Spin-Selective Transmission in Chiral Folded Metasurfaces

Reconfigurable transmissive metasurface with a combination of scissor and rotation actuators for independently controlling beam scanning and polarization conversion

Polarization conversion and beam scanning metasurfaces are commonly used to reduce polarization mismatch and direct electromagnetic waves in a specific direction to improve the strength of a wireless signal. However, identifying suitable active and mechanically reconfigurable metasurfaces for polarization conversion and beam scanning is a considerable challenge, and the reported metasurfaces have narrow scanning ranges, are expensive, and cannot be independently controlled. In this paper, we propose a reconfigurable transmissive metasurface combined with a scissor and rotation actuator for independently controlling beam scanning and polarization conversion functions. The metasurface is constructed with rotatable unit cells (UCs) that can switch the polarization state between right-handed (RHCP) and left-handed circular polarization (LHCP) by flipping the UCs to reverse their phase variation. Moreover, independent beam scanning is achieved using the scissor actuator to linearly change the distance between the UCs. Numerical and experimental results confirm that the proposed metasurface can perform beam scanning in the range of 28° for both the positive and negative regions of a radiation pattern (RHCP and LHCP beams) at an operational frequency of 10.5 GHz.

Realizing Minimally Perturbed, Nonlocal Chiral Metasurfaces for Direct Stokes Parameter Detection

Recent development in nonlocal resonance based chiral metasurfaces draws great attention due to their abilities to strongly interact with circularly polarized light at a relatively narrow spectral bandwidth. However, there still remain challenges in realizing effective nonlocal chiral metasurfaces in optical frequency due to demanding fabrications such as 3D-multilayered or nanoscaled chiral geometry, which, in particular, limit their applications to polarimetric detection with high-Q spectra. Here, we study the underlying working principles and reveal the important role of the interaction between high-Q nonlocal resonance and low-Q localized Mie resonance in realizing effective nonlocal chiral metasurfaces. Based on the working principles, we demonstrate one of the simplest types of nonlocal chiral metasurfaces which directly detects a set of Stokes parameters without the numerical combination of transmitted values presented from typical Stokes metasurfaces. This is achieved by minimally altering the geometry and filling ratio of every constituent nanostructure in a unit cell, facilitating consistent-sized nanolithography for all samples experimentally at a targeted wavelength with relatively high-Q spectra. This work provides an alternative design rule to realizing effective polarimetric metasurfaces and the potential applications of nonlocal Stokes parameters detection.

High-Speed Optoelectronic Nonvolatile Memory Based on van der Waals Heterostructures

High-performance optoelectronic nonvolatile memory is promising candidate for next-generation information memory devices. Here, a floating-gate memory is constructed based on van der Waals heterostructure, which exhibits a large storage window ratio (≈75.5%) and an extremely high on/off ratio (107 ), as well as an ultrafast electrical writing/erasing speed (40 ns). The enhanced performance enables as-fabricated devices to present excellent multilevel data storage, robust retention, and endurance performance. Moreover, stable optical erasing operations can be achieved by illuminating the device with a laser pulse, showcasing outstanding optoelectronic storage performance (optical erasing speed ≈ 2.3 ms). The nonvolatile and high-speed characteristics of these devices hold significant potential for the integration of high-performance nonvolatile memory.

Meta-Atom Coupling Induced Chiral Hotspot in Silicon Nitride Staggered Nanorods Meta-Surface

Dielectric meta-surfaces have emerged as an effective way for fabricating chiral optical devices, and the chiral meta-surfaces are usually constituted by periodic chiral meta-atom structures. Here, we report a chiral meta-surface consisting of nonchiral silicon nitride rectangular nanorods. The chiral hotspots are generated between the staggered nanorods due to the coupling between the two nearest neighbor nanorod units. 14.6% macroscopic circular dichroism (CD) is achieved experimentally with larger area staggered nanorods. Meanwhile, we demonstrate that the wavelength tuning capability of this design from 696 to 820 nm by simply modulating the overlap length of nanorods. Our work highlights the mechanisms for CD hotspot generation without complex chiral units, which paves a novel way for future on-chip photon-spin selective devices.

Observation of intrinsic chiral bound states in the continuum

Photons with spin angular momentum possess intrinsic chirality, which underpins many phenomena including nonlinear optics¹, quantum optics², topological photonics³ and chiroptics⁴. Intrinsic chirality is weak in natural materials, and recent theoretical proposals^5-7 aimed to enlarge circular dichroism by resonant metasurfaces supporting bound states in the continuum that enhance substantially chiral light-matter interactions. Those insightful works resort to three-dimensional sophisticated geometries, which are too challenging to be realized for optical frequencies⁸. Therefore, most of the experimental attempts^9-11 showing strong circular dichroism rely on false/extrinsic chirality by using either oblique incidence^9,10 or structural anisotropy¹¹. Here we report on the experimental realization of true/intrinsic chiral response with resonant metasurfaces in which the engineered slant geometry breaks both in-plane and out-of-plane symmetries. Our result marks, to our knowledge, the first observation of intrinsic chiral bound states in the continuum with near-unity circular dichroism of 0.93 and a high quality factor exceeding 2,663 for visible frequencies. Our chiral metasurfaces may lead to a plethora of applications in chiral light sources and detectors, chiral sensing, valleytronics and asymmetric photocatalysis.

Nanomembrane-assembled nanophotonics and optoelectronics: from materials to applications

Nanophotonics and optoelectronics are the keys to the information transmission technology field. The performance of the devices crucially depends on the light-matter interaction, and it is found that three-dimensional (3D) structures may be associated with strong light field regulation for advantageous application. Recently, 3D assembly of flexible nanomembranes has attracted increasing attention in optical field, and novel optoelectronic device applications have been demonstrated with fantastic 3D design. In this review, we first introduce the fabrication of various materials in the form of nanomembranes. On the basis of the deformability of nanomembranes, 3D structures can be built by patterning and release steps. Specifically, assembly methods to build 3D nanomembrane are summarized as rolling, folding, buckling and pick-place methods. Incorporating functional materials and constructing fine structures are two important development directions in 3D nanophotonics and optoelectronics, and we settle previous researches on these two aspects. The extraordinary performance and applicability of 3D devices show the potential of nanomembrane assembly for future optoelectronic applications in multiple areas.

Chiral Third-Harmonic Metasurface for Multiplexed Holograms

Chiral nonlinear metasurfaces could natively synergize nonlinear wavefront manipulation and circular dichroism, offering enhanced capacity for multifunctional and multiplexed nonlinear metasurfaces. However, it is still quite challenging to simultaneously enable strong chiral response, precise wavefront control, high nonlinear conversion efficiency, and independent functions on spins and chirality. Here, we propose and experimentally demonstrate multiplexed third-harmonic (TH) holograms with four channels based on a chiral Au-ZnO hybrid metasurface. Specifically, the left- and right-handed circularly polarized (LCP and RCP) components of the TH holographic images can be designed independently under the excitation of an LCP (or RCP) fundamental beam. In addition, the TH conversion efficiency is measured to be as large as 10^-5, which is 8.6 times stronger than that of a bare ZnO film with the same thickness. Thus, our work provides a promising platform for realizing efficient and multifunctional nonlinear nanodevices.

Ultra-broadband and high-efficiency planar chiral metamaterial

To date, the helix-like assemblies are known for delivering the most broadband chiroptic response; however, as their dimensions shrink to the nanoscale, it becomes increasingly difficult to realize three-dimensional (3D) building blocks and accurate alignments. In addition, a continuous optical channel requirement hinders the downsizing for integrated photonics. Here, we introduce an alternative approach based on two assembled layers of dielectric-metal nanowires to demonstrate that chiroptic effects similar to helix-like metamaterials can be realized with an ultracompact planar structure by creating dissymmetry using orientation and making use of interference phenomena. We constructed two polarization filters for the near-(NIR) and the mid-infrared (MIR) spectrums that exhibit a broadband (0.835-2.11 µm and 3.84-10.64 µm) chiroptic response with maximum transmission and circular dichroism (CD) of approximately 0.965 and extinction ratio > 600. The structure is easy to fabricate, independent of alignments, and scalable from the visible to MIR range for applications including imaging, medical diagnostics, polarization conversion, and optical communication.

Angle-selective chiral absorption induced by diffractive coupling in metasurfaces

Here we report that a simple chiral metasurface with twisted metallic cut-wire arrays enables highly efficient and continuously tunable chiral absorption over a broad spectral range by scanning the incidence angle over a few degrees. The angle-selective chiral absorption results from the surface plasmon resonance (SPR) excited by diffractive effects of the metasurface. The diffraction-assisted chiral metasurface provides a straightforward strategy for achieving dynamically tunable chiral devices and offers intriguing possibilities for various applications in on-chip chiral detectors/emitters, chiral spectrometers, chiral lasers, and so on.

Single-Layer Achiral Metasurface with Independent Amplitude-Phase Control for Both Left-Handed and Right-Handed Circular Polarizations

Amplitude-phase control for circular polarized (CP) waves is experiencing a research upsurge in electromagnetics owing to the kaleidoscopic electromagnetic responses and promising application prospects of circular polarizations, and chiral metasurfaces are more facile to achieve a series of intriguing chiral phenomena than natural materials. However, it is difficult for most existing chiral metasurfaces to independently tailor the amplitude and phase of left-handed circular polarized and right-handed circular polarized waves at the same frequency as they suffer the drawbacks of large thickness, multiple layers, and complex structure. Herein, an innovative strategy of single-layer achiral metasurfaces of thickness 0.13λ0 is proposed to independently and simultaneously manipulate the amplitude and phase of orthogonal CP waves. As a proof of concept, an amplitude and phase controlled dual-channel meta-hologram is designed to reconstruct diverse images with high fidelity under orthogonal CP illumination, and the simulated and experimental results collectively validate the availability of our methodology. Significantly, the meta-hologram is also applicable to full polarization states according to the decomposition of electromagnetic waves. The inspiring design of single-layer achiral metasurfaces provides a simple and effective approach to explore chiral effects, and they possess enormous application potential in multitudinous microwave devices.

Dual-band chiral metasurface for independent controls of spin-selective reflections

The development of chiral metasurfaces with spin-selective reflection or transmission provides a new way to control the circularly polarized (CP) waves. However, it is still a great challenge to independently manipulate the polarization, frequency, and phase of the spin-selective reflected waves in different operating bands, which may have potential applications in improving the data capacity of microwave and optical communication systems. Here, a dual-band chiral metasurface is proposed to generate gigantic intrinsic chirality with strong circular dichroism (CD) in two different frequency bands by piecing two typical mono-chiral units together. The polarization, frequency and phase of the spin-selective reflected waves can also be independently designed in the two operating bands by adjusting the configuration of the chiral unit structures. Based on the proposed chiral structures, a dual-band chiral metasurface with spin-selective anomalous reflections is designed and demonstrated by both simulations and experiments. The results show that the polarization of spin-selective reflected waves can be customized by selecting appreciate chiral structures, while the wavefront of the spin-selective reflected waves can be further controlled by designing their arrangement.

A physical interpretation of coupling chiral metaatoms

The physical origins of chiroptical responses from artificial optically active media are significant for developing high-performance circular dichroism (CD) spectroscopic techniques. Here, we present a biorthogonal approach based on temporal coupled-mode theory to unravel the underlying physics of chiral metasurfaces. Equipped with physically meaningful parameters, this approach inherits the intrinsic properties of open optical cavities, including time-reversal symmetry and non-Hermitian Hamiltonians, which are found to be in excellent agreement with numerical results. Remarkably, it identifies that the intrinsic chirality of coupled chiral nanocavities arises from (i) the asymmetric coupling between interlayer cross-polarized resonant modes and (ii) a coherent interference between doubly degenerate states. Based on this formalism, a critical coupling condition capable of achieving zero transmission for circularly polarized light is proposed.

Switchable Chiral Metasurface for Terahertz Anomalous Reflection Based on Phase Change Material

A switchable chiral metasurface based on a phase change material Ge2Sb2Te5, which can switch between a right-handed circularly polarized mirror and a left-handed circularly polarized mirror, is theoretically discussed. When the conductivity of Ge2Sb2Te5 σ is 0 S/m, the metasurface will reflect incident right-handed circularly polarized light and absorb incident left-handed circularly polarized light at 0.76 THz. As σ is set to 3 × 105 S/m, the response of the metasurface to circularly polarized light will be reversed. That is, it reflects the incident left-handed circularly polarized light and absorbs the incident right-handed circularly polarized light at 0.66 THz. The circular dichroism is from 76% to −64%. Then, we also study the performance of the mirror structure of the initial metasurface. By simulating the reflected spectra with different conductivities and the surface current distribution, the reason for the switchable function is clear. Moreover, the switchable chiral metasurface can be applied in spin-selective beam deflectors, which is proven by simulation. This work provides a new strategy for the development of tunable chiral devices.

Engineering Stress in Thin Films: An Innovative Pathway Toward 3D Micro and Nanosystems

Transformation of conventional 2D platforms into unusual 3D configurations provides exciting opportunities for sensors, electronics, optical devices, and biological systems. Engineering material properties or controlling and modulating stresses in thin films to pop-up 3D structures out of standard planar surfaces has been a highly active research topic over the last decade. Implementation of 3D micro and nanoarchitectures enables unprecedented functionalities including multiplexed, monolithic mechanical sensors, vertical integration of electronics components, and recording of neuron activities in 3D organoids. This paper provides an overview on stress engineering approaches to developing 3D functional microsystems. The paper systematically presents the origin of stresses generated in thin films and methods to transform a 2D design into an out-of-plane configuration. Different types of 3D micro and nanostructures, along with their applications in several areas are discussed. The paper concludes with current technical challenges and potential approaches and applications of this fast-growing research direction.

High-Efficiency Spin-Related Vortex Metalenses

In this paper, one spin-selected vortex metalens composed of silicon nanobricks is designed and numerically investigated at the mid-infrared band, which can produce vortex beams with different topological charges and achieve different spin lights simultaneously. Another type of spin-independent vortex metalens is also designed, which can focus the vortex beams with the same topological charge at the same position for different spin lights, respectively. Both of the two vortex metalenses can achieve high-efficiency focusing for different spin lights. In addition, the spin-to-orbital angular momentum conversion through the vortex metalens is also discussed in detail. Our work facilitates the establishment of high-efficiency spin-related integrated devices, which is significant for the development of vortex optics and spin optics.

Metasurface circular polarizer based on rotational symmetric nanoholes

A circular polarizer is proposed based on a single layered metasurface. This metasurface circular polarizer is composed of L-shaped nanoholes etched on the silver film. The L-shaped nanoholes are rotational symmetric, and the special symmetric structure determines the polarization selection transmission of the metasurface. The theoretical analysis elaborates the design process of the metasurface circular polarizer. The proposed metasurface circular polarizers have good polarization selective transmittance, and more interestingly, they take on the opposite circular dichroism at different wavebands. The numerical simulations and experiment measurement confirm the circular dichroism of the proposed circular polarizers. The compact design, ultrathin thickness and available performance can expand the applications of the metasurface circular polarizers in the integrated optics.

Self-Isolated Raman Lasing with a Chiral Dielectric Metasurface

The light sources that power photonic networks are small and scalable, but they also require the incorporation of optical isolators that allow light to pass in one direction only, protecting the light source from damaging backreflections. Unfortunately, the size and complex integration of optical isolators makes small-scale and densely integrated photonic networks infeasible. Here, we overcome this limitation by designing a single device that operates both as a coherent light source and as its own optical isolator. Our design relies on high-quality-factor dielectric metasurfaces that exhibit intrinsic chirality. By carefully manipulating the geometry of the constituent silicon metaatoms, we design three-dimensionally chiral modes that act as optical spin-dependent filters. Using spin-polarized Raman scattering together with our chiral metacavity, we demonstrate Raman lasing in the forward direction, while the lasing action is suppressed by over an order of magnitude for reflected light. Our high-Q chiral metasurface design presents a new approach toward compactly isolating integrated light sources by directly tailoring the emission properties of the light source itself.

Dynamically reversible and strong circular dichroism based on Babinet-invertible chiral metasurfaces

We propose a Babinet-invertible chiral metasurface for achieving dynamically reversible and strong circular dichroism (CD). The proposed metasurface is composed of a VO₂-metal hybrid structure, and when VO₂ transits between the dielectric state and the metallic state, the metasurface unit cell switches between complementary structures that are designed according to Babinet's principle. This leads to a large and reversible CD tuning range between ±0.5 at 0.97 THz, which is larger than the one found in the literature. We attribute the CD effect to extrinsic chirality of the proposed metasurface. We envision that the Babinet-invertible chiral metasurface proposed here will advance the engineering of active and tunable chiro-optical devices and promote their applications.

Phase-Transition Optical Activity in Chiral Metamaterials

Optical activity from chiral metamaterials is both fundamental in electrodynamics and useful for polarization control applications. It is normally expected that due to infinitesimally small thickness, two-dimensional (2D) planar metamaterials cannot introduce large optical rotations. Here, we present a new mechanism to achieve strong optical rotation up to 90° by evoking phase transition in the 2D metamaterials through tuning coupling strength between meta-atoms. We analytically elucidate such phenomenon by developing a model of phase-transition coupled-oscillator array. And we further corroborate our ideas with both numerical simulations and experiments. Our findings would pave a new way for applying the concept of phase transition in photonics for designing novel optical devices for strong polarization controls and other novel applications.

Reconfigurable metamaterial for chirality switching and selective intensity modulation

A reconfigurable metamaterial for chirality switching and selective intensity modulation is demonstrated experimentally. Through simple folding strategy, nonchiral state, single-band chiral states and dual-bands chiral states can be switched. Circular dichroism up to 0.94 is measured with folding angles of 70°. Meanwhile, selective intensity modulation is realized by the combined effect of folding angle and incident angle. The transmission intensity of circularly polarized waves can be modulated by more than 90% at any selected resonating frequency between 8.97 and 10.73 GHz. This work will benefit the researches of foldable metamaterials and have potential applications in the field of reconfigurable devices.

Planar Achiral Metasurfaces-Induced Anomalous Chiroptical Effect of Optical Spin Isolation

Planar chiral structures respond differently for oppositely handed incident light, and thus can produce extraordinary chiroptical effects such as circular conversion dichroism (CCD) and asymmetric transmission (AT). Such chiroptical effects are powerful tools to realize the fundamental principle of optical spin isolation, which leads to a plethora of applications such as optical conversion diodes, chiral imaging, and sensing. Here, we demonstrate the chiroptical effects of simultaneous CCD and AT through meticulously designed single-layered achiral nanofins. Our metamolecule consists of four achiral hydrogenated amorphous silicon (a-Si:H) nanofins that are carefully oriented and optimized to exhibit considerable CCD and AT. The device demonstrates a circular conversion dichroism of 55% and an asymmetric transmission of 58% at a wavelength of 633 nm. Right-hand circularly polarized light (RHCP) is completely absorbed, while left-hand circularly polarized light (LHCP) is transmitted with a polarization conversion, making it a perfect circular polarization wave isolator with negligible backscattering (due to low reflectance). This unique design and its underlying working mechanism are described comprehensively with three different techniques. These methods validate the proposed design and its methodology. For practical applications such as imaging, the proposed design realizes the Pancharatnam-Berry (PB) phase, achieving a 0-2π phase coverage for transmitted circular polarization. For the proof of concept, a metahologram is designed and demonstrated by employing the achieved full-phase control. The measured response of the fabricated metadevice not only validates the CCD and AT but also exhibits a simulated polarization conversion efficiency of up to 71% and measured efficiency up to 52%, comparable to state-of-the-art metahologram demonstrations.

Chirality Transfer from Sub-Nanometer Biochemical Molecules to Sub-Micrometer Plasmonic Metastructures: Physiochemical Mechanisms, Biosensing, and Bioimaging Opportunities

Determining the structural chirality of biomolecules is of vital importance in bioscience and biomedicine. Conventional methods for characterizing molecular chirality, e.g., circular dichroism (CD) spectroscopy, require high-concentration specimens due to the weak electronic CD signals of biomolecules such as amino acids. Artificially designed chiral plasmonic metastructures exhibit strong intrinsic chirality. However, the significant size mismatch between metastructures and biomolecules makes the former unsuitable for chirality-recognition-based molecular discrimination. Fortunately, constructing metallic architectures through molecular self-assembly allows chirality transfer from sub-nanometer biomolecules to sub-micrometer, intrinsically achiral plasmonic metastructures by means of either near-field interaction or chirality inheritance, resulting in hybrid systems with CD signals orders of magnitude larger than that of pristine biomolecules. This exotic property provides a new means to determine molecular chirality at extremely low concentrations (ideally at the single-molecule level). Herein, three strategies of chirality transfer from sub-nanometer biomolecules to sub-micrometer metallic metastructures are analyzed. The physiochemical mechanisms responsible for chirality transfer are elaborated and new fascinating opportunities for employing plasmonic metastructures in chirality-based biosensing and bioimaging are outlined.

Spin-Selective Full-Dimensional Manipulation of Optical Waves with Chiral Mirror

Realizing arbitrary manipulation of optical waves, which still remains a challenge, plays a key role in the implementation of optical devices with on-demand functionalities. However, it is hard to independently manipulate multiple dimensions of optical waves because the optical dimensions are basically associated with each other when adjusting the optical response of the devices. Here, the concise design principle of a chiral mirror is utilized to realize the full-dimensional independent manipulation of circular-polarized waves. By simply changing three structural variables of the chiral mirror, the proposed design principle can arbitrarily and independently empower the spin-selective manipulation of amplitude, phase, and operation wavelength of circular-polarized waves with a large modulation depth. This approach provides a simple solution for the realization of spin-selective full-dimensional manipulation of optical waves and shows ample application possibilities in the areas of optical encryption, imaging, and detection.

Kirigami/origami: unfolding the new regime of advanced 3D microfabrication/nanofabrication with "folding"

Advanced kirigami/origami provides an automated technique for modulating the mechanical, electrical, magnetic and optical properties of existing materials, with remarkable flexibility, diversity, functionality, generality, and reconfigurability. In this paper, we review the latest progress in kirigami/origami on the microscale/nanoscale as a new platform for advanced 3D microfabrication/nanofabrication. Various stimuli of kirigami/origami, including capillary forces, residual stress, mechanical stress, responsive forces, and focussed-ion-beam irradiation-induced stress, are introduced in the microscale/nanoscale region. These stimuli enable direct 2D-to-3D transformations through folding, bending, and twisting of microstructures/nanostructures, with which the occupied spatial volume can vary by several orders of magnitude compared to the 2D precursors. As an instant and direct method, ion-beam irradiation-based tree-type and close-loop nano-kirigami is highlighted in particular. The progress in microscale/nanoscale kirigami/origami for reshaping the emerging 2D materials, as well as the potential for biological, optical and reconfigurable applications, is briefly discussed. With the unprecedented physical characteristics and applicable functionalities generated by kirigami/origami, a wide range of applications in the fields of optics, physics, biology, chemistry and engineering can be envisioned.

Spin-preserving chiral photonic crystal mirror

Chirality refers to a geometric phenomenon in which objects are not superimposable on their mirror image. Structures made of nanoscale chiral elements can exhibit chiroptical effects, such as dichroism for left- and right-handed circularly polarized light, which makes these structures highly suitable for applications ranging from quantum information processing and quantum optics to circular dichroism spectroscopy and molecular recognition. At the same time, strong chiroptical effects have been challenging to achieve even in synthetic optical media, and chiroptical effects for light with normal incidence have been speculated to be prohibited in thin, lossless quasi-two-dimensional structures. Here, we report an experimental realization of a giant chiroptical effect in a thin monolithic photonic crystal mirror. Unlike conventional mirrors, our mirror selectively reflects only one spin state of light while preserving its handedness, with a near-unity level of circular dichroism. The operational principle of the photonic crystal mirror relies on guided-mode resonance (GMR) with a simultaneous excitation of leaky transverse electric (TE-like) and transverse magnetic (TM-like) Bloch modes in the photonic crystal slab. Such modes are not reliant on the suppression of radiative losses through long-range destructive interference, and even small areas of the photonic crystal exhibit robust circular dichroism. Despite its simplicity, the mirror strongly outperforms earlier reported structures and, contrary to a prevailing notion, demonstrates that near-unity reflectivity contrast for opposite helicities is achievable in a quasi-two-dimensional structure.

Fano-like chiroptical response in plasmonic heterodimer nanostructures

Plasmonic chirality has attracted more and more attention recently due to the enhanced chiroptical response and its potential applications in biosensing. Plasmonic Fano resonance arises from the interference between a dark narrow resonance and a bright broad resonance, and it provides a new paradigm to control the plasmon mode interactions. Even though a strong circular dichroism (CD) effect has been predicted in chiral nanostructures with a Fano resonance, there are few experimental studies, and the correlation between the two effects is unclear. In this research, we investigate these two effects in plasmonic heterodimer nanorods in the same spectral range. We find that the heterodimer nanostructure exhibits a Fano-like resonance and Fano-like chiroptical response, both of which are correlated with the coupling between a super-radiant electric dipole and a sub-radiant magnetic dipole mode. Due to the interference nature of the Fano resonance, the Fano-like chiroptical response exhibits distinctively sharp features in a narrow spectral range. This Fano-like chiroptical response can be explained by a modified chiral molecule theory and a simplified coupled electric-magnetic dipole model. This research may provide new insight into the physics picture of plasmonic chirality and paves the way for the development of sensitive plasmonic sensors.

A chiral switchable photovoltaic ferroelectric 1D perovskite

Spin and valley degrees of freedom in materials without inversion symmetry promise previously unknown device functionalities, such as spin-valleytronics. Control of material symmetry with electric fields (ferroelectricity), while breaking additional symmetries, including mirror symmetry, could yield phenomena where chirality, spin, valley, and crystal potential are strongly coupled. Here we report the synthesis of a halide perovskite semiconductor that is simultaneously photoferroelectricity switchable and chiral. Spectroscopic and structural analysis, and first-principles calculations, determine the material to be a previously unknown low-dimensional hybrid perovskite (R)-(-)-1-cyclohexylethylammonium/(S)-(+)-1 cyclohexylethylammonium) PbI₃. Optical and electrical measurements characterize its semiconducting, ferroelectric, switchable pyroelectricity and switchable photoferroelectric properties. Temperature dependent structural, dielectric and transport measurements reveal a ferroelectric-paraelectric phase transition. Circular dichroism spectroscopy confirms its chirality. The development of a material with such a combination of these properties will facilitate the exploration of phenomena such as electric field and chiral enantiomer-dependent Rashba-Dresselhaus splitting and circular photogalvanic effects.

Controlling the spin-selective absorption with two-dimensional chiral plasmonic gratings

Spin-selective absorption in a two-dimensional (2D) chiral plasmonic grating is observed by excitation of chiral-dependent plasmonic cavity resonance. For the proposed structures, the incident right-handed circularly polarized light is absorbed with nearly 100% efficiency, whereas the incident left-handed circularly polarized light is reflected with same handedness. Moreover, we show that the location of spin-selective absorption can be controlled flexibly by tuning the plasmonic cavity dimension. The intensity of spin-selective absorption can be enhanced as well as suppressed based on Fabry-Perot interference phase relation. Such 2D chiral plasmonic gratings could find many potential applications in novel photon-spin selective devices, such as circularly polarized light detectors/emitters, chiral sensors, chiral cavities, and spin lasers.

Dual-band asymmetric optical transmission of both linearly and circularly polarized waves using bilayer coupled complementary chiral metasurface

It is highly desirable to develop asymmetric transmission (AT) devices for both linearly and circularly polarized light. However, currently existing metamaterial-based AT devices require multi-step micro-nano fabrication processes and usually realize AT responses only for linearly or circularly polarized waves, not simultaneously for both. We here propose a dual-band AT device for both linearly and circularly polarized waves in the near-infrared region by using a bilayer coupled complementary chiral metasurface, which includes a half-gammadion-shape gold (Au) structural layer and its Babinet's complimentary copy. Unlike other multilayer AT devices working at optical frequencies, it takes less micro-nano fabrication steps. Besides, with the help of chirality and the inherent near-field coupling effect between the two complementary Au layers, the maximal AT parameters for linearly and circularly polarized waves can reach up to 0.45 and 0.56, respectively. The underlying mechanisms of dual-band AT responses are also investigated in depth from the perspectives of chirality and coupling effect. Our work offers a new and simple approach to high-performance AT devices, helps to better understand near-filed coupling effect in coupled complementary metasurfaces, and also expands their application fields.

3D Janus plasmonic helical nanoapertures for polarization-encrypted data storage

Helical structures have attracted considerable attention due to their inherent optical chirality. Here, we report a unique type of 3D Janus plasmonic helical nanoaperture with direction-controlled polarization sensitivity, which is simply fabricated via the one-step grayscale focused ion beam milling method. Circular dichroism in transmission of as large as 0.72 is experimentally realized in the forward direction due to the spin-dependent mode coupling process inside the helical nanoaperture. However, in the backward direction, the nanoaperture acquires giant linear dichroism in transmission of up to 0.87. By encoding the Janus metasurface with the two nanoaperture enantiomers having specified rotation angles, direction-controlled polarization-encrypted data storage is demonstrated for the first time, where a binary quick-response code image is displayed in the forward direction under the circularly polarized incidence of a specified handedness, while a distinct grayscale image is revealed in the backward direction under linearly polarized illumination with a specified azimuthal angle. We envision that the proposed Janus helical nanoapertures will provide an appealing platform for a variety of applications, which will range from multifunctional polarization control, enantiomer sensing, data encryption and decryption to optical information processing.