Colorless Partially Alicyclic Polyimides Based on Tröger’s Base Exhibiting Good Solubility and Dual Fluorescence/Phosphorescence Emission

Synthesis of High-Performance Colorless Polyimides with Asymmetric Diamine: Application in Flexible Electronic Devices

Colorless polyimides (CPIs) are widely used as high-performance materials in flexible electronic devices. From a molecular design standpoint, the industry continues to encounter challenges in developing CPIs with desired attributes, including exceptional optical transparency, excellent thermal stability, and enhanced mechanical strength. This study presents and validates a method for controlling 2-substituents, with a specific emphasis on examining how these substituents affect the thermal, mechanical, optical, and dielectric characteristics of CPIs. The presence of two CF3 groups on the same side of the diamine structure ensured the transmittance of the film. The charge transfer effect and the molecular distance are dynamically regulated by changing the 2-substituent (-OCH3/-CH3/H/F). The polyimide exhibited a well-maintained equilibrium between transparency and thermal stability, with a T500nm value ranging from 86.2 to 89.6% in the visible region, and a glass transition temperature (Tg) ranging from 358.6 to 376.0 °C. Additionally, the 6FDA-2-MTFMB compound, when combined with methyl, excels as a protective layer and base material, exhibiting excellent performance in various aspects. It has been verified as an appropriate option for flexible photodetectors and wearable piezoresistive sensors. In summary, this systematic investigation will provide a comprehensive and demonstrative methodology for developing CPIs that are capable of adapting to flexible electronic devices.

Recent Advances in Fluorescent Polyimides

Polyimide (PI) refers to a type of high-performance polymer containing imide rings in the main chain, which has been widely used in fields of aerospace, microelectronic and photonic devices, gas separation technology, and so on. However, traditional aromatic PIs are, in general, the inefficient fluorescence or even no fluorescence, due to the strong inter- and intramolecular charge transfer (CT) interactions causing unavoidable fluorescence quenching, which greatly restricts their applications as light-emitting functional layers in the fabrication of organic light-emitting diode (OLED) devices. As such, the development of fluorescent PIs with high fluorescence quantum efficiency for their application fields in the OLED is an important research direction in the near future. In this review, we provide a comprehensive overview of fluorescent PIs as well as the methods to improve the fluorescence quantum efficiency of PIs. It is anticipated that this review will serve as a valuable reference and offer guidance for the design and development of fluorescent PIs with high fluorescence quantum efficiency, ultimately fostering further progress in OLED research.

Ultralow Coefficient of Thermal Expansion and a High Colorless Transparent Polyimide Film Realized Through a Reinforced Hydrogen-Bond Network by In Situ Polymerization of Aromatic Polyamide in Colorless Polyimide

Colorless polyimides (CPIs) are a key substrate material for flexible organic light-emitting diode (OLED) displays and have attracted worldwide attention. Here, in this paper, the dispersion and interfacial interaction of aromatic polyamide (PA) in CPI (synthesized from 4,4'-(hexafluoroisopropylidene) diphthalic anhydride (6FDA) and 2,2'-bis(trifluoromethyl)benzidine (TFMB)) were significantly improved by in situ polymerization, and colorless transparent macromolecular polyimide composites (CPI-PAx) were successfully prepared by PA and CPI. By adjusting the ratio of PA to CPI, a high-performance engineering plastic with excellent film-forming properties was obtained. Molecular simulations confirmed the uniform distribution of PA in CPI and its interaction in polymers. In CPI-PAx, the CPI was locked by the PA chain, and numerous molecular chains were mutually entangled to form a hydrogen-bond network structure. Due to the strong interaction between the chains imparted by the hydrogen bonds of the PA, they do not slide under external forces and heating. In addition, the additive PA has excellent dimensional stability, thermal, and mechanical properties, and CPI has outstanding optical properties, so the synthesized CPI-PAx combines the comprehensive properties of PA and CPI. The CPI-PAx has excellent thermal and mechanical properties, with a thermal decomposition temperature of 499 °C, a glass transition temperature of 385 °C, a coefficient of thermal expansion of 0.8 ppm K-1, a tensile strength of 50.9 MPa, and an elastic modulus of 3.9 GPa. Particularly, CPI-PAx has a 90% transmittance in the visible region. These data prove that the strategy of combining PA and CPI by in situ polymerization is an effective method to circumvent the bottleneck of CPI in the current flexible window application, and this design strategy is universal.

Structural Designs of Transparent Polyimide Films with Low Dielectric Properties and Low Water Absorption: A Review

The rapid development of communication networks (5G and 6G) that rely on high-speed devices requiring fast and high-quality intra- and inter-terminal signal transmission media has led to a steady increase in the need for high-performance, low-dielectric-constant (D_k) (<2.5) materials. Consequently, low-dielectric polymeric materials, particularly polyimides (PIs), are very attractive materials that are capable of meeting the requirements of high-performance terminal devices that transmit broadband high-frequency signals. However, such a PI needs to be properly designed with appropriate properties, including a low D_k, low dielectric loss (D_f), and low water absorptivity. PI materials are broadly used in various fields owing to their superior property/processibility combinations. This review summarizes the structural designs of PIs with low D_k and D_f values, low water-absorbing capacity, and high optical transparency intended for communication applications. Furthermore, we characterize structure-property relationships for various PI types and finally propose structural modifications required to obtain useful values of the abovementioned parameters.

Sustainable Dielectric Films with Ultralow Permittivity from Soluble Fluorinated Polyimide

In the rapidly growing area of high-frequency communications, polyimide films with ultralow dielectric constant and dielectric loss, adequate insulating strength, and recyclability are in high demand. Using a synthesized soluble fluorinated polyimide, a series of recyclable porous dielectric films with varying porosities were fabricated in this study through nonsolvent-induced phase separation. By manipulating the mass ratio of the binary solvent used to dissolve the polyimide, the shape, size, and size distribution of the pores generated throughout the polyimide matrix can be accurately regulated. The porosity and average pore size of the as-prepared porous films were adjustable between 71% and 33% and between 9.31 and 1.00 μm, respectively, which resulted in a variable dielectric constant of 1.51–2.42 (100 kHz) and electrical breakdown strength of 30.3–119.7 kV/mm. The porous sPI film with a porosity rate of 48% displayed a low dielectric constant of 2.48 at 10 GHz. Coupled with their superior thermal stability, mechanical characteristics, and recyclability, these porous polyimide films are highly promising for constructing high-frequency microelectronic devices.

High temperature shape memory poly(amide-imide)s with strong mechanical robustness

Shape memory poly(amide-imide)s with strong mechanical robustness, outstanding heat resistance and low water uptake were fabricated.

Metal-Free Organic Luminophores that Exhibit Dual Fluorescence and Phosphorescence Emission at Room Temperature

Dual-fluorescent-phosphorescent compounds have attracted increasing attention in various fields, such as bio-imaging, data protection/encryption, ratiometric luminescence sensing, and white-light emission. Conventional dual-emissive compounds contain a phosphorescent organometallic complex of a precious metal, such as iridium or platinum. However, the use of precious metals in organic materials has several drawbacks. This Minireview focuses on precious-metal-free organic light-emitting materials that exhibit dual fluorescence and phosphorescence emission in the solid state at room temperature to produce bimodal steady-state emission spectra. The dual emitters presented herein are categorized into the following six compound classes: (1) difluoroboron diaroylmethanes, (2) diarylketones, (3) diarylsulfones, (4) triazines and pyrimidines, (5) fused phenazines, and (6) N-arylcarbazoles.

Synthesis and properties of colorless copolyimides derived from 4,4′-diaminodiphenyl ether-based diamines with different substituents

Highly transparent PI films with excellent mechanical strength, high heat-resistance and superior fracture toughness were fabricated.

Conformation-Dependent Phosphorescence of Galactose-Decorated Phosphors and Assembling-Induced Phosphorescence Enhancement

Amorphous organic room-temperature phosphorescent (RTP) materials are promising for their facile preparation and processability, while the conformation effects of phosphors at amorphous state are lack of study in comparison with the rigid effects due to the commonly irregular assembling and dispersal of phosphors in rigid systems. Herein, we report a series of phosphorescent molecules modified by polyhydroxy galactose, whose RTP emission at the amorphous state can be regulated by controlling the conformational distortion of the phosphorescent segments. Further, a strong RTP emission is facilely obtained by the co-assembling between polyhydroxy phosphors and polyhydroxy matrices (α-CD, β-CD, and chitosan). Owing to the rigid effect of the enhanced hydrogen bonding cross-linking, the highest RTP quantum yield reaches 19.4%; whereas, the RTP emissions of assemblies become conformation insensitive. The conflicting relationship between the conformation effect and rigid effect is attributed to the differences between aggregated single-component systems and dispersed assembling systems. Besides, the unique and different moisture responsiveness of the co-assembling samples is discovered and further applied in data encryption. The research expands the scope for designing amorphous pure organic RTP materials with supramolecular strategies and shows a modularized approach for assembling-enhanced phosphorescence.

Thermal degradation kinetics of transparent fluorinated poly(imide siloxane) copolymers

Fluorinated polyimide films are widely used in the field of flexible display because of their excellent optical transmittance. Based on previous studies, the adhesion to other substrates of fluorinated polyimide films have been improved by incorporating GAPD into the macromolecular chains, but their heat resistance is not yet very clear. In this study, thermal behaviors of fluorinated polyimide films (PIs) with and without GAPD were studied in N2 ambient and atmosphere by TG-DTG analysis under non-isothermal conditions. Activation energies (Eas) of PIs were calculated by Flynn-Wall-Ozawa method, Kissinger-Akahira-Sunose method and Kissinger method. In addition, mechanisms of thermal decomposition reaction were determined by Coats-Redfern method. By comparison, the Eas of PIs in the same atmosphere were similar and the thermal reaction mechanisms were essentially the same, indicating that adhesion of fluorinated polyimide can be improved by adding appropriate amount of GAPD, while the excellent optical permeability and heat resistance of fluorinated polyimide can be maintained, further expanding its application in flexible display and other fields.