Carbon/Sulfur Aerogel with Adequate Mesoporous Channels as Robust Polysulfide Confinement Matrix for Highly Stable Lithium-Sulfur Battery

Tough Hydro-Aerogels with Cation Specificity Enabled Ultra-High Stability for Multifunctional Sensing and Quasi-Solid-State Electrolyte Applications

The anion-specific effects of the salting-in and salting-out phenomena are extensively observed in hydrogels, whereas the cation specificity of hydrogels is rarely reported. Herein, a multi-step strategy including borax pre-gelation, saline soaking, freeze-drying, and rehydrating is developed to fabricate polyvinyl alcohol gels with cation specificity, exhibiting the specific ordering of effects on the mechanical properties of gels as Ca2+ > Li+ > Mg2+ >> Fe3+ > Cu2+ >> Co2+ ≈ Ni2+ ≈ Zn2+. The multiple effects of the fabrication strategy, including the electrostatic repulsion among cations, skeleton support function of graphene oxide nanosheets, and water absorption and retention of ions, endow the gels with the dual characteristics of hydrogels and aerogels (i.e., hydro-aerogels). The hydro-aerogels prepared with the cationic salting-out effect display attractive pressure sensing performance with excellent stability over 90 days and enable continuous monitoring of ambient humidity in real-time and effective work in seawater to detect various parameters (e.g., depth, salinity, and temperature). The hydro-aerogels prepared without borax pretreatment or using the cationic salting-in effect can serve as quasi-solid-state electrolytes in supercapacitors, with 99.59% capacitance retention after 10 000 cycles. This study realizes cation specificity in hydrogels and designs multifunctional hydro-aerogels for promising applications in various fields.

Dual-functional mediators of high-entropy Prussian blue analogues for lithiophilicity and sulfiphilicity in Li-S batteries

Lithium-sulfur (Li-S) batteries are considered promising next-generation energy storage systems due to their high energy density (2600 W h kg-1) and cost-effectiveness. However, the shuttle effect of lithium polysulfides in sulfur cathodes and uncontrollable Li dendrite growth in Li metal anodes significantly impede the practical application of Li-S batteries. In this study, we address these challenges by employing a high-entropy Prussian blue analogue Mn0.4Co0.4Ni0.4Cu0.4Zn0.4[Fe(CN)6]2 (HE-PBA) composite containing multiple metal ions as a dual-functional mediator for Li-S batteries. Specifically, the HE-PBA composite provides abundant metal active sites that efficiently chemisorb lithium polysulfides (LiPSs) to facilitate fast redox conversion kinetics of LiPSs. In Li metal anodes, the exceptional lithiophilicity of the HE-PBA ensures a homogeneous Li ion flux, resulting in uniform Li deposition while mitigating the growth of Li dendrites. As a result, our work demonstrates outstanding long-term cycling performance with a decay rate of only 0.05% per cycle over 1000 cycles at 2.0 C. The HE-PBA@Cu/Li anode maintains a stable overpotential even after 600 h at 0.5 mA cm-2 under the total areal capacity of 1.0 mA h cm-2. This study showcases the application potential of the HE-PBA in Li-S batteries and encourages further exploration of prospective high-entropy materials used to engineer next-generation batteries.

Wet-Stable Lamellar Wood Sponge with High Elasticity and Fatigue Resistance Enabled by Chemical Cross-Linking

The excessive consumption of fossil-based plastics and the associated environmental concerns motivate the increasing exploitation of sustainable biomass-based materials for advanced applications. Natural wood-derived lamellar wood sponges via a top-down approach have recently attracted significant attention; however, the insufficient compressive fatigue resistance and lack of structural stability in water limit their wide applications. Here, we report a facile chemical cross-linking strategy to tackle these challenges, by which the cellulose fibrils in the lamellas are covalently bridged to enhance their connectivity. The cross-linked wood sponges demonstrate high compressibility up to 70% strain and exceptional compressive fatigue resistance (∼5% plastic deformation after 10,000 cycles at 50% strain). The interfibrillar cross-linking inhibits the swelling of cellulose fibrils and preserves the arch-shaped lamellas of the sponge in water, endowing the wood sponge with excellent wet stability. Such highly elastic and wet-stable lamellar wood sponges offer a sustainable alternative to synthetic polymer-based sponges used in diverse applications.

Graphene-based iron single-atom catalysts for electrocatalytic nitric oxide reduction: a first-principles study

The electrocatalytic NO reduction reaction (NORR) emerges as an intriguing strategy to convert harmful NO into valuable NH3. Due to their unique intrinsic properties, graphene-based Fe single-atom catalysts (SACs) have gained considerable attention in electrocatalysis, while their potential for NORR and the underlying mechanism remain to be explored. Herein, using constant-potential density functional theory calculations, we systematically investigated the electrocatalytic NORR on the graphene-based Fe SACs. By changing the local coordination environment of Fe single atoms, 26 systems were constructed. Theoretical results show that, among these systems, the Fe SAC coordinated with four pyrrole N atoms and that co-coordinated with three pyridine N atoms and one O atom exhibit excellent NORR activity with low limiting potentials of -0.26 and -0.33 V, respectively, as well as have high selectivity toward NH3 by inhibiting the formation of byproducts, especially under applied potential. Furthermore, electronic structure analyses indicate that NO molecules can be effectively adsorbed and activated via the electron "donation-backdonation" mechanism. In particular, the d-band center of the Fe SACs was identified as an efficient catalytic activity descriptor for NORR. Our work could stimulate and guide the experimental exploration of graphene-based Fe SACs for efficient NORR toward NH3 under ambient conditions.

Electrochemically Induced Ru/CoOOH Synergistic Catalyst as Bifunctional Electrode Materials for Alkaline Overall Water Splitting

Efficient and affordable price bifunctional electrocatalysts based on transition metal oxides for oxygen and hydrogen evolution reactions have a balanced efficiency, but it remains a significant challenge to control their activity and durability. Herein, a trace Ru (0.74 wt.%) decorated ultrathin CoOOH nanosheets (≈4 nm) supported on the surface of nickel foam (Ru/CoOOH@NF) is rationally designed via an electrochemically induced strategy to effectively drive the electrolysis of alkaline overall water splitting. The as-synthesized Ru/CoOOH@NF electrocatalysts integrate the advantages of a large number of different HER (Ru nanoclusters) and OER (CoOOH nanosheets) active sites as well as strong in-suit structure stability, thereby exhibiting exceptional catalytic activity. In particular, the ultra-low overpotential of the HER (36 mV) and the OER (264 mV) are implemented to achieve 10 mA cm-2 . Experimental and theoretical calculations also reveal that Ru/CoOOH@NF possesses high intrinsic conductivity, which facilitates electron release from H2 O and H-OH bond breakage and accelerates electron/mass transfer by regulating the charge distribution. This work provides a new avenue for the rational design of low-cost and high-activity bifunctional electrocatalysts for large-scale water-splitting technology and expects to help contribute to the creation of various hybrid electrocatalysts.

Full Potential Catalysis of Co0.4Ni1.6P-V/CNT with Phosphorus Vacancies for Li2S1-2 Deposition/Decomposition and S8/Li2Sn (3 ≤ n ≤ 8) Conversion in Li-S Batteries

The slow kinetics of polysulfide conversions hinders the commercial progress of Li-S batteries. The introduction of high-efficiency catalysts accelerates heterogeneous reactions and enhances the utilization of S. The full potential of the Co0.4Ni1.6P-V/CNT-modified separator catalyzes the all-process reactions of the S electrode and increases the rates and cycling lives of the batteries. The two-site synergistic effect of Co0.4Ni1.6P-V/CNT regulates the catalytic activity, and the phosphorus vacancies enrich the active sites. The higher electron density at the Co and Ni double sites increases chemisorption of the Co0.4Ni1.6P-V/CNT on Li2Sn (1 ≤ n ≤ 4), stretches and breaks the Li-S and Ni-S bonds during Li2S decomposition, and reduces the energy barrier for Li2S decomposition. The cyclic voltammograms of the asymmetric batteries demonstrated that Co0.4Ni1.6P-V/CNT also catalyzed the Li2Sn ⇌ S8 (3 ≤ n ≤ 8) reaction, realizing the full catalytic potential of the Li-S batteries. Increased Li+ diffusion/migration in the Co0.4Ni1.6P-V/CNT-modified separator ensured fast electrochemical reactions. The excellent catalytic effect of Co0.4Ni1.6P-V/CNT provided smaller polarization and superior rate performance, which led to high discharge specific capacities of 1511.9, 1172.6, 1006.0, 881.0, and 785.7 mA h g-1 at current densities of 0.1, 0.2, 0.5, 1, and 2 mA cm-2 with sulfur loadings of 7.98 mg cm-2, respectively. This approach involving simple crystal modulation and introduction of defects provides a new way to achieve the full catalytic potential of Li-S batteries.

An amorphous Ni-Fe catalyst for electrocatalytic dehydrogenation of alcohols to value-added chemicals

As for the hydrogen production process via electrocatalytic water splitting, the green and sustainable electro-oxidation of organic molecules at the anode is thermodynamically more favourable than the oxygen evolution reaction (OER). Here, we proposed for the first time to replace the OER process by the oxidation of N-Boc-4-piperidine methanol (BPM), via a parallel reaction, which finally leads to the green production of N-Boc-4-piperidine carboxaldehyde (BPC). The amorphous NiFeO(OH) nanospheres with rich valence states were adopted as the anode catalyst, with creation of more active sites. The gas chromatography results showed that nearly all the BPM converted to BPC after 15 h reaction. The electrochemical tests showed that the Faraday efficiency (FE) approaches nearly 100% when the charge transfer is approximately equal to the theoretical charge. This work reports a new process for the alcohol oxidation, providing a valuable green organic synthesis process.

Unlocking Liquid Sulfur Chemistry for Fast-Charging Lithium-Sulfur Batteries

A recent study of liquid sulfur produced in an electrochemical cell has prompted further investigation into regulating Li-S oxidation chemistry. In this research, we examined the liquid-to-solid sulfur transition dynamics by visually observing the electrochemical generation of sulfur on a graphene-based substrate. We investigated the charging of polysulfides at various current densities and discovered a quantitative correlation between the size and number density of liquid sulfur droplets and the applied current. However, the areal capacities exhibited less sensitivity. This observation offers valuable insights for designing fast-charging sulfur cathodes. By incorporating liquid sulfur into Li-S batteries with a high sulfur loading of 4.2 mg cm-2, the capacity retention can reach ∼100%, even when increasing the rate from 0.1 to 3 C. This study contributes to a better understanding of the kinetics involved in the liquid-solid sulfur growth in Li-S chemistry and presents viable strategies for optimizing fast-charging operations.

Vanadium as Auxiliary for Fe-V Dual-Atom Electrocatalyst in Lithium-Sulfur Batteries: "3D in 2D" Morphology Inducer and Coordination Structure Regulator

The undesirable shuttling behavior, the sluggish redox kinetics of liquid-solid transformation, and the large energy barrier for decomposition of Li2S have been the recognized problems impeding the practical application of lithium-sulfur batteries. Herein, inspired by the spectacular catalytic activity of the Fe/V center in bioenzyme for nitrogen/sulfur fixation, we design an integrated electrocatalyst comprising N-bridged Fe-V dual-atom active sites (Fe/V-N7) dispersed on ingenious "3D in 2D" carbon nanosheets (denoted as DAC), in which vanadium induces the laminar structure and regulates the coordination configuration of active centers simultaneously, realizing the redistribution of the 3d-orbital electrons of Fe centers. The high coupling/conjunction between Fe/V 3d electrons and S 2p electrons shows strong affinity and enhanced reactivity of DAC-Li2Sn (1 ≤ n ≤ 8) systems. Thus, DAC presents strengthened chemisorption ability toward polysulfides and significantly boosts bidirectional sulfur redox reaction kinetics, which have been evidenced theoretically and experimentally. Besides, the well-designed "3D in 2D" morphology of DAC enables uniform sulfur distribution, facilitated electron transfer, and abundant active sites exposure. Therefore, the assembled Li-S cells present outstanding cycling stability (637.3 mAh g-1 after 1000 cycles at 1 C) and high rate capability (711 mAh g-1 at 4 C) under high sulfur content (70 wt %).

Defect-rich Mo2S3 loaded wood-derived carbon acts as a spacer in lithium-sulfur batteries: forming a polysulfide capture net and promoting fast lithium flux

Due to the sluggish kinetics of sulfur conversion and the large volume change of the lithium anode, along with the formation of lithium dendrites, lithium-sulfur batteries (LSBs) usually exhibit severe capacity decay and poor cycle life. It is necessary to consider the factors associated with cathodes, separators and anodes in an integrated manner to solve the problems existing in LSBs. In this paper, a vertically aligned porous carbon decorated with transition metal sulfides was introduced between a cathode and an anode to comprehensively solve the problems of LSBs. Widely existing natural wood was used as the framework structure, and Mo₂S₃ with abundant sulfur vacancies was deposited into its channels. Theoretical calculations and experimental results have confirmed a low energy barrier for sulfur conversion and the presence of a strong electric field around the spacer, which benefits fast ion transportation. As a result, on employing the multifunctional spacer, LSB full cells delivered a high initial capacity and a long cycle life. This study provides a reference for reducing development cost, simplifying optimization steps and promoting the commercial application of LSBs.

MoS2/CoS heterostructures grown on carbon cloth as free-standing anodes for high-performance sodium-ion batteries

Heterostructure construction with mixed transition metal sulfides has been recognized as a promising strategy to boost the performance of sodium-ion batteries (SIBs). Herein, a carbon-decorated MoS₂/CoS heterostructure on carbon cloth (MoS₂/CoS@CC) as a free-standing anode for SIBs was synthesized via a facile growth-carbonization strategy. In the composite, the generated built-in electric field at MoS₂ and CoS heterointerfaces is beneficial for elevating the electron conductivity, thus expediting the Na-ion transport rate. Moreover, different redox potentials between MoS₂ and CoS can effectively mitigate the mechanical strain induced by repeated Na⁺ de-/intercalation, thus ensuring the structural integrity. In addition, the carbon skeleton derived from the carbonization of glucose can enhance the conductivity of the electrode and maintain the structural integrity. Consequently, the resulting MoS₂/CoS@CC electrode delivers a reversible capacity of 605 mA h g^-1 at 0.5 A g^-1 after 100 cycles, and prominent rate performance (366 mA h g^-1 at 8.0 A g^-1). Theoretical calculations also confirm that the establishment of a MoS₂/CoS heterojunction can powerfully promote the electron conductivity, thereby enhancing the Na-ion diffusion kinetics.

Coordinating Interface Polymerization with Micelle Mediated Assembly Towards Two-Dimensional Mesoporous Carbon/CoNi for Advanced Lithium-Sulfur Battery

Lithium-sulfur battery has attracted significant attention by virtues of their high theoretical energy density, natural abundance, and environmental friendliness. However, the notorious shuttle effect of polysulfides intermediates severely hinders its practical application. Herein, a novel 2D mesoporous N-doped carbon nanosheet with confined bimetallic CoNi nanoparticles sandwiched graphene (mNC-CoNi@rGO) is successfully fabricated through a coordinating interface polymerization and micelle mediated co-assembly strategy. mNC-CoNi@rGO serves as a robust host material that endows lithium-sulfur batteries with a high reversible capacity of 1115 mAh g^-1 at 0.2 C after 100 cycles, superior rate capability, and excellent cycling stability with 679.2 mAh g^-1 capacity retention over 700 cycles at 1 C. With sulfur contents of up to 5.0 mg cm^-2 , the area capacity remains to be 5.1 mAh cm^-2 after 100 cycles at 0.2 C. The remarkable performance is further resolved via a series of experimental characterizations combined with density functional theory calculations. These results reveal that the ordered mesoporous N-doped carbon-encapsulated graphene framework acts as the ion/electron transport highway with excellent electrical conductivity, while bimetallic CoNi nanoparticles enhance the polysulfides adsorption and catalytic conversion that simultaneously accelerate the multiphase sulfur/polysulfides/sulfides conversion and inhibit the polysulfides shuttle.

Regulating the d-band electrons of the Fe-N-C single-atom catalyst for high-efficiency CO2 electroreduction by electron-donating S-doping

Developing highly efficient electrocatalysts is crucially significant for the application of advanced energy conversion. The Fe-N-C single-atom catalyst is promising for CO₂ electroreduction reaction (CO₂RR) but suffers from insufficient intrinsic activity and inferior conductivity, which could be addressed by redistributing the electron density via heteroatom doping. Herein, we synthesized S-doped Fe-N-C (Fe-SN-C) as an advanced electrocatalyst for CO₂RR using a simple trapping-pyrolysis strategy. Density functional theory calculations and experimental results indicate that S doping increases the d-band electrons and conductivity of Fe-SN-C by electron donating, and thus boosts *CO desorption during the CO₂RR process and suppresses the competing hydrogen evolution reaction. Consequently, Fe-SN-C exhibits the maximum CO faradaic efficiency of 93% at -0.5 V and the highest partial current density of 10.1 mA cm^-2 at -0.8 V for 2e^- CO₂RR. This finding provides a feasible and controllable method to achieve advanced electrocatalysts for efficient energy conversion.

Supramolecular Framework Constructed by Dendritic Nanopolymer for Stable Flexible Perovskite Resistive Random-Access Memory

The 3D supramolecular framework (3D-SF) is constructed in this work through the hydrogen bond assisted self-assembly of spherical dendritic nanopolymer to regulate the flexibility, stability, and resistive switching (RS) performance of perovskite resistive random-access memory (RRAM). Herein, the 3D-SF network acts as the perovskite crystallization template to regulate the perovskite crystallization process due to its coordination interaction of functional groups with the perovskite grains, presenting the uniform, pinhole-free, and compact perovskite morphology for stable flexible RRAM. The 3D-SF network in situ stays at the perovskite intergranular boundaries to crosslink the perovskite grains. The RS performance of 3D-SF-modified perovskite RRAM device is evidently improved to the ON/OFF ratio of 10⁵ , the cycle number of 500 times, and the data retention time of 10⁴ s. The 50-days exposure of unencapsulated RRAM device at ambient environment still makes the ON/OFF ratio to be kept at ≈10⁴ , indicating the potential of long-term stable multilevel storage in the high-density data storage. The bending action under different radius also does not change the RS performance due to the excellent bending-resistant ability of 3D-SF-modified perovskite film. This work explores a novel polymer additive strategy to construct the 3D supramolecular framework for stable flexible perovskite optoelectronic devices.

Enhanced in-plane thermal conductivity of polyimide-based composites via in situ interfacial modification of graphene

Interfacial thermal resistance is the main barrier restricting the heat dissipation of thermal management materials in electronic equipment. The interface structure formed by covalent bonding is an effective way to promote interfacial heat transfer. Herein, an integrated composite with multi-aspect covalent bonding beneficial for heat transmission is constructed by polyimide (PI) polymerization with maleimide modified graphene nanosheets (M@GNS). The interfacial structure with low thermal resistance built by covalent bonding and oriented graphene arrangement initiated by the coating process makes the in-plane thermal conductivity of the composite as high as 16.10 W m^-1 K^-1. Finite element simulation and 1000 bending tests are carried out to further verify the performance advantages of the integrated structure in the internal thermal diffusion and long-term use of the composite. M@GNS/PI with integrated structure provides extra heat transfer channels for heat dissipation, possibly providing an effective way to address the traditional thermal accumulation issue of electronic devices.

Integrated structure design and synthesis of a pitaya-like SnO2/N-doped carbon composite for high-rate lithium storage capability

Tin dioxide (SnO₂) with a high theoretical capacity of 1494 mA h g^-1 has great potential to break through the capacity limitation of the conventional graphite anode (372 mA h g^-1) in lithium-ion batteries. However, its practical application still faces several obstacles such as high volumetric expansion and poor electrical conductivity. To solve these problems, innovative design and synthesis of SnO₂-based nanocomposite structures are necessary. Herein, we demonstrate an integrated design of a hierarchical pitaya-like P-SnO₂/C@NC core-shell nanostructure which includes the core of SnO₂ nanoparticles (∼4-12 nm) uniformly embedded in the porous carbon sphere and the shell of a continuous nitrogen-doped carbon (NC) layer. Specifically, during repetitive lithiation and delithiation processes, the ultrasmall SnO₂ nanoparticles reduce the internal stress greatly, the porous carbon matrix provides buffer space for a large volume change, and the N-doped carbon shell further guarantees the whole structure unit sufficient electrical conductivity and structural stability. Consequently, the resultant battery exhibits a reversible capacity of 936.8 mA h g^-1 after 100 cycles at 100 mA g^-1 and even an average capacity of 460.0 mA h g^-1 at a high current density of 3.2 A g^-1. The excellent electrochemical performance of pitaya-like SnO₂/C@NC proves the efficacy of this structure design and thus provides significant reference for the construction of other electrode materials in rechargeable alkali metal ion batteries.

Effective Solution toward the Issues of Zn-Based Anodes for Advanced Alkaline Ni-Zn Batteries

Alkaline nickel-zinc (Ni-Zn) batteries, as traditional rechargeable aqueous batteries, possess an obvious advantage in terms of energy density, but their development has been hindered by the anode-concerned problems, Zn dendrites, self-corrosion, passivation, deformation, and hydrogen evolution reaction (HER). Herein, to solve these problems, a dual protective strategy is proposed toward the anode using ZnO as an initial active material, including a C coating on ZnO (ZnO@C) and a thin poly(vinyl alcohol) (PVA) layer coating on the electrode (ZnO@C-PVA). In a three-electrode configuration, the reversible capacity can reach 600 mAh g^-1 for the ZnO@C-PVA. Using excessive commercial Ni(OH)₂ as the cathode, the alkaline Ni-Zn cells exhibit good electrochemical performance: Discharge capacity can be as high as 640-650 mAh g^-1 at 4 A g^-1 with a Coulomb efficiency (CE) as high as 97-99% after activity, suggesting low self-corrosion and HER. Capacity retention is 97% after 1200 cycles, indicating rather good durability. The discharge capacity is even slightly increased with the increase of charge/discharge current density (≤8 A g^-1), implying good rate performance. Additionally, the discharge voltage can reach 1.8 V (midpoint value) at various current densities, reflecting the fast reaction kinetics of the anode. Most importantly, no Zn dendrites and passivation are observed after long-term cycling. The strategy proposed here can solve the anode-concerned problems effectively, exhibiting a high application prospect.

Prediction of boridenes as high-performance anodes for alkaline metal and alkaline Earth metal ion batteries

We conducted a comprehensive density functional theory investigation using the r²SCAN-rVV10 functional on the structural stability and electrochemical properties of boridenes for their use as anode materials in rechargeable alkaline (earth) metal-ion batteries (Li⁺, Na⁺, K⁺, Mg²⁺ and Ca²⁺). According to first-principles molecular dynamics simulations and reaction thermodynamic calculations, Mo_4/3B₂(OH)₂ and Mo_4/3B₂F₂ are unstable in the presence of alkaline (earth) metal ions due to the surface-conversion reactions between the surface terminations and adsorbates. Meanwhile, the bare Mo_4/3B₂ and Mo_4/3B₂O₂ monolayers not only can accommodate alkaline (earth) metal ions, but also form stable multi-layer adsorption structures for most of the studied metal ions (Li⁺, Na⁺, K⁺, Mg²⁺ and Ca²⁺). The predicted gravimetric capacities of the bare Mo_4/3B₂ monolayer (Mo_4/3B₂O₂) are 625.9 mA h g^-1 (357.3 mA h g^-1), 247.20 mA h g^-1 (392.1 mA h g^-1), 101.8 mA h g^-1 (206.4 mA h g^-1), 667.0 mA h g^-1, and 413.0 mA h g^-1 (485.4 mA h g^-1) for Li⁺, Na⁺, K⁺, Mg²⁺ and Ca²⁺ ions, respectively. The bare Mo_4/3B₂ exhibits lower onset charging open circuit voltages for alkaline (earth) metal ions than that of Mo_4/3B₂O₂. The diffusivities of the metal ions were revealed to be high on the boridene monolayer especially for the outer fully stable adsorption layers, where the migration energy barriers were found to be less than 0.10 eV. Similar to that of MXenes, the negative electron cloud (NEC) also plays a vital role in stabilizing the observed multi-layer adsorption structures for various metal ions on either the bare Mo_4/3B₂ or Mo_4/3B₂O₂ monolayer.

Understanding the Catalytic Kinetics of Polysulfide Redox Reactions on Transition Metal Compounds in Li-S Batteries

Because of their high energy density, low cost, and environmental friendliness, lithium-sulfur (Li-S) batteries are one of the potential candidates for the next-generation energy-storage devices. However, they have been troubled by sluggish reaction kinetics for the insoluble Li₂S product and capacity degradation because of the severe shuttle effect of polysulfides. These problems have been overcome by introducing transition metal compounds (TMCs) as catalysts into the interlayer of modified separator or sulfur host. This review first introduces the mechanism of sulfur redox reactions. The methods for studying TMC catalysts in Li-S batteries are provided. Then, the recent advances of TMCs (such as metal oxides, metal sulfides, metal selenides, metal nitrides, metal phosphides, metal carbides, metal borides, and heterostructures) as catalysts and some helpful design and modulation strategies in Li-S batteries are highlighted and summarized. At last, future opportunities toward TMC catalysts in Li-S batteries are presented.

Decoupling layer metal-organic frameworks via ligand regulation to achieve ultra-thin carbon nanosheets for oxygen reduction electrocatalysis

2D imidazole MOFs are considered to be ideal carbon precursors for oxygen reduction reactions owing to their adjustable ligand components and durable coordination mode. Due to the massive electron delocalization in the lamella, the conjugative effect among 2D MOF layers immensely restricts the exposure of catalytic sites after carbonization, which makes the decoupling layer extremely important on the premise of ensuring activity. Herein, atomic thickness ultra-thin zinc-imidazole MOF precursors were prepared through a bottom-up ligand regulated strategy to achieve the aim of lamellar decoupling. The introduction of heterologous ligands excites stable delocalized electrons, resulting in a decrease in the interlayer force of 2D zinc-imidazole MOF precursors. Subsequent salt template-supported ammonia pyrolysis assisted the MOF-derived carbon sheets to grow along the transverse direction and optimize pore size distribution as did the doping nitrogen type. The MOF-derived carbon sheets demonstrated increasing mesopores and fringe graphitic N which could significantly promote the mass transfer and electron transfer speed during the oxygen reduction reaction. In addition, the obtained ultra-thin carbon delivered an outstanding onset potential (0.98 V vs. RHE) and durability (retaining 91% of the initial current after 12000 s of operation), showing tremendous commercial prospects in sustainable energy.

Construction of three-dimensional cobalt sulfide/multi-heteroatom co-doped porous carbon as an efficient trifunctional electrocatalyst

Exploring cost-effective non-precious metal electrocatalysts is vital for the large-scale application of clean energy conversion devices (i.e., fuel cells, metal-air batteries and water electrolysers). Herein, we present the construction of a three-dimensional cobalt sulfide/multi-heteroatom co-doped carbon composite as a trifunctional electrocatalyst for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) through one-step sulfidation of zeolitic-imidazolate frameworks (ZIFs) using sulfur powder as a sulfur source. By virtue of the distinct periodic metal-nitrogen coordination structure and the abundant micropores within the ZIF precursor, sub-10 nm Co₉S₈ nanoparticles (NPs) are homogenously anchored on a Co, S and N multi-heteroatom co-doped carbon framework with a large specific surface area that exposes sufficient reactive sites for these electrocatalytic reactions. The optimized Co₉S₈/CoNSC exhibits outstanding ORR, OER and HER performance, comparable or even superior to those of commercial Pt/C and RuO₂. The small Co₉S₈ NPs and Co-N_x species embedded in the carbon matrix cooperatively catalyze the OER and ORR, while the HER catalysis is mainly contributed by Co₉S₈ NPs. Furthermore, the Co₉S₈/CoNSC shows outstanding anti-poisoning capability towards sulfur species during ORR catalysis with no obvious activity degradation observed in 0.1 M KOH containing 50 μM SO₃^2- species, significantly outperforming commercial Pt/C. The assembled rechargeable Zn-air battery using the Co₉S₈/CoNSC as a cathode shows a high power density (150 mW cm^-2) and the assembled water electrolyzer only requires 1.585 V at a current density of 10 mA cm^-2 when using this material as an anode and a cathode. This work provides an effective strategy to design and synthesize efficient, durable and anti-poisoning cobalt chalcogenide-based trifunctional electrocatalysts for the large-scale application of clean energy conversion devices.

A graphene oxide scaffold-encapsulated microcapsule for polysulfide-immobilized long life lithium-sulfur batteries

Engineering high-performance cathodes for high energy-density lithium-sulfur (Li-S) batteries is quite significant to achieve commercialization. Here, we develop a graphene oxide scaffold/sulfur composite-encapsulated microcapsule (GSM) for high-performance Li-S batteries, which is prepared through the co-flow focusing (CFF) approach. The GSM-based cathode displays a high capacity of 1004 mA h g^-1 at 0.2C after cycling 200 times, a long-term cycling stability after 1000 cycles at 2C, and a good rate-performance. At temperatures of -5 °C and 45 °C, the electrochemical performance is also excellent. The computational calculations based on density functional theory (DFT) verify the high adsorption energies of the microcapsules towards polysulfides, suppressing the shuttle effect efficiently. It is expected that the GSM system developed based on the CFF method here and its high electrochemical performance will enable it to be applicable for preparing many other emerging energy-storage materials and secondary batteries.

Unveiling the advantages of an ultrathin N-doped carbon shell on self-supported tungsten phosphide nanowire arrays for the hydrogen evolution reaction experimentally and theoretically

Packaging electrocatalysts with carbon shells offers an opportunity to develop stable and effective hydrogen evolution reaction (HER) materials. Here, an ultrathin N-doped carbon-coated self-supported WP nanowire array (WP@NC NA) hybrid has been synthesized. Owing to the encapsulation of the ultrathin N-doped carbon shell on the WP surface, the as-prepared WP@NC NA hybrid exhibits enhanced physicochemical stability, more active sites, and superior conductivity compared with WP NA without carbon coating. Besides, density functional theory calculations demonstrate that the carbon shell can optimize the hydrogen adsorption step in the acidic HER, and simultaneously facilitate water physical adsorption, water dissociation, and hydroxyl group desorption steps during the alkaline HER. These findings demonstrate the intrinsic mechanism of how a carbon shell promotes the acidic and alkaline HER kinetics, and provide scientific guidance for the packaging design of promising carbon-encapsulating self-supported electrocatalysts.

Self-Assembly of Hausmannite Mn3O4 Triangular Structures on Cocosin Protein Scaffolds for High Energy Density Symmetric Supercapacitor Application

Recent advances in using biological scaffolds for nanoparticle synthesis have proven to be useful for preparing various nanostructures with uniform shape and size. Proteins are significant scaffolds for generating various nanostructures partly because of the presence of many functional groups to recognize different chemistries. In this endeavor, cocosin protein, an 11S allergen, is prepared from coconut fruit and employed as a potential scaffold for synthesizing Mn₃O₄ materials. The interaction between protein and manganese ions is studied in detail through isothermal calorimetric titration. At increased scaffold availability, the Mn₃O₄ material adopts the exact hexamer structure of the cocosin protein. The electrochemical supercapacitive properties of the cocosin-Mn₃O₄ material are found to have a high specific capacitance of 751.3 F g^-1 at 1 A g^-1 with cyclic stability (92% of capacitance retention after 5000 CV cycles) in a three-electrode configuration. The Mn₃O₄//Mn₃O₄ symmetric supercapacitor device delivers a specific capacitance of 203.8 F g^-1 at 1 A g^-1 and an outstanding energy and power density of 91.7 W h kg^-1 and 899.5 W kg^-1, respectively. These results show that cocosin-Mn₃O₄ could be considered a suitable electrode for energy storage applications. Moreover, the cocosin protein to be utilized as a novel scaffold in protein-nanomaterial chemistry could be useful for protein-assisted inorganic nanostructure synthesis in the future.

Energy-Saving Synthesis of Functional CoS2/rGO Interlayer With Enhanced Conversion Kinetics for High-Performance Lithium-Sulfur Batteries

Lithium sulfur (Li-S) battery has exhibited great application potential in next-generation high-density secondary battery systems due to their excellent energy density and high specific capacity. However, the practical industrialization of Li-S battery is still affected by the low conductivity of sulfur and its discharge product (Li₂S₂/Li₂S), the shuttle effect of lithium polysulfide (Li₂S_n, 4 ≤ n ≤ 8) during charging/discharging process and so on. Here, cobalt disulfide/reduced graphene oxide (CoS₂/rGO) composites were easily and efficiently prepared through an energy-saving microwave-assisted hydrothermal method and employed as functional interlayer on commercial polypropylene separator to enhance the electrochemical performance of Li-S battery. As a physical barrier and second current collector, the porous conductive rGO can relieve the shuttle effect of polysulfides and ensure fast electron/ion transfer. Polar CoS₂ nanoparticles uniformly distributed on rGO provide strong chemical adsorption to capture polysulfides. Benefitting from the synergy of physical and chemical constraints on polysulfides, the Li-S battery with CoS₂/rGO functional separator exhibits enhanced conversion kinetics and excellent electrochemical performance with a high cycling initial capacity of 1,122.3 mAh g⁻¹ at 0.2 C, good rate capabilities with 583.9 mAh g⁻¹ at 2 C, and long-term cycle stability (decay rate of 0.08% per cycle at 0.5 C). This work provides an efficient and energy/time-saving microwave hydrothermal method for the synthesis of functional materials in stable Li-S battery.

N, S-doped graphene derived from graphene oxide and thiourea-formaldehyde resin for high stability lithium-sulfur batteries

Although lithium-sulfur (Li-S) batteries with a high theoretical energy density and low cost have attracted extensive research attention, their commercialization is still unsuccessful due to the poor cycle life caused by the dissolution of polysulfides. It is the key challenge to overcome polysulfide shuttling for achieving long-term cycling stability in Li-S batteries. Here we report a novel strategy for the synthesis of N, S-doped graphene with high nitrogen and sulfur contents via in situ self-assembly of graphene oxide and thiourea-formaldehyde resin and calcination. The N, S-doped graphene serves as a conductive agent and a chemosorbent for suppressing polysulfide shuttling and preventing the Li-metal from corrosion, leading to a high reversible capacity and superior cycling stability. The Li-S batteries with the N, S-doped graphene can achieve an excellent cycling life (622 mA h g^-1 after 500 cycles at 1C) and a slow capacity decay rate (0.049% per cycle over 500 cycles at 1C). The proposed strategy has the potential to enhance the high electrochemical properties of Li-S batteries.

From solid waste to a high-performance Li3.25Si anode: towards high initial Coulombic efficiency Li–Si alloy electrodes for Li-ion batteries

With solid wastes as precursors, Li3.25Si was fabricated as an anode, combining the advantages of low-cost and high initial Coulombic efficiency.

Monodispersed Copper Phosphide Nanocrystals in situ Grown into Nitrogen-doped Reduced Graphene Oxide Matrix and their Superior Performance as the Anode for Lithium-ion Batteries

A nanocomposite anode material consisting fully of monodispersed copper phosphide (Cu3P) nanocrystals in situ grown into three dimensional (3D) nitrogen-doped reduced graphene oxide (N-RGO) matrixes has been manufactured in the...

High-Index Faceted Nanocrystals as Highly Efficient Bifunctional Electrocatalysts for High-Performance Lithium-Sulfur Batteries

Precisely regulating of the surface structure of crystalline materials to improve their catalytic activity for lithium polysulfides is urgently needed for high-performance lithium-sulfur (Li-S) batteries. Herein, high-index faceted iron oxide (Fe₂O₃) nanocrystals anchored on reduced graphene oxide are developed as highly efficient bifunctional electrocatalysts, effectively improving the electrochemical performance of Li-S batteries. The theoretical and experimental results all indicate that high-index Fe₂O₃ crystal facets with abundant unsaturated coordinated Fe sites not only have strong adsorption capacity to anchor polysulfides but also have high catalytic activity to facilitate the redox transformation of polysulfides and reduce the decomposition energy barrier of Li₂S. The Li-S batteries with these bifunctional electrocatalysts exhibit high initial capacity of 1521 mAh g^-1 at 0.1 C and excellent cycling performance with a low capacity fading of 0.025% per cycle during 1600 cycles at 2 C. Even with a high sulfur loading of 9.41 mg cm^-2, a remarkable areal capacity of 7.61 mAh cm^-2 was maintained after 85 cycles. This work provides a new strategy to improve the catalytic activity of nanocrystals through the crystal facet engineering, deepening the comprehending of facet-dependent activity of catalysts in Li-S chemistry, affording a novel perspective for the design of advanced sulfur electrodes.

A novel free-standing metal organic frameworks-derived cobalt sulfide polyhedron array for shuttle effect suppressive lithium-sulfur batteries

Metal-organic-frameworks-derived nanostructures have received broad attention for secondary batteries. However, many strategies focus on the preparation of dispersive materials, which need complicated steps and some additives for making electrodes of batteries. Here, we develop a novel free-standing Co₉S₈polyhedron array derived from ZIF-67, which grows on a three-dimensional carbon cloth for lithium-sulfur (Li-S) battery. The polar Co₉S₈provides strong chemical binding to immobilize polysulfides, which enables efficiently suppressing of the shuttle effect. The free-standing S@Co₉S₈polyhedron array-based cathode exhibits ultrahigh capacity of 1079 mAh g^-1after cycling 100 times at 0.1 C, and long cycling life of 500 cycles at 1 C, recoverable rate-performance and good temperature tolerance. Furthermore, the adsorption energies towards polysulfides are investigated by using density functional theory calculations, which display a strong binding with polysulfides.

InOOH as an efficient bidirectional catalyst for accelerated polysulfides conversion to enable high-performance lithium-sulfur batteries

Lithium-sulfur (Li-S) batteries with the prominent advantages are greatly expected to be the attractive alternatives in the next-generation energy-storage systems. However, the practical success of Li-S batteries suffers from the shuttle effect and depressed redox kinetics of polysulfides. Herein, for the first time, InOOH nanoparticles are employed as a potent catalytic additive in sulfur electrode to overcome these issues. As demonstrated by the theoretical and experimental results, the strong interactions between the InOOH nanoparticles and sulfur species enable the effective adsorption of polysulfides. More significantly, InOOH nanoparticles not only effectively expedite the reduction of sulfur during the discharge process, but also dramatically accelerate the oxidation of Li₂S during the charge process, presenting the marvelous bidirectional catalytic effects. Benefited from these distinctive superiorities, the cells with InOOH nanoparticles harvest an excellent capacity retention of 69.5% over 500 cycles at 2C and a commendable discharge capacity of 891 mAh g^-1 under a high-sulfur loading of 5.0 mg cm^-2. The detailed investigations in this work provide a novel insight to ameliorate the Li-S electrochemistry by the bidirectional catalyst for high-performance Li-S batteries.

A template oriented one-dimensional Schiff-base polymer: towards flexible nitrogen-enriched carbonaceous electrodes with ultrahigh electrochemical capacity

Lithium-ion capacitors (LICs) have attracted much attention considering their efficient combination of high energy density and high-power density. However, to meet the increasing requirements of energy storage devices and the flexible portable electronic equipment, it is still challenging to develop flexible LIC anodes with high specific capacity and excellent rate capability. Herein, we propose a delicate bottom-up strategy to integrate unique Schiff-base-type polymers into desirable one-dimensional (1D) polymeric structures. A secondary-polymerization-induced template-oriented synthesis approach realizes the 1D integration of Schiff-base porous organic polymers with appealing characteristics of a high nitrogen-doping level and developed pore channels, and a further thermalization yields flexible nitrogen-enriched carbon nanofibers with high specific capacity and fast ion transport. Remarkably, when used as the flexible anode in LICs, the NPCNF//AC LIC demonstrates a high energy density of 154 W h kg^-1 at 500 W kg^-1 and a high power density of 12.5 kW kg^-1 at 104 W h kg^-1. This work may provide a new scenario for synthesizing 1D Schiff-base-type polymer derived nitrogen-enriched carbonaceous materials towards promising free-standing anodes in LICs.

Integrating Highly Porous and Flexible Au Hydrogels with Soft-MEMS Technologies for High-Performance Wearable Biosensing

Wearable biosensors for real-time and non-invasive detection of biomarkers are of importance in early diagnosis and treatment of diseases. Herein, a high-performance wearable biosensing platform was proposed by combining a three-dimensional hierarchical porous Au hydrogel-enzyme electrode with high biocompatibility, activity, and flexibility and soft-MEMS technologies with high precision and capability of mass production. Using glucose oxidase as the model enzyme, the glucose sensor exhibits a sensitivity of 10.51 μA mM^-1 cm^-2, a long durability over 15 days, and a good selectivity. Under the mechanical deformation (0 to 90°), it is able to maintain an almost constant performance with a low deviation of <1.84%. With the assistance of a wireless or a Bluetooth module, this wearable sensing platform achieves real-time and non-invasive glucose monitoring on human skins. Similarly, continuous lactic acid monitoring was also realized with lactate oxidase immobilized on the same sensing platform, further verifying the universality of this sensing platform. Therefore, our work holds promise to provide a universal, high-performance wearable biosensing platform for various biomarkers in sweat and reliable diagnostic information for health management.

Engineering Functional Interface with Built-in Catalytic and Self-Oxidation Sites for Highly Stable Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries have attracted great attention due to their high theoretical energy density. The rapid redox conversion of lithium polysulfides (LiPS) is effective for solving the serious shuttle effect and improving the utilization of active materials. The functional design of the separator interface with fast charge transfer and active catalytic sites is desirable for accelerating the conversion of intermediates. Herein, a graphene-wrapped MnCO₃ nanowire (G@MC) was prepared and utilized to engineer the separator interface. G@MC with active Mn²⁺ sites can effectively anchor the LiPS by forming the Mn-S chemical bond according to our theoretical calculation results. In addition, the catalytic Mn²⁺ sites and conductive graphene layer of G@MC could accelerate the reversible conversion of LiPS via the spontaneous "self-redox" reaction and the rapid electron transfer in electrochemical process. As a result, the G@MC-based battery exhibits only 0.038 % capacity decay (per cycle) after 1000 cycles at 2.0 C. This work affords new insights for designing the integrated functional interface for stable Li-S batteries.

Facile Synthesis of Electrically Conductive and Heatable Nanoparticle/Nanocarbon Hybrid Aerogels

Joule heating studies on nanoparticle/nanocarbon hybrid aerogels have been reported, but systematic investigations on hydrotalcite-derived catalysts supported onto reduced graphene oxide (rGO) aerogels are rare. In this study, hydrotalcite-derived Cu-Al₂O₃ nanoparticles were incorporated into a porous and multifunctional rGO aerogel support for fabricating electrically conducting Cu-Al₂O₃/rGO hybrid aerogels, and their properties were investigated in detail. The hybridization of Cu-Al₂O₃ with a 3D nanocarbon support network imparts additional functionalities to the widely used functional inorganic nanoparticles, such as direct electrical framework heating and easy regeneration and separation of spent nanoparticles, with well-spaced nanoparticle segregation. 3D variable-range hopping model fitting confirmed that electrons were able to reach the entire aerogel to enable uniform resistive heating. The conductivity of the nanocarbon support framework facilitates uniform and fast heating (up to 636 K/min) of the embedded nanoparticles at very low energy consumption, while the large porosity and high thermal conductivity enable efficient heat dissipation during natural cooling (up to 336 K/min). The thermal stability of the hybrid aerogel was demonstrated by repeated heating/cooling cycling at different temperatures that were relevant to important industrial applications. The facile synthetic approach can be easily adapted to fabricate other types of multifunctional nanoparticle/nanocarbon hybrid aerogels, such as the MgAl-MMO/rGO aerogel and the Ni-Al₂O₃/rGO aerogel. These findings open up new routes to the functionalization of inorganic nanoparticles and extend their application ranges that involve electrical/thermal heating, temperature-dependent catalysis, sorption, and sensing.

Implanting Cobalt Atom Clusters within Nitrogen-Doped Carbon Network as Highly Stable Cathode for Lithium-Sulfur Batteries

Realization of highly efficient sulfur electrochemistry, as well as the high capacity of lithium-sulfur (Li-S) batteries, can be achieved by the scientific construction of electrode host materials. In this study, using molten NaCl, a 3D porous nitrogen-doped carbon with uniformly embedded Co atom clusters (Co/PNC) is developed by pyrolyzing the precursors with NaCl at high temperatures. In the composite structure, a network carbon skeleton containing hierarchical pores acts as an advanced matrix for sulfur electrodes, and the doping of N and Co is subject to inhibit the shuttle of long-chain lithium polysulfides through chemical adsorption. The Co/PNC, with the optimized amount of Co, delivers an initial specific capacity of 1105.4 mAh g^-1 at 0.2 C with a capacity drop of only 0.064% after the cell is charged and discharged for 300 cycles at 1 C, revealing its potential in promoting the large-scale application of Li-S batteries.

To Promote the Catalytic Conversion of Polysulfides Using Ni-B Alloy Nanoparticles on Carbon Nanotube Microspheres under High Sulfur Loading and a Lean Electrolyte

Despite their high theoretical energy density, the application of lithium-sulfur batteries is seriously hindered by the polysulfide shuttle and sluggish kinetics, especially with high sulfur loading and under low electrolyte usage. Herein, to facilitate the conversion of lithium polysulfides, nickel-boron (Ni-B) alloy nanoparticles, dispersed uniformly on carbon nanotube microspheres (CNTMs), are used as sulfur hosts for lithium-sulfur batteries. It is demonstrated that Ni-B alloy nanoparticles can not only anchor polysulfides through Ni-S and B-S interactions but also exhibit high electrocatalytic capability toward the conversion of intermediate polysulfide species. In addition, the intertwined CNT microspheres provide an additional conductive scaffold in response to the fast electrochemical redox. The enhanced redox kinetics is beneficial to improve the specific capacity and cycling stability of the sulfur cathode, based on the fast conversion of lithium polysulfides and effective deposition of the final sulfide products. Conclusively, the S/Ni-B/CNTM composite delivers a high specific capacity (1112.7 mAh g_s^-1) along with good cycle performance under both high sulfur loading (8.3 mg cm^-2) and a lean electrolyte (3 μL mg_s^-1). Consequently, this study opens up a path to design new sulfur hosts toward lithium-sulfur batteries.

Carbon Nanomaterials With Hollow Structures: A Mini-Review

Carbon nanomaterials with high electrical conductivity, good chemical, and mechanical stability have attracted increasing attentions and shown wide applications in recent years. In particularly, hollow carbon nanomaterials, which possess ultrahigh specific surface area, large surface-to-volume ratios, and controllable pore size distribution, will benefit to provide abundant active sites, and mass loading vacancy, accelerate electron/ion transfer as well as contribute to the specific density of energy storage systems. In this mini-review, we summarize the recent progresses of hollow carbon nanomaterials by focusing on the synthesis approaches and corresponding nanostructures, including template-free and hard-template carbon hollow structures, metal organic framework-based hollow carbon structures, bowl-like and cage-like structures, as well as hollow fibers. The design and synthesis strategies of these hollow carbon nanomaterials have been systematically discussed. Finally, the emerging challenges and future prospective for developing advanced hollow carbon structures were outlined.