Directional Ostwald Ripening for Producing Aligned Arrays of Nanowires

Self-Competitive Growth of CsPbBr3 Planar Nanowire Array

Semiconductor planar nanowire arrays (PNAs) are essential for achieving large-scale device integration. Direct heteroepitaxy of PNAs on a flat substrate is constrained by the mismatch in crystalline symmetry and lattice parameters between the substrate and epitaxial nanowires. This study presents a novel approach termed "self-competitive growth" for heteroepitaxy of CsPbBr3 PNAs on mica. The key to inducing the self-competitive growth of CsPbBr3 PNAs on mica involves restricting the nucleation of CsPbBr3 nanowires in a high-adsorption region, which is accomplished by overlaying graphite sheets on the mica surface. Theoretical calculations and experimental results demonstrate that CsPbBr3 nanowires oriented perpendicular to the boundary of the high-adsorption area exhibit greater competitiveness in intercepting the growth of nanowires in the other two directions, resulting in PNAs with a consistent orientation. Moreover, these PNAs exhibit low-threshold and stable amplified spontaneous emission under one-, two-, and three-photon excitation, indicating their potential for an integrated laser array.

Facile one-pot synthesis of polyethyleneimine functionalized α-FeOOH nanoraft consisted of single-layer parallel-aligned ultrathin nanowires for efficient removal of Cr (VI): Synergy of reduction and adsorption

Two-dimensional (2D) iron oxide-hydroxide (FeOOH) nanomaterials as low-cost and environmental-friendly composites are promising materials for application in heavy metal elimination. However, developing 2D FeOOH adsorbents with high adsorption capacity and excellent durability toward Cr (VI) removal is still a challenge due to the intrinsically non-layered structure. Here, a novel polyethyleneimine (PEI) functionalized 2D single-layer nano-raft-like α-FeOOH (α-FeOOH NF) consisted of parallel-aligned ultrathin nanowires was obtained via a facile one-pot hydrothermal approach. It was found that the 2D α-FeOOH NF nanostructure was formed by an in-plane iterative self-assembly mechanism, where α-FeOOH nanoparticles acted as intermediates and iterative seeds with anisotropic growth. The as-prepared 2D α-FeOOH NF possessed porous structure and high surface area, which provided a strong ability to capture the Cr (VI) ions in water. Benefiting from the unique structure and PEI modification, it exhibited fast adsorption kinetic rate, high reusability, and high adsorption capacity toward Cr(VI) removal. The removal mechanism involved adsorption and reduction process. Besides, the molecular dynamic simulations disclosed a facet-dependent Cr(VI) adsorption behavior of α-FeOOH. The maximum adsorption capacity was 67.1 mg/g and the removal efficiency still maintained 83.9 % in the fifth cycle. This work demonstrated that 2D α-FeOOH NF could be a promising adsorbent for Cr(VI) removal.

Tailored Uniaxial Alignment of Nanowires Based on Off-Center Spin-Coating for Flexible and Transparent Field-Effect Transistors

The alignment of nanowires (NWs) has been actively pursued for the production of electrical devices with high-operating performances. Among the generally available alignment processes, spin-coating is the simplest and fastest method for uniformly patterning the NWs. During spinning, the morphology of the aligned NWs is sensitively influenced by the resultant external drag and inertial forces. Herein, the assembly of highly and uniaxially aligned silicon nanowires (Si NWs) is achieved by introducing an off-center spin-coating method in which the applied external forces are modulated by positioning the target substrate away from the center of rotation. In addition, various influencing factors, such as the type of solvent, the spin acceleration time, the distance between the substrate and the center of rotation, and the surface energy of the substrate, are adjusted in order to optimize the alignment of the NWs. Next, a field-effect transistor (FET) incorporating the highly aligned Si NWs exhibits a high effective mobility of up to 85.7 cm² V⁻¹ s⁻¹, and an on-current of 0.58 µA. Finally, the single device is enlarged and developed in order to obtain an ultrathin and flexible Si NW FET array. The resulting device has the potential to be widely expanded into applications such as wearable electronics and robotic systems.

General metal-organic framework-derived strategy to synthesize yolk-shell carbon-encapsulated nickelic spheres for sodium-ion batteries

Transition-metal compounds have attracted enormous attention as potential energy storage materials for their high theoretical capacity and energy density. However, the most present transition-metal compounds still suffer from severe capacity decay and limited rate capability due to the lack of robust architectures. Herein, a general metal-organic framework-derived route is reported to fabricate hierarchical carbon-encapsulated yolk-shell nickelic spheres as anode materials for sodium-ion batteries. The nickelic metal-organic framework (Ni-MOF) precursors can be in situ converted into hierarchical carbon-encapsulated Ni₂P (Ni₂P/C), NiS₂ (NiS₂/C) and NiSe₂ (NiSe₂/C) by phosphorization, sulfuration, and selenation reaction, respectively, and maintain their yolk-shell sphere-like morphology. The as-synthesized Ni₂P/C sample can deliver much lower polarization and discharge platform, smaller voltage gap, and faster kinetics in comparison with that of the other two counterparts, and thus achieve higher initial specific capacity (3222.1/1979.3 mAh g^-1) and reversible capacity of 765.4 mAh g^-1 after 110 cycles. This work should provide new insights into the phase and structure engineering of carbon-encapsulated transition-metal compound electrodes via MOFs template for advanced battery systems.

Electrically Transduced Gas Sensors Based on Semiconducting Metal Oxide Nanowires

Semiconducting metal oxide-based nanowires (SMO-NWs) for gas sensors have been extensively studied for their extraordinary surface-to-volume ratio, high chemical and thermal stabilities, high sensitivity, and unique electronic, photonic and mechanical properties. In addition to improving the sensor response, vast developments have recently focused on the fundamental sensing mechanism, low power consumption, as well as novel applications. Herein, this review provides a state-of-art overview of electrically transduced gas sensors based on SMO-NWs. We first discuss the advanced synthesis and assembly techniques for high-quality SMO-NWs, the detailed sensor architectures, as well as the important gas-sensing performance. Relationships between the NWs structure and gas sensing performance are established by understanding general sensitization models related to size and shape, crystal defect, doped and loaded additive, and contact parameters. Moreover, major strategies for low-power gas sensors are proposed, including integrating NWs into microhotplates, self-heating operation, and designing room-temperature gas sensors. Emerging application areas of SMO-NWs-based gas sensors in disease diagnosis, environmental engineering, safety and security, flexible and wearable technology have also been studied. In the end, some insights into new challenges and future prospects for commercialization are highlighted.

Post-synthetic oriented attachment of CsPbBr3 perovskite nanocrystal building blocks: from first principle calculation to experimental demonstration of size and dimensionality (0D/1D/2D)

Post-synthesis engineering methods that employ oriented attachment to precisely control the size and dimensionality (0D/1D/2D) of as-synthesized CsPbBr₃ nanocrystals (NCs) are demonstrated. We investigated the chemical effects of the properties of polar solvents, including their immiscibility, polarity, and boiling point, on the surfaces of NCs, as well as their effect on the structural and optical properties of NCs. Appropriate exploitation of the solvent properties made it possible to use a polar solvent to mildly affect the NCs indirectly such that they discarded their ligands and became attached to proximal NCs without being destroyed. Based on our observations, we developed a method whereby a solution of the NCs in a non-polar solvent is mixed with a polar solvent to form an immiscible phase to induce epitaxial growth of CsPbBr₃ NCs. The method enables the size of NCs to be easily regulated from 5 to 50 nm by controlling the engineering time. Taking advantage of the minimal effect of a mild solvent, we also developed a self-assembly method that operates at the liquid-air interface to systematically control the dimensionality. At this interface, the NCs self-assemble in the horizontal direction and grow into micron-sized, single-crystalline, defect-free nanowires (1D) and nanoplates (2D) via oriented attachment. Finally, we discuss the origin of the non-destructive oriented attachment phenomenon and the surface chemistry of a perovskite NC using density functional theory (DFT) simulations and a proposed model system.