Facile Synthesis of Bimetallic Fluoride Heterojunctions on Defect-Enriched Porous Carbon Nanofibers for Efficient ORR Catalysts

Achieving pH-universal oxygen electrolysis via synergistic density and coordination tuning over biomass-derived Fe single-atom catalyst

Renewable biomass serves as a cost-effective source of carbon matrix to carry single-atom catalysts (SACs). However, the natural abundant oxygen in these materials hinders the sufficient dispersion of element with high oxygen affinity such iron (Fe). The lowered-density and oxidized SACs greatly limits their catalytic applications. Here we develop a facile continuous activation (CA) approach for synthesizing robust biomass-derived Fe-SACs. Comparing to the traditional pyrolysis method, the CA approach significantly increases the Fe loading density from 1.13 atoms nm-2 to 4.70 atoms nm-2. Simultaneously, the CA approach induces a distinct coordination tuning from dominated Fe-O to Fe-N moieties. We observe a pH-universal oxygen reduction reaction (ORR) performance over the CA-derived Fe-SACs with a half-wave potential of 0.93 V and 0.78 V vs. RHE in alkaline and acidic electrolyte, respectively. Density functional theory calculations further reveal that the increased Fe-N coordination effectively reduces the energy barriers for the ORR, thus enhancing the catalytic activity. The Fe-SACs-based zinc-air batteries show a specific capacity of 792 mA·h·gZn-1 and ultra-long life span of over 650 h at 5 mA cm-2.

Mono-/Bimetallic Doped and Heterostructure Engineering for Electrochemical Energy Applications

Designing efficient materials is crucial to meeting specific requirements in various electrochemical energy applications. Mono-/bimetallic doped and heterostructure engineering have attracted considerable research interest due to their unique functionalities and potential for electrochemical energy conversion and storage. However, addressing material imperfections such as low conductivity and poor active sites requires a strategic approach to design. This review explores the latest advancements in materials modified by mono-/bimetallic doped and heterojunction strategies for electrochemical energy applications. It can be subdivided into three key points: (i) the regulatory mechanisms of metal doping and heterostructure engineering for materials; (ii) the preparation methods of materials with various engineering strategies; and (iii) the synergistic effects of two engineering approaches, further highlighting their applications in supercapacitors, alkaline ion batteries, and electrocatalysis. Finally, the review concludes with perspectives and recommendations for further research to advance these technologies.

Copper dual-doping strategy of porous carbon nanofibers and nickel fluoride nanorods as bi-functional oxygen electrocatalysis for effective zinc-air batteries

Designing and developing efficient, low-cost bi-functional oxygen electrocatalysts is essential for effective zinc-air batteries. In this study, we propose a copper dual-doping strategy, which involves doping both porous carbon nanofibers (PCNFs) and nickel fluoride nanoparticles with copper alone, successfully preparing copper-doped nickel fluoride (NiF2) nanorods and copper nanoparticles co-modified PCNFs (Cu@NiF2/Cu-PCNFs) as an efficient bi-functional oxygen electrocatalyst. When copper is doped into the PCNFs in the form of metallic nanoparticles, the doped elemental copper can improve the electronic conductivity of composite materials to accelerate electron conduction. Meanwhile, the copper doping for NiF2 can significantly promote the transformation of nickel fluoride nanoparticles into nanorod structures, thus increasing the electrochemical active surface area and enhancing mass diffusion. The Cu-doped NiF2 nanorods also possess an optimized electronic structure, including a more negative d-band center, smaller bandgap width and lower reaction energy barrier. Under the synergistic effect of these advantages, the obtained Cu@NiF2/Cu-PCNFs exhibit outstanding bi-functional catalytic performances, with a low overpotential of 0.68 V and a peak power density of 222 mW cm-2 in zinc-air batteries (ZABs) and stable cycling for 800 h. This work proposes a one-step way based on the dual-doping strategy, providing important guidance for designing and developing efficient catalysts with well-designed architectures for high-performance ZABs.

Elucidating the enduring transformations in cellulose-based carbon nanofibers through prolonged isothermal treatment

This study investigates the conversion of highly acetylated sugarcane bagasse into high-modulus carbon nanofibers (CnNFs) with exceptional electrical conductivity. By electrospinning the bagasse into nanofibers with diameters ranging from 80 nm to 800 nm, a cost-effective CnNFs precursor is obtained. The study reveals the transformation of the cellulose crystalline structure into a stable antiparallel chain arrangement of cellulose II following prolonged isothermal treatment, leading to a remarkable 50 % increase in CnNFs recovery with carbon contents ranging from 80 % to 90 %. This surpasses the performance of any other reported biomass precursors. Furthermore, graphitization-induced shrinkage of CnNFs diameter results in significant growth of specific surface area and pore volume in the resulting samples. This, along with a highly ordered nanostructure and high crystallinity degree, contributes to an impressive tensile modulus of 9.592 GPa, surpassing that of most petroleum-based CnNFs documented in the literature. Additionally, the prolonged isothermal treatment influences the d002 value (measured at 0.414 nm) and CnNFs degree of crystallinity, leading to an enhancement in electrical conductivity. However, the study observes no size effect advantages on mechanical properties and electrical conductivity, possibly attributed to the potential presence of point defects in the ultrathin CnNFs. Overall, this research opens a promising and cost-effective pathway for converting sugarcane biomasses into high-modulus carbon nanofibers with outstanding electrical conductivity. These findings hold significant implications for the development of sustainable and high-performance materials for various applications, including electronics, energy storage, and composite reinforcement.

MnF2 Surface Modulated Hollow Carbon Nanorods on Porous Carbon Nanofibers as Efficient Bi-Functional Oxygen Catalysis for Rechargeable Zinc-Air Batteries

Developing highly efficient bi-functional noble-metal-free oxygen electrocatalysts with low-cost and scalable synthesis approach is challenging for zinc-air batteries (ZABs). Due to the flexible valence state of manganese, MnF2 is expected to provide efficient OER. However, its insulating properties may inhibit its OER process to a certain degree. Herein, during the process of converting the manganese source in the precursor of porous carbon nanofibers (PCNFs) to manganese fluoride, the manganese source is changed to manganese acetate, which allows PCNFs to grow a large number of hollow carbon nanorods (HCNRs). Meanwhile, manganese fluoride will transform from the aggregation state into uniformly dispersed MnF2 nanodots, thereby achieving highly efficient OER catalytic activity. Furthermore, the intrinsic ORR catalytic activity of the HCNRs/MnF2@PCNFs can be enhanced due to the charge modulation effect of MnF2 nanodots inside HCNR. In addition, the HCNRs stretched toward the liquid electrolyte can increase the capture capacity of dissolved oxygen and protect the inner MnF2, thereby enhancing the stability of HCNRs/MnF2@PCNFs for the oxygen electrocatalytic process. MnF2 surface-modulated HCNRs can strongly enhance ORR activity, and the uniformly dispersed MnF2 can also provide higher OER activity. Thus, the prepared HCNRs/MnF2@PCNFs obtain efficient bifunctional oxygen catalytic ability and high-performance rechargeable ZABs.

The Contact Interface Electronic Coupling of Cobalt and Zirconia Enables Stable and Highly Efficient 4e- Oxygen Reduction Reaction Catalysis

Cobalt (Co) is an efficient oxygen reduction reaction (ORR) catalyst but suffers from issues of easy deactivation and instability. Here, it shows that ZrO2 can stabilize Co through interface electron coupling and enables highly efficient 4e- ORR catalysis. Porous carbon nanofibers loaded with dispersed Co-nanodots (≈10 nm, 9.63 wt%) and ZrO2 nanoparticles are synthesized as the catalyst. The electron transfer from the metallic Co to ZrO2 causes interface-oriented electron enrichment that promotes the activation and conversion of O2, improving the efficiency of 4e- transfer. Moreover, the simulation results show that ZrO2 acts like an electron reservoir to store electrons from Co and slowly release them to the interface, solving the easy deactivation problem of Co. The catalyst exhibits a high half-wave potential (E1/2) of 0.84 V, which only decreases by 3.6 mV after 10 000 cycles, showing great stability. Particularly, the enhanced spin polarization of Co in a magnetic field reinforces the interface electron coupling that increases the E1/2 to 0.864 V and decreases the energy barrier of ORR from 0.81 to 0.63 eV, confirming that the proposed strategy is effective for constructing efficient and stable ORR catalysts.

Recent Advances in Flexible Wearable Technology: From Textile Fibers to Devices

Smart textile fabrics have been widely investigated and used in flexible wearable electronics because of their unique structure, flexibility and breathability, which are highly desirable with integrated multifunctionality. Recent years have witnessed the rapid development of textile fiber-based flexible wearable devices. However, the pristine textile fibers still can't meet the high standards for practical flexible wearable devices, which calls for the development of some effective modification strategies. In this review, we summarize the recent advances in the flexible wearable devices based on the textile fibers, putting special emphasis on the design and modifications of textile fibers. In addition, the applications of textile fibers in various fields and the critical role of textile fibers are also systematically discussed, which include the supercapacitors, sensors, triboelectric nanogenerators, thermoelectrics, and other self-powered electronic devices. Finally, the main challenges that should be overcome and some effective solutions are also manifested, which will guide the future development of more effective textile fiber-based flexible wearable devices.

Non-noble metal single-atoms for oxygen electrocatalysis in rechargeable zinc-air batteries: recent developments and future perspectives

Ever-growing demands for zinc-air batteries (ZABs) call for the development of advanced electrocatalysts. Single-atom catalysts (SACs), particularly those for isolating non-noble metals (NBMs), are attracting great interest due to their merits of low cost, high atom utilization efficiency, structural tunability, and extraordinary activity. Rational design of advanced NBM SACs relies heavily on an in-depth understanding of reaction mechanisms. To gain a better understanding of the reaction mechanisms of oxygen electrocatalysis in ZABs and guide the design and optimization of more efficient NBM SACs, we herein organize a comprehensive review by summarizing the fundamental concepts in the field of ZABs and the recent advances in the reported NBM SACs. Moreover, the selection of NBM elements and supports of SACs and some effective strategies for enhancing the electrochemical performance of ZABs are illustrated in detail. Finally, the challenges and future direction in this field of ZABs are also discussed.

Effects of Reduction Methods on the Performance of Shewanella oneidensis MR-1 Palladium/Carbon Catalyst for Oxygen Reduction Reaction

The influence of the reduction method on the morphology and performance of the catalyst still controversial. In this study, hydrogen, Shewanella oneidensis MR-1 (MR-1), MR-1 and hydrogen coreduction are used to reduce the palladium ions adsorbed by MR-1 to obtain Pd/CH2, Pd/CM, and Pd/CH2+M catalyst, respectively. It is found that the palladium nanoparticles (Pd NPs) in Pd/CH2+M are the largest, while the Pd NPs in Pd/CM are the smallest. This is due to the reduction of Pd NPs in Pd/CH2+M under anaerobic conditions to form smaller Pd NPs that will further aggregate and grow in H2. In addition, Pd/CM exhibited the best catalytic performance with a mass activity of 0.31 A mg-1, better than that of Pd/CH2 (0.06 A mg-1) and Pd/CH2+M (0.13 A mg-1). This study provides a meaningful reference for the selection of reduction methods in metal catalysts.

Boosting activity on copper functionalized biomass graphene by coupling nanocrystalline Nb2O5 as impressive rate capability for supercapacitor and outstanding catalytic activity for oxygen reduction

A novel and hierarchical porous but cross-linked copper-doped biomass graphene (Cu@HPBG) combined with Nb2O5 (denoted as Nb2O5/Cu@HPBG) is successfully fabricated on a large-scale using fig peels as biomass carbon and copper as the graphitization catalyst. During the synthesis process, basic copper carbonate serves dual functions of pore-forming agent, as well as homogeneous copper provider, and NH3 is employed as a defect-forming agent and N dopant. Owing to the porous hierarchical structure increased availability of contact interface and pseudo capacitance active sites provided by copper and Nb2O5, the assembled asymmetrical supercapacitor (ASC) employing Nb2O5/Cu@HPBG as positive electrode and HPBG as negative electrode can not only widen the stability window range of 0～1.9 V, but also deliver a maximum gravimetric energy density of 82.8 W h kg-1 at the power density of 950.0 W kg-1 and maintain a remarkable cycling stability of 97.1% after 15,000 cycles. Impressively, due to the synergistic enhancement of Cu@HPBG and Nb2O5, the resulting Nb2O5/Cu@HPBG hybrid displays more positive half wave potential (∼0.85 V) and a long-life stability than Pt/C electrode toward oxygen reduction reaction (ORR). Our research provides a feasible strategy to fabricate renewable biomass graphene electroactive composites for large-scale supercapacitor electrodes and efficient ORR catalysts toward energy applications.

Oxygen vacancy engineering of mesoporous Bi-Fe2O3@NC multi-channel microspheres for remarkable oxygen reduction and aqueous/flexible Zn-air batteries

Designing multi-channel mesoporous structure and introducing oxygen vacancies to synergistically enhance oxygen reduction reaction (ORR) activity is crucial for the practical application of zinc-air batteries (ZABs) in the field of energy storage and conversion. Herein, a novel multi-channel mesoporous Bi-Fe2O3 microsphere with abundant oxygen vacancies supported on nitrogen-doped carbon (denoted as Bi-Fe2O3@NC) is constructed and the designated catalyst demonstrates a higher half-wave potential (0.88 V), large limiting current density (5.8 mA cm-2@0.4 V), and superior stability. Besides, the aqueous ZAB utilizing Bi-Fe2O3@NC cathode achieves a high power density of 198.6 mW cm-2 and maintains exceptional stability for 459 h at 5 mA cm-2, superior to most previously reported catalysts. Furthermore, a solid-state ZAB assembled with Bi-Fe2O3@NC shows a power density of 55.9 mW cm-2, highlighting its potential for flexible ZAB applications. The prominent ORR performance of Bi-Fe2O3@NC can be ascribed to its unique multi-channel mesoporous structure and abundant oxygen vacancies, which increase the exposure of active sites and facilitate efficient electron/mass transport. This work provides valuable insights for the rational design of advanced ORR catalysts for the practical requirements of aqueous/flexible ZABs in energy storage and conversion.

In situ growth of surface-reconstructed aluminum fluoride nanoparticles on N, F codoped hierarchical porous carbon nanofibers as efficient ORR/OER bifunctional electrocatalysts for rechargeable zinc-air batteries

Modified porous carbon fibers have emerged as crucial electrocatalytic materials for zinc-air battery (ZAB) systems. However, most methods for preparing porous carbon fibers are complex and exhibit single functionality and poor catalytic activity, which hinders the development of ZABs. In this study, we design and synthesize a novel type of N, F codoped hierarchical porous carbon fiber with in situ growth of aluminum fluoride nanoparticles (AlF3@HPCNFs) through electrospinning and high-temperature carbonization. The N, F codoping effectively adjusts the charge density of neighboring carbon atoms and introduces additional active sites. Furthermore, the catalytic process induces surface reconstruction of AlF3 nanoparticles, allowing for their full exposure to the liquid electrolyte and accelerated catalytic reactions. Additionally, this interconnected hierarchical porous structure accelerates mass transfer at the oxygen/carbon-based substrate/electrolyte three-phase interfaces, thereby enhancing reaction kinetics and the accessibility of catalytic active sites, ultimately improving the utilization efficiency of these sites. Consequently, the AlF3@HPCNFs catalyst exhibits excellent bifunctional performance with a narrow potential difference (△E = 0.67 V). Moreover, the obtained bifunctional electrocatalyst is utilized for rechargeable ZABs, surpassing commercially available Pt/C + RuO2 cells in terms of high specific capacity (796 mAh gzn-1) and outstanding cycling stability (over 500 h). This research demonstrates the potential of AlF3@HPCNFs as a bifunctional electrocatalyst and introduces a simplified and effective method for the fabrication of metal fluoride-modified and hierarchically porous carbon nanofibers for rechargeable ZABs.

An Ultrastable Bifunctional Electrocatalyst Derived from a Co2+-Anchored Covalent-Organic Framework for High-Efficiency ORR/OER and Rechargeable Zinc-Air Battery

It remains a great challenge to develop alternative electrocatalysts with high stability for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Herein, a bifunctional electrocatalyst composed of hollow CoOx (Co3O4/CoO) nanoparticles embedded in lamellar carbon nanofibers is derived from a Co2+-anchored covalent-organic framework. The as-fabricated electrocatalyst (CoOx@NC-800) exhibits a half-wave potential (E1/2) of 0.89 V with ultrahigh long-term stability (100% current retention after 3000 CV cycles). Together with promising OER performance, the CoOx@NC-800 based reversible Zn-air battery displays a small potential gap (0.70 V), superior to that of the commercial 20% Pt/C + RuO2. The density functional theory (DFT) calculations reveal that the remarkable electrocatalytic performance and stability of CoOx@NC-800 are attributed to the optimized adsorption of the *OOH intermediate and reduced free energy of the potential-limiting step. This study establishes the functionalization of COF structure for fabrication of high-performance carbon-based electrocatalysts.

Engineering metallenes for boosting electrocatalytic biomass-oxidation-assisted hydrogen evolution reaction

Metallenes exhibit great potential for catalytic reaction, particularly for the hydrogen evolution reaction (HER) and biomass oxidation reaction, due to their favorable electronic configurations, ultrahigh specific surface areas, and highly accessible surface atoms. Therefore, metallenes can function as bifunctional electrocatalysts to boost the energy-saving biomass-oxidation-assisted HER, and have attracted great interest. Given the growing importance of green hydrogen as an alternative energy source in recent years, it is timely and imperative to summarize the recent progress and current status of metallene-based catalysts for the biomass-oxidation-assisted HER. Here, we review the recent advances in metallenes in terms of composition and structural regulations including alloying, nonmetal doping, defect engineering, surface functionalization, and heterostructure engineering strategies and their applications in driving electrocatalytic HER, with special focus on biomass-oxidation-assisted hydrogen production. The underlying structure-activity relationship and mechanisms are also comprehensively discussed. Finally, we also propose the challenges and future directions of metallene-based catalysts for the applications in biomass-oxidation-assisted HER.

One-dimensional carbon based nanoreactor fabrication by electrospinning for sustainable catalysis

An efficient and economical electrocatalyst as kinetic support is key to electrochemical reactions. For this reason, chemists have been working to investigate the basic changing of chemical principles when the system is confined in limited space with nanometer-scale dimensions or sub-microliter volumes. Inspired by biological research, the design and construction of a closed reaction environment, namely the reactor, has attracted more and more interest in chemistry, biology, and materials science. In particular, nanoreactors became a high-profile rising star and different types of nanoreactors have been fabricated. Compared with the traditional particle nanoreactor, the one-dimensional (1D) carbon-based nanoreactor prepared by the electrospinning process has better electrolyte diffusion, charge transfer capabilities, and outstanding catalytic activity and selectivity than the traditional particle catalyst which has great application potential in various electrochemical catalytic reactions.

Advanced and Stable Metal-Free Electrocatalyst for Energy Storage and Conversion: The Structure-Effect Relationship of Heteroatoms in Carbon

Ever-developing energy device technologies require the exploration of advanced materials with multiple functions. Heteroatom-doped carbon has been attracting attention as an advanced electrocatalyst for zinc-air fuel cell applications. However, the efficient use of heteroatoms and the identification of active sites are still worth investigating. Herein, a tridoped carbon is designed in this work with multiple porosities and high specific surface area (980 m^-2 g^-1). The synergistic effects of nitrogen (N), phosphorus (P), and oxygen (O) in micromesoporous carbon on oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) catalysis are first investigated comprehensively. Metal-free N-, P-, and O-codoped micromesoporous carbon (NPO-MC) exhibits attractive catalytic activity in zinc-air batteries and outperforms a number of other catalysts. Combined with a detailed study of N, P, and O dopants, four optimized doped carbon structures are employed. Meanwhile, density functional theory (DFT) calculations are made for the codoped species. The lowest free energy barrier for the ORR can be attributed to the pyridine nitrogen and N-P doping structures, which is an important reason for the remarkable performance of NPO-MC catalyst in electrocatalysis.

Synergistic Bimetallic CoCu-Codecorated Carbon Nanosheet Arrays as Integrated Bifunctional Cathodes for High-Performance Rechargeable/Flexible Zinc-Air Batteries

The unremitting exploration of well-architectured and high-efficiency oxygen electrocatalysts is promising to speed up the surface-mediated oxygen reduction/evolution reaction (ORR/OER) kinetics of rechargeable zinc-air batteries (ZABs). Herein, bimetallic CoCu-codecorated carbon nanosheet arrays (CoCu/N-CNS) are proposed as self-supported bifunctional oxygen catalysts. The integrated catalysts are in situ constructed via a simple sacrificial-templated strategy, imparting CoCu/N-CNS with 3D interconnected conductive pathways, abundant mesopores for electrolyte penetration and ion diffusion, as well as Cu-synergized Co-N_x /O reactive sites for improved catalytic activities. By incorporating a moderate amount of Cu into CoCu/N-CNS, the bifunctional activities can be further increased due to synergistic oxygen electrocatalysis. Consequently, the optimized CoCu/N-CNS realizes a low overall overpotential of 0.64 V for OER and ORR and leads to high-performance liquid ZABs with high gravimetric energy (879.7 Wh kg^-1 ), high peak power density (104.3 mW cm^-2 ), and remarkable cyclic stability upon 400 h/1000 cycles at 10 mA cm^-2 . More impressively, all-solid-state flexible ZABs assembled with the CoCu/N-CNS cathode exhibit superior rate performance and exceptional mechanical flexibility under arbitrary bending conditions. This CoCu/N-CNS monolith holds significant potential in advancing cation-modulated multimetallic electrocatalysts and multifunctional nanocatalysts.

Stabilizing High Density Cu Active Sites with ZrO2 Quantum Dots as Chemical Ligand in N-doped Porous Carbon Nanofibers for Efficient ORR

The emerging transition metal-nitrogen-carbon (MNC) materials are considered as a promising oxygen reduction reaction (ORR) catalyst system to substitute expensive Pt/C catalysts due to their high surface area and potential high catalytic activity. However, MNC catalysts are easy to be attacked by the ORR byproducts that easily lead to the deactivation of metal active sites. Moreover, a high metal loading affects the mass transfer and stability, but a low loading delivers inferior catalytic activity. Here, a new strategy of designing ZrO₂ quantum dots and N-complex as dual chemical ligands in N-doped bubble-like porous carbon nanofibers (N-BPCNFs) to stabilize copper (Cu) by forming CuZrO_3-x /ZrO₂ heterostructures and CuN ligands with a high loading of 40.5 wt.% is reported. While the highly porous architecture design of N-BPCNFs builds a large solidelectrolytegas phase interface and promotes mass transfer. The preliminary results show that the half-wave potential of the catalyst reaches 0.856 V, and only decreases 0.026 V after 10 000 cycles, exhibiting excellent stability. The proposed strategy of stabilizing metal active sites with both heterostructures and CuN ligands is feasible and scalable for developing high metal loading ORR catalyst.

Hierarchical meso-micro porous FeNC derived from tripolycyanamide-based microporous polymer as efficient electrocatalyst for oxygen reduction reaction

Designing porous FeNC nanomaterials with highly efficient active sites is an effective strategy for constructing high-performance oxygen reduction reaction (ORR) electrocatalysts. N-containing porous organic polymers (POPs) have emerged as promising candidates for the preparation of porous FeNC catalysts. Here, N-rich tripolycyanamide-based microporous polymer (TCAMP)-coated SiO₂ nanospheres (SiO₂@TACMP) were prepared as the precursors of an Fe-N doped hierarchical meso-micro porous carbon (Fe-N-HMC) electrocatalyst for the ORR. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM) characterizations demonstrated that the Fe-N-HMC catalyst possessed a higher content percentage of Fe-N_x active sites and a better distribution of Fe nanoparticles than its Fe-N doped microporous carbon (Fe-N-MC) counterpart. N₂ adsorption-desorption isotherm analysis showed that Fe-N-HMC catalyst exhibited a hierarchical meso-micro porous system, with a Brunauer-Emmett-Teller (BET) surface area (S_BET) of 733 m² g^-1 (∼2 times of Fe-N-MC's S_BET). As a result, Fe-N-HMC catalyst presented a highly efficient ORR performance with a half-wave potential of 0.856 mV, which is similar to the commercial grade 20 wt% Pt/C catalyst and superior to the Fe-N-MC catalyst. Moreover, the as-synthesized Fe-N-HMC catalyst displayed a better durability and methanol tolerance than the commercial Pt/C catalyst. Therefore, Fe-N-HMC shows great promise as an ORR catalyst for fuel batteries and metal-air cells due to its low-cost, high activity, and good stability.

Facile Preparation of Cobalt Nanoparticles Encapsulated Nitrogen-Doped Carbon Sponge for Efficient Oxygen Reduction Reaction

The facile preparation of non-noble metal nanoparticle loaded carbon nanomaterials is promising for efficient oxygen reduction reaction (ORR) electrocatalysis. Herein, a facile preparation strategy is proposed to prepare nitrogen-doped carbon sponge loaded with fine cobalt nanoparticles by the direct pyrolysis of the cobalt ions adsorbed polymeric precursor. The polymeric sponge precursor with continuous framework and high porosity is formed by the self-assembly of a poly(amic acid). Taking advantage of the negatively charged surface and porous structure, cobalt ions can be efficiently adsorbed into the polymeric sponge. After pyrolysis, fine cobalt nanoparticles covered by carbon layers are formed, while the sponge-like structure of the precursor is also well-preserved in order to give cobalt nanoparticles loaded nitrogen-doped carbon sponges (Co/CoO@NCS) with a high loading content of 44%. The Co/CoO@NCS exhibits promising catalytic activity toward ORR with a half-wave potential of 0.830 V and a limiting current density of 4.71 mA cm^-2. Overall, we propose a facile polymer self-assembly strategy to encapsulate transition metal nanoparticles with high loading content on a nitrogen-doped carbon sponge for efficient ORR catalysis.

Heterostructure Engineering of 2D Superlattice Materials for Electrocatalysis

Exploring low-cost and high-efficient electrocatalyst is an exigent task in developing novel sustainable energy conversion systems, such as fuel cells and electrocatalytic fuel generations. 2D materials, specifically 2D superlattice materials focused here, featured highly accessible active areas, high density of active sites, and high compatibility with property-complementary materials to form heterostructures with desired synergetic effects, have demonstrated to be promising electrocatalysts for boosting the performance of sustainable energy conversion and storage devices. Nevertheless, the reaction kinetics, and in particular, the functional mechanisms of the 2D superlattice-based catalysts yet remain ambiguous. In this review, based on the recent progress of 2D superlattice materials in electrocatalysis applications, the rational design and fabrication of 2D superlattices are first summarized and the application of 2D superlattices in electrocatalysis is then specifically discussed. Finally, perspectives on the current challenges and the strategies for the future design of 2D superlattice materials are outlined. This review attempts to establish an intrinsic correlation between the 2D superlattice heterostructures and the catalytic properties, so as to provide some insights into developing high-performance electrocatalysts for next-generation sustainable energy conversion and storage.

Material design and surface chemistry for advanced rechargeable zinc-air batteries

Zinc–air batteries (ZABs) have been considered as a next-generation battery system with high energy density and abundant resources. However, the sluggish multi-step reaction of the oxygen is the main obstacle for the practical application of ZABs. Therefore, bifunctional electrocatalysts with high stability and activity for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) are greatly required to promote the catalytic reaction. In this review, we first explain the reaction mechanism of the ZABs, mainly focusing on multiple oxygen intermediates. Then, the latest studies on bifunctional electrocatalysts for the air cathodes and their progress of the ZABs are discussed with following aspects: platinum group metal, metal-free, transition metal, and metal compound-derived electrocatalysts. Finally, we highlight the advanced ZAB systems with the design of the full-temperature range operation, the all-solid-state, and the newly reported non-alkaline electrolyte, summarizing the remaining challenges and requirements of the future research directions.

This work reviews latest research on the bifunctional electrocatalysts for air cathodes, introducing the advanced zinc–air batteries with the full-temperature range operation, all-solid-states, and newly reported non-alkaline electrolytes.

Antioxidant, Antimicrobial, and Photocatalytic Potential of Cobalt Fluoride (CoF2) Nanoparticles

Herein, CoF2 nanoparticles (NPs) are prepared by simple coprecipitation method and are characterized by various techniques, i.e., XRD, SEM/EDX, FTIR, and UV/Vis, for their structure identification. As-prepared nanostructures were used as photocatalyst, as antioxidant, and as antimicrobial agent. The degradation studies of the prepared samples were carried out for specific time for the degradation of methylene blue (MLB) dye under a UV/visible spectrophotometer to determine decolorization and change in concentration of MLB with respect to time. The antibacterial activity against Escherichia coli (E. coli) and Bacillus subtilis (B. subtilis) was measured by well diffusion and serial dilution method to determine their efficiency against these two bacteria, through a dose-dependent method. The antibacterial activity was further confirmed against the experimental bacteria through calculation of minimum inhibition concentration (MIC). The antioxidant activity (radical scavenging activity) of the prepared CoF2 NPs was also assessed.

Tuning d-Band Center of Pt by PtCo-PtSn Heterostructure for Enhanced Oxygen Reduction Reaction Performance

The development of efficient and stable Pt-based catalysts is significant but challenging for fuel cells. Herein, Sn and Co elements are introduced into Pt to form PtCo-PtSn/C heterostructure for enhancing the oxygen reduction reaction (ORR). Electrochemical results indicate that it has remarkable ORR intrinsic activity with a high mass activity (1,158 mA mg^-1 Pt) at 0.9 V in HClO₄ solution, which is 2.18-, 6.81-, and 9.98-fold higher than that of PtCo/C, PtSn/C, and Pt/C. More importantly, the catalytic activity attenuation for PtCo-PtSn/C is only 27.4% after 30 000 potential cycles, showing high stability. Furthermore, theoretical calculations reveal that the enhancement is attributed to charge transfer and the unique structure of PtCo-PtSn/C heterostructure, which regulate the d-band center of Pt and prevent non-noble metals from further dissolution. This work thus opens a way to design and prepare highly efficient Pt-based alloy catalysts for proton exchange membrane fuel cells.

Design and Facile Synthesis of Highly Efficient and Durable Bifunctional Oxygen Electrocatalyst Fe-Nx/C Nanocages for Rechargeable Zinc-Air Batteries

Looking for a high-efficiency, durabile, and low-cost dual-functional oxygen electrocatalyst as the air electrode catalyst in rechargeable zinc-air batteries (ZABs) is urgently desirable but faces many challenges. Herein, we propose the preparation strategy of effectively using a bifunctional electrocatalyst (Fe-N_x/C) based on the zeolite imidazole organic framework-8 (ZIF-8) as the template agent, with surface modification coated by ferrocene (Fc) molecules followed by pyrolysis at high temperature under inert atmosphere. Benefiting from the surface modification of ZIF-8 with Fc molecules, more abundant multiple catalytic Fe/Fe-N_x/FeC_x sites with high intrinsic activity are derived, the resultant Fe-N_x/C exhibits excellent potential gap (ΔE = 0.63 V) and durability, which is obviously superior to the Pt/C + IrO₂ benchmark (ΔE = 0.77 V) and other state-of-the-art electrocatalysts. Furthermore, the assembled rechargeable ZABs employing the Fe-N_x/C as an air-electrode show a reduced charging-discharging potential difference of 0.603 V, high power density of 214.8 mW cm^-2, and long-term cycling stability of more than 290 h at 2.0 mA cm^-2. Therefore, this work presents a feasible strategy to prepare a high-efficiency and durability ORR/OER bifunctional electrocatalyst toward high performance ZABs and next-generation energy storage devices.

Large-scale defect-rich iron/nitrogen co-doped graphene-based materials as the excellent bifunctional electrocatalyst for liquid and flexible all-solid-state zinc-air batteries

Defect-engineering in transition-metal-doped carbon-based catalyst plays an essential role for improving the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) performance. Herein, we report a ball-milling induced defect assisted with ZnCl₂ strategy for fabricating defect-rich iron/nitrogen co-doped graphene-based materials (Fe-N-G). The substantial mechanical shear forces and the constant corrosion to the carbon matrix by ZnCl₂ lead to the creation of abundant defects in graphene-based materials, which facilitates doping for heteroatoms. The defect-rich Fe-N-G catalyst with abundant Fe-N_x active sites displays excellent ORR performance. For OER, the over potential for Fe-N-G outperforms that of RuO₂ in 1 M KOH at 10 mA cm^-2. The Density Functional Theory calculations unravel that the impressive OER performance is attributable to the introduction of abundant defects. Additionally, the liquid and all-solid-state zinc-air batteries equipped with the prepared material as the air cathode demonstrate high power density, high specific capacity, and long charge-discharge stability. This work offers a practical method for manufacturing high-performance electrocatalysts for environmental and energy-related fields.

Anchored Pt-Co Nanoparticles on Honeycombed Graphene as Highly Durable Catalysts for the Oxygen Reduction Reaction

Durability is an important factor in evaluating the performance of a catalyst. In this work, the spatial protection of the carrier to nanoparticles was considered to improve the durability of the catalyst. It is found that a honeycombed graphene with a three-dimensional (3D)-hierarchical porous structure (3D HPG) can help to reduce the shedding of Pt-Co nanoparticles (Pt-Co NPs) because 3D HPG can form a protective layer to reduce the direct erosion of Pt-Co NPs on the interface by an electrolyte. Then, appropriate oxygen groups were introduced on the 3D reduced hierarchical porous graphene oxide (3D rHPGO) to improve the dispersion of Pt-Co NPs on the surface of the carrier. It was found that the Pt d-band of the catalyst was anchored by π sites of carbonyl of an oxygen group. After optimization, the catalyst (referred to as Pt-Co/3D rHPGO) achieved a 2-fold enhancement in mass activity than that of a commercial Pt/C catalyst. More importantly, after the accelerated durability test (ADT) of 20 000 cycles, the Pt-Co/3D rHPGO catalyst can almost sustain this level of performance, whereas other catalysts showed a comparatively large loss of activity. According to the results, the high durability of Pt-Co/3D rHPGO was attributed to spatial protection of Pt-Co NPs and the defects on the surface allowed the electrolyte to enter. In addition, oxygen groups provided an anchoring effect on nanoparticles. Thus, the Pt-Co/3D rHPGO electrocatalyst exhibited splendid durability, holding a potential to be applied in PEMFC for long-term work.