current scientific understanding of DIB characteristics starting with the key experimental frameworks for DIB generation, visualization and functionalization. Subsequently we report experimentally measured physical, electrical and transport characteristics of DIBs across physiologically relevant lipids. Advances in simulations and mathematical modelling of DIBs are also discussed, with an emphasis on revealing principles governing the key physicochemical characteristics. Finally, we conclude the review with important outstanding questions in the field.

Differential Interaction of Cannabidiol with Biomembranes Dependent on Cholesterol Concentration

Cannabidiol (CBD), the major nonpsychoactive component of plant-derived cannabinoids, has been reported to have a broad range of potential beneficial pharmacological effects on the central nervous system (CNS). In this study, the droplet interface bilayer, a model cell membrane, is used to examine the effects of CBD on passive water permeability, a fundamental membrane biophysical property. The presence of CBD decreases the water permeability of model lipid membranes composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and at low concentrations of cholesterol (Chol) (20 mol %) in DOPC, whereas when higher concentrations of Chol are present (33 mol %), CBD has an opposing effect, increasing water permeability. The diametric effect in water permeability change upon addition of CBD to Chol-low and Chol-high bilayers signifies a variant interaction of CBD, depending on the initial state of bilayer packing and fluidity. Additionally, differential scanning calorimetry studies provide evidence that there are selective changes in thermotropic behavior for CBD with DOPC and with DOPC/Chol membranes, respectively, supportive of these varying membrane interactions of CBD dependent upon cholesterol. The intriguing ability of CBD to sensitively respond to membrane Chol concentrations in modifying physical properties highlights the significant impact that CBD can have on heterogeneous biomembranes including those of the CNS, the neurons of which are enriched in Chol to a point where up to a quarter of the body's total Chol is in the brain, and defective brain Chol homeostasis is implicated in neurodegenerative diseases.

Hierarchical Self-Assembly of Amphiphilic β-C-Glycosylbarbiturates into Multiresponsive Alginate-Like Supramolecular Hydrogel Fibers and Vesicle Hydrogel

Ordered molecular self-assembly of glycoamphiphiles has been regarded as an attractive, practical and bottom-up approach to obtain stable, structurally well-defined, and functional mimics of natural polysaccharides. This study describes a versatile and rational design of carbohydrate-based hydrogelators through N,N'-substituted barbituric acid-mediated Knoevenagel condensation onto unprotected carbohydrates in water. Amphiphilic N-substituted β-C-maltosylbarbiturates self-assembled into pH- and calcium-triggered alginate-like supramolecular hydrogel fibers with a multistimuli responsiveness to temperature, pH and competitive metal chelating agent. In addition, amphiphilic N,N'-disubstituted β-C-maltosylbarbiturates formed vesicle gels in pure water that were scarcely observed for glyco-hydrogelators. Finally, barbituric acid worked as a multitasking group allowing chemoselective ligation onto reducing-end carbohydrates, structural diversity, stimuli-sensitiveness, and supramolecular interactions by hydrogen bonding.

Ibuprofen and the Phosphatidylcholine Bilayer: Membrane Water Permeability in the Presence and Absence of Cholesterol

The interactions between drugs and cell membranes can modulate the structural and physical properties of membranes. The resultant perturbations of the membrane integrity may affect the conformation of the proteins inserted within the membrane, disturbing the membrane-hosted biological functions. In this study, the droplet interface bilayer (DIB), a model cell membrane, is used to examine the effects of ibuprofen, a nonsteroidal anti-inflammatory drug (NSAID), on transbilayer water permeability, which is a fundamental membrane biophysical property. Our results indicate that the presence of neutral ibuprofen (pH 3) increases the water permeability of the lipid membranes composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC). When cholesterol is present with the DOPC, however, the water permeability is not influenced by addition of ibuprofen, regardless of the cholesterol content in DOPC. Given the fact that cholesterol is generally considered to impact packing in the hydrocarbon chain regions, our findings suggest that a potential competition between opposing effects of ibuprofen molecules and cholesterol on the hydrocarbon core environment of the phospholipid assembly may influence the overall water transport phenomena. Results from confocal Raman microspectroscopy and interfacial tensiometry show that ibuprofen molecules induce substantial structural and dynamic changes in the DOPC lipid bilayer. These results, demonstrating that the presence of ibuprofen increases the water permeability of pure DOPC but not that of DOPC-cholesterol mixtures, provide insight into the differential effect of a representative NSAID on heterogeneous biological membranes, depending upon the local composition and structure, results which will signal increased understanding of the gastrointestinal damage and toxicity induced by these molecules.

Transport processes in equine oocytes and ovarian tissue during loading with cryoprotective solutions

BACKGROUND

Rational design of cryopreservation strategies for oocytes and ovarian cortex tissue requires insights in the rate at which cryoprotective agents (CPA) permeate and concomitant water transport takes place. The aim of the current study was to investigate possible differences in permeation kinetics of different CPAs (i.e., glycerol/GLY, ethylene glycol/EG, dimethyl sulfoxide/DMSO, and propylene glycol/PG), in equine oocytes as well as ovarian tissue.

METHODS

Membrane permeability of oocytes to water (Lp) and to CPAs (Ps) was inferred from video microscopic imaging of oocyte volume responses during perfusion with anisotonic and CPA solutions. CPA diffusion into ovarian tissue and tissue dehydration was monitored during incubation, using osmometer and weight measurements, to derive CPA diffusion coefficients (D).

RESULTS

Membrane permeability of oocytes towards CPAs was found to increase in the order GLY < EG < DMSO<PG. Permeability towards water in anisotonic solutions was determined to be higher than in CPA solutions, indicating CPAs alter membrane permeability properties. CPA diffusion in ovarian tissue increased in the order GLY,PG < EG,DMSO. Tissue dehydration was found to increase with exposure to increasing CPA concentrations, which inversely correlated with CPA diffusivity.

CONCLUSIONS

In conclusion, it is shown here that the rate of CPA movement across membrane bilayers is determined by different physical barrier factors than those determining CPA movement in tissues.

GENERAL SIGNIFICANCE

The parameters presented in this study can be applied in models describing solute and water transport in cells and tissues, as well as in cryopreservation protocols.

Enhanced water permeability across a physiological droplet interface bilayer doped with fullerenes

We measure the water permeability across a physiological lipid bilayer produced by the droplet interface bilayer (DiB) technique. This lipid bilayer can be considered as physiologically relevant because it presents a lipidic composition close to human cell membranes. The measured water permeability coefficients across this lipid bilayer are reported as a function of the cholesterol concentration. It is found that the water permeability coefficients decreased with increasing cholesterol concentration, in agreement with the existing literature. And, consistently, the extracted corresponding activation energies increase with increasing cholesterol concentration in the lipid bilayer. Hence having demonstrated the robustness of the experimental system, we extend this study by exploring the influence of fullerenes on the water permeability of a physiological lipid bilayer. Interestingly, we observe a significant increase of the measured water permeability coefficients across this lipid bilayer for large fullerenes concentration. This enhanced permeability might be related to the conductive properties of fullerenes.

We measure the water permeability across a physiological lipid bilayer produced by the droplet interface bilayer technique.

Unsaturation and Polar Head Effect on Gelation, Bioactive Release, and Cr/Cu Removal Ability of Glycolipids

Designing of multifunctional soft and smart materials from natural sources is a useful strategy for producing safer chemicals having potential applications in biomedical research and pharmaceutical industries. Herein, eight glycolipids with variation in unsaturation of hydrophobic tail and polar headgroup size were designed. The effect of unsaturation in the tail group and headgroup size on gelation ability, and mechanical and thermal stability of glycolipid hydro/organogels was studied to understand structure and property relationship. Glycolipids are functional amphiphilic molecules having potential applications in the field of drug delivery and metal removal. The encapsulation capacity and kinetic release behavior of hydrophobic/hydrophilic bioactives like curcumin/riboflavin from the hydrophobic/hydrophilic pockets of glycolipids hydro/organogels was examined. A significant observation was that the glucamine moiety of the glycolipid headgroup plays a vital role in removal of Cr and Cu from oil/water biphasic systems. Typical functions of the glycolipid hydrogels are metal chelation and enzyme-triggered release behavior, enabled them as promising material for Cr, Cu removal from edible oils and controlled release of water soluble/insoluble bioactives.

Design and Application of Stimulus-Responsive Droplets and Bubbles Stabilized by Phospholipid Monolayers

Biomimetic colloidal particles are promising agents for biosensing, but current technologies fall far short of Nature's capabilities for sensing, assessing, and responding to stimuli. Phospholipid-containing cell membranes are capable of binding and responding to an enormous variety of biomolecules by virtue of membrane organization and the presence of receptor proteins. By tuning the composition and functionalization of simulated membranes, soft colloids such as droplets and bubbles can be designed to respond to various stimuli. Moreover, because lipid monolayers can surround almost any hydrophobic phase, the interior of the colloid can be selected to provide a sensitive readout, for example in the form of optical microscopy or acoustic detection. In this work, we review some advances made by our group and others in the formulation of lipid-coated particles with different internal phases such as fluorocarbons, hydrocarbons, or liquid crystals. In some cases, binding or displacement of stabilizing lipids gives rise to conformational changes or disruptions in local membrane geometry, which can be amplified by the interior phase. In other cases, multivalent analytes can promote aggregation or even membrane fusion, which can be utilized for optical or acoustic readout. By highlighting a few recent examples, we hope to show that lipid monolayers represent an extremely versatile biosensing platform that can react to and detect biomolecules by leveraging the unique capabilities of phospholipid membranes.

Good to the Last Drop: Interfacial Droplet Chemistry, from Crystals to Biological Membranes

The study of the liquid-liquid interface has a long and storied history yet still holds important implications for science and technology. Although deep examination of this buried interface poses challenges, recent progress in experimental and theoretical methodology has allowed for advanced understanding of the molecular bases of such interfaces. This Account will focus on the behavior of surfaces of aqueous microdroplets immersed in an immiscible phase, exhibiting physicochemical behavior dependent on the presence of interfacial self-assembled structures. Amphiphiles spontaneously form self-assembled nanostructures at the liquid interface, creating a soft liquid surface for the aqueous microdroplet that can modulate its behavior. A prominent characteristic of a micron-sized droplet is its elevated surface area/volume ratio, a feature that presents opportunities for investigating the role of the interface in aspects of droplet chemistry. In two notable examples, a surfactant self-assembly can act as a template for crystal nucleation of droplet solutes at the monolayer level, while at the level of a bilayer, formed when two monolayer-covered droplets are made to adhere, the apposition of monolayers bears remarkable similarities to cell membranes. Each type of system provides arbitrary control of important factors, both for studying crystallization nucleation and for modeling semipermeable lipid membranes at an interdroplet contact zone, the droplet interface bilayer (DIB). The droplet bilayer allows for direct observation of species transport across an unsupported bilayer and versatile parameter control to expore the effects of membrane lipid structure on bilayer transport. It is demonstrated that molecular shape for monoglycerides and phospholipids influences the surface characteristics of monolayers and bilayers. Additionally, subtle interfacial interactions between aqueous contents (ions, solutes) and the monolayer/bilayer are shown to have a marked influence on lipid packing and permeability. It is anticipated that this successful demonstration of surface engineering at the micron scale will deliver cogent insights into many biologically relevant phenomena, such as membrane transport and biomineralization.

Enhanced delivery of lipophilic bioactives using emulsions: a review of major factors affecting vitamin, nutraceutical, and lipid bioaccessibility

Many researchers are currently developing emulsion-based delivery systems to increase the bioavailability of lipophilic bioactive agents, such as oil-soluble vitamins, nutraceuticals, and lipids. Oil-in-water emulsions can be specifically designed to improve the bioavailability of these bioactives by altering their composition and structural organization. This article reviews recent progress in understanding the impact of emulsion properties on the bioaccessibility of lipophilic bioactive agents, including oil phase composition, aqueous phase composition, droplet size, emulsifier type, lipid physical state, and droplet aggregation state. This knowledge can be used to design emulsions that can enhance the bioavailability and efficacy of encapsulated hydrophobic bioactives.

Effects of Acyl Chain Unsaturation on Activation Energy of Water Permeability across Droplet Bilayers of Homologous Monoglycerides: Role of Cholesterol

Cholesterol is an important component of total lipid in mammalian cellular membranes; hence, the knowledge of its association with lipid bilayer membranes will be essential to understanding membrane structure and function. A droplet interface bilayer (DIB) provides a convenient and reliable platform through which values for permeability coefficient and activation energy of water transport across the membrane can be extracted. In this study, we investigated the effect of acyl chain structure in amphiphilic monoglycerides on the permeability of water across DIB membranes composed of cholesterol and these monoglycerides, where the acyl chain length, number of double bonds, and the position of double bond are varied systematically along the acyl chains. To elucidate the role of cholesterol in these membranes, we investigated its influence on water permeability and associated activation energies at two different cholesterol concentrations. Our systematic studies show dramatic sensitivity and selectivity of specific interaction of cholesterol with the monoglyceride bilayer having structural variations in acyl chain compositions. Our findings allow us to delineate the exquisite interplay between membrane properties and structural components and understand the balanced contribution of each.

Quantitative Raman microspectroscopy for water permeability parameters at a droplet interface bilayer

Using confocal Raman microspectroscopy, we derive parameters for bilayer water transport across an isolated nanoliter aqueous droplet pair.