Phosphino-Triazole Ligands for Palladium-Catalyzed Cross-Coupling

Diphosphine Bioconjugates via Pt(0)-Catalyzed Hydrophosphination. A Versatile Chelator Platform for Technetium-99m and Rhenium-188 Radiolabeling of Biomolecules

The ability to append targeting biomolecules to chelators that efficiently coordinate to the diagnostic imaging radionuclide, 99mTc, and the therapeutic radionuclide, 188Re, can potentially enable receptor-targeted "theranostic" treatment of disease. Here we show that Pt(0)-catalyzed hydrophosphination reactions are well-suited to the derivatization of diphosphines with biomolecular moieties enabling the efficient synthesis of ligands of the type Ph2PCH2CH2P(CH2CH2-Glc)2 (L, where Glc = a glucose moiety) using the readily accessible Ph2PCH2CH2PH2 and acryl derivatives. It is shown that hydrophosphination of an acrylate derivative of a deprotected glucose can be carried out in aqueous media. Furthermore, the resulting glucose-chelator conjugates can be radiolabeled with either 99mTc(V) or 188Re(V) in high radiochemical yields (>95%), to furnish separable mixtures of cis- and trans-[M(O)2L2]+ (M = Tc, Re). Single photon emission computed tomography (SPECT) imaging and ex vivo biodistribution in healthy mice show that each isomer possesses favorable pharmacokinetic properties, with rapid clearance from blood circulation via a renal pathway. Both cis-[99mTc(O)2L2]+ and trans-[99mTc(O)2L2]+ exhibit high stability in serum. This new class of functionalized diphosphine chelators has the potential to provide access to receptor-targeted dual diagnostic/therapeutic pairs of radiopharmaceutical agents, for molecular 99mTc SPECT imaging and 188Re systemic radiotherapy.

Challenging cross couplings, in water, aided by in situ iodination of (hetero)aromatic bromides

Palladium-catalyzed reactions that involve functionalized substrates are oftentimes problematic. Those involving aryl or heteroaryl bromides that are either resistant to, or inefficient in such couplings present challenges that are difficult to overcome and may require development of an entirely new route, or worse, no opportunity to install the desired group using a standard coupling strategy. In this report, we describe a solution that allows for the in situ conversion of such bromo educts to transient iodide derivatives that can be made and used under environmentally responsible conditions, for subsequent reactions to highly functionalized, complex targets.

Process-Divergent Syntheses of 4- and 5-Sulfur-Functionalized 1,2,3-Triazoles via Copper-Catalyzed Azide-Alkyne Cycloadditions of 1-Phosphinyl-2-sulfanylethynes

4-Sulfanyl-substituted 1,2,3-triazoles were provided regioselectively with good yields and broad scope via consecutive t-BuOK-promoted dephosphinylation of 1-phosphinyl-2-sulfanylethynes and copper-catalyzed azide-alkyne cycloadditions (CuAAC) with alkyl azides. Unsymmetrically substituted ditriazoles were successfully obtained using a tandem dephosphinylative CuAAC protocol with diazides. Direct CuAAC of the 1-phosphinyl-2-sulfanylethynes with azides afforded regioisomeric mixtures of 4-phosphinyl-5-sulfanyl- and 5-phosphinyl-4-sulfanyl-1,2,3-triazoles that were easily separable from one another. When the phosphinyl- and sulfanyl-substituted triazoles were treated with t-BuOK, the dephosphination proceeded smoothly, yielding the corresponding 5- and 4-sulfanyltriazoles, respectively. 5-(1-Aryl-1-hydroxymethyl)-4-sulfanyltriazoles were synthesized by stepwise treatment of 5-phosphinyl-4-sulfanyltriazole with MeMgBr and arylaldehydes. Additionally, Ph₂P(O) and RS groups in the triazoles were easily converted to Ph₂P and RSO₂ by PhSiH₃-reduction and m-CPBA-oxidation, respectively. Following the dephosphinylative CuAAC of 1-phosphinyl-2-(4-t-butylphenylsulfanyl)ethyne with aryl azides and m-CPBA-oxidation, potent antagonists of pregnane X receptor LC-58 and LC-59 were successfully produced.

The crystal structure of 1-(2-iodophenyl)-4-phenyl-1H-1,2,3-triazole, C14H10IN3

C14H10IN3, orthorhombic, P212121 (no. 19), a = 8.0778(6) Å, b = 11.1909(10) Å, c = 14.3114(12) Å, V = 1293.72(19) Å3, Z = 4, R gt (F) = 0.0312, wR ref (F 2) = 0.0790, T = 290 K.

RuII complexes of 1,2,3-triazole appended tertiary phosphines, [P(Ph){(o-C6H4)(1,2,3-N3C(Ph)CH}2] and [P(Ph){o-C6H4(CCH)-(1,2,3-N3-Ph)}2]: highly active catalysts for transfer hydrogenation of carbonyl/nitro compounds and for α-alkylation of ketones

The synthesis of two new 1,2,3-triazole appended monophosphines [P(Ph){(o-C₆H₄)(1,2,3-N₃C(Ph)CH}₂] (1) and [P(Ph){o-C₆H₄(CCH)(1,2,3-N₃-Ph)}₂] (2) and their Ru^II complexes is described. The reactions of 1 and 2 with [Ru(PPh₃)₃Cl₂] in a 1 : 1 molar ratio produced cationic complexes 3 and 4, respectively. Both the complexes showed very high catalytic activity towards transfer hydrogenation, nitro reduction, and α-alkylation reactions and afforded the corresponding products in good to excellent yields. The free energy of β-hydride elimination from the respective Ru-alkoxide intermediates, a key mechanistic step common to all the three catalytic pathways, was calculated to be close to ergoneutral by density functional theory-based calculations, which is posited to rationalize the catalytic activity of 3. The reduction of aromatic nitro compounds was found to be highly chemoselective and produced the corresponding amines as major products even in the presence of a carbonyl group. The triazolyl-N2 coordinated Ru^II-NPN complex 3 showed better catalytic activity compared to the triazolyl-N3 coordinated complex 4.

1,2,3-Triazole based ligands with phosphine and pyridine functionalities: synthesis, PdII and PtII chemistry and catalytic studies

This manuscript describes the syntheses of pyridine appended triazole-based mono- and bisphosphines, [o-Ph₂P(C₆H₄){1,2,3-N₃C(Py)C(H)}] (2), [o-Br(C₆H₄){1,2,3-N₃C(Py)C(PPh₂)}] (3), [C₆H₅{1,2,3-N₃C(Py)C(PPh₂)}] (4), [Ph₂P(C₆H₄){1,2,3-N₃C(Py)C(PPh₂)}] (5) and [3-Ph₂P-2-{1,2,3-N₃C(Ph)C(PPh₂)}C₅H₃N] (6), their palladium and platinum chemistry and catalytic applications. These ligands upon treatment with [M(COD)Cl₂] (M = Pd or Pt) yielded complexes with different coordination modes, depending on the reaction conditions. Both κ²-P,N and κ²-P,P coordination modes were observed in many of the complexes indicating the ambidentate nature of these ligands. Monophosphine 2 in the presence of a base afforded rare fused-5,6-membered PCN pincer complexes [MCl{o-Ph₂P(C₆H₄){1,2,3-N₃C(Py)C(H)}}-κ³-P,C,N] (7, M = Pd; 8, M = Pt), whereas the reactions of 4 with [M(COD)Cl₂] (M = Pd, Pt) produced κ²-P,N chelate complexes [MCl₂{C₆H₅{1,2,3-N₃C(Py)C(PPh₂)}-κ²-P,N}] (9, M = Pd; 10, M = Pt). Similar reactions of 5 and 6 resulted in κ²-P,P chelate complexes [MCl₂{{3-Ph₂P-2-{1,2,3-N₃C(Ph)C(PPh₂)}C₅H₃N}-κ²-P,P}] (11, M = Pd; 12, M = Pt) and [MCl₂{3-Ph₂P-2-{1,2,3-N₃C(Ph)C(PPh₂)}C₅H₃N}-κ²-P,P}] (13, M = Pd; 14, M = Pt), respectively. The palladium(II) complexes have shown excellent catalytic activity in the α-alkylation reaction of acetophenone derivatives.

Click chemistry in the synthesis of catalytically relevant organoselenium compounds: development and applications of catalysts for organic synthesis

Use of click chemistry in synthesizing organoselenium compounds and the applications of metal complexes of such compounds as catalysts for various chemical transformations have been critically analyzed.

Exploring steric and electronic parameters of biaryl phosphacycles

Steric and electronic parameters of the newly developed biaryl phosphacycles derived from the phobane[3.3.1] (Phob) and phosphatrioxa-adamantane (Cg) moieties were quantified from various experimental and theoretical methods.

Group 11 metal complexes of the dinucleating triazole appended bisphosphine 1,4-bis(5-(diisopropylphosphaneyl)-1-phenyl-1H-1,2,3-triazol-4-yl)benzene

The synthesis of a triazole appended dinucleating bisphosphine 1,4-bis(5-(diisopropylphosphaneyl)-1-phenyl-1H-1,2,3-triazol-4-yl)benzene (2) and its coinage metal complexes are described. The dinucleating bisphosphine 2 was obtained by the temperature-controlled lithiation of 1,4-bis(1-phenyl-1H-1,2,3-triazol-4-yl)benzene (1a) and 1,4-bis(1-(2-bromophenyl)-1H-1,2,3-triazol-4-yl)benzene (1b) followed by the reaction with ⁱPr₂PCl. The reactions of 2 with copper(I) halides in 1 : 2 molar ratios yielded the [Cu(μ₂-X)]₂ dimeric complexes [{Cu(μ₂-X)}₂(PⁱPr₂N₃PhC₂)₂C₆H₄] (3, X = Cl; 4, X = Br; and 5, X = I), whereas the reaction of 2 with AgBr resulted in the formation of hetero-cubane complex [{Ag₄(μ₃-Br)₄}{(PⁱPr₂N₃PhC₂)₂C₆H₄}₂] (7). Similar reactions of 2 with AgX in 1 : 2 molar ratios yielded disilver complexes [{Ag(μ₂-X)}₂{(PⁱPr₂N₃PhC₂)₂C₆H₄}] (6, X = Cl and 8, X = I). Treatment of 2 with AgOAc in a 1 : 2 molar ratio afforded a dinuclear complex [Ag₂(μ₂-OAc)₂{(PⁱPr₂N₃PhC₂)₂(C₆H₄)}] (9) with one of the acetate ligands bridging the two metal centres in the side-on mode, whereas the other one adopting the end-on mode keeping the >CO group uncoordinated. The reaction of 2 with two equivalents of [AuCl(SMe₂)] afforded the digold complex [(AuClPⁱPr₂N₃PhC₂)₂C₆H₄] (10). The molecular structures of 2-5 and 7-10 were confirmed by single crystal X-ray analysis. Non-covalent interactions between Cu and C_arene were observed in the molecular structures of 3, 4 and 5. These weak interactions were also assessed by DFT calculations in terms of their non-covalent interaction plots (NCI) and QTAIM analyses.

Preparation of Acidic 5-Hydroxy-1,2,3-triazoles via the Cycloaddition of Aryl Azides with β-Ketoesters

Herein, a high-yielding cycloaddition reaction of β-ketoesters and azides to provide 1,2,3-triazoles is described. The reactions employing 2-unsubstituted β-ketoesters were found to provide 5-methyl-1,2,3-triazoles, whereas 2-alkyl-substituted β-ketoesters provided 5-hydroxy-1,2,3-triazoles (shown to be relatively acidic) in high yields and as single regioisomers. Several novel compounds were reported and characterized including long-chain 5-hydroxy-1,2,3-triazoles potentially bioisosteric to hydroxamic acids.

Evaluation of P-bridged biaryl phosphine ligands in palladium-catalysed Suzuki-Miyaura cross-coupling reactions

A family of biaryl phosphacyclic ligands derived from phobane and phosphatrioxa-adamantane frameworks is described. The rigid biaryl phosphacycles are efficient for Suzuki-Miyaura cross-coupling of aryl bromides and chlorides. In particular, coupling reactions of the challenging sterically hindered and heterocyclic substrates were viable at room temperature.

New Members of the Cinchona Alkaloids Family: Assembly of the Triazole Heterocycle at the 6' Position

The substance class of the well-known Cinchona alkaloids is widened by 6′-Amino-cinchonine and 6′-Amino-cinchonidine, novel compounds which incorporate a primary amino function in the quinolinic ring system. These key intermediates open the field for a range of fruitful chemistry. Here is described a short and direct pathway for the synthesis of triazole containing derivatives of the above-mentioned substances using the [3 + 2] Huisgen cycloaddition. For this purpose, the amines were first converted into the corresponding azides. Based on this, non-substituted and silyl-protected triazoles were synthesized as examples. Furthermore, didehydrated derivatives of quincorine and quincoridine were used as addition partners, resulting in compounds that carry the quinuclidine ring of the cinchona alkaloids at both ends. Some of these compounds were examined radiographically to investigate the position of the quinuclidine ring to the triazole. The solid-state structures of compounds 10, 11 and 28 were determined by X-ray diffraction analyses.

Ligand Steric Effects of α-Diimine Nickel(II) and Palladium(II) Complexes in the Suzuki-Miyaura Cross-Coupling Reaction

Nickel catalysts represent a low cost and environmentally friendly alternative to palladium-based catalytic systems for Suzuki-Miyaura cross-coupling (SMC) reactions. However, nickel catalysts have suffered from poor air, moisture, and thermal stabilities, especially at high catalyst loading, requiring controlled reaction conditions. In this report, we examine a family of mono- and dinuclear Ni(II) and Pd(II) complexes with a diverse and versatile α-diimine ligand environment for SMC reactions. To evaluate the ligand steric effects, including the bite angle in the reaction outcomes, the structural variation of the complexes was achieved by incorporating iminopyridine- and acenaphthene-based ligands. Moreover, the impact of substrate bulkiness was investigated by reacting various aryl bromides with phenylboronic acid, 2-naphthylboronic acid, and 9-phenanthracenylboronic acid. Yields were the best with the dinuclear complex, being nearly quantitative (93-99%), followed by the mononuclear complexes, giving yields of 78-98%. Consequently, α-diimine-based ligands have the potential to deliver Ni-based systems as sustainable catalysts in SMC.

New 1,2,3-triazole based bis- and trisphosphine ligands: synthesis, transition metal chemistry and catalytic studies

This paper describes a novel synthetic methodology for the preparation of 1,2,3-triazole based phosphines and their transition metal chemistry and preliminary catalytic studies.

Balancing Bulkiness in Gold(I) Phosphino-triazole Catalysis

The syntheses of a series of 1-phenyl-5-phosphino 1,2,3-triazoles are disclosed, within which, the phosphorus atom (at the 5-position of a triazole) is appended by one, two or three triazole motifs, and the valency of the phosphorus(III) atom is completed by two, one or zero ancillary (phenyl or cyclohexyl) groups respectively. This series of phosphines was compared with tricyclohexylphosphine and triphenylphosphine to study the effect of increasing the number of triazoles appended to the central phosphorus atom from zero to three triazoles. Gold(I) chloride complexes of the synthesised ligands were prepared and analysed by techniques including single-crystal X-ray diffraction structure determination. Gold(I) complexes were also prepared from 1-(2,6-dimethoxy)-phenyl-5-dicyclohexyl-phosphino 1,2,3-triazole and 1-(2,6-dimethoxy)-phenyl-5-diphenyl-phosphino 1,2,3-triazole ligands. The crystal structures thus obtained were examined using the SambVca (2.0) web tool and percentage buried volumes determined. The effectiveness of these gold(I) chloride complexes to serve as precatalysts for alkyne hydration were assessed. Furthermore, the regioselectivity of hydration of but-1-yne-1,4-diyldibenzene was probed.

Derivatisation of parthenolide to address chemoresistant chronic lymphocytic leukaemia

Parthenolide is a natural product that exhibits anti-leukaemic activity, however, its clinical use is limited by its poor bioavailability. It may be extracted from feverfew and protocols for growing, extracting and derivatising it are reported. A novel parthenolide derivative with good bioavailability and pharmacological properties was identified through a screening cascade based on in vitro anti-leukaemic activity and calculated "drug-likeness" properties, in vitro and in vivo pharmacokinetics studies and hERG liability testing. In vitro studies showed the most promising derivative to have comparable anti-leukaemic activity to DMAPT, a previously described parthenolide derivative. The newly identified compound was shown to have pro-oxidant activity and in silico molecular docking studies indicate a prodrug mode of action. A synthesis scheme is presented for the production of amine 7 used in the generation of 5f.

Synthesis of the First Resorcin[4]arene-Functionalized Triazolium Salts and Their Use in Suzuki–Miyaura Cross-Coupling Reactions

Two bulky triazolium salts, namely 1-{4(24),6(10),12(16),18(22)-tetramethylenedioxy- 2,8,14,20-tetrapentylresorcin[4]arene-5-yl}-4-phenyl-3-methyl-1H-1,2,3-triazolium tetrafluoro borate (1) and 1,4-bis{4(24),6(10),12(16),18(22)-tetramethylenedioxy-2,8,14,20-tetrapentyl resorcin[4]arene-5-yl}-3-methyl-1H-1,2,3-triazolium iodide (2), have been synthesized and assessed in the palladium-catalyzed Suzuki–Miyaura cross-coupling of aryl chlorides, with aryl boronic acids. As a general trend, the reaction rates obtained with 1 were significantly higher (up to 5 times) than those observed for 2, this mainly reflected a sterically more accessible metal center in the catalytic intermediates formed with 1. The presence of flexible pentyl chains in these intermediates, which might sterically interact with the metal center, when the latter adopts an exo-orientation with respect to the cavity, were likely responsible for the observed good performance.

Phosphino-Triazole Ligands for Palladium-Catalyzed Cross-Coupling

Twelve 1,5-disubtituted and fourteen 5-substituted 1,2,3-triazole derivatives bearing diaryl or dialkyl phosphines at the 5-position were synthesized and used as ligands for palladium-catalyzed Suzuki-Miyaura cross-coupling reactions. Bulky substrates were tested, and lead-like product formation was demonstrated. The online tool SambVca2.0 was used to assess steric parameters of ligands and preliminary buried volume determination using XRD-obtained data in a small number of cases proved to be informative. Two modeling approaches were compared for the determination of the buried volume of ligands where XRD data was not available. An approach with imposed steric restrictions was found to be superior in leading to buried volume determinations that closely correlate with observed reaction conversions. The online tool LLAMA was used to determine lead-likeness of potential Suzuki-Miyaura cross-coupling products, from which 10 of the most lead-like were successfully synthesized. Thus, confirming these readily accessible triazole-containing phosphines as highly suitable ligands for reaction screening and optimization in drug discovery campaigns.