In Situ Synthesis of Coil–Coil Diblock Copolymer Nanotubes and Tubular Ag/Polymer Nanocomposites by RAFT Dispersion Polymerization in Poly(ethylene glycol)

Exploiting Seeded RAFT Polymerization for the Preparation of Graft Copolymer Nanoparticles

Although seeded reversible addition-fragmentation chain transfer (RAFT) polymerization is explored as a unique method for the preparation of block copolymer nanoparticles with diverse structures, the preparation of nonlinear polymer nanoparticles by seeded RAFT polymerization is rarely reported. Herein, linear block copolymer nanoparticles are first prepared by RAFT dispersion copolymerization of benzyl methacrylate (BzMA) and 2-(2-(n-butyltrithiocarbonate)propionate)ethyl methacrylate (BTPEMA) with different [BzMA]/[BTPEMA] ratios, and employed as seeds for seeded RAFT polymerization of isobornyl acrylate (IBOA) to prepare graft copolymer nanoparticles with different numbers of PIBOA side chains. Comparing with linear triblock copolymers with the same chemical composition, the graft copolymers can promote the formation of higher-order morphologies (e.g., vesicles) under seeded RAFT polymerization conditions. Effects of reaction parameters on the morphology of graft copolymer nanoparticles are investigated in detail, and two morphological phase diagrams are constructed. It is expected that this study will not only expand the scope of seeded RAFT polymerization but also offer new opportunities for the preparation of unique polymer nanoparticles.

Seeded RAFT Polymerization-Induced Self-assembly: Recent Advances and Future Opportunities

Over the past decade, polymerization-induced self-assembly (PISA) has fully proved its versatility for scale-up production of block copolymer nanoparticles with tunable sizes and morphologies; yet, there are still some limitations. Recently, seeded PISA approaches combing PISA with heterogeneous seeded polymerizations have been greatly explored and are expected to overcome the limitations of traditional PISA. In this review, recent advances in seeded PISA that have expanded new horizons for PISA are highlighted including i) general considerations for seeded PISA (e.g., kinetics, the preparation of seeds, the selection of monomers), ii) morphological evolution induced by seeded PISA (e.g., from corona-shell-core nanoparticles to vesicles, vesicles-to-toroid, disassembly of vesicles into nanospheres), and iii) various well-defined nanoparticles with hierarchical and sophisticated morphologies (e.g., multicompartment micelles, porous vesicles, framboidal vesicles, AXn -type colloidal molecules). Finally, new insights into seeded PISA and future perspectives are proposed.

Polymerization-Induced Self-Assembly: An Emerging Tool for Generating Polymer-Based Biohybrid Nanostructures

The combination of biomolecules and synthetic polymers provides an easy access to utilize advantages from both the synthetic world and nature. This is not only important for the development of novel innovative materials, but also promotes the application of biomolecules in various fields including medicine, catalysis, and water treatment, etc. Due to the rapid progress in synthesis strategies for polymer nanomaterials and deepened understanding of biomolecules' structures and functions, the construction of advanced polymer-based biohybrid nanostructures (PBBNs) becomes prospective and attainable. Polymerization-induced self-assembly (PISA), as an efficient and versatile technique in obtaining polymeric nano-objects at high concentrations, has demonstrated to be an attractive alternative to existing self-assembly procedures. Those advantages induce the focus on the fabrication of PBBNs via the PISA technique. In this review, current preparation strategies are illustrated based on the PISA technique for achieving various PBBNs, including grafting-from and grafting-through methods, as well as encapsulation of biomolecules during and subsequent to the PISA process. Finally, advantages and drawbacks are discussed in the fabrication of PBBNs via the PISA technique and obstacles are identified that need to be overcome to enable commercial application.

Recent trends and advances in polyindole-based nanocomposites as potential antimicrobial agents: a mini review

Infections caused by multi-drug resistant microbes are a big challenge to the medical field and it necessitates the need for new biomedical agents that can act as potential candidates against these pathogens. Several polyindole based nanocomposites were found to exhibit the ability to release reactive oxygen species (ROS) and hence they show excellent antimicrobial properties. The features of polyindole can be fine-tuned to make them potential alternatives to antibiotics and antifungal medicines. This review clearly portrays the antimicrobial properties of polyindole based nanocomposites, reported so far for biomedical applications. This review will give a clear insight into the scope and possibilities for further research on the biomedical applications of polyindole based nanocomposites.

Organic–inorganic hybrid nanomaterials prepared via polymerization-induced self-assembly: recent developments and future opportunities

This review highlights recent developments in the preparation of organic–inorganic hybrid nanomaterials via polymerization-induced self-assembly.

Expanding the Scope of Polymerization-Induced Self-Assembly: Recent Advances and New Horizons

Over the past decade or so, polymerization-induced self-assembly (PISA) has become a versatile method for rational preparation of concentrated block copolymer nanoparticles with a diverse set of morphologies. Much of the PISA literature has focused on the preparation of well-defined linear block copolymers by using linear macromolecular chain transfer agents (macro-CTAs) with high chain transfer constants. In this review, a recent process is highlighted from an unusual angle that has expanded the scope of PISA including i) synthesis of block copolymers with nonlinear architectures (e.g., star block copolymer, branched block copolymer) by PISA, ii) in situ synthesis of blends of polymers by PISA, and iii) utilization of macro-CTAs with low chain transfer constants in PISA. By highlighting these important examples, new insights into the research of PISA and future impact these methods will have on polymer and colloid synthesis are provided.

How the Reactive End Group of Macro-RAFT Agent Affects RAFT-Mediated Emulsion Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly via reversible addition-fragmentation chain transfer (RAFT)-mediated emulsion polymerization is an emerging method in which macro-RAFT agents are chain extended with hydrophobic monomers in water to form block copolymer nano-objects. However, almost all RAFT-mediated emulsion polymerizations are limited to AB diblock copolymers by using monofunctional macro-RAFT agents with non-reactive end groups. In this study, the first investigation on how the reactive end group of macro-RAFT agent affects RAFT-mediated emulsion polymerization is reported. Three macro-RAFT agents with different end groups are synthesized and employed in RAFT-mediated emulsion polymerization. Effects of end groups on morphologies of block copolymer nano-objects and polymerization process are studied. Block copolymer nano-objects prepared by using an asymmetric difunctional macro-RAFT agent can be functionalized by further chain extension on the surface. It is expected that the current study will not only expand the scope of RAFT-mediated emulsion polymerization, but also provide a novel strategy to prepare functional polymer nanoparticles.

One-Pot Synthesis of Cross-linked Block Copolymer Nanowires via Polymerization-Induced Hierarchical Self-Assembly and Photodimerization

Block copolymer (BCP) nanowires are crucially important in diversified fields. However, their applications typically suffer from a tedious fabrication process, heterogeneous morphology, and degradation. Herein, we propose a facile and robust approach to synthesize stilbene-containing BCP nanowires in homogeneous morphology with high stability at high solid content (5%-20% w/w) in one pot. It is realized by the polymerization-induced hierarchical self-assembly and subsequent photodimerization cross-linking under UV irradiation of stilbene mesogens in the core-forming block in the later stage of polymerization. Because of the strong liquid crystalline ordering and photodimerization of stilbene, the cross-linked nanowires can be obtained over a broad BCP composition, which show robust morphological stability when exposed to solvent dissolution tests and water dispersion stability tests. This efficient approach to stabilized nanowires with homogeneous morphology via in situ cross-linking would be useful in various fields, such as nanomedicine and Pickering emulsifiers.

CO2-Responsive Nano-Objects with Assembly-Related Aggregation-Induced Emission and Tunable Morphologies

CO₂-responsive polymeric nano-objects with assembly-related aggregation-induced emission (AIE) are obtained via polymerization-induced self-assembly (PISA) of 2-(dimethylamino)ethyl methacrylate (DMAEMA), 2-(4-formylphenoxy)ethyl methacrylate (MAEBA), and 4-(1,2,2-triphenylvinyl)phenyl methacrylate (TPEMA). These nano-objects exhibit, depending on the feed of MAEBA, a morphology evolution process from spherical micelles to vesicles. Due to the presence of DMAEMA units, CO₂ promotes morphology transformation of the nano-objects from spheres to a mixture of "jellyfish" and vesicles and vesicles to complex vesicles. Moreover, TPEMA endows the AIE feature to these nano-objects, offering a strategy to monitor the morphology evolution process in real time. Thus, this approach is significant for exploring the assembly mechanism of copolymer in polymerization-induced self-assembly and designing multistimuli-responsive polymeric nanomaterials with tunable morphologies and sizes.

Polymerization-Induced Polymersome Fusion

The dynamic interactions of membranes, particularly their fusion and fission, are critical for the transmission of chemical information between cells. Fusion is primarily driven by membrane tension built up through membrane deformation. For artificial polymersomes, fusion is commonly induced via the external application of a force field. Herein, fusion-promoted development of anisotropic tubular polymersomes (tubesomes) was achieved in the absence of an external force by exploiting the unique features of aqueous ring-opening metathesis polymerization-induced self-assembly (ROMPISA). The out-of-equilibrium tubesome morphology was found to arise spontaneously during polymerization, and the composition of each tubesome sample (purity and length distribution) could be manipulated simply by targeting different core-block degrees of polymerization (DPs). The evolution of tubesomes was shown to occur via fusion of "monomeric" spherical polymersomes, evidenced most notably by a step-growth-like relationship between the fraction of tubular to spherical nano-objects and the average number of fused particles per tubesome (analogous to monomer conversion and DP, respectively). Fusion was also confirmed by Förster resonance energy transfer (FRET) studies to show membrane blending and confocal microscopy imaging to show mixing of the polymersome lumens. We term this unique phenomenon polymerization-induced polymersome fusion, which operates via the buildup of membrane tension exerted by the growing polymer chains. Given the growing body of evidence demonstrating the importance of nanoparticle shape on biological activity, our methodology provides a facile route to reproducibly obtain samples containing mixtures of spherical and tubular polymersomes, or pure samples of tubesomes, of programmed length. Moreover, the capability to mix the interior aqueous compartments of polymersomes during polymerization-induced fusion also presents opportunities for its application in catalysis, small molecule trafficking, and drug delivery.

100th Anniversary of Macromolecular Science Viewpoint: Heterogenous Reversible Deactivation Radical Polymerization at Room Temperature. Recent Advances and Future Opportunities

Heterogenous reversible deactivation radical polymerization (RDRP) has become an important method for the preparation of a diverse set of well-defined polymer materials in dispersed systems. Conducting heterogeneous RDRP at room temperature seems to be a minor adjustment in polymerization technique but this will lead to a great opportunity for functional polymer synthesis, developing of interesting heterogeneous RDRP systems, and better mechanistic insights into heterogeneous RDRP. In this Viewpoint, we highlight some recent advances of room-temperature heterogeneous RDRP that are challenging to achieve via traditional thermally initiated heterogeneous RDRP. We hope that this Viewpoint can provide some inspiration for both experts in this field and new comers, as well as nonexperts who are interested in preparing their own polymer materials by conducting room-temperature heterogeneous RDRP.

Structural Difference in Macro-RAFT Agents Redirects Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) has served as a versatile platform for the large-scale preparation of well-defined block copolymer nano-objects. It appears to be "common sense" that block copolymers with narrow molecular weight distributions are inevitable. In this study, we have conducted the direct comparison of reversible addition-fragmentation transfer (RAFT)-mediated PISA of 2-hydroxypropyl methacrylate (HPMA) using polymethacrylate- and polyacrylate-based macro-RAFT agents. Taking advantage of the poor RAFT controllability of polyacrylate-based macro-RAFT agents with respect to HPMA, uniform submicron-sized polymeric microspheres were prepared by photoinitiated RAFT-mediated PISA of HPMA. The diameter of polymeric microspheres can be precisely controlled by further chain-extension of PHPMA. Finally, uniform epoxy-functionalized multicompartment block copolymer particles (MBCPs) were prepared by a two-step photoinitiated RAFT-mediated PISA with poly(glycidyl methacrylate) (PGlyMA) as the third block. The performance of MBCPs as Pickering emulsifiers was evaluated in detail. This study not only expands the scope of RAFT-mediated PISA for preparing well-defined polymer particles but also provides important insights into the mechanism of RAFT-mediated PISA.

Blue Light-Initiated Alcoholic RAFT Dispersion Polymerization of Benzyl Methacrylate: A Detailed Study

Blue light-initiated alcoholic reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of benzyl methacrylate (BzMA) using bis (acyl) phosphane oxide (BAPO) as the photo-initiator is developed to prepare diblock copolymer nano-objects. High monomer conversion (95%) was achieved within 2 h of blue light irradiation in an isopropanol/water mixture. Effects of solvent, light intensity, and reaction temperature on the polymerization kinetics were evaluated. Finally, the effect of reaction temperature on the morphologies of diblock copolymer nano-objects was investigated and two morphological phase diagrams were constructed at 25 and 70 °C. Transmission electron microscopy (TEM) measurement confirmed that increasing the reaction temperature promoted the evolution of higher order morphology. We believe this study will provide more mechanistic insights into alcoholic RAFT dispersion polymerization for the creation of diblock copolymer nano-objects with well-defined structures.

Expanding the Scope of Polymerization-Induced Self-Assembly: Z-RAFT-Mediated Photoinitiated Dispersion Polymerization

In this communication, we developed the first well-controlled Z-RAFT (RAFT = reversible addition-fragmentation chain transfer) mediated polymerization-induced self-assembly (PISA) formulation based on photoinitiated RAFT dispersion polymerization of tert-butyl acrylate (tBA) in ethanol/water (60/40, w/w) at room temperature using a Z-type macromolecular chain transfer agent (macro-CTA). Polymerizations proceeded rapidly via the exposure of visible-light irradiation (405 nm, 0.45 mW/cm²) with high monomer conversion (>95%) being achieved within 1 h. A variety of polymer nano-objects (spheres, worms, and vesicles) with narrow molar mass distributions were prepared by this Z-RAFT mediated PISA formulation. Silver nanoparticles were loaded with the vesicles via in situ reduction, which can be used as a catalyst for the reduction of methylene blue (MB) in the presence of NaBH₄. Finally, gel permeation chromatography (GPC) analysis demonstrated that the corona block and the core-forming block could be cleaved by treating with excess initiator. This novel PISA formulation will greatly expand the scope of PISA and provide more mechanistic insights into the PISA research.

Synthesis of Low-Dimensional Polyion Complex Nanomaterials via Polymerization-Induced Electrostatic Self-Assembly

Nanostructured polyion complexes (PICs) are appealing in biomaterials applications. Yet, conventional assembly suffers from the weakness in scale-up and reproducibility. Only a few low-dimensional PICs are available to date. Herein we report an efficient and scalable strategy to prepare libraries of low-dimensional PICs. It involves a visible-light-mediated RAFT polymerization of ionic monomer in the presence of a polyion of the opposite charge at 5-50 % w/w total solids concentration in water at 25 °C, namely, polymerization-induced electrostatic self-assembly (PIESA). A Vesicle, multi-compartmental vesicle, and large-area unilamellar nanofilm can be achieved in water. A long nanowire and porous nanofilm can be prepared in methanol/water. An unusual unimolecular polyion complex (uPIC)-sphere-branch/network-film transition is reported. This green chemistry offers a general platform to prepare various low-dimensional PICs with high reproducibility on a commercially viable scale under eco-friendly conditions.