Restructuring of Lipid Membranes by an Arginine-Capped Peptide Bolaamphiphile

Novel Cationic Bolaamphiphiles for Protein and DNA Binding, Gene Delivery, and Antimicrobial Applications

In this study, we have designed and developed a cationic bolaform C12-(2,3-dihydroxy-N, N-dimethyl-N-(2-ureidoethyl)propan-1-aminium chloride)2 (C12(DDUPAC)2) that is derived from biocompatible molecules. The bolaform C12(DDUPAC)2 has hydroxyl (OH) functionality at both the cationic head groups. The impact of head group structure on the self-assembly and effectiveness of gene transfection and antimicrobial activity was investigated and compared with that of the hydrochloride salt C12-(N, N-dimethyl-N-(2-ureidoethan-1-aminium chloride)2 (C12(DUAC)2) of its precursor molecule. The formation of spherical as well as rod-like self-assembled structures was found to occur above a relatively low critical aggregation concentration (CAC) by the bolaforms. The results of calorimetric measurements demonstrated thermodynamically favorable aggregation in water. Interaction studies of the cationic bolaforms with the calf thymus DNA revealed stronger binding of C12(DDUPAC)2 in comparison to C12(DUAC)2, which explained higher in vitro gene transfection efficiency of C12(DDUPAC)2 than C12(DUAC)2. Both bolaforms interact weakly with the bovine serum albumin protein. MTT-based in vitro cytotoxicity assay was performed and both bolaforms were found to have marginal cytotoxicity. Further, both bolaforms exhibit advantageous antibacterial activity against E. coli and potent antifungal activity against Fusarium oxysporum at high dosages.

Effect of Chirality and Amphiphilicity on the Antimicrobial Activity of Tripodal Lysine-Based Peptides

A series of tripodal (three-arm) lysine-based peptides were designed and synthesized and their self-assembly properties in aqueous solution and antimicrobial activity were investigated. We compare the behaviors of homochiral tripodal peptides (KKY)3K and a homologue containing the bulky aromatic fluorenylmethoxycarbonyl (Fmoc) group Fmoc-(KKY)3K, and heterochiral analogues containing k (d-Lys), (kkY)3K and Fmoc-(kkY)3K. The molecular conformation and self-assembly in aqueous solutions were probed using various spectroscopic techniques, along with small-angle X-ray scattering (SAXS) and cryogenic-transmission electron microscopy (cryo-TEM). In cell viability assays using fibroblast cell lines, the tripodal peptides without Fmoc were observed to be noncytotoxic over the concentration range studied, and the Fmoc functionalized tripodal peptides were only cytotoxic at the highest concentrations (above the critical aggregation concentration of the lipopeptides). The molecules also show good hemocompatibility at sufficiently low concentration, and antimicrobial activity was assessed via MIC (minimum inhibitory concentration) and MBC (minimum bactericidal concentration) assays. These revealed that the Fmoc-functionalized tripodal peptides had significant activity against both Gram-negative and Gram-positive bacteria, and in the case of Gram-positive Staphylococcus aureus, the antimicrobial activity for Fmoc-(kkY)3K was improved compared to polymyxin B. The mechanism of the antimicrobial assay was found to involve rupture of the bacterial membrane as evident from fluorescence microscopy live/dead cell assays, and scanning electron microscopy images.

Interaction of Arginine-Rich Surfactant-like Peptide Nanotubes with Liposomes

The interaction of the surfactant-like peptide (SLP) R3L12 bearing three cationic arginine residues with model liposomes is investigated in aqueous solution at various pH values, under conditions for which the SLP self-assembles into nanotubes. The structure of liposomes of model anionic lipid DPPG [1,2-dipalmitoyl-sn-glycero-3-phospho-rac-(1-glycerol)], or zwitterionic lipid DPPE [1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine] is probed using small-angle X-ray scattering and cryogenic-transmission electron microscopy. The unilamellar vesicles of DPPG are significantly restructured in the presence of R3L12, especially at low pH, and multilamellar vesicles of DPPE are also restructured under these conditions. The SLP promotes the release of cargo encapsulated in the vesicles as probed by calcein fluorescence, with notably higher release for anionic DPPG vesicles. Laurdan fluorescence experiments to probe membrane fluidity (lipid chain ordering) show that R3L12 destabilizes the lipid gel phase, especially for anionic DPPG. This model nanotube-forming SLP has promise as a pH-sensitive release system for vesicle-encapsulated cargo.

Comparison of the self-assembly and cytocompatibility of conjugates of Fmoc (9-fluorenylmethoxycarbonyl) with hydrophobic, aromatic, or charged amino acids

The self-assembly in aqueous solution of three Fmoc-amino acids with hydrophobic (aliphatic or aromatic, alanine or phenylalanine) or hydrophilic cationic residues (arginine) is compared. The critical aggregation concentrations were obtained using intrinsic fluorescence or fluorescence probe measurements, and conformation was probed using circular dichroism spectroscopy. Self-assembled nanostructures were imaged using cryo-transmission electron microscopy and small-angle X-ray scattering (SAXS). Fmoc-Ala is found to form remarkable structures comprising extended fibril-like objects nucleating from spherical cores. In contrast, Fmoc-Arg self-assembles into plate-like crystals. Fmoc-Phe forms extended structures, in a mixture of straight and twisted fibrils coexisting with nanotapes. Spontaneous flow alignment of solutions of Fmoc-Phe assemblies is observed by SAXS. The cytocompatibility of the three Fmoc-amino acids was also compared via MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] mitochondrial activity assays. All three Fmoc-amino acids are cytocompatible with L929 fibroblasts at low concentration, and Fmoc-Arg shows cell viability up to comparatively high concentration (0.63 mM).

Impact of Linker Groups on Self-Assembly, Gene Transfection, Antibacterial Activity, and In Vitro Cytotoxicity of Cationic Bolaamphiphiles

Cationic bolaamphiphiles have gained significant attention in various research fields, including materials science, drug delivery, and gene therapy, due to their unique properties and potential applications. The objective of the current research is to develop more effective cationic bolaamphiphiles. Thus, we have designed and synthesized two cationic bolaamphiphiles (-(CH2)12(2,3-dihydroxy-N,N-dimethyl-N-(3-ureidopropyl)propan-1-aminium chloride))2 (C12(DDUPPAC)2)) and (-(CH2)12(N-(3-(carbamoyloxy)propyl)-2,3-dihydroxy-N,N-dimethylpropan-1-aminium chloride)2 (C12(CPDDPAC)2) containing urea and urethane linkages, respectively. We have investigated their self-assembly properties in water using several techniques, including surface tension, electrical conductivity, fluorescence probe, calorimetry, dynamic light scattering, and atomic force microscopy. Their biological applications, e.g., in vitro gene transfection, antibacterial activity, and cytotoxicity, were studied. Both bolaamphiphiles were observed to produce aggregates larger than spherical micelles above a relatively low critical aggregation concentration (cac). The calorimetric experiments suggested the thermodynamically favorable spontaneous aggregation of both bolaforms in water. The results of interaction studies led to the conclusion that C12(CPDDPAC)2 binds DNA with a greater affinity than C12(DDUPPAC)2. Also, C12(CPDDPAC)2 is found to act as a more efficient gene transfection vector than C12(DDUPPAC)2 in 264.7 cell lines. The in vitro cytotoxicity assay using MTT, however, revealed that neither of the bolaamphiphiles was toxic, even at higher quantities. Additionally, both bolaforms show beneficial antibacterial activity.

Self-Assembly and Antimicrobial Activity of Lipopeptides Containing Lysine-Rich Tripeptides

The conformation and self-assembly of two pairs of model lipidated tripeptides in aqueous solution are probed using a combination of spectroscopic methods along with cryogenic-transmission electron microscopy (cryo-TEM) and small-angle X-ray scattering (SAXS). The palmitoylated lipopeptides comprise C16-YKK or C16-WKK (with two l-lysine residues) or their respective derivatives containing d-lysine (k), i.e., C16-Ykk and C16-Wkk. All four molecules self-assemble into spherical micelles which show structure factor effects in SAXS profiles due to intermicellar packing in aqueous solution. Consistent with micellar structures, the tripeptides in the coronas have a largely unordered conformation, as probed using spectroscopic methods. The molecules are found to have good cytocompatibility with fibroblasts at sufficiently low concentrations, although some loss of cell viability is noted at the highest concentrations examined (above the critical aggregation concentration of the lipopeptides, determined from fluorescence dye probe measurements). Preliminary tests also showed antimicrobial activity against both Gram-negative and Gram-positive bacteria.

Small-angle scattering techniques for peptide and peptide hybrid nanostructures and peptide-based biomaterials

The use of small-angle scattering (SAS) in the study of the self-assembly of peptides and peptide conjugates (lipopeptides, polymer-peptide conjugates and others) is reviewed, highlighting selected research that illustrates different methods and analysis techniques. Both small-angle x-ray scattering (SAXS) and small-angle neutron scattering (SANS) are considered along with examples that exploit their unique capabilities. For SAXS, this includes the ability to perform rapid measurements enabling high throughput or fast kinetic studies and measurements under dilute conditions. For SANS, contrast variation using H2O/D2O mixtures enables the study of peptides interacting with lipids and TR-SANS (time-resolved SANS) studies of exchange kinetics and/or peptide-induced structural changes. Examples are provided of studies measuring form factors of different self-assembled structures (micelles, fibrils, nanotapes, nanotubes etc) as well as structure factors from ordered phases (lyotropic mesophases), peptide gels and hybrid materials such as membranes formed by mixing peptides with polysaccharides or peptide/liposome mixtures. SAXS/WAXS (WAXS: wide-angle x-ray scattering) on peptides and peptide hybrids is also discussed, and the review concludes with a perspective on potential future directions for research in the field.

Amyloid and Hydrogel Formation of a Peptide Sequence from a Coronavirus Spike Protein

We demonstrate that a conserved coronavirus spike protein peptide forms amyloid structures, differing from the native helical conformation and not predicted by amyloid aggregation algorithms. We investigate the conformation and aggregation of peptide RSAIEDLLFDKV, which is a sequence common to many animal and human coronavirus spike proteins. This sequence is part of a native α-helical S2 glycoprotein domain, close to and partly spanning the fusion sequence. This peptide aggregates into β-sheet amyloid nanotape structures close to the calculated pI = 4.2, but forms disordered monomers at high and low pH. The β-sheet conformation revealed by FTIR and circular dichroism (CD) spectroscopy leads to peptide nanotape structures, imaged using transmission electron microscopy (TEM) and probed by small-angle X-ray scattering (SAXS). The nanotapes comprise arginine-coated bilayers. A Congo red dye UV–vis assay is used to probe the aggregation of the peptide into amyloid structures, which enabled the determination of a critical aggregation concentration (CAC). This peptide also forms hydrogels under precisely defined conditions of pH and concentration, the rheological properties of which were probed. The observation of amyloid formation by a coronavirus spike has relevance to the stability of the spike protein conformation (or its destabilization via pH change), and the peptide may have potential utility as a functional material. Hydrogels formed by coronavirus peptides may also be of future interest in the development of slow-release systems, among other applications.

Peptide-Based Supramolecular Systems Chemistry

Peptide-based supramolecular systems chemistry seeks to mimic the ability of life forms to use conserved sets of building blocks and chemical reactions to achieve a bewildering array of functions. Building on the design principles for short peptide-based nanomaterials with properties, such as self-assembly, recognition, catalysis, and actuation, are increasingly available. Peptide-based supramolecular systems chemistry is starting to address the far greater challenge of systems-level design to access complex functions that emerge when multiple reactions and interactions are coordinated and integrated. We discuss key features relevant to systems-level design, including regulating supramolecular order and disorder, development of active and adaptive systems by considering kinetic and thermodynamic design aspects and combinatorial dynamic covalent and noncovalent interactions. Finally, we discuss how structural and dynamic design concepts, including preorganization and induced fit, are critical to the ability to develop adaptive materials with adaptive and tunable photonic, electronic, and catalytic properties. Finally, we highlight examples where multiple features are combined, resulting in chemical systems and materials that display adaptive properties that cannot be achieved without this level of integration.

Mechanistic process understanding of the self-assembling behaviour of asymmetric bolaamphiphilic short-peptides and their templating for silica and titania nanomaterials

Investigation of the self-assembly of peptides is critically important to clarify certain biophysical phenomena, fulfill some biological functions, and construct functional materials. However, it is still a challenge to precisely predict the self-assembled structures of peptides because of their complicated driving forces and various assembling pathways. In this work, to elucidate the effects of noncovalent interactions including hydrogen bonding, molecular geometry, and hydrophobic and electrostatic interactions on the peptide self-assembly, a series of asymmetric bolaamphiphilic short peptides consisting of Ac-EI₃K-NH₂ (EI₃K), Ac-EI₄K-NH₂ (EI₄K), Ac-KI₃E-NH₂ (KI₃E) and Ac-KI₄E-NH₂ (KI₄E) were designed and their self-assembling behaviors at different solution pH values were investigated systematically. The peptides self-assembled into twisted nanofibers under most conditions except for EI₄K in a strongly alkaline solution and KI₄E under a strongly acidic condition, in which they self-assembled into nanotubes via helical monolayer nanosheet intermediates. In particular, KI₄E nanotubes are formed under acidic conditions, and its diameters are ∼500 nm much greater than most of the self-assembled structures from bolaamphiphilic peptides. Moreover, reversible morphological transition between the nanotubes and twisted nanofibers was observed with the change in solution pH. Such tunable self-assembled structures and switchable surface properties of the asymmetric bolaamphiphilic short-peptides allow them to be used as templates to construct advanced materials. Silica and titania nanomaterials faithful to the peptide templates in morphology were prepared at ambient temperature. This work clearly elucidates the effects of noncovalent interactions on the peptide self-assembly and also provides new insights into the design and preparation of complicated inorganic materials from tunable organic templates.

Amphipathic design dictates self-assembly, cytotoxicity and cell uptake of arginine-rich surfactant-like peptides

Amphiphilicity is the most critical parameter in the self-assembly of surfactant-like peptides (SLPs), regulating the way by which hydrophobic attraction holds peptides together. Its effects go beyond supramolecular assembly and may also trigger different cell responses of bioactive peptide-based nanostructures. Herein, we investigate the self-assembly and cellular effects of nanostructures based on isomeric SLPs composed by arginine (R) and phenylalanine (F). Two amphipathic designs were studied: a diblock construct F4R4 and its bolaamphiphile analog R2F4R2. A strong sequence-dependent polymorphism emerges with appearance of globules and vesicle-like assemblies, or flat nanotapes and cylindrical micelles. The diblock construct possesses good cell penetrating capabilities and effectiveness to kill SK-MEL-28 melanoma tumor cells, in contrast to reduced intracellular uptake and low cytotoxicity exhibited by the bolaamphiphilic form. Our findings demonstrate that amphipathic design is a relevant variable for self-assembling SLPs to modulate different cellular responses and may assist in optimizing the production of nanostructures based on arginine-enriched sequences in cell penetrating and antimicrobial peptides.

Molecular dynamic simulations, GIAO-NMR and TD-DFT spectroscopy analyze for zwitterionic isoleucine (ILE)N , 1 ≤ N ≤ 6, in water solution

In this article, we investigate the effects of the isoleucine (ILE)_N amino acid chain growth, N = 1.0.6, the ILE conformational effect as well as the solvent presence on the electrical and magnetic spectroscopic properties when these compounds are in aqueous solution. Computational molecular dynamics simulations were performed to include the solvent medium and generate uncorrelated configurations involving solute-solvent structures. The charge point model for solvent was used to obtain the results for quantum mechanical calculation, in special DFT calculations, for (ILE)_N structures. Our results for the magnetic shielding constant obtained via GIAO-DFT-NMR calculations show that there is evidence of a magnetic behavior that characterizes the number of peptide bonds and, therefore, how the N isoleucine polypeptide chain is composed. TD-DFT results also show an absorption band shift to larger wavelengths indicating a dependence on N growth.

Impact of antimicrobial peptides on E. coli-mimicking lipid model membranes: correlating structural and dynamic effects using scattering methods

Using X-rays and neutrons we address the effect of AMPs on structure and dynamics of lipids in bacterial model membranes.

Selective Antibacterial Activity and Lipid Membrane Interactions of Arginine-Rich Amphiphilic Peptides

The self-assembly behavior and antimicrobial activity of two designed amphiphilic peptides, R3F3 and R4F4, containing short hydrophobic phenylalanine (F) and cationic arginine (R) sequences, are investigated. The conformation of the peptides was examined using circular dichroism and FTIR spectroscopy, which show that they have a disordered secondary structure. Concentration-dependent fluorescence assays show the presence of a critical aggregation concentration (cac) for each peptide. Above the cac, small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) reveal a population of twisted tapes for R3F3 and nanosheets for R4F4. The interaction of the peptides with model bacterial membranes comprising mixtures of the lipids DPPG [1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol] and DPPE [1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine], was studied using SAXS and cryogenic-TEM. Analysis of the SAXS structure factor indicates that R3F3 interacts with lipid bilayers by inducing correlation between bilayers, whereas R4F4 interacts with the bilayers causing an increase in polydispersity of the vesicle wall thickness. Both peptides break vesicles with a 1:3 DPPG:DPPE composition, which is close to the ratio of PG and PE lipids observed in the lipid membrane of Pseudomonas aeruginosa, a pathogen responsible for serious infections and which has developed antimicrobial resistant strains. Both peptides show activity against this bacterium in planktonic form. Peptide R4F4 shows particularly strong bioactivity against this microbe, with a minimum inhibitory concentration (MIC) value in the range of concentrations where the peptide is cytocompatible. It was further shown to have activity against other Pseudomonas species including the common plant pathogen Pseudomonas syringae. Finally, we show that R4F4 inhibits the development of P. aeruginosa biofilms. This was examined in detail and a proposed mechanism involving binding of the signaling molecule c-di-GMP is suggested, based on circular dichroism spectroscopy studies and Congo red assays of extracellular polysaccharides produced by the stressed bacteria. Thus, R4F4 is a promising candidate antimicrobial peptide with activity against Pseudomonas species.

Self-Assembly, Antimicrobial Activity, and Membrane Interactions of Arginine-Capped Peptide Bola-Amphiphiles

The self-assembly and antimicrobial activity of two novel arginine-capped bola-amphiphile peptides, namely RA6R and RA9R (R, arginine; A, alanine) are investigated. RA6R does not self-assemble in water due to its high solubility, but RA9R self-assembles above a critical aggregation concentration into ordered nanofibers due to the high hydrophobicity of the A9block. The structure of the RA9R nanofibers is studied by cryogenic transmission electron microscopy (cryo-TEM) and small-angle X-ray scattering (SAXS). Circular dichroism spectroscopy shows that both RA6R and RA9R adopt coil conformations in water at low concentration, but only RA9R adopts a β-sheet conformation at high concentration. SAXS and differential scanning calorimetry are used to study RA6R and RA9R interactions with a mixed lipid membrane that models a bacterial cell wall, consisting of multilamellar 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol/1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine vesicles. Cytotoxicity studies show that RA6R is more cytocompatible than RA9R. RA6R has enhanced activity against the Gram-negative pathogen P. aeruginosa at a concentration where viability of mammalian cells is retained. RA9R has little antimicrobial activity, independently of concentration. Our results highlight the influence of the interplay between relative charge and hydrophobicity on the self-assembly, cytocompatibility, and bioactivity of peptide bola-amphiphiles.

Peptide-Stabilized Emulsions and Gels from an Arginine-Rich Surfactant-like Peptide with Antimicrobial Activity

The preparation of hydrogels and stable emulsions is important in the formulation of many functional nanostructured soft materials. We investigate the multifunctional self-assembly and bioactivity properties of a novel surfactant-like peptide (SLP) that shows antimicrobial activity, is able to form hydrogels without pH adjustment, and is able to stabilize oil-in-water emulsions. Furthermore, we demonstrate on-demand de-emulsification in response to the protease enzyme elastase. We show that SLP (Ala)9-Arg (A9R) forms β-sheet fibers above a critical aggregation concentration and that water-in-oil emulsions are stabilized by a coating of β-sheet fibers around the emulsion droplets. Furthermore, we demonstrate enzyme-responsive de-emulsification, which has potential in the development of responsive release systems. The peptide shows selective antimicrobial activity against Gram-negative pathogens including Pseudomonas aeruginosa, which causes serious infections. Our results highlight the utility of SLPs in the stabilization of oil/water emulsions and the potential for these to be used to formulate antimicrobial peptide emulsions which are additionally responsive to protease. The peptide A9R has pronounced antibacterial activity against clinically challenging pathogens, and its ability to form β-sheet fibers plays a key role in its diverse structural properties, ranging from hydrogel formation to emulsion stabilization.

Enhancing the Potency of Antimicrobial Peptides through Molecular Engineering and Self-Assembly

Healthcare-associated infections resulting from bacterial attachment and biofilm formation on medical implants are posing significant challenges in particular with the emergence of bacterial resistance to antibiotics. Here, we report the design, synthesis and characterization of self-assembled nanostructures, which integrate on their surface antibacterial peptides. The antibacterial WMR peptide, which is a modification of the native sequence of the myxinidin, a marine peptide isolated from the epidermal mucus of hagfish, was used considering its enhanced activity against Gram-negative bacteria. WMR was linked to a peptide segment of aliphatic residues (AAAAAAA) containing a lipidic tail (C₁₉H₃₈O₂) attached to the ε-amino of a terminal lysine to generate a peptide amphiphile (WMR PA). The self-assembly of the WMR PA alone, or combined with coassembling shorter PAs, was studied using spectroscopy and microscopy techniques. The designed PAs were shown to self-assemble into stable nanofiber structures and these nanoassemblies significantly inhibit biofilm formation and eradicate the already formed biofilms of Pseudomonas aeruginosa (Gram-negative bacteria) and Candida albicans (pathogenic fungus) when compared to the native WMR peptide. Our results provide insights into the design of peptide based supramolecular assemblies with antibacterial activity, and establish an innovative strategy to develop self-assembled antimicrobial materials for biomedical applications.

Resolving the structural interactions between antimicrobial peptides and lipid membranes using small-angle scattering methods: the case of indolicidin

Using small angle X-ray and neutron scattering (SAXS/SANS) and detailed theoretical modelling we have elucidated the structure of the antimicrobial peptide, indolicidin, and the interaction with model lipid membranes of different anionic lipid compositions mimicking typical charge densities found in the cytoplasmic membrane of bacteria. First, we show that indolicidin displays a predominantly disordered, random chain conformation in solution with a small fraction (≈1%) of fiber-like nanostructures that are not dissolved at higher temperatures. The peptide is shown to strongly interact with the membranes at all charge densities without significantly perturbing the lipid bilayer structure. Instead, the results show that indolicidin inserts into the outer leaflet of the lipid vesicles causing a reduced local order of the lipid packing. This result is supported by an observed change in the melting point of the lipids upon addition of the peptide, as seen by differential scanning calorimetry experiments. The peptide does not to our observation affect the thickness of the membrane or form distinct structural pores in the membrane at physiologically relevant concentrations as has been previously suggested as an important mode of action. Finally, using sophisticated contrast variation SANS, we show that the peptide does not affect the random lateral distribution of anionic lipids in the membrane. Together, these results demonstrate that the structural aspects of the mode of action of antimicrobial peptides can be elucidated in detail using SAS techniques with liposomes as model systems.