Cargo Encapsulation in Uniform, Length-Tunable Aqueous Nanofibers with a Coaxial Crystalline and Amorphous Core

Mechanism of Action and Design of Potent Antibacterial Block Copolymer Nanoparticles

Self-assembled polymer nanoparticles are promising antibacterials, with nonspherical morphologies of particular interest as recent work has demonstrated enhanced antibacterial activity relative to their spherical counterparts. However, the reasons for this enhancement are currently unclear. We have performed a multifaceted analysis of the antibacterial mechanism of action of 1D nanofibers relative to nanospheres by the use of flow cytometry, high-resolution microscopy, and evaluations of the antibacterial activity of pristine and tetracycline-loaded nanoparticles. Low-length dispersity, fluorescent diblock copolymer nanofibers with a crystalline poly(fluorenetrimethylenecarbonate) (PFTMC) core (length = 104 and 472 nm, height = 7 nm, width = 10-13 nm) and a partially protonated poly(dimethylaminoethyl methacrylate) (PDMAEMA) corona (length = 12 nm) were prepared via seeded growth living crystallization-driven self-assembly. Their behavior was compared to that of analogous nanospheres containing an amorphous PFTMC core (diameter of 12 nm). While all nanoparticles were uptaken into Escherichia coli W3110, crystalline-core nanofibers were observed to cause significant bacterial damage. Drug loading studies indicated that while all nanoparticle antibacterial activity was enhanced in combination with tetracycline, the enhancement was especially prominent when small nanoparticles (ca. 15-25 nm) were employed. Therefore, the identified differences in the mechanism of action and the demonstrated consequences for nanoparticle size and morphology control may be exploited for the future design of potent antibacterial agents for overcoming antibacterial resistance. This study also reinforces the requirement of morphological control over polymer nanoparticles for biomedical applications, as differences in activity are observed depending on their size, shape, and core-crystallinity.

Length-Dependent Cellular Internalization of Nanobody-Functionalized Poly(2-oxazoline) Nanorods

The ability to target specific tissues and to be internalized by cells is critical for successful nanoparticle-based targeted drug delivery. Here, we combined "stealthy" rod-shaped poly(2-oxazoline) (POx) nanoparticles of different lengths with a cancer marker targeting nanobody and a fluorescent cell internalization sensor via a heat-induced living crystallization-driven self-assembly (CDSA) strategy. A significant increase in association and uptake driven by nanobody-receptor interactions was observed alongside nanorod-length-dependent kinetics. Importantly, the incorporation of the internalization sensor allowed for quantitative differentiation between cell surface association and internalization of the targeted nanorods, revealing unprecedented length-dependent cellular interactions of CDSA nanorods. This study highlights the modularity and versatility of the heat-induced CDSA process and further demonstrates the potential of POx nanorods as a modular nanomedicine platform.

Kinetically Controlled Star Copolymer Self-Assembly for Rapid Fabrication of Nanoparticles with High Encapsulation Capacity

Rapid and scalable self-assembly of an amphiphilic 21-arm star copolymer, (polystyrene-block-polyethylene glycol)21 [(PS-b-PEG)21 ] in aqueous solution has been performed by reverse solvent exchange procedure. Transmission electron microscope (TEM) and nanoparticle tracking analysis (NTA) reveal the formation of nanoparticles with narrow size distribution. Further investigation indicates a kinetically controlled self-assembly mechanism of the copolymers, in which the star topology of the amphiphilic copolymer and deep quenching condition by reverse solvent exchange are key to accelerate intrachain contraction of the copolymer during phase separation. When interchain contraction dominant over interchain association, nanoparticles with low aggregation number could be formed. Thanks to the high hydrophobic contents of the (PS-b-PEG)21 polymers, the resulted nanoparticles could encapsulate a high capacity of hydrophobic cargo up to 19.84 %. The kinetically controlled star copolymer self-assembly process reported here provides a platform for the rapid and scalable fabrication of nanoparticle with high drug loading capacity (LC), which may find broad range of applications in, for example drug delivery, nanopesticide.

A Red-Light-Responsive DASA-Polymer with High Water Stability for Controlled Release

Photoresponsive polymers hold vast potential in the realm of drug delivery. Currently, most photoresponsive polymers use ultraviolet (UV) light as the excitation source. However, the limited penetration ability of UV light within biological tissues serves as a significant hindrance to their practical applications. Given the strong penetration ability of red light in biological tissues, the design and preparation of a novel red-light-responsive polymer with high water stability, incorporating the reversible photoswitching compound and donor-acceptor Stenhouse adducts (DASA) for controlled drug release is demonstrated. In aqueous solutions, this polymer exhibits self-assembly into micellar nanovectors (~33 nm hydrodynamic diameter), facilitating the encapsulation of the hydrophobic model drug Nile red (NR) within the micellar core. Upon irradiation by a 660 nm LED light source, photons are absorbed by DASA, leading to the disruption of the hydrophilic-hydrophobic balance of the nanovector and thereby resulting in the release of NR. This newly designed nanovector incorporates red light as a responsive switch, successfully avoiding the problems of photodamage and limited penetration of UV light within biological tissues, thereby further promoting the practical applications of photoresponsive polymer nanomedicines.

Uniform Two-Dimensional Crystalline Platelets with Tailored Compositions for pH Stimulus-Responsive Drug Release

Two-dimensional, size-tunable, water-dispersible particle micelles with spatially defined chemistries can be obtained by using "living" crystallization-driven self-assembly (CDSA) approach. Nevertheless, a major obstacle of crystalline particles in drug delivery application is the difficulty in accessing to cargo within crystalline cores. In the present work, we design four different types of biocompatible two-dimensional platelets with a crystalline poly(ε-caprolactone) (PCL) core, a hydrophobic poly(4-vinylprydine) (P4VP) segment, and a water dispersible poly(N,N-dimethyl acrylamide) (PDMA) block in ethanol by seeded growth method. Transferring those uniform platelets with tailored compositions to an aqueous solution in the presence of a hydrophobic drug leads to efficient encapsulation of the cargo in the P4VP segments via hydrophobic interactions. These drug-loaded platelets exhibit pH-responsive release behavior in aqueous media due to the protonated-deprotonated process of P4VP blocks in acidic and neutral solutions. This work provides initial insight into biocompatible PCL platelets with low dispersity and precise chemistry control in stimulus-responsive drug delivery fields.

Multicompartment Nanoparticles by Crystallization-Driven Self-Assembly of Star Polymers: Combining High Stability and Loading Capacity

Herein novel multicompartment nanoparticles (MCNs) that combine high stability and cargo loading capacity are developed. The MCNs are fabricated by crystallization-driven self-assembly (CDSA) of a tailor-made 21 arm star polymer, poly(L-lactide)[poly(tert-butyl acrylate)-block-poly(ethylene glycol)]₂₀ [PLLA(PtBA-b-PEG)₂₀ ]. Platelet-like or spherical MCNs containing a crystalline PLLA core and hydrophobic PtBA subdomains are formed and stabilized by PEG. Hydrophobic cargos, such as Nile Red and chemotherapeutic drug doxorubicin, can be successfully encapsulated into the collapsed PtBA subdomains with loading capacity two orders of magnitude higher than traditional CDSA nanoparticles. Depolarized fluorescence measurements of the Nile Red loaded MCNs suggest that the free volume of the hydrophobic chains in the nanoparticles may be the key for regulating their drug loading capacity. In vitro study of the MCNs suggests excellent cytocompatibility of the blank nanoparticles as well as a dose-dependent cellular uptake and cytotoxicity of the drug-loaded MCNs.

Length-Controlled Nanofiber Micelleplexes as Efficient Nucleic Acid Delivery Vehicles

Micelleplexes show great promise as effective polymeric delivery systems for nucleic acids. Although studies have shown that spherical micelleplexes can exhibit superior cellular transfection to polyplexes, to date there has been no report on the effects of micelleplex morphology on cellular transfection. In this work, we prepared precision, length-tunable poly(fluorenetrimethylenecarbonate)-b-poly(2-(dimethylamino)ethyl methacrylate) (PFTMC₁₆-b-PDMAEMA₁₃₁) nanofiber micelleplexes and compared their properties and transfection activity to those of the equivalent nanosphere micelleplexes and polyplexes. We studied the DNA complexation process in detail via a range of techniques including cryo-transmission electron microscopy, atomic force microscopy, dynamic light scattering, and ζ-potential measurements, thereby examining how nanofiber micelleplexes form, as well the key differences that exist compared to nanosphere micelleplexes and polyplexes in terms of DNA loading and colloidal stability. The effects of particle morphology and nanofiber length on the transfection and cell viability of U-87 MG glioblastoma cells with a luciferase plasmid were explored, revealing that short nanofiber micelleplexes (length < ca. 100 nm) were the most effective delivery vehicle examined, outperforming nanosphere micelleplexes, polyplexes, and longer nanofiber micelleplexes as well as the Lipofectamine 2000 control. This study highlights the potential importance of 1D micelleplex morphologies for achieving optimal transfection activity and provides a fundamental platform for the future development of more effective polymeric nucleic acid delivery vehicles.

Self-Assembly of Copolymers Containing Crystallizable Blocks: Strategies and Applications

The self-assembly of copolymers containing crystallizable block in solution has received increasing attentions in the past few years. Various strategies including crystallization-driven self-assembly (CDSA) and polymerization-induced CDSA (PI-CDSA) have been widely developed. Abundant self-assembly morphologies were captured and advanced applications have been attempted. In this review, the synthetic strategies including the mechanisms and characteristics are highlighted, the survey on the advanced applications of crystalline nano-assemblies are collected. This review is hoped to depict a comprehensive outline for self-assembly of copolymers containing crystallizable block in recent years and to prompt the development of the self-assembly technology in interdisciplinary field. This article is protected by copyright. All rights reserved.

Precision polymer nanofibers with a responsive polyelectrolyte corona designed as a modular, functionalizable nanomedicine platform

We describe the development of a modular, functionalizable platform for biocompatible core-shell block copolymer nanofibers of controlled length (22 nm – 1.3 μm) and low dispersity produced via living crystallization-driven...

Uniform, Length-Tunable Antibacterial 1D Diblock Copolymer Nanofibers

The rapid increase in antibiotic resistant strains of bacteria has led to an urgent need to develop new methods of treating bacterial infections. Antibacterial polymeric nanoparticles are of interest for...

Hydrophobic Cargo Loading at the Core-Corona Interface of Uniform, Length-Tunable Aqueous Diblock Copolymer Nanofibers with a Crystalline Polycarbonate Core

1D core-shell nanoparticles are considered to be among the most promising for biomedical applications such as drug delivery. The versatile living crystallization-driven self-assembly (CDSA) seeded growth method allows access to...

Polyphosphonate-Based Macromolecular RAFT-CTA Enables the Synthesis of Well-Defined Block Copolymers Using Vinyl Monomers

Reversible addition-fragmentation chain transfer (RAFT) polymerization has become a straightforward approach to block copolymers using a wide variety of functional vinyl monomers. Polyphosphoester (PPE) macroinitiators from ring-opening polymerization (ROP) of their corresponding cyclic phosphoesters have been previously prepared for atom transfer radical polymerization; however, to date, these biodegradable macroinitiators for RAFT polymerization have not been reported. Herein, a macromolecular RAFT-chain transfer agent (CTA) based on poly(ethyl ethylene phosphonate) was prepared by the organocatalytic ROP of 2-ethyl-2-oxo-1,3,2-dioxaphospholane using 2-cyano-5-hydroxypentan-2-yl dodecyl trithiocarbonate as the initiator and 1,8-diazabycyclo[5.4.0]undec-7-ene as the catalyst. Precise macro-CTAs of degrees of polymerization (DP_n) from 34 to 70 with Đ ≤ 1.10 were prepared and used in the dioxane solution RAFT polymerization of acrylamide, acrylates, methacrylates, and 2-vinylpyridine to yield a library of well-defined block copolymers. Additionally, the PPE-based macro RAFT-CTA was used as a nonionic surfactant in a typical aqueous emulsion polymerization of styrene to produce well-defined nanoparticles with the hydrophilic PPEs on their surface as the stabilizing agent. This general protocol allowed the combination of polyphosphoesters with RAFT polymerization.

Precise Synthesis of π-Conjugated Block Copolymers and Polymerization-Induced Chiral Self-Assembly toward Helical Nanofibers with Circularly Polarized Luminescence

Precise synthesis and efficient self-assembly of semiconducting polymers are of great interest. Herein, we report the controlled synthesis of π-conjugated poly(phenyl isocyanide)-b-poly(phenyleneethylene) (PPI-b-PPE) copolymers via chain extension of ethynyl 4-iodobenzene initiated by Pd(II)-terminated helical poly(phenyl isocyanide) (PPI). The in-situ-generated block copolymers self-assembled into various supramolecular architectures depending on the PPE length. The helical PPI segment induced the block copolymers with an appropriate PPE length self-assemble into helical nanofibers with a controlled size and defined helicity. Interestingly, the chiral assemblies of the block copolymers exhibit intense optical activity and emit clear circularly polarized luminescence.