Approaching Superfoldable Thickness-Limit Carbon Nanofiber Membranes Transformed from Water-Soluble PVA

Dual recognition elements for selective determination of progesterone based on molecularly imprinted electrochemical aptasensor

A novel molecularly imprinted electrochemical aptasensor (MIEAS) was constructed for selective progesterone (P4) detection based on SnO₂-graphene (SnO₂-Gr) nanomaterial and gold nanoparticles (AuNPs). SnO₂-Gr with a large specific area and excellent conductivity improved the adsorption capacity of P4. Aptamer, as biocompatible monomer, was captured by AuNPs on modified electrode through Au-S bond. An electropolymerized molecularly imprinted polymer (MIP) film consisted of p-aminothiophenol as chemical functional monomer and P4 as template molecule. Due to the synergetic effect of MIP and aptamer towards P4, this MIEAS exhibited better selectivity than the sensor with MIP or aptamer as single recognition element. The prepared sensor had a low detection limit of 1.73 × 10^-15 M in a wide linear range from 10^-14 M to 10^-5 M. Satisfactory recovery obtained in tap water and milk samples proved that this sensor had great potential in environmental and food analysis.

Electrospun Carbon Nanofibers and Their Applications in Several Areas

Carbon nanofibers (CNFs) have a broad spectrum of applications, including sensor manufacturing, electrochemical catalysis, and energy storage. Among different manufacturing methods, electrospinning, due to its simplicity and efficiency, has emerged as one of the most powerful commercial large-scale production techniques. Numerous researchers have been attracted to improving the performance of CNFs and exploring new potential applications. This paper first discusses the working theory of manufacturing electrospun CNFs. Next, the current efforts in upgrading the properties of CNFs, such as pore architecture, anisotropy, electrochemistry, and hydrophilicity, are discussed. The corresponding applications due to the superior performances of CNFs are subsequently elaborated. Finally, the future development of CNFs is discussed.

A molecularly imprinted electrochemical sensor with dual functional monomers for selective determination of gatifloxacin

A molecularly imprinted electrochemical sensor was designed for the selective determination of gatifloxacin (GTX) based on dual functional monomers. Multi-walled carbon nanotube (MWCNT) enhanced the current intensity and zeolitic imidazolate framework 8 (ZIF8) provided a large surface area to produce more imprinted cavities. In the electropolymerization of molecularly imprinted polymer (MIP), p-aminobenzoic acid (p-ABA) and nicotinamide (NA) were used as dual functional monomers, and GTX was the template molecule. Taking [Fe(CN)6]3-/4- as an electrochemical probe, an oxidation peak on the glassy carbon electrode was located at about 0.16 V (vs. saturated calomel electrode). Due to the diverse interactions among p-ABA, NA, and GTX, the MIP-dual sensor exhibited higher specificity towards GTX than MIP-p-ABA and MIP-NA sensors. The sensor had a wide linear range from 1.00 × 10-14 to 1.00 × 10-7 M with a low detection limit of 2.61 × 10-15 M. Satisfactory recovery between 96.5 and 105% with relative standard deviation from 2.4 to 3.7% in real water samples evidenced the potential of the method in antibiotic contaminant determination.

Significantly Stabilizing Hydrogen Evolution Reaction Induced by Nb-Doping Pt/Co(OH)2 Nanosheets

High stability and efficiency of electrocatalysts are crucial for hydrogen evolution reaction (HER) toward water splitting in an alkaline media. Herein, a novel nano-Pt/Nb-doped Co(OH)₂ (Pt/NbCo(OH)₂ ) nanosheet is designed and synthesized using water-bath treatment and solvothermal reduction approaches. With nano-Pt uniformly anchored onto NbCo(OH)₂ nanosheet, the synthesized Pt/NbCo(OH)₂ shows outstanding electrocatalytic performances for alkaline HER, achieving a high stability for at least 33 h, a high mass activity of 0.65 mA µg^-1 Pt, and a good catalytic activity with a low overpotential of 112 mV at 10 mA cm^-2 . Both experimental and theoretical results prove that Nb-doping significantly optimizes the hydrogen adsorption free energy to accelerate the Heyrovsky step for HER, and boosts the adsorption of H₂ O, which further enhances the water activation. This study provides a new design methodology for the Nb-doped electrocatalysts in an alkaline HER field by facile and green way.

Centrifugally Spun PVA/PVP Based B, N, F Doped Carbon Nanofiber Electrodes for Sodium Ion Batteries

Owing to their high electrical conductivity, high surface area, low density, high thermal stability, and chemical stability, carbon nanofibers have been used in many fields, including energy storage, electromagnetic shielding, filtering, composites, sensors, and tissue engineering. Considering the environmental impact of petroleum-based polymers, it is vital to fabricate carbon nanofibers from environmentally-friendly materials using fast and safe techniques. PVA/PVP nanofibers were fabricated via centrifugal spinning and the effects of variations in the PVP content on the morphology and thermal properties of PVA/PVP-blend nanofibers were studied using SEM and DSC analyses. Moreover, the effects of carbonization conditions, including stabilization time, stabilization temperature, carbonization time, and carbonization temperature on the morphology and carbon yield, were investigated. Centrifugally spun PVA/PVP-based carbon nanofiber electrodes with an average fiber diameter around 300 nm are reported here for the first time. Furthermore, centrifugally spun PVA/PVP-based B, N, F-doped carbon nanofibers were fabricated by combining centrifugal spinning and heat treatment. Through B, N, F doping, CNFs demonstrated a high reversible capacity of more than 150 mAh/g in 200 cycles with stable cycling performance.

A molecularly imprinted electrochemical aptasensor based on zinc oxide and co-deposited gold nanoparticles/reduced graphene oxide composite for detection of amoxicillin

The molecularly imprinted electrochemical aptasensor was constructed based on co-deposition of zinc oxide and gold nanoparticles/reduced graphene oxide composite. Aptamer was used as a new kind of functional monomer and the aptamer-amoxicillin complex was formed by hydrogen bond. Then, the complex was fixed on the surface of the modified electrode by Au-S bond. Three-dimensional imprinted polymeric membrane was formed by electropolymerization of dopamine, and the imprinted sites with good specificity and affinity were formed after elution. Combined with the specificity of molecularly imprinted technology and the affinity of aptamer, the selective recognition of amoxicillin can be realized. Under the optimal experimental conditions, the linear range was from 10^-14 to 10^-8 M, and the detection limit was 3.3 × 10^-15 M. The sensor exhibited satisfactory selectivity, repeatability, and stability and was successfully used for 10^-9 M amoxicillin determination in real water and food samples.

Dual Carbon Design Strategy for Anodes of Sodium-Ion Battery: Mesoporous CoS2/CoO on Open Framework Carbon-Spheres with rGO Encapsulating

Transition metal sulfides and oxides with high theoretical capacities have been regarded as promising anode candidates for a sodium-ion battery (SIB); however, they have critical issues including sluggish electrochemical kinetics and poor long-term stability. Herein, a dual carbon design strategy is proposed to integrate with highly active heterojunctions to overcome the above issues. In this new design, CoS₂/CoO hollow dodecahedron heterojunctions are sandwiched between open framework carbon-spheres (OFCs) and a reduced graphene oxide (rGO) nanomembrane (OFC@CoS₂/CoO@rGO). The CoS₂/CoO heterojunctions effectively promote electron transfer on their surface and provide more electrochemical active sites through their hierarchical hollow structures assembled by nanodots. Meanwhile, the dual-carbon framework forms a highly conductive network that enables a better rate capability. More importantly, the dual carbon can greatly buffer volume expansion and stable reaction interfaces of electrode material during the charge/discharge process. Benefitting from their synergistical effects, the OFC@CoS₂/CoO@rGO electrode achieves a high reversible capacity of 460 mAh g^-1 at 0.05 A g^-1 and still maintains 205.3 mAh g^-1 even when current density is increased by 200 times when used as an anode material for SIBs. Their cycling property is also remarkable with a maintained capacity of 161 mAh g^-1 after 3500 charging/discharging cycles at a high current density of 1 A g^-1. The dual-carbon strategy is demonstrated to be effective for enhanced reaction kinetics and long-term cycling property, providing siginificant guidance for preparing other high-performance electrode materials.

A FRET Fluorescent Sensor for Ratiometric and Visual Detection of Sulfide Based on Carbon Dots and Silver Nanoclusters

In this work, the fluorescent sensor based on fluorescence resonance energy transfer (FRET) and electrostatic interaction (EI) was prepared for the ratiometric and visual detecting S^2-. The FRET fluorescent sensor consists of two fluorophores, with carbon dots (CDs) as energy donors and silver nanoclusters (Ag NCs) as acceptors. At 390 nm excitation, CDs and Ag NCs showed two well-separated peaks at 445 nm and 660 nm, separately. The existence of S^2- caused the red fluorescence at 660 nm to be quenched, whereas the blue fluorescence at 445 nm was restored, and the fluorescence color of the ratiometric sensor changed from pink to blue. It could be employed in ratiometric and visual detecting S^2-. The linear range of quantitative detection S^2- was 0.5-100 μM, and its detection limit was 0.35 μM. CDs-Ag NCs could be used for detecting S^2- in mineral water and tap water. The results showed that the FRET ratiometric fluorescent sensor exhibits good anti-interference and high selectivity for detecting S^2- in environmental water samples.

Near-infrared carbon dots for cell imaging and detecting ciprofloxacin by label-free fluorescence sensor based on aptamer

A label-free fluorescence sensor based on near-infrared carbon dots (NIR-CDs) and aptamer is described for the highly sensitive and selective detection of ciprofloxacin (CIP). NIR-CDs were synthesized from polyethyleneimine and reduced glutathione by one-step hydrothermal method. The electrostatic interaction between the positively charged carbon dots and the negatively charged aptamer resulted in fluorescence quenching. After the addition of CIP, the specific binding between CIP aptamer and CIP was stronger, resulting in fluorescence recovery. Under the optimal experimental conditions, the recovered fluorescence intensity has a linear relationship with the concentration of CIP in the range 0.5-800 ng/mL, and the detection limit is 0.167 ng/mL. The prepared carbon dots have excellent optical properties and biocompatibility, and due to their emission characteristics in the near-infrared window, they can be used for biological imaging, which has also been confirmed in the experiment. The feasibility of the label-free fluorescence sensor for the detection of CIP is also proved by confocal fluorescence imaging. The detection results of CIP determination in milk by this sensor are satisfactory, indicating that the developed sensor has great application potential.

Numerical Simulation of Temperature Variations during the Application of Safety Protocols in Magnetic Particle Hyperthermia

Unavoidably, magnetic particle hyperthermia is limited by the unwanted heating of the neighboring healthy tissues, due to the generation of eddy currents. Eddy currents naturally occur, due to the applied alternating magnetic field, which is used to excite the nanoparticles in the tumor and, therefore, restrict treatment efficiency in clinical application. In this work, we present two simply applicable methods for reducing the heating of healthy tissues by simultaneously keeping the heating of cancer tissue, due to magnetic nanoparticles, at an adequate level. The first method involves moving the induction coil relative to the phantom tissue during the exposure. More specifically, the coil is moving symmetrically—left and right relative to the specimen—in a bidirectional fashion. In this case, the impact of the maximum distance (2–8 cm) between the coil and the phantom is investigated. In the second method, the magnetic field is applied intermittently (in an ON/OFF pulsed mode), instead of the continuous field mode usually employed. The parameters of the intermittent field mode, such as the time intervals (ON time and OFF time) and field amplitude, are optimized based on the numerical assessment of temperature increase in healthy tissue and cancer tissue phantoms. Different ON and OFF times were tested in the range of 25–100 s and 50–200 s, respectively, and under variable field amplitudes (45–70 mT). In all the protocols studied here, the main goal is to generate inside the cancer tissue phantom the maximum temperature increase, possible (preferably within the magnetic hyperthermia window of 4–8 °C), while restricting the temperature increase in the healthy tissue phantom to below 4 °C, signifying eddy current mitigation.

A Significant Fluorescent Aptamer Sensor Based on Carbon Dots and Graphene Oxide for Highly Selective Detection of Progesterone

In this paper, a fluorescent aptamer sensor was constructed based on the carbon dots (CDs) and graphene oxide (GO). This sensor combines the excellent fluorescence performance of CDs with the high specificity of aptamer, which can detect progesterone (P₄) with high sensitivity and selectivity. In the absence of P₄, the CDs-aptamer system and GO form a fluorescence resonance energy transfer process (FRET), which quenches the fluorescence of the CDs. When P₄ is added, the aptamer specifically binds to it, resulting the fluorescence of the CDs is recovered. At optimal conditions, the fluorescence intensity recovered by the CDs has a linear relationship with the concentration of P₄ in the range of 0.1-120 nM and the detection limit is 3.3 × 10^-11 M. Besides, the sensor has satisfactory detection results of P₄ in milk, indicating that constructed method has enormous potential for application in food safety.

Biomimetic manganese-eumelanin nanocomposites for combined hyperthermia-immunotherapy against prostate cancer

Pro-tumoral and immunosuppressive M2-like tumor-associated macrophages (TAMs) contribute to tumor progression, recurrence and distal metastasis. However, current TAMs-modulating therapeutic strategies often encounter challenges including insufficient immune activation, weak antigen presentation ability and unsatisfactory antitumor immune performance. Herein, cyclic RGD peptide functionalized and manganese doped eumelanin-like nanocomposites (RMnMels) are reported for combined hyperthermia-immunotherapy against PC3 prostate cancer. The RMnMels could promote M2-to-M1 macrophage repolarization via scavenging multiple reactive oxygen species and remodeling the immunosuppressive tumor microenvironment. Following near-infrared light irradiation, RMnMels-mediated thermal ablation not only could destroy tumor cells directly, but also elicit the release of damage associated molecular patterns and tumor-associated antigens, provoking robust tumor immunogenicity and strong antitumor immune responses. The results showed that RMnMels could effectively scavenge reactive oxygen species and promote M2-to-M1 macrophage repolarization both in vitro and in vivo. Synergistically enhanced anti-tumor therapeutic efficacy was achieved following single administration of RMnMels plus single round of laser irradiation, evidenced by decreased primary tumor sizes and decreased number of distant liver metastatic nodules. The as-developed RMnMels may represent a simple and high-performance therapeutic nanoplatform for immunomodulation and enhanced antitumor immune responses.

An electrochemical sensor based on electrospun MoS2@SnO2 modified carbon nanofiber composite materials for simultaneously detection ofphenacetin and indomethacin

SnO 2 -CNF was prepared by coaxial blending technology, and MoS 2 was grown uniformly on SnO 2 -CNF composite by combining hydrothermal post-treatment step. The uniform distribution of MoS 2 on one-dimensional SnO 2 -CNF can effectively establish a layered three-dimensional structure. So that the prepared MoS 2 coated SnO 2 -CNF composite material has higher surface area and more active sites to obtain better electrochemical performance. We constructed an electrochemical sensor within the composite material with enhanced performance to realize the simultaneous and highly sensitive detection of phenacetin and indomethacin for the first time. The sensor proves the linear ranges of 0.050-7200 μM and 0.05-500 μM respectively, and the detection limits were 0.016 μM and 0.013 μM. And the sensor has good anti-interference ability and stability, which also achieves good recovery rate in the actual sample detection .

Bioinspired Nanocomposites with Self-Adaptive Stress Dispersion for Super-Foldable Electrodes

In flexible electronics, appropriate inlaid structures for stress dispersion to avoid excessive deformation that can break chemical bonds are lacking, which greatly hinders the fabrication of super-foldable composite materials capable of sustaining numerous times of true-folding. Here, mimicking the microstructures of both cuit cocoon possessing super-flexible property and Mimosa leaf featuring reversible scatheless folding, super-foldable C-web/FeOOH-nanocone (SFCFe) conductive nanocomposites are prepared, which display cone-arrays on fiber structures similar to Mimosa leaf, as well as non-crosslinked junctions, slidable nanofibers, separable layers, and compressible network like cuit cocoon. Remarkably, the SFCFe can undergo over 100 000 times of repeated true-folding without structural damage or electrical conductivity degradation. The mechanism underlying this super-foldable performance is further investigated by real-time scanning electron microscopy folding characterization and finite-element simulations. The results indicate its self-adaptive stress-dispersion mechanism originating from multilevel biomimetic structures. Notably, the SFCFe demonstrates its prospect as a super-foldable anode electrode for aqueous batteries, which shows not only high capacities and satisfactory cycling stability, but also completely coincident cyclic voltammetry and galvanostatic charge-discharge curves throughout the 100 000 times of true-folding. This work reports a mechanical design considering the self-adaptive stress dispersion mechanism, which can realize a scatheless super-foldable electrode for soft-matter electronics.