Gap Plasmon Resonance in a Suspended Plasmonic Nanowire Coupled to a Metallic Substrate

Multifunctional DNA scaffold mediated gap plasmon resonance: Application to sensitive PD-L1 sensor

The introduction of noble metal nanoparticles with good LSPR characteristics can greatly improve the sensitivity of SPR through resonance coupling effect. The plasma resonance response and optical properties of film coupling nanoparticle systems largely depends on the ingenious design of gap structures. Nucleic acid nanostructures have good stability, flexibility, and high biocompatibility, making them ideal materials for gap construction. 2D MOF (Cu-Tcpp) has a large conjugated surface similar to graphene, which can provide a stable substrate for the directional fixation of nucleic acid nanostructures. However, research on gap coupling plasmon based on nucleic acid nanostructures and 2D MOF is still rarely reported. By integrating the advantages of Cu-Tcpp assembled film and DNA tetrahedron immobilization, a nano gap with porous scaffold structure between the gold film and gold nanorod was build. The rigidity of DNA tetrahedron can precisely control the gap size, and its unique programmability allows us to give the coupling structure greater flexibility through the design of nucleic acid chain. The experimental results and FDTD simulation show that the film coupling nanoparticle systems constructed with DNA tetrahedrons greatly enhance the electric field strength near the chip surface and effectively improve the sensitivity of SPR. This research shows the huge potential of nucleic acid nanomaterials in the construction of SPR chip surface microstructures.

All-Graphene-Contact Electrically Pumped On-Demand Transferrable Nanowire Source

On-demand NW light sources in a photonic integrated circuit (PIC) have faced several practical challenges. Here, we report on an all-graphene-contact, electrically pumped, on-demand transferrable NW source that is fabricated by implementing an all-graphene-contact approach in combination with a highly accurate microtransfer printing technique. A vertically p-i-n-doped top-down-fabricated semiconductor NW with optical gain structures is electrically pumped through the patterned multilayered graphene contacts. Electroluminescence (EL) spectroscopy results reveal that the electrically driven NW device exhibits strong EL emission between the contacts and displays waveguiding properties. Further, a single NW device is precisely integrated into an existing photonic waveguide to perform light coupling and waveguiding experiments. Three-dimensional numerical simulation results show a good agreement with experimental observations. We believe that our all-graphene-contact approach is readily applicable to various micro/nanostructures and devices, which facilitates stable electrical operation and thus extends their practical applicability in compact integrated circuits.

Suppression of gap plasmon resonance for high-responsivity metal-insulator-metal near-infrared hot-electron photodetectors

Binary metal layers composed of a grating and a thin film are designed for high-responsivity metal-insulator-metal (MIM) near-infrared hot-electron photodetectors (HEPDs). The binary metal grating structure HEPDs demonstrate a strong asymmetrical optical absorption and result in a high current responsivity. In our devices, the top and bottom absorption ratio is as high as 76:1, much higher than that in the traditional grating structure HEPDs. The maximum zero-biased responsivity is 0.585 mA/W at 1550 nm by employing a five-step electrical model, which is 3.42 times that of the traditional silver grating structure devices. Simply changing the grating period enables spectrally selective photodetection covering a wide range of 500 nm at the near-infrared band with net absorption higher than 0.95 and linewidths narrower than 0.7 meV.

A Thermal Tuning Meta-Duplex-Lens (MDL): Design and Characterization

Multifunctional metasurfaces play an important role in the development of integrated optical paths. However, some of the realizations of current multifunctional metasurface devices depend on polarization selectivity, and others change the polarization state of the outgoing light. Here, based on vanadium dioxide (VO₂) phase change material, a strategy to design a meta-duplex-lens (MDL) is proposed and numerical simulation calculations demonstrate that at low temperature (about 300 K), VO₂ behaves as a dielectric so that the MDL can act as a transmission lens (transmission efficiency of 87.6%). Conversely, when VO₂ enters the metallic state (about 355 K), the MDL has the ability to reflect and polymerize electromagnetic waves and works as a reflection lens (reflection efficiency of 85.1%). The dielectric waveguide and gap-surface plasmon (GSP) theories are used in transmission and reflection directions, respectively. In order to satisfy the coverage of the phase gradient in the range of 2π in both cases, we set the antenna as a nanopillar with a high aspect ratio. It is notable that, via symmetrical antennas acting in concert with VO₂ phase change material, the polarization states of both the incident light and the outgoing light are not changed. This reversible tuning will play a significant role in the fields of imaging, optical storage devices, communication, sensors, etc.

Rewritable full-color computer-generated holograms based on color-selective diffractive optical components including phase-change materials

We propose rewritable full-color computer-generated holograms (CGHs) based on color-selective diffraction using the diffractive optical component with the resonant characteristic. The structure includes an ultrathin layer of phase-change material Ge2Sb2Te5 (GST) on which a spatial binary pattern of amorphous and crystalline states can be recorded. The CGH patterns can be easily erased and rewritten by the pulsed ultraviolet laser writing technique owing to the thermally reconfigurable characteristic of GST. We experimentally demonstrate that the fabricated CGH, having a fine pixel pitch of 2 μm and a size of 32.8 × 32.8 mm2, reconstructs the three-dimensional holographic images. In addition, the feasibility of the rewritable property is verified by erasing and rewriting part of the CGH.

Sub-diffraction spatial mapping of nanomechanical modes using a plasmomechanical system

Plasmomechanical systems - formed by introducing a mechanically compliant gap between metallic nanostructures - produce large optomechanical interactions that can be localized to deep subwavelength volumes. This unique ability opens a new path to study optomechanics in nanometer-scale regimes inaccessible by other methods. We show that the localized optomechanical interactions produced by plasmomechanics can be used to spatially map the displacement modes of a vibrating nanomechanical system with a resolution exceeding the diffraction limit. Furthermore, we use white light illumination for motion transduction instead of a monochromatic laser, and develop a semi-analytical model matching the changes in optomechanical coupling constant and motion signal strength observed in a broadband transduction experiment. Our results clearly demonstrate the key benefit of localized and broadband performance provided by plasmomechanical systems, which may enable future nano-scale sensing and wafer-scale metrology applications.

Ultrabroadband absorber based on single-sized embedded metal-dielectric-metal structures and application of radiative cooling

The realization of ultrabroadband absorption is a fundamental part of a thermal emitter, especially in the application of radiative cooling. This study involved proposing and systematically analyzing a novel structure termed as an embedded metal-dielectric-metal (EMDM) structure. The results in the case of an individual resonator indicated that the EMDM resonator displayed a broader full width at half maximum (FWHM) that was 1.9 times that of the metal-dielectric-metal (MDM) resonator due to mode matching at the terminated end and enhanced scattering intensity. With respect to the case of periodic resonators, single-sized periodic EMDM resonators are employed to achieve a broader FWHM that is 3.8 times that of the MDM resonators. In addition, a strong coupling effect is confirmed between localized MDM and hybrid modes. An application of lossy-dielectric based periodic three-dimensional EMDM resonators indicated that an average absorptivity of 0.85 in the entire atmospheric window (8-13 μm). The results revealed the potential of EMDM structures for radiative cooling devices and other ultrabroadband absorbers.

Plasmon-controlled excitonic emission from vertically-tapered organic nanowires

Organic molecular nanophotonics has emerged as an important avenue to harness molecular aggregation and crystallization on various functional platforms to obtain nano-optical devices. To this end, there is growing interest to combine organic molecular nanostructures with plasmonic surfaces and interfaces. Motivated by this, herein we introduce a unique geometry: vertically-tapered organic nanowires grown on a plasmonic thin film. A polarization-sensitive plasmon-polariton on a gold thin-film was harnessed to control the exciton-polariton propagation and subsequent photoluminescence from an organic nanowire made of diaminoanthraquinone (DAAQ) molecules. We show that the exciton-polariton emission from individual DAAQ nanowires can be modulated up to a factor of 6 by varying the excitation polarization state of surface plasmons. Our observations were corroborated with full-wave three-dimensional finite-difference time-domain calculations performed on vertically-tapered nanowire geometry. Our work introduces a new optical platform to study coupling between propagating plasmons and propagating excitons, and may have implications in emerging fields such as hybrid-polariton based light emitting devices and vertical-cavity nano-optomechanics.

Full-Color Subwavelength Printing with Gap-Plasmonic Optical Antennas

Metallic nanostructures can be designed to effectively reflect different colors at deep-subwavelength scales. Such color manipulation is attractive for applications such as subwavelength color printing; however, challenges remain in creating saturated colors with a general and intuitive design rule. Here, we propose a simple design approach based on all-aluminum gap-plasmonic nanoantennas, which is capable of designing colors using knowledge of the optical properties of the individual antennas. We demonstrate that the individual-antenna properties that feature strong light absorption at two distinct frequencies can be encoded into a single subwavelength-pixel, enabling the creation of saturated colors, as well as a dark color in reflection, at the optical diffraction limit. The suitability of the designed color pixels for subwavelength printing applications is demonstrated by showing microscopic letters in color, the incident polarization and angle insensitivity, and color durability. Coupled with the low cost and long-term stability of aluminum, the proposed design strategy could be useful in creating microscale images for security purposes, high-density optical data storage, and nanoscale optical elements.