Mussel-Inspired Coatings by Photoinduced Electron-Transfer Reactions: Photopolymerization of Dopamine under UV, Visible, and Daylight under Oxygen-Free Conditions

Dual-step photo-induced self-assembled hydrogel for endogenous oral mucosal wound healing

By introducing piezoelectric materials into hydrogel oral dressings, a microelectric field could be generated under stress stimulation, thus facilitating oral wound healing. However, to adapt to the moist and dynamic environment of the oral cavity, traditional "step-by-step" synthesis often requires the combination of materials with different functionalities. Given the property differences between these materials, this strategy typically involves complex experimental procedures and unnecessary energy consumption. In this study, with the concept of "integrated construction", we innovatively proposed a dual-step photo-induced method and successfully fabricated composite hydrogels with excellent performance. We introduced abundant oxygen vacancies into ZnO, leveraging the enhanced interface dynamics to achieve sustained photo-induced effect. With a double-network polymer framework as a template, this method could achieve the photo-induced spontaneous in-situ synthesis of polydopamine (PDA) within hydrogel without any extra special experimental conditions and complex operation procedures. We conducted a thorough analysis of the mechanism underlying this photo-induced method and applied the as-prepared hydrogel for the treatment of oral wounds, which significantly accelerated the healing process due to the outstanding comprehensive performance of hydrogel. These results suggest novel ideas and theoretical support for the facile construction of high-performance hydrogels based on photodynamic principles, demonstrating immense potential for future applications in wound dressings.

NIR-activated catechol-functionalized nanodiamond nanofibers for accelerating on-demand MRSA and E. coli biofilm eradication

The rise of antibiotic resistance has made bacterial infections a persistent global health issue. In particular, extracellular polymeric substances (EPS) secreted by bacteria limit the effectiveness of conventional antibiotics, making biofilm removal challenging. To address this, we created ND@PDA nanoparticles by coating the surface of nanodiamonds (ND) with polydopamine (PDA). These nanoparticles were then integrated into polyvinyl alcohol to fabricate PVA/ND@PDA nanofiber scaffolds, resulting in an innovative platform with enhanced photothermal, antibacterial and antibiofilm properties. Upon exposure to near-infrared (NIR) light, the scaffolds exhibited a significant photothermal activity, oxidative stress and effectively damaging key bacterial components, such as biofilm, bacterial membranes, and proteins. Additionally, the catechol groups in PDA provided strong cell adhesion and high biocompatibility on the nanofiber surface. Our research proposes a platform that not only effectively addresses antibiotic-resistant infections but also contributes to advancements in wound healing therapies by enabling controlled antibacterial action with minimal toxicity.

Phenothiazine Derivative-Based Photoinitiators for Ultrafast Sunlight-Induced Free Radical Polymerization and Rapid Precision 3D Printing

In this work, we introduce twenty-six phenothiazine derivatives (PTZs) that were designed and synthesized as visible light photoinitiators. These compounds, in combination with an amine [ethyl 4-(dimethylamino)benzoate (EDB)] and an iodonium salt [di-tert-butylphenyl iodonium hexafluorophosphate (Iod)], could furnish high-performance three-component (PTZs/EDB/Iod) photoinitiating systems that were employed for the free radical polymerization of thick films of a low-viscosity model acrylate resin, namely, trimethylolpropane triacrylate (TMPTA) under visible light and sunlight exposure. A commercial thioxanthone, i.e., isopropylthioxanthone (ITX) was selected to design a reference ITX/EDB/Iod photoinitiating system. Double bond conversions of 87% and 76% were measured for the developed and synthesized photoinitiating systems under 405 and 450 nm light-emitting diode irradiation, respectively, and a conversion as high as 70% could be determined under sunlight irradiation─about 23 times higher than the conversion obtained with the comparable system prepared with the commercial photoinitiator. The relevant photoinitiation abilities and photochemical mechanisms are comprehensively investigated by a combination of techniques including real-time Fourier transform infrared spectroscopy, UV-visible absorption spectroscopy, fluorescence spectroscopy, steady-state photolysis, cyclic voltammetry, and electron paramagnetic resonance. Notably, the exceptional performance of the photoinitiators enabled the fabrication of 3D objects with precise morphology and superior resolution through 3D printing and direct laser write techniques. These findings not only provide opportunities for efficient polymerization under artificial and natural light conditions but also pave the way for scalable, cost-effective, environmentally sustainable, and green chemistry-driven curing applications.

Preparation and characterization of mussel-inspired chitosan/polydopamine films and their feasibility for oral mucosa application

Oral mucosal lesions (OML), which represent a major public health issue worldwide, include any pathological changes in the oral mucosa, such as ulcers, pigmentation, and swelling. Due to its humid and dynamic complex environment, designing oral mucosal preparations poses significant challenges. Drawing inspiration from mussels, this study employed an eco-friendly one-pot strategy for the preparation of chitosan/polydopamine (CS/PDA) films. We demonstrated that CS-induced polymerization of dopamine monomers under acidic conditions, which might be attributed to the large number of hydrogen bonding sites of CS chains. PDA markedly enhances properties of the CS film and exhibits concentration dependence. At the concentration of 1 wt% PDA, the lap-shear strength and tensile strength of CS/PDA films reached 5.01 ± 0.24 kpa and 4.20 ± 0.78 kpa, respectively, indicating that the mucosal adhesion ability was significantly improved. In comparison with the single CS film, the swelling rate of CS/PDA film decreased by about 30 %. Rheological results also showed that the storage modulus returned to 93 % after cyclic large strain, while the single CS film only recovered to 73 %. Moreover, these films demonstrated good biocompatibility and enhanced oral ulcer healing in rats, providing a new and practical option for the local treatment of OML.

Electron Transfer Drives the Photosensitized Polymerization of Contrast Agents by Flavoprotein Tags for Correlative Microscopy

Singlet oxygen generation has long been considered the key feature that allows genetically encoded fluorescent tags to produce polymeric contrast agents for electron microscopy. Optimization of the singlet oxygen sensitization quantum yield has not included the effects of electron-rich monomers on the sensitizer's photocycle. We report that at monomer concentrations employed for staining, quenching by electron transfer is the primary deactivation pathway for photoexcitations. A simple photochemical model including contributions from both processes reproduces the observed reaction rates and indicates that most of the product is driven by pathways that involve electron transfer with monomers─not by the sensitization of singlet oxygen. Realizing the importance of these competing reaction pathways offers a new paradigm to guide the development of genetically encodable tags and suggests opportunities to expand the materials scope and growth conditions for polymeric contrast agents (e.g., biocompatible monomers, O2 poor environments).

Deciphering the Impact of Nucleosides and Nucleotides on Copper Ion and Dopamine Coordination Dynamics

The mode of coordination of copper(II) ions with dopamine (DA, L) in the binary, as well as ternary systems with Ado, AMP, ADP, and ATP (L') as second ligands, was studied with the use of experimental-potentiometric and spectroscopic (VIS, EPR, NMR, IR)-methods and computational-molecular modeling and DFT-studies. In the Cu(II)/DA system, depending on the pH value, the active centers of the ligand involved in the coordination with copper(II) ions changed from nitrogen and oxygen atoms (CuH(DA)3+, Cu(DA)2+), via nitrogen atoms (CuH2(DA)24+), to oxygen atoms at strongly alkaline pH (Cu(DA)22+). The introduction of L' into this system changed the mode of interaction of dopamine from oxygen atoms to the nitrogen atom in the hydroxocomplexes formed at high pH values. In the ternary systems, the ML'-L (non-covalent interaction) and ML'HxL, ML'L, and ML'L(OH)x species were found. In the Cu(II)/DA/AMP or ATP systems, mixed forms were formed up to a pH of around 9.0; above this pH, only Cu(II)/DA complexes occurred. In contrast to systems with AMP and ATP, ternary species with Ado and ADP occurred in the whole pH range at a high concentration, and moreover, binary complexes of Cu(II) ions with dopamine did not form in the detectable concentration.

Combining Step-Growth and Chain-Growth Polymerizations in One Pot: Light-Induced Fabrication of Conductive Nanoporous PEDOT-PCL Scaffold

A novel method based on light-induced fabrication of a poly (3,4-ethylenedioxythiophene)-polycaprolactone (PEDOT-PCL) scaffold using phenacyl bromide (PAB) as a single-component photoinitiator is presented. HBr released from the step-growth polymerization of EDOT is utilized as an in situ catalyst for the chain-growth polymerization of ε-caprolactone. Detailed investigations disclose the formation of a self-assembled nanoporous electroconductive scaffold (1.2 mS cm-1 ). Fluorescence emission spectra of the fabricated scaffold exhibit a mixed solvatochromic behavior, indicating specific interactions between the self-assembled scaffold and solvents with varying polarities, as evidenced by transmission electron microscopy (TEM). Moreover, the same light-induced technique can also be applied for bulk photopolymerization showcasing the versatility and wide-ranging scope of the originated method. In brief, this study introduces a novel approach for light-induced polymerization reactions that is merging step-growth and chain-growth mechanisms. This innovative approach is promising to facilitate in situ polymerization of monomers possessing diverse functionalities.

Polydopamine nanomaterials and their potential applications in the treatment of autoimmune diseases

The conventional treatment methods used for the management of autoimmune diseases (ADs) have limited efficacy and also exhibit significant side effects. Thus, identification of novel strategies to improve the efficacy and safety of ADs treatment is urgently required. Overactivated immune response and oxidative stress are common characteristics associated with ADs. Polydopamine (PDA), as a polymer material with good antioxidant and photothermal conversion properties, has displayed useful application potential against ADs. In addition, PDA possesses good biosafety, simple preparation, and easy functionalization, which is conducive for the pharmacological development of PDA nanomaterials with clinical transformation prospects. Here, we have first reviewed the preparation of PDA, the different functional integration strategies of PDA-based biomaterials, and their potential applications in ADs. Next, the mechanism of action of PDA in ADs has been elaborated in detail. Finally, the application opportunities and challenges linked with PDA nanomaterials for ADs treatment are discussed. This review is contributed to design reasonable and effective PDA nanomaterials for the diagnosis and treatment of ADs.

Microfluidic Invasion Chemotaxis Platform for 3D Neurovascular Co-Culture

Advances in microfabrication and biomaterials have enabled the development of microfluidic chips for studying tissue and organ models. While these platforms have been developed primarily for modeling human diseases, they are also used to uncover cellular and molecular mechanisms through in vitro studies, especially in the neurovascular system, where physiological mechanisms and three-dimensional (3D) architecture are difficult to reconstruct via conventional assays. An extracellular matrix (ECM) model with a stable structure possessing the ability to mimic the natural extracellular environment of the cell efficiently is useful for tissue engineering applications. Conventionally used techniques for this purpose, for example, Matrigels, have drawbacks of owning complex fabrication procedures, in some cases not efficient enough in terms of functionality and expenses. Here, we proposed a fabrication protocol for a GelMA hydrogel, which has shown structural stability and the ability to imitate the natural environment of the cell accurately, inside a microfluidic chip utilizing co-culturing of two human cell lines. The chemical composition of the synthesized GelMA was identified by Fourier transform infrared spectrophotometry (FTIR), its surface morphology was observed by field emission electron microscopy (FESEM), and the structural properties were analyzed by atomic force microscopy (AFM). The swelling behavior of the hydrogel in the microfluidic chip was imaged, and its porosity was examined for 72 h by tracking cell localization using immunofluorescence. GelMA exhibited the desired biomechanical properties, and the viability of cells in both platforms was more than 80% for seven days. Furthermore, GelMA was a viable platform for 3D cell culture studies and was structurally stable over long periods, even when prepared by photopolymerization in a microfluidic platform. This work demonstrated a viable strategy to conduct co-culturing experiments as well as modeling invasion and migration events. This microfluidic assay may have application in drug delivery and dosage optimization studies.

High-Precision Micropatterning of Polydopamine by Multiphoton Lithography

Mussel-inspired polydopamine (PDA) initiates a multifunctional modification route that leads to the generation of novel advanced materials and their applications. However, existing PDA deposition techniques still exhibit poor spatial control, have a very limited capability of micropatterning, and do not allow local tuning of the PDA topography. Herein, PDA deposition based on multiphoton lithography (MPL) is demonstrated, which enables full spatial and temporal control with nearly total freedom of patterning design. Using MPL, 2D microstructures of complex design are achieved with pattern precision of 0.8 µm without the need of a photomask or stamp. Moreover, this approach permits adjusting the morphology and thickness of the fabricated microstructure within one deposition step, resulting in a unique tunability of material properties. The chemical composition of PDA is confirmed and its ability for protein enzyme immobilization is demonstrated. This work presents a new methodology for high-precision and complete control of PDA deposition, enabling PDA incorporation in applications where fine and precise local surface functionalization is required. Possible applications include multicomponent functional elements and devices in microfluidics or lab-on-a-chip systems.