Poly(sulfobetaine) versus Poly(N-isopropylmethacrylamide): Co-Nonsolvency-Type Behavior of Thin Films in a Water/Methanol Atmosphere

One-Step Digital Light Processing 3D Printing of Robust, Conductive, Shape-Memory Hydrogel for Customizing High-Performance Soft Devices

Mechanically robust and electrically conductive hydrogels hold significant promise for flexible device applications. However, conventional fabrication methods such as casting or injection molding meet challenges in delivering hydrogel objects with complex geometric structures and multicustomized functionalities. Herein, a 3D printable hydrogel with excellent mechanical properties and electrical conductivity is implemented via a facile one-step preparation strategy. With vat polymerization 3D printing technology, the hydrogel can be solidified based on a hybrid double-network mechanism involving in situ chemical and physical dual cross-linking. The hydrogel consists of two chemical networks including covalently cross-linked poly(acrylamide-co-acrylic acid) and chitosan, and zirconium ions are induced to form physically cross-linked metal-coordination bonds across both chemical networks. The 3D-printed hydrogel exhibits multiple excellent functionalities including enhanced mechanical properties (680% stretchability, 15.1 MJ/m3 toughness, and 7.30 MPa tensile strength), rapid printing speed (0.7-3 s/100 μm), high transparency (91%), favorable ionic conductivity (0.75 S/m), large strain gauge factor (≥7), and fast solvent transfer induced phase separation (in ∼3 s), which enable the development of high-performance flexible wearable sensors, shape memory actuators, and soft pneumatic robotics. The 3D printable multifunctional hydrogel provides a novel path for customizing next-generation intelligent soft devices.

Temperature-Governed Microstructure of Poly(vinyl alcohol) Hydrogels Prepared through Mixed-Solvent-Induced Phase Separation

The formation of phase-separated structures in hydrogels plays a crucial role in determining their optical and mechanical properties. Traditionally, phase-separated hydrogels are prepared through a two-step process involving initial hydrogel synthesis followed by post-treatment. In this study, we present an approach for temperature-governed phase separation microstructure modulation in hydrogels, harnessing the cononsolvency effect. This method allows the phase-separated structure to develop during hydrogel synthesis, significantly simplifying the preparation process. Importantly, we found that the preparation temperature has a substantial effect on the internal structure of the phase-separated hydrogel. We systematically investigated how the temperature influences the phase structure, optical properties, and mechanical performance of these hydrogels. The resulting hydrogels demonstrate excellent moisturizing and antifreezing capabilities. Additionally, the incorporation of sodium chloride imparts remarkable electrical conductivity to the hydrogels, making them suitable for strain sensing applications across a wide temperature range.

Dynamic Behavior of Poly(N-isopropylmethacrylamide) in Neat Water and in Water/Methanol Mixtures

We investigate the collective dynamics of thermoresponsive polymer poly(N-isopropylmethacrylamide) (PNIPMAM) in aqueous solution and in water/methanol mixtures in the one-phase region. In neat water, the polymer concentration c is varied in a wide range around the overlap concentration c*, that is estimated at 23 g L-1. Using dynamic light scattering (DLS), two decays ("modes") are consistently observed in the intensity autocorrelation functions for c = 2-150 g L-1 with relaxation rates which are proportional to the square of the momentum transfer. Below c*, these are attributed to the diffusion of single chains and to clusters from PNIPMAM that are formed due to hydrophobic interactions. Above c*, they are assigned to the diffusion of the chain segments between overlap points and to long-range concentration fluctuations. From the temperature-dependent behavior of the overall scattering intensities and the dynamic correlation lengths of the fast mode, the critical temperatures and the scaling exponents are determined. The latter are significantly lower than the static values predicted by mean-field theory, which may be related to the presence of the large-scale inhomogeneities. The effect of the cosolvent methanol on the dynamics is investigated for polymer solutions having c = 30 g L-1 and methanol volume fractions in the solvent mixtures of up to 60 vol %. The phase diagram was established by differential scanning calorimetry. The slow mode detected by DLS becomes significantly weaker as methanol is added, i.e., the solutions become more homogeneous. Beyond the minimum of the coexistence line, which is located at 40-50 vol % of methanol, the dynamics is qualitatively different from the one at lower methanol contents. Thus, going from the water-rich to the methanol-rich side of the miscibility gap, the change of interaction of the PNIPMAM chains with the two solvents has a severe effect on the collective dynamics.

Effect of Embedded g-C3N4 Nanosheets on the Hydration and Thermal Response Behavior of Cross-Linked Thermoresponsive Copolymer Films

The effect of embedded graphitic carbon nitride (g-C3N4) nanosheets on hydration and thermal response behavior of cross-linked thermoresponsive poly(di(ethylene glycol) methyl ether methacrylate-co-oligo(ethylene glycol) methyl ether methacrylate), abbreviated as P(MA-co-MA300), thin films is probed by white light interferometry. Compared with that of the cross-linked pure P(MA-co-MA300) films, the surface roughness of the cross-linked hybrid films is slightly increased, which is caused by the minor aggregation of g-C3N4 nanosheets during the spin-coating process. After exposure to a water vapor atmosphere, both cross-linked pure and hybrid films can absorb water and swell. However, the introduction of g-C3N4 not only induces a larger hydration extent but also triggers a nonlinear transition behavior upon heating. This prominent difference might be related to the residual hydrophilic groups (-NH2 and N-H) on the surface of g-C3N4 nanosheets, which enhance the interaction and absorption capability for water molecules in the hybrid films. Upon further increasing the amount of embedded g-C3N4 nanosheets in films, more hydrogen bonds are formed and a larger hydration extent of films is observed. To break all of the hydrogen bonds in films, a higher transition temperature (TT) is required. The observed hydration and transition behaviors of hybrid films can be used to design hydrogel-based films for hydrogen evolution or wastewater treatment.

Influence of the Atmosphere on the Wettability of Polymer Brushes

Polymer brushes, i.e., end-tethered polymer chains on substrates, are sensitive to adaptation, e.g., swelling, adsorption, and reorientation of the surface molecules. This adaptation can originate from a contacting liquid or atmosphere for partially wetted substrates. The macroscopic contact angle of the aqueous drop can depend on both adaptation mechanisms. We analyze how the atmosphere around an aqueous droplet determines the resulting contact angle of the wetting droplet on polymer brush surfaces. Poly(N-isopropylacrylamide) (PNiPAAm)-based brushes are used due to their exceptional sensitivity to solvation and liquid mixture composition. We develop a method that reliably measures wetting properties when the drop and the surrounding atmosphere are not in equilibrium, e.g., when evaporation and condensation tend to contaminate the liquid of the drop and the atmosphere. For this purpose, we use a coaxial needle in the droplet, which continuously exchanges the wetting liquid, and in addition, we constantly exchange the almost saturated atmosphere. Depending on the wetting history, PNiPAAm can be prepared in two states, state A with a large water contact angle (∼65°) and state B with a small water contact angle (∼25°). With the coaxial needle, we can demonstrate that the water contact angle of a sample in state B significantly increases by ∼30° when a water-free atmosphere is almost saturated with ethanol, compared to an ethanol-free atmosphere at 50% relative humidity. For a sample in state A, the relative humidity has little influence on the water contact angle.

Thermoresponsive and co-nonsolvency behavior of poly(N-vinyl isobutyramide) and poly(N-isopropyl methacrylamide) as poly(N-isopropyl acrylamide) analogs in aqueous media

Sets of the nonionic polymers poly(N-vinyl isobutyramide) (pNVIBAm) and poly(N-isopropyl methacrylamide) (pNIPMAm) are synthesized by radical polymerization covering the molar mass range from about 20,000 to 150,000 kg mol−1, and their thermoresponsive and solvent-responsive behaviors in aqueous solution are studied. Both polymers feature a lower critical solution temperature (LCST) apparently of the rare so-called type II, as characteristic for their well-studied analogue poly(N-isopropyl acrylamide) (pNIPAm). Moreover, in analogy to pNIPAm, both polymers exhibit co-nonsolvency behavior in mixtures of water with several co-solvents, including short-chain alcohols as well as a range of polar aprotic solvents. While the cloud points of the aqueous solutions are a few degrees higher than those for pNIPAm and increase in the order pNIPAm < pNVIBAm < pNIPMAm, the co-nonsolvency behavior becomes less pronounced in the order pNIPAm > pNVIBAm > pNIPMAm. Exceptionally, pNIPMAm does not show co-nonsolvency in mixtures of water and N,N-dimethylformamide.

Graphical Abstract

Highly Sensitive Zwitterionic Hydrogel Sensor for Motion and Pulse Detection with Water Retention, Adhesive, Antifreezing, and Self-Healing Properties

The design and synthesis of conductive hydrogels with antifreezing, long-term stable, highly sensitive, self-healing, and reusable is a critical procedure to enable applications in flexible electronics, medical monitoring, soft robotics, etc. Herein, a novel zwitterionic composite hydrogel possessing antifreezing, fast self-healing performance, water retention, and adhesion was synthesized via a simple one-pot method. LiCl, as an electrolyte and antifreeze, was promoted to dissociate under the electrostatic interaction with zwitterions, resulting in the composite hydrogels with high electrical conductivity (7.95 S/m) and excellent antifreeze ability (-45.3 °C). Meanwhile, the composite hydrogels could maintain 97% of the initial water content after exposed to air (25 °C, 55% RH) for 1 week due to the presence of salt ions. Moreover, the active groups of zwitterions could form conformal adhesion between the composite hydrogels and skin, which was particularly crucial for the stable signal output of the sensor. The dynamic borate ester bonds, active group of zwitterions, and the hydrogen bond between different components could achieve rapid self-healing (2 h, self-healing efficiency to 97%) without any external intervention. Notably, the developed P_BAS-Li (poly(vinyl alcohol) _Borax/acrylamide/zwitterionic-LiCl) hydrogel not only succeeded in sensitively detecting human motions but also could precisely captured handwritings signals and subtle pulse waves on the neck and wrist. The above findings demonstrated the great potential of P_BAS-Li hydrogels in the field of flexible electronic devices.

Poly(sulfobetaine)-Based Diblock Copolymer Thin Films in Water/Acetone Atmosphere: Modulation of Water Hydration and Co-nonsolvency-Triggered Film Contraction

The water swelling and subsequent solvent exchange including co-nonsolvency behavior of thin films of a doubly thermo-responsive diblock copolymer (DBC) are studied via spectral reflectance, time-of-flight neutron reflectometry, and Fourier transform infrared spectroscopy. The DBC consists of a thermo-responsive zwitterionic (poly(4-((3-methacrylamidopropyl) dimethylammonio) butane-1-sulfonate)) (PSBP) block, featuring an upper critical solution temperature transition in aqueous media but being insoluble in acetone, and a nonionic poly(N-isopropylmethacrylamide) (PNIPMAM) block, featuring a lower critical solution temperature transition in water, while being soluble in acetone. Homogeneous DBC films of 50-100 nm thickness are first swollen in saturated water vapor (H₂O or D₂O), before they are subjected to a contraction process by exposure to mixed saturated water/acetone vapor (H₂O or D₂O/acetone-d6 = 9:1 v/v). The affinity of the DBC film toward H₂O is stronger than for D₂O, as inferred from the higher film thickness in the swollen state and the higher absorbed water content, thus revealing a pronounced isotope sensitivity. During the co-solvent-induced switching by mixed water/acetone vapor, a two-step film contraction is observed, which is attributed to the delayed expulsion of water molecules and uptake of acetone molecules. The swelling kinetics are compared for both mixed vapors (H₂O/acetone-d6 and D₂O/acetone-d6) and with those of the related homopolymer films. Moreover, the concomitant variations of the local environment around the hydrophilic groups located in the PSBP and PNIPMAM blocks are followed. The first contraction step turns out to be dominated by the behavior of the PSBP block, whereas the second one is dominated by the PNIPMAM block. The unusual swelling and contraction behavior of the latter block is attributed to its co-nonsolvency behavior. Furthermore, we observe cooperative hydration effects in the DBC films, that is, both polymer blocks influence each other's solvation behavior.

Fundamentals and Applications of Polymer Brushes in Air

For several decades, high-density, end-tethered polymers, forming so-called polymer brushes, have inspired scientists to understand their properties and to translate them to applications. While earlier research focused on polymer brushes in liquids, it was recently recognized that these brushes can find application in air as well. In this review, we report on recent progress in unraveling fundamental concepts of brushes in air, such as their vapor-swelling and solvent partitioning. Moreover, we provide an overview of the plethora of applications in air (e.g., in sensing, separations or smart adhesives) where brushes can be key components. To conclude, we provide an outlook by identifying open questions and issues that, when solved, will pave the way for the large scale application of brushes in air.

Cononsolvency of thermoresponsive polymers: where we are now and where we are going

Cononsolvency is an intriguing phenomenon where a polymer collapses in a mixture of good solvents. This cosolvent-induced modulation of the polymer solubility has been observed in solutions of several polymers and biomacromolecules, and finds application in areas such as hydrogel actuators, drug delivery, compound detection and catalysis. In the past decade, there has been a renewed interest in understanding the molecular mechanisms which drive cononsolvency with a predominant emphasis on its connection to the preferential adsorption of the cosolvent. Significant efforts have also been made to understand cononsolvency in complex systems such as micelles, block copolymers and thin films. In this review, we will discuss some of the recent developments from the experimental, simulation and theoretical fronts, and provide an outlook on the problems and challenges which are yet to be addressed.

Vapor sorption in binary polymer brushes: The effect of the polymer-polymer interface

Polymer brushes attract vapors that are good solvents for polymers. This is useful in sensing and other technologies that rely on concentrating vapors for optimal performance. It was recently shown that vapor sorption can be enhanced further by incorporating two incompatible types of polymers A and B in the brushes: additional vapor adsorbs at the high-energy polymer-polymer interface in these binary brushes. In this article, we present a model that describes this enhanced sorption in binary brushes of immiscible A-B polymers. To do so, we set up a free-energy model to predict the interfacial area between the different polymer phases in binary brushes. This description is combined with Gibbs adsorption isotherms to determine the adsorption at these interfaces. We validate our model with coarse-grained molecular dynamics simulations. Moreover, based on our results, we propose design parameters (A-B chain fraction, grafting density, vapor, and A-B interaction strength) for optimal vapor absorption in coatings composed of binary brushes.

Salt-Dependent Phase Transition Behavior of Doubly Thermoresponsive Poly(sulfobetaine)-Based Diblock Copolymer Thin Films

The water vapor-induced swelling, as well as subsequent phase-transition kinetics, of thin films of a diblock copolymer (DBC) loaded with different amounts of the salt NaBr, is investigated in situ. In dilute aqueous solution, the DBC features an orthogonally thermoresponsive behavior. It consists of a zwitterionic poly(sulfobetaine) block, namely, poly(4-(N-(3'-methacrylamidopropyl)-N,N-dimethylammonio) butane-1-sulfonate) (PSBP), showing an upper critical solution temperature, and a nonionic block, namely, poly(N-isopropylmethacrylamide) (PNIPMAM), exhibiting a lower critical solution temperature. The swelling kinetics in D₂O vapor at 15 °C and the phase transition kinetics upon heating the swollen film to 60 °C and cooling back to 15 °C are followed with simultaneous time-of-flight neutron reflectometry and spectral reflectance measurements. These are complemented by Fourier transform infrared spectroscopy. The collapse temperature of PNIPMAM and the swelling temperature of PSBP are found at lower temperatures than in aqueous solution, which is attributed to the high polymer concentration in the thin-film geometry. Upon inclusion of sub-stoichiometric amounts (relative to the monomer units) of NaBr in the films, the water incorporation is significantly increased. This increase is mainly attributed to a salting-in effect on the zwitterionic PSBP block. Whereas the addition of NaBr notably shifts the swelling temperature of PSBP to lower temperatures, the collapse temperature of PNIPMAM remains unaffected by the presence of salt in the films.

Flexible Sample Environment for the Investigation of Soft Matter at the European Spallation Source: Part II—The GISANS Setup

The FlexiProb project is a joint effort of three soft matter groups at the Universities of Bielefeld, Darmstadt, and Munich with scientific support from the European Spallation Source (ESS), the small-K advanced diffractometer (SKADI) beamline development group of the Jülich Centre for Neutron Science (JCNS), and the Heinz Maier-Leibnitz Zentrum (MLZ). Within this framework, a flexible and quickly interchangeable sample carrier system for small-angle neutron scattering (SANS) at the ESS was developed. In the present contribution, the development of a sample environment for the investigation of soft matter thin films with grazing-incidence small-angle neutron scattering (GISANS) is introduced. Therefore, components were assembled on an optical breadboard for the measurement of thin film samples under controlled ambient conditions, with adjustable temperature and humidity, as well as the optional in situ recording of the film thickness via spectral reflectance. Samples were placed in a 3D-printed spherical humidity metal chamber, which enabled the accurate control of experimental conditions via water-heated channels within its walls. A separately heated gas flow stream supplied an adjustable flow of dry or saturated solvent vapor. First test experiments proved the concept of the setup and respective component functionality.