Conducting Polyaniline for Antifouling Ultrafiltration Membranes: Solutions and Challenges

Structure and Conformational Properties of a Short Polyaniline Chain in a Mixture of Water and Ionic Liquid [1-Ethyl-3-methyl-imidazolium][bistriflimide] Investigated by All-Atom Molecular Dynamics Simulations

Development of antifouling membranes for water treatment using conducting polymers and their composites is a fundamental strategy to mitigate the fouling. This manuscript presents an all-atom molecular dynamics simulations of a conducting polymer, polyaniline (PANI), immersed in an ionic liquids (ILs)-water mixtures. We have considered the ionic liquid 1-ethyl-3-methyl imidazolium bistriflimide, [EMIM]+[BIS]-. The two forms of polyaniline, emeraldine base (EB) and emeraldine salt (ES), were considered. Various intra- and intermolecular structural properties of PANI were analyzed, such as polymer chain radius of gyration Rg, radial distribution functions, and torsional angle distributions. The Rg of EB shows an increase, while the Rg of ES shows a decrease with an increase in the IL concentration. The backbone torsional angle probability distributions show a significant trans state for EB, while a combination of trans and gauche states was observed for ES. Similar supportive distributions were seen in the backbone angular distributions. Radial distribution functions between the carbon atoms at ortho and meta positions of the benzene ring on both ES and EB, as well as the amine group attached between two benzene rings, show an enhanced interaction with the ionic liquid compared to water. Anions have a dominant interaction with the polymer chain when compared to cations. The solvent accessible surface area (SASA) calculations were in accordance with the EB and ES structural properties. The SASA values are more favorable for ES than for EB. H-bond analysis shows a decrease in the number of H-bonds with water as the IL concentration increases.

Enhanced dye adsorption with conductive polyaniline doped chitosan nanofibrous membranes

Polyaniline is widely used in the field of electrochemistry due to its excellent electrical conductivity. However, its effectiveness and mechanism of enhancing adsorption property are unclear. Herein, chitosan/polyaniline nanofibrous composite membranes with average diameter ranging from 200 to 300 nm were fabricated by electrospinning technology. The as-prepared nanofibrous membranes exhibited significantly improved adsorption capacity of 814.9 mg/g and 618.0 mg/g towards acid blue 113 and reactive orange dyes, which were 121.8 % and 99.4 % higher than that of pure chitosan membrane. The doped polyaniline promoted the dye transfer rate and capacity due to the enhanced conductivity of the composite membrane. Kinetic data showed that chemisorption was the rate-limiting step, and thermodynamic data indicated the adsorption of the two anionic dyes was spontaneous monolayer adsorption. This study provides a feasible strategy to introduce conductive polymer into adsorbent to construct high performance adsorbents for wastewater treatment.

Photo-Fenton self-cleaning carbon fibers membrane supported with Zr-MOF@Fe2O3 for effective phosphate removal from algae-rich water

Adsorbents featuring abundant binding sites and high affinity to phosphate have been used to resolve water eutrophication. However, most of the developed adsorbents were focused on improving the adsorption ability of phosphate but ignored the effect of biofouling on the adsorption process especially used in the eutrophic water body. Herein, a novel MOF-supported carbon fibers (CFs) membrane with high regeneration and antifouling capability, was prepared by in-situ synthesis of well-dispersed MOF on CFs membrane, to remove phosphate from algae-rich water. The hybrid UiO-66-(OH)₂@Fe₂O₃@CFs membrane exhibits a maximum adsorption capacity of 333.3 mg g^-1 (pH 7.0) and excellent selectivity for phosphate sorption over coexisting ions. Moreover, the Fe₂O₃ nanoparticles anchored on the surface of UiO-66-(OH)₂ through 'phenol-Fe(III)' reaction can endow the membrane with the robust photo-Fenton catalytic activity, which improves long-term reusability even under algae-rich condition. After 4 times photo-Fenton regenerations, the regeneration efficiency of the membrane could remain 92.2%, higher than that of hydraulic cleaning (52.6%). Moreover, the growth of C. pyrenoidosa was significantly reduced by 45.8% within 20 days via metabolism inhibition due to membrane-induced P-deficient conditions. Hence, the developed UiO-66-(OH)₂@Fe₂O₃@CFs membrane holds significant prospects for large-scale application in phosphate sequestration of eutrophic water bodies.

Designing sustainable membrane-based water treatment via fouling control through membrane interface engineering and process developments

Membrane-based water treatment processes have been established as a powerful approach for clean water production. However, despite the significant advances made in terms of rejection and flux, provision of sustainable and energy-efficient water production is restricted by the inevitable issue of membrane fouling, known to be the major contributor to the elevated operating costs due to frequent chemical cleaning, increased transmembrane resistance, and deterioration of permeate flux. This review provides an overview of fouling control strategies in different membrane processes, such as microfiltration, ultrafiltration, membrane bioreactors, and desalination via reverse osmosis and forward osmosis. Insights into the recent advancements are discussed and efforts made in terms of membrane development, modules arrangement, process optimization, feed pretreatment, and fouling monitoring are highlighted to evaluate their overall impact in energy- and cost-effective water treatment. Major findings in four key aspects are presented, including membrane surface modification, modules design, process integration, and fouling monitoring. Among the above mentioned anti-fouling strategies, a large part of research has been focused on membrane surface modifications using a number of anti-fouling materials whereas much less research has been devoted to membrane module advancements and in-situ fouling monitoring and control. At the end, a critical analysis is provided for each anti-fouling strategy and a rationale framework is provided for design of efficient membranes and process for water treatment.

A high-flux antibacterial poly(amidoxime)-polyacrylonitrile blend membrane for highly efficient uranium extraction from seawater

Uranium is an important fuel for nuclear power, with 4.5 billion tons of it stored in the oceans, 1,000 times more than on land. Polymer membrane materials are widely used in the marine resources fields, due to their convenient collection, good separation and can work continuously. Herein, a poly(amidoxime)-polyacrylonitrile blend membrane (PCP) with high flux, excellent antibacterial properties and uranium adsorption performance has been prepared by using the phase inversion method, and the prepared membrane was used for highly efficient uranium extraction from seawater. In static adsorption experiments, the PCP membrane reached adsorption equilibrium after 48 h, and the adsorption capacity was 303.89 mg/g (C₀ =50 mg/L). In dynamic adsorption experiments, it was found that the lower flow rate and higher number of membrane layers were favorable for dynamic adsorption. In addition, the water flux of the PCP membrane was 7.4 times higher than that of the PAN membrane. The adsorption mechanism can be attributed to the chelation between amino and hydroxyl groups in CS, amidoxime group in poly(amidoxime) and uranyl ions. The simple preparation process coupled with the excellent adsorption performance indicated that the PCP membrane would be a promising material for the uranium extraction from seawater.

Research Trends in the Use of Polyaniline Membrane for Water Treatment Applications: A Scientometric Analysis

Polyaniline (PANI), which is a member of the family of electrically conducting polymers, has been widely discussed as a potential membrane for wastewater treatment. Although a steady growth in PANI literature was observed, analyzing PANI literature quantitatively is still a novelty. The main aim of this study is to unearth the current research status, global trends, and evolution of PANI membranes literature and their use in water treatment applications over time. For this purpose, a scientometric study was performed consisting of bibliometric and bibliographic analysis. A total of 613 entities were extracted from Web of Science published during the last 50 years and were analyzed to map trends based on leading peer-reviewed journals, publication records, leading research disciplines, countries, and organizations. The study shows that the number of annual publications increased exponentially from 2005 to 2020 and is expected to keep increasing in the current decade. The Journal of Membrane Science published the highest number of articles and was identified as the most-cited journal in the field. China, India, and the USA were observed as the top three research hubs. The top-ranked authors in the field were Wang, Jixiao, and Wang, Zhi. To find research trends, four different clusters of keywords were generated and analyzed. The top five most frequent keywords turn out to be polyaniline, water, performance, membranes, and nanoparticles. The analysis suggests that the application of nanotechnology for modifying PANI membranes (using nanoparticles, nanotubes, and graphene specifically) is the future of this field. This study elucidates the research streamline of the field that may serve as a quick reference for early career researchers and industries exploring this field.

Thin-Film Composite Membranes with a Hybrid Dimensional Titania Interlayer for Ultrapermeable Nanofiltration

The interfacial properties within a composite structure of membranes play a vital role in the separation properties and application performances. Building an interlayer can facilitate the formation of a highly selective layer as well as improve the interfacial properties of the composite membrane. However, it is difficult for a nanomaterial-based interlayer to increase the flux and retention of nanofiltration membranes simultaneously. Here, we report a nanofiltration membrane with a hybrid dimensional titania interlayer that exhibits excellent separation performance. The interlayer, composed of Fe-doped titania nanosheets and titania nanoparticles, helps the formation of an ultrathin (∼30 nm thick) and defect-free polyamide selective layer with an ideal nanostructure. The hybrid dimensional interlayer endows the membrane with a superior permeability and alleviates flux decline. In addition, the rigid interlayer framework on a PVDF support drastically improves the pressure resistance of nanofiltration membranes and shows negligible flux loss up to 1.5 MPa of pressure.

Bio-electron transfer modulated localized surface plasmon resonance biosensing with charge density monitoring

The analysis of reactant at different regions of the bioreaction interface is significant for the study on the influence of interface condition on bioreaction. In this study, we proposed a localized surface plasmon resonance (LSPR) biosensing platform for local charge density monitoring and corresponding analytes detection based on the bio-electron transfer modulation of plasmon resonance. Core-shell nanocomposites of polyaniline coated gold nanoparticles were synthesized for the enhanced sensitivity of plasmon resonance to applied electric potential. Tin-doped indium oxide (ITO) substrates modified with the nanocomposites were used as LSPR chip for optical and electrochemical measurements simultaneously. The charge sensitivity of LSPR was verified with external electric potential modulation theoretically and experimentally. Through layer-by-layer self-assembly immobilization of glucose oxidase (GOD) on the LSPR chips, the charge transfer monitoring during the bioreaction of glucose catalysis was further demonstrated based on the bio-electron transfer modulation of LSPR. By equivalent circuit method, the charge density of the LSPR chip were detected with optical extinction peak shifts, and the limit of detection was about 0.51 μC/cm². This bio-electron transfer modulated LSPR provides a promising approach for the detection of spatial charge densities and the evaluation of bioreaction substances at different region of single chip.