Zirconium vs Aluminum Salalen Initiators for the Production of Biopolymers

Aluminium complexes of phenoxy-azo ligands in the catalysis of rac-lactide polymerisation

Fourteen new phenoxy-azo aluminium complexes comprising two series, namely, dimethyl{phenoxy-azo}aluminium complexes 1a-7a and monomethyl{phenoxy-azo}aluminium complexes 1b-7b, were successfully synthesised and characterised. The molecular structure of complex 4a, determined using X-ray diffraction analysis, displayed a distorted tetrahedral geometry. The 1H NMR spectrum of complex 5b revealed fluxional behaviour caused by isomeric transformation that occurs in the solution at room temperature. The activation parameters determined by lineshape analysis of variable-temperature 1H NMR spectra in toluene-d8 are as follows: ΔH‡ = 70.05 ± 1.19 kJ mol-1, ΔS‡ = 21.78 ± 3.58 J mol-1 K-1 and ΔG‡ (298 K) = 63.56 ± 0.11 kJ mol-1. All aluminium complexes are active initiators for the ring-opening polymerisation of rac-lactide, and the polymerisations proceeded in a controlled manner and were living. In comparison, the catalytic activity of the dimethyl{phenoxy-azo}aluminium complexes was insignificantly different from that of the corresponding monomethyl{phenoxy-azo}aluminium complexes. The steric factor of the ortho-phenoxy substituent was observed to exert a decelerating effect on the catalytic rate. Kinetic investigations revealed first-order dependency on both monomer and initiator concentrations. Comparative catalytic investigations conducted on phenoxy-azo aluminium and phenoxy-imine aluminium complexes revealed that the former complexes exhibited lower catalytic activity.

Simple Zn(ii) complexes for the production and degradation of polyesters

Nine new complexes based on thioether appended iminophenolate (ONS) ligands have been prepared and fully characterized in solution by NMR spectroscopy. Solid-state structures were also obtained for seven complexes. In solution, all complexes were monomeric. The complexes were highly active for the polymerization of purified rac-lactide ([M] : [Zn] : [BnOH] = 10 000 : 1 : 30 at 180 °C) reaching TOF values up to 250 000 h-1. The kinetics of the polymerization have been probed by in situ Raman spectroscopy. The rate of reaction was dramatically reduced using technical grade rac-lactide with increased initiator loading. To move towards a circular economy, it is vital that catalysts are developed to facilitate chemical recycling of commodity and emerging polymeric materials. In this vein, the complexes have been assessed for their ability to break down poly(lactic acid) and poly(ethylene terephthalate). The results from both the polymerization and degradation reactions are discussed in terms of ligand functionality.

Recent advances in externally controlled ring-opening polymerisations

Switchable catalysis is a powerful tool in the polymer chemist's toolbox as it allows on demand access to a variety of polymer architectures. Switchable catalysts operate by the generation of a species which is chemically distinct in behaviour and structure to the precursor. This difference in catalytic activity has been exploited to allow spatiotemporal control over polymerisations in the synthesis of (co)polymers. Although switchable methodologies have been applied to other polymerisation mechanisms for quite some time, for ring opening polymerisation (ROP) reactions it is a relatively young area of research. Despite its infancy, the field is accelerating rapidly. Here, we review recent developments for selected external stimuli for ROP, including redox chemistry, light, allosteric and mechanical control. Furthermore, a brief review on switch catalysis involving exogeneous gases will also be provided, although this area differs from traditional switchable catalysis techniques. An outlook on the future of switchable catalysis is also provided.

Polymetallic Group 4 Complexes: Catalysts for the Ring Opening Polymerisation of rac-Lactide

Five novel air- and moisture-stable polymetallic Ti and Zr amino acid-derived amine bis(phenolate) (ABP) complexes were synthesised and fully characterised, including X-ray crystallographic studies. The reaction of the ABP proligands with Ti or Zr alkoxides has resulted in the formation of polymetallic aggregates of different nuclearity. The steric bulk on the pendant arm of the ligand was found to play a critical role in establishing the nuclearity of the aggregated complex. Sterically, less-demanding groups, such as H or Me, facilitated the formation of tetrametallic Ti clusters, bridged by carboxylate groups, while increased steric bulk (tBu) led to the formation of binuclear μ-oxo-bridged species. The isolated complexes were employed as catalysts for the ring opening polymerisation (ROP) of rac-lactide. Overall, the Ti catalysts were all active with the smaller, bimetallic Ti aggregates exhibiting relatively faster rates. A monometallic, bis(ABP) Zr complex was found to exert remarkable ROP activity, albeit with limited control over the tacticity and molecular weight distribution of the polymer. A further oxo-bridged Zr cluster was shown to display a previously unprecedented trimetallic structure and achieved a moderate rate in the ROP of rac-lactide.

Alkaline Earth Metal-Mediated Highly Iso-selective Ring-Opening Polymerization of rac-Lactide

Alkaline earth (Ae) metal complexes of the aminophosphine borane ligand are highly active and iso-selective catalysts for the ring-opening polymerization (ROP) of rac-lactide (LA). The polymerization reactions are well controlled and produce polylactides with molecular weights that are precise and narrowly distributed. Kinetic studies reveal that the ROP of rac-LA catalyzed by all Ae metal complexes had a first-order dependency on LA concentration as well as catalyst concentration. A plausible reaction mechanism for Ae metal complex-mediated ROP of rac-LA is discussed, based on controlled kinetic experiments and molecular chain mobility.

Salalen vs. thiolen: in the ring(-opening of epoxide and cyclic carbonate formation)

A range of Fe(iii)-salalen and -thiolen–chloride complexes have been prepared and are shown to be active catalysts for the selective coupling of CO₂ and cyclohexene oxide (CHO).

Phosphasalen group IV metal complexes: synthesis, characterization and ring opening polymerization of lactide

A series of discrete mononuclear neutral and cationic phosphasalen Ti and Zr complexes has been isolated and characterized. For the first time, a cationic group IV metal complex was found active in the ROP of LA.

Enhanced Reactivity of Aluminum Complexes Containing P-Bridged Biphenolate Ligands in Ring-Opening Polymerization Catalysis

Aluminum complexes containing [RP(O)(2-O-3,5-tBu₂C₆H₂)₂]²⁻ [R = tBu (3a), Ph (3b)] have been synthesized, structurally characterized, and their reactivity studied in comparison with those of their [RP(2-O-3,5-tBu₂C₆H₂)₂]²⁻ [R = tBu (2a), Ph (2b)] analogs. Treating AlMe₃ with one equiv of H₂[3a-b] in THF at 0°C affords quantitatively [3a-b]AlMe, subsequent reactions of which with benzyl alcohol in THF at 25°C generate {[3a-b]Al(μ₂-OCH₂Ph)}₂. The methyl [3a-b]AlMe and the benzyloxide {[3a-b]Al(μ₂-OCH₂Ph)}₂ are all active for catalytic ring-opening polymerization (ROP) of ε-caprolactone and rac-lactide (rac-LA). Controlled experiments reveal that {[3a]Al(μ₂-OCH₂Ph)}₂ is competent in living polymerization. Kinetic studies indicate that [3a]AlMe, in the presence of benzyl alcohol, catalyzes ROP of rac-LA at a rate faster than [3b]AlMe and [2a]AlMe(THF) by a factor of 1.8 and 23.6, respectively, highlighting the profound reactivity enhancement in ROP catalysis by varying the P-substituents of these biphenolate complexes of aluminum.

The synthesis, characterisation and application of iron(iii)–acetate complexes for cyclic carbonate formation and the polymerisation of lactide

Cracking the whip: Simple iron(iii) acetate complexes have been applied to the catalytic cyclic carbonate formation and lactide ROP.

Highly active rare-earth metal catalysts for heteroselective ring-opening polymerization of racemic lactide

Rare-earth metal complexes usually exhibit high activities in the ring-opening polymerization (ROP) of lactide, yet only a few scandium complexes have shown satisfactory activity. Herein, we report the synthesis of a series of chiral anilido-oxazoline-supported scandium and yttrium complexes that exhibit high activity in the ROP of racemic lactide (rac-LA). Complexes La-f-Ln(CH2SiMe3)2THF (La-f = 2-(2,6-R2PhN)-phenyl-4-(S)-R'-oxazoline; for 1a-f: L = La-f, Ln = Sc; for 2a-d: L = La-d, Ln = Y) were synthesized via the convenient one-pot reaction of Ln(CH2SiMe3)3(THF)2 (Ln = Sc, Y) with the corresponding proligands. The crystal structures of 1a, 1d, 1e, and 1f were isostructural, adopting a distorted trigonal bipyramidal configuration. Sc complexes 1 showed outstanding activity in the ROP of rac-LA with heteroselectivity. TOFs of up to 720 h-1 and 2910 h-1 were obtained in THF at room temperature and toluene at 60 °C, respectively. To our knowledge, these are the highest activities reported for Sc systems. Y complexes 2 showed higher activity and heteroselectivity than the Sc complexes, with TOFs of up to 1176 h-1 in THF at room temperature. Compared with the ortho-substituent on the anilido moiety, the bulky substituent at the chiral center of the oxazoline ring had a greater effect on controlling the heteroselectivity.

Highly active Mg(ii) and Zn(ii) complexes for the ring opening polymerisation of lactide

Simple, highly active, Zn(ii) and Mg(ii) complexes for the industrial ring opening polymerisation (ROP) of lactide.

Zirconium and hafnium complexes bearing pyrrolidine derived salalen-type {ONNO} ligands and their application for ring-opening polymerization of lactides

The reactions of pyrrolidine derived salalen-type {ONNO} ligands (S)-L^1-3-H₂ with 1 equiv. M(OⁱPr)₄(HOⁱPr) (M = Zr or Hf) in diethyl ether yielded complexes [L^1-3M(OⁱPr)₂] (L = L¹, M = Zr (1); L = L², M = Zr (2), Hf (3); L = L³, M = Zr (4), Hf (5)). All of these complexes were well characterized by NMR spectroscopy, elemental analyses and single-crystal X-ray analysis in the case of complexes 1 and 3-5. X-ray structural determination revealed that these complexes were analogous mononuclear species and had a similar structure in which the metal centers were six-coordinated to two oxygen atoms and two nitrogen atoms of one ligand and two oxygen atoms of two isopropoxy groups. All of these complexes efficiently initialized the ring-opening polymerization of lactides to afford polymers with controlled molecular weight and narrow polydispersity. Furthermore, the ring-opening polymerization of rac-lactide catalyzed by complexes 1-5 afforded isotactic-enriched polymers in solution (P_m = 0.74-0.80) and under melt conditions (P_m = 0.63-0.72).

Aluminium complexes containing salicylbenzothiazole ligands and their application in the ring-opening polymerisation of rac-lactide and ε-caprolactone

This paper is the first report on the use of aluminium salicylbenzothiazole complexes for the ROP of rac-LA and ε-CL.

Aluminum complexes derived from a hexadentate salen-type Schiff base: synthesis, structure, and catalysis for cyclic carbonate synthesis

The unexpected aluminum complex was synthesized and found to be active in the cycloaddition reaction of terminal epoxides and CO₂ at atmospheric pressure.

Highly thermally stable and robust enantiopure zirconium NNN-scorpionates for the controlled ring-opening polymerization of rac-lactide

An enantiopure NNN-scorpionate zirconium alkoxide as the highest active group 4-based initiator in ROP of unpurified rac-LA under industrially preferred conditions.