Hydrophilic Stars, Amphiphilic Star Block Copolymers, and Miktoarm Stars with Degradable Polycarbonate Cores

Study on the Self-assembly Behavior of Polycaprolactone Star-Shaped Copolymers Based on Dissipative Particle Dynamics

In this study, the pH-responsive self-assembly behavior of polycaprolactone star-shaped block copolymers in aqueous solution was systematically investigated by dissipative particle dynamics. The changes in morphology during the self-assembly process were studied by adjusting the number of polymer star arms, the degree of ionization of the terminal carboxylic acid group, and the concentration of the polymer in the solution. The results show that during the self-assembly process, the star-shaped copolymers undergo a series of structural transformations from spherical micelles to worm-like micelles and then to lamellar micelles as ionization and solution concentration change. When the degree of ionization is high, the electrostatic repulsion is enhanced, resulting in the formation of smaller spherical micelles; in contrast, when the degree of ionization is low, the electrostatic repulsion is weakened, resulting in the formation of larger and more complex worm-like or lamellar structures. With an increase in the number of arms, the self-assembly behavior of the system gradually transitions from complex morphologies (such as lamellar micelles and branched worm-like micelles) to simple morphologies (such as linear worm-like micelles and spherical micelles). This study provides important theoretical references and practical guidance for revealing the regulatory mechanisms of carboxyl ionization, the number of polymer star arms, and solution concentration on the self-assembly behavior of amphiphilic block copolymers.

Miktoarm Star-polypept(o)ide-Based Polyion Complex Micelles for the Delivery of Large Nucleic Acids

Miktoarm star polymers exhibit a captivating range of physicochemical properties, setting them apart from their linear counterparts. This study devised a synthetic pathway to synthesize cationic miktoarm stars utilizing polypept(o)ides (PeptoMiktoStars), comprising 3 or 6 polysarcosine (pSar) arms (AB3×100, AB6×50, overall 300) for shielding and a cross-linkable poly(S-ethylsulfonyl-l-homocysteine) (pHcy(SO2Et)20) block and a poly(l-lysine) ((pLys)20) block for nucleic acid complexation. Precise control over the DPn and narrow molecular weight distributions (D̵ ≈ 1.2) were achieved for both structures. Both PeptoMiktoStars efficiently complexed mRNA and pDNA into polyion complex micelles (PICMs). AB6-PICMs provided modest (mRNA) to high (pDNA) stability against glutathione and heparin sulfate (HS), while even cross-linked AB3-PICMs were susceptible to HS. All PICMs delivered pDNA and mRNA into D1 cells (over 80%) and Jurkat T cells (over 50%) in vitro. Despite payload- and cell-dependency, AB3 showed overall higher transfection efficiency, while AB6 demonstrated better shielding and enhanced stability.

Organoboron-mediated polymerizations

The scientific community has witnessed extensive developments and applications of organoboron compounds as synthetic elements and metal-free catalysts for the construction of small molecules, macromolecules, and functional materials over the last two decades. This review highlights the achievements of organoboron-mediated polymerizations in the past several decades alongside the mechanisms underlying these transformations from the standpoint of the polymerization mode. Emphasis is placed on free radical polymerization, Lewis pair polymerization, ionic (cationic and anionic) polymerization, and polyhomologation. Herein, alkylborane/O2 initiating systems mediate the radical polymerization under ambient conditions in a controlled/living manner by careful optimization of the alkylborane structure or additives; when combined with Lewis bases, the selected organoboron compounds can mediate the Lewis pair polymerization of polar monomers; the bicomponent organoboron-based Lewis pairs and bifunctional organoboron-onium catalysts catalyze ring opening (co)polymerization of cyclic monomers (with heteroallenes, such as epoxides, CO2, CO, COS, CS2, episulfides, anhydrides, and isocyanates) with well-defined structures and high reactivities; and organoboranes initiate the polyhomologation of sulfur ylides and arsonium ylides providing functional polyethylene with different topologies. The topological structures of the produced polymers via these organoboron-mediated polymerizations are also presented in this review mainly including linear polymers, block copolymers, cyclic polymers, and graft polymers. We hope the summary and understanding of how organoboron compounds mediate polymerizations can inspire chemists to apply these principles in the design of more advanced organoboron compounds, which may be beneficial for the polymer chemistry community and organometallics/organocatalysis community.

Borinane-based organoboron catalysts for alternating copolymerization of CO2 with cyclic ethers: improved productivity and facile recovery

Organoboron catalysts including an ammonium salt separated by a few carbon–carbon bonds to a boron center were designed and synthesized. Borinane-based organoboron catalysts exhibited highest activity for the copolymerization of CO2 and epoxides.

Sequence Control from Mixtures: Switchable Polymerization Catalysis and Future Materials Applications

There is an ever-increasing demand for higher-performing polymeric materials counterbalanced by the need for sustainability throughout the life cycle. Copolymers comprising ester, carbonate, or ether linkages could fulfill some of this demand as their monomer-polymer chemistry is closer to equilibrium, facilitating (bio)degradation and recycling; many monomers are or could be sourced from renewables or waste. Here, an efficient and broadly applicable route to make such copolymers is discussed, a form of switchable polymerization catalysis which exploits a single catalyst, switched between different catalytic cycles, to prepare block sequence selective copolymers from monomer mixtures. This perspective presents the principles of this catalysis, catalyst design criteria, the selectivity and structural copolymer characterization tools, and the properties of the resulting copolymers. Uses as thermoplastic elastomers, toughened plastics, adhesives, and self-assembled nanostructures, and for programmed degradation, among others, are discussed. The state-of-the-art research into both catalysis and products, as well as future challenges and directions, are presented.

Effect of Molecular Architecture on Associating Behavior of Star-Like Amphiphilic Polymers Consisting of Plural Poly(ethylene oxide) and One Alkyl Chain

Associating behavior of star-like amphiphilic polymers consisting of two or three poly(ethylene oxide) (PEO) chains and one stearyl chain (C18) was investigated. Although the aggregation number (N_agg) of linear analogue of amphiphilic polymers monotonically decreased with increasing number-average molecular weight of PEO (M_n,PEO), the N_agg of micelles of star-like amphiphilic polymers with M_n,PEO = 550 g/mol was smaller than that with M_n,PEO = 750 g/mol, whereas that with M_n,PEO ≥ 750 g/mol showed general M_n,PEO dependence. Small-angle X-ray scattering analyses revealed that the occupied area of one PEO chain on the interface between hydrophobic core and corona layer in the micelles of star-like polymers was much narrower than that in the linear amphiphilic polymers. This result indica ted the PEO chains of star-like polymers partially took unfavorable conformation near the core-corona interface in polymer micelles. The effect of local conformation of PEO chains near the interface on the associating behavior became significant as M_n,PEO decreased. Therefore, in polymer micelles of star-like amphiphilic polymers containing PEO with M_n,PEO = 550 g/mol, the enlargement of occupied area of PEO on the core-corona interface should be caused to avoid the formation of unfavorable conformations of partial PEO chains, resulting in a decrease in N_aggs.

Miktoarm Star Polymers with Environment-Selective ROS/GSH Responsive Locations: From Modular Synthesis to Tuned Drug Release through Micellar Partial Corona Shedding and/or Core Disassembly

Branched architectures with asymmetric polymeric arms provide an advantageous platform for the construction of tailored nanocarriers for therapeutic interventions. Simple and adaptable synthetic methodologies to amphiphilic miktoarm star polymers have been developed in which spatial location of reactive oxygen species (ROS) and glutathione (GSH) responsive entities is articulated to be on the corona shell surface or inside the core. The design of such architectures is facilitated through versatile building blocks and selected combinations of ring-opening polymerization, Steglich esterification, and alkyne-azide click reactions. Soft nanoparticles from aqueous self-assembly of these stimuli responsive miktoarm stars have low critical micelle concentrations and high drug loading efficiencies. Partial corona shedding upon response to ROS is accompanied by an increase in drug release, without significant changes to overall micelle morphology. The location of the GSH responsive unit at the core leads to micelle disassembly and complete drug release. Curcumin loaded soft nanoparticles show higher efficiencies in preventing ROS generation in extracellular and cellular environments, and in ROS scavenging in human glioblastoma cells. The ease in synthetic elaboration and an understanding of structure-property relationships in stimuli responsive nanoparticles offer a facile venue for well-controlled drug delivery, based on the extra- and intracellular concentrations of ROS and GSH.