Microgels with Linear Thermosensitivity in a Wide Temperature Range

Effect of Embedded g-C3N4 Nanosheets on the Hydration and Thermal Response Behavior of Cross-Linked Thermoresponsive Copolymer Films

The effect of embedded graphitic carbon nitride (g-C3N4) nanosheets on hydration and thermal response behavior of cross-linked thermoresponsive poly(di(ethylene glycol) methyl ether methacrylate-co-oligo(ethylene glycol) methyl ether methacrylate), abbreviated as P(MA-co-MA300), thin films is probed by white light interferometry. Compared with that of the cross-linked pure P(MA-co-MA300) films, the surface roughness of the cross-linked hybrid films is slightly increased, which is caused by the minor aggregation of g-C3N4 nanosheets during the spin-coating process. After exposure to a water vapor atmosphere, both cross-linked pure and hybrid films can absorb water and swell. However, the introduction of g-C3N4 not only induces a larger hydration extent but also triggers a nonlinear transition behavior upon heating. This prominent difference might be related to the residual hydrophilic groups (-NH2 and N-H) on the surface of g-C3N4 nanosheets, which enhance the interaction and absorption capability for water molecules in the hybrid films. Upon further increasing the amount of embedded g-C3N4 nanosheets in films, more hydrogen bonds are formed and a larger hydration extent of films is observed. To break all of the hydrogen bonds in films, a higher transition temperature (TT) is required. The observed hydration and transition behaviors of hybrid films can be used to design hydrogel-based films for hydrogen evolution or wastewater treatment.

Mesoporous Silica and Oligo (Ethylene Glycol) Methacrylates-Based Dual-Responsive Hybrid Nanogels

Polymeric-inorganic hybrid nanomaterials have emerged as novel multifunctional platforms because they combine the intrinsic characteristics of both materials with unexpected properties that arise from synergistic effects. In this work, hybrid nanogels based on mesoporous silica nanoparticles, oligo (ethylene glycol) methacrylates, and acidic moieties were developed employing ultrasound-assisted free radical precipitation/dispersion polymerization. Chemical structure was characterized by infrared spectroscopy and nuclear magnetic resonance. Hydrodynamic diameters at different temperatures were determined by dynamic light scattering, and cloud point temperatures were determined by turbidimetry. Cell viability in fibroblast (NIH 3T3) and human prostate cancer (LNCaP) cell lines were studied by a standard colorimetric assay. The synthetic approach allows covalent bonding between the organic and inorganic components. The composition of the polymeric structure of hybrid nanogels was optimized to incorporate high percentages of acidic co-monomer, maintaining homogeneous nanosized distribution, achieving appropriate volume phase transition temperature values for biomedical applications, and remarkable pH response. The cytotoxicity assays show that cell viability was above 80% even at the highest nanogel concentration. Finally, we demonstrated the successful cell inhibition when they were treated with camptothecin-loaded hybrid nanogels.

A Zwitterionic-Aromatic Motif-Based ionic skin for highly biocompatible and Glucose-Responsive sensor

Electronic skins that can sense external stimuli have been of great significance in artificial intelligence and smart wearable devices in recent years. However, most of current skin materials are unable to achieve high biocompatibility and anti-bacterial activity, which are particularly critical to wearable sensors for neonatal/premature monitoring or tissue-interfaced biosensors (such as electronic wound dressing and smart contact lens). Herein, a zwitterionic-aromatic motif-based conductive hydrogel with electrostatic and π-π interactions is designed for the development of ionic skin sensors. The hydrogel possesses high biocompatibility, anti-bacterial activity, especially glucose-responsive property which has not been achieved by previous ionic skins. Due to its unique molecular design, the zwitterionic-aromatic skin sensor exhibits excellent mechanical properties (robust elasticity and large stretchability) and high-sensitive pressure detection (including a gentle finger touch, small water droplets, and vocal cord vibration). More importantly, aromatic motives in phenylboronic acid segments endow the skin with glucose-responsive property. This skin sensor not only shows great potential in wearable e-skins, but also possesses a promising property for the tissue-interfaced and implantable continuous-glucose-monitor biosensors such as smart wound dressing with a high demand of biocompatibility.

Understanding functional group and assembly dynamics in temperature responsive systems leads to design principles for enzyme responsive assemblies

Understanding the molecular rules behind the dynamics of supramolecular assemblies is fundamentally important for the rational design of responsive assemblies with tunable properties. Herein, we report that the dynamics of temperature-sensitive supramolecular assemblies is not only affected by the dehydration of oligoethylene glycol (OEG) motifs, but also by the thermally-promoted molecular motions. These counteracting features set up a dynamics transition point (DTP) that can be modulated with subtle variations in a small hydrophobic patch on the hydrophilic face of the amphiphilic assembly. Understanding the structural factors that control the dynamics of the assemblies leads to rational design of enzyme-responsive assemblies with tunable temperature responsive profiles.

Infrared Thin Film Detectors Based on Thermoresponsive Microgels with Linear Shrinkage Behavior and Gold Nanorods

To overcome the drawbacks of existing infrared detectors, infrared thin film detectors based on microgels and gold nanorods (Au NRs) are investigated. The microgels with a linear shrinkage of the hydrodynamic diameter between 10 and 55 °C are copolymerized by monomers di(ethylene glycol) methyl ether methacrylate, oligo(ethylene glycol) methyl ether methacrylate, and acrylic acid with a molar ratio of 1:1:1. Homogenous thin films are obtained by spin coating from an aqueous solution on silicon substrates. Upon heating in a water vapor atmosphere, the film thickness of the hybrid films linearly decreases. Heat generation from a plasmon resonance enhanced absorption of the infrared radiation by the Au NRs triggers a linear shrinkage in the hybrid microgel-Au NR films as well. A linear correlation between the film thickness and the applied infrared power density is observed. The sensitivity is enhanced by a slight increase in the amount of Au NRs in the films. Infrared detectors are constructed from the hybrid microgel-Au NR films by adding two electrodes via deposition of two silver layers at the film ends. By monitoring the ohmic resistance, the intensity of the incident infrared light can be obtained. The detectors not only possess a good reversibility and fast response rate but also show a high stability after the resistance measurements. Compared with the traditional infrared detectors, the infrared thin film detectors based on microgels are sensitivity adjustable. Thus, they can be promising candidates for replacing expensive inorganic infrared detectors in areas of daily life applications.

Thermoresponsive Diblock Copolymer Films with a Linear Shrinkage Behavior and Its Potential Application in Temperature Sensors

The linear shrinkage behavior in thermoresponsive diblock copolymer films and its potential application in temperature sensors are investigated. The copolymer is composed of two thermoresponsive blocks with different transition temperatures (TTs): di(ethylene glycol) methyl ether methacrylate (MEO₂MA; TT₁ = 25 °C) and poly(ethylene glycol) methyl ether methacrylate (OEGMA₃₀₀; TT₂ = 60 °C) with a molar ratio of 1:1. Aqueous solutions of PMEO₂MA-b-POEGMA₃₀₀ show a three-stage transition upon heating as seen with optical transmittance and small-angle X-ray scattering: dissolution (T < TT₁), self-assembled micelles with core-shell structure (TT₁ < T < TT₂), and aggregation of collapsed micelles (T > TT₂). Due to the restrictions in the polymer chain arrangement introduced by the solid Si substrate, spin-coated PMEO₂MA-b-POEGMA₃₀₀ films exhibit an entirely different internal structure and transition behavior. Neutron reflectivity shows the absence of an ordered structure normal to the Si substrate in as-prepared PMEO₂MA-b-POEGMA₃₀₀ films. After exposure to D₂O vapor for 3 h and then increasing the temperature above its TT₁ and TT₂, the ordered structure is still not observed. Only a D₂O enrichment layer is formed close to the hydrophilic Si substrate. Such PMEO₂MA-b-POEGMA₃₀₀ films show a linear shrinkage between TT₁ and TT₂ in a D₂O vapor atmosphere. This special behavior can be attributed to the synergistic effect between the restrained collapse of the PMEO₂MA blocks by the still swollen POEGMA₃₀₀ blocks and the impedance of chain arrangement by the Si substrate. Based on this unique behavior, spin-coated PMEO₂MA-b-POEGMA₃₀₀ films are further prepared into a temperature sensor by implementing Ag electrodes. Its resistance decreases linearly with temperature between TT₁ and TT₂.

Dual-responsive nanogels based on oligo(ethylene glycol) methacrylates and acidic co-monomers

Ethylene glycol-based nanogels (NGs) have demonstrated their potential for the development of next-generation formulations for biomedical applications due to their interesting properties. In this work, monodispersed NGs based on oligo(ethylene glycol) methacrylates (OEG) were synthesized through free radical precipitation/dispersion polymerization assisted by ultrasonication. Di(ethylene glycol)methyl ether methacrylate (DEGMA) and oligo(ethylene glycol) methacrylate (OEGMA; Mn 475 g mol-1) were used as the main monomers, acrylic acid (AA) or itaconic acid (IA) as co-monomers (OEG-co-AA and OEG-co-IA, respectively) and tetraethylene glycol dimethacrylate (TEGDMA) as crosslinker. The physicochemical properties of OEG-co-AA and OEG-co-IA NGs were studied including hydrodynamic diameter, poly-dispersity index, zeta potential and pH/temperature responsiveness. Samples with 4 mol% of both AA and IA showed nanometric sizes. Regarding their thermo-responsiveness, unexpected differences between NGs with AA or with IA were observed. Besides, NGs did not impair the cell viability of a breast tumour cell line even when high concentrations were added to the culture medium. The properties of the synthetized NGs showed that either NGs with 4% AA or with 4% IA are outstanding candidates for biomedical applications.

Hybrid Microgels for Catalytic and Photocatalytic Removal of Nitroarenes and Organic Dyes From Aqueous Medium: A Review

Polymer microgels loaded with inorganic nanoparticles have gained much attention as catalytic systems for reduction of toxic chemicals. Enhanced catalytic properties of hybrid microgels are related to the stimuli responsive nature of microgels and extraordinary stability of nanoparticles within network of polymer microgels. Catalytic properties of hybrid microgels can be tuned very easily by slight variation in environmental conditions. Herein we have reviewed catalytic reduction of toxic chemicals such as nitroarenes and organic dyes in the presence of appropriate hybrid microgel catalytic systems under different operating conditions of reaction. Recent advancements in catalytic behavior of hybrid microgels with special emphasis on their ability to catalytically degrade various toxic chemicals has been presented in this review.

Linear Control of Moisture Permeability and Anti-adhesion of Bacteria in a Broad Temperature Region Realized by Cross-Linking Thermoresponsive Microgels onto Cotton Fabrics

Linear control of moisture permeability and anti-adhesion of bacteria in a broad temperature region are realized by cross-linking thermoresponsive microgels onto cotton fabrics. The microgels are copolymerized by monomers di(ethylene glycol) methyl ether methacrylate (MEO₂MA), (ethylene glycol) methyl ether methacrylate (OEGMA₃₀₀), and ethylene glycol methacrylate (EGMA) with a molar ratio of 10:10:1. Transition temperatures of PMEO₂MA and POEGMA₃₀₀ are 25 and 60 °C, respectively. Due to the compression of already collapsed PMEO₂MA to still swollen POEGMA₃₀₀, the microgels present a linear shrinkage in a broad temperature region (20-70 °C). Additionally, the contact angle of the microgels stays below 60° even if the temperature is increased to 50 °C, illustrating the reserved surface hydrophilicity. The obtained microgels are cross-linked onto cotton fabrics by 1,2,3,4-butanetetracarboxylic (BTCA). The weight gain ratios (WGRs) are 15% and 30%. The moisture permeability shows an excellent linear increase between 20 and 50 °C when the WGR is 30%, which is attributed to the linear shrinkage of the cross-linked microgels upon heating. Because the moisture permeability is related to the fabric comfort, a linear control of comfort is obtained. In addition, the cross-linked cotton fabrics can realize 96.5% bacterial anti-adhesion at 30 °C as the surface remains hydrophilic. On the basis of these two unique properties, the realized cotton fabrics cross-linked with microgels are promising for application as smart textiles for wound addressing.

Volume Phase Transition Mechanism of Poly[di(ethylene glycol)ethyl ether acrylate]-Based Microgels Involving a Thermosensitive Poly(ionic liquid)

The microdynamic volume phase transition mechanism of poly[di(ethylene glycol)ethyl ether acrylate] (PDEGA)-based microgels with newly developed thermoresponsive polyionic liquid (PIL) (poly(tetrabutylphosphonium styrenesulfonate) P[P_4,4,4,4][SS]) moieties was studied by applying temperature-variable Fourier transform infrared (FTIR) spectroscopy in combination with two-dimensional correlation spectroscopy (2Dcos) and the perturbation correlation moving window (PCMW) technique. It can be found that the content of hydrophilic PIL moieties plays a significant role in the thermally induced phase transition behavior of microgel systems; namely, the microgels containing fewer PIL moieties present a sharp transition behavior and a gel-like state (10%, w/v) in water whereas the microgels with more PIL moieties undergo a slightly broad phase transition process and a flowable solution state. Herein, the C═O···D₂O-PIL hydrogen bonds as the interaction between PDEGA and P[P_4,4,4,4][SS] moieties result in a complete dehydration process for the microgels with fewer PIL moieties and the dehydrated behavior of SO₃^- groups acts as the driving force during the phase transition. As for the microgels with more PIL moieties, the whole transition process is dominated by the hydrophobic interaction of C-H groups. Even though the intermolecular hydrogen bonds (C═O···D₂O-PIL) appear as well, the more remarkable effect of the Coulombic repulsive force of PIL restrains the water molecules from breaking away, thus causing a gradual and incomplete dehydration process during heating.