Methylene C(sp3)–H β,β′-Diarylation of Cyclohexanecarbaldehydes Promoted by a Transient Directing Group and Pyridone Ligand

Pd(0)-Catalyzed Intermolecular Methylene C(sp3)-H Silylation by Using N-Heterocyclic Carbene Ligands

The direct functionalization of methylene C(sp3)-H bonds is one of the greatest challenges in transition metal-catalyzed C-H activation. Although Pd(0)-catalyzed intramolecular cyclization reactions of methylene C(sp3)-H bonds have been reported, intermolecular functionalization remains to be discovered. Herein, we report the first example of a Pd(0)-catalyzed intermolecular methylene C(sp3)-H functionalization reaction. By use of a N-heterocyclic carbene ligand, the methylene C(sp3)-H bonds of 1-(benzyloxy)-2-iodobenzenes are activated and disilylated with hexamethyldisilane, affording disilylated products.

When is an Imine Directing Group a Transient Imine Directing Group in C-H Functionalization?

'Transient' C-H functionalization has emerged in recent years to describe the use of a dynamic linkage, often an imine, to direct cyclometallation and subsequent functionalization. As the field continues to grow in popularity, we consider the features that make an imine directing group transient. A transient imine should be i) formed dynamically in situ, ii) avoid discrete introduction or cleavage steps, and iii) offer the potential for catalysis in both the directing group and metal. This concept article contrasts transient imines with pioneering early studies of imines as directing groups for the formation of metallacycles and the use of preformed imines in C-H functionalization. Leading developments in the use of catalytic additives to form transient directing groups (as aldehyde or amine) are covered including selected highlights of the most recent examples of catalytic imine directed C-H functionalization with transition metals.

Palladium-Catalyzed β-C(sp3)-H Bond Arylation of Tertiary Aldehydes Facilitated by 2-Pyridone Ligands

2-Pyridone ligand-facilitated palladium-catalyzed direct C-H bond functionalization via the transient directing group strategy has become an attractive topic. Here, we report a Pd-catalyzed direct β-C(sp3)-H arylation reaction of tertiary aliphatic aldehydes by using an α-amino acid as a transient directing group in combination with a 2-pyridone ligand.

PdII-Catalyzed γ-C(sp3)-H (Hetero)Arylation of Ketones Enabled by Transient Directing Groups

Pd(II)-catalyzed γ-C(sp3)-H (hetero)arylation of aliphatic ketones is developed using α-amino acid as transient directing groups (TDG). A variety of aliphatic ketones were (hetero)arylated at the γ-position via a 5,6-membered fused cyclopalladation intermediate to afford the remotely arylated products in up to 88% yield. The crucial ligand effect of 2-pyridone is further enhanced by reducing the loading of acid additives. Consequentially, the improved reactivity of this catalytic system has also made possible the cyclic γ-methylene C(sp3)-H arylation of ketones. Mechanistic investigtigation and comparison to the γ-C-H arylation of aldehydes revealed a structural insight for designing site selective TDG.

HFIP in Organic Synthesis

1,1,1,3,3,3-Hexafluoroisopropanol (HFIP) is a polar, strongly hydrogen bond-donating solvent that has found numerous uses in organic synthesis due to its ability to stabilize ionic species, transfer protons, and engage in a range of other intermolecular interactions. The use of this solvent has exponentially increased in the past decade and has become a solvent of choice in some areas, such as C-H functionalization chemistry. In this review, following a brief history of HFIP in organic synthesis and an overview of its physical properties, literature examples of organic reactions using HFIP as a solvent or an additive are presented, emphasizing the effect of solvent of each reaction.

Interplay between the Directing Group and Multifunctional Acetate Ligand in Pd-Catalyzed anti-Acetoxylation of Unsymmetrical Dialkyl-Substituted Alkynes

The cooperative action of the acetate ligand, the 2-pyridyl sulfonyl (SO₂Py) directing group on the alkyne substrate, and the palladium catalyst has been shown to be crucial for controlling reactivity, regioselectivity, and stereoselectivity in the acetoxylation of unsymmetrical internal alkynes under mild reaction conditions. The corresponding alkenyl acetates were obtained in good yields with complete levels of β-regioselectivity and anti-acetoxypalladation stereocontrol. Experimental and computational analyses provide insight into the reasons behind this delicate interplay between the ligand, directing group, and the metal in the reaction mechanism. In fact, these studies unveil the multiple important roles of the acetate ligand in the coordination sphere at the Pd center: (i) it brings the acetic acid reagent into close proximity to the metal to allow the simultaneous activation of the alkyne and the acetic acid, (ii) it serves as an inner-sphere base while enhancing the nucleophilicity of the acid, and (iii) it acts as an intramolecular acid to facilitate protodemetalation and regeneration of the catalyst. Further insight into the origin of the observed regiocontrol is provided by the mapping of potential energy profiles and distortion–interaction analysis.

Ligand-promoted palladium-catalyzed β-methylene C-H arylation of primary aldehydes

The transient directing group (TDG) strategy allowed long awaited access to the direct β-C(sp³)-H functionalization of unmasked aliphatic aldehydes via palladium catalysis. However, the current techniques are restricted to terminal methyl functionalization, limiting their structural scopes and applicability. Herein, we report the development of a direct Pd-catalyzed methylene β-C-H arylation of linear unmasked aldehydes by using 3-amino-3-methylbutanoic acid as a TDG and 2-pyridone as an external ligand. Density functional theory calculations provided insights into the reaction mechanism and shed light on the roles of the external and transient directing ligands in the catalytic transformation.

PdII-Catalyzed Site-selective β- and γ-C(sp3)-H Arylation of Primary Aldehydes Controlled by Transient Directing Groups

Pd(II)-catalyzed site-selective β- and γ-C(sp³)-H arylation of primary aldehydes is developed by rational design of L,X-type transient directing groups (TDG). External 2-pyridone ligands are identified to be crucial for the observed reactivity. By minimizing the loading of acid additives, the ligand effect is enhanced to achieve high reactivities of the challenging primary aldehyde substrates. Site selectivity can be switched from the proximate to the relatively remote position by changing the bite angle of TDG to match the desired palladacycle size. Experimental and computational investigations support this rationale for designing TDG to potentially achieve remote site-selective C(sp³)-H functionalizations.

Pd(II)-Catalyzed Transient Directing Group-Assisted Regioselective Diverse C4-H Functionalizations of Indoles

The development of a rational strategy for achieving site-selective C4-H halogenation of indoles is an appealing yet challenging task. Herein, we disclose a Pd(II)-catalyzed transient directing group (TDG)-assisted methodology for realizing C4 chlorination/bromination of indoles employing glycine as the TDG and NFSI as a bystanding oxidant. The use of inexpensive and commercially available CuX₂ as the halide source is the key highlight of this protocol. Furthermore, the TDG methodology was also extended to accessing C4 acetoxylated indoles employing acetic acid as the acetate source and 1-fluoro-2,4,6-trimethylpyridinium triflate as the oxidant.

Diastereoselective palladium-catalyzed functionalization of prochiral C(sp3)-H bonds of aliphatic and alicyclic compounds

We highlight the reported developments of the palladium-catalyzed C-H activation and functionalization of the inactive/unreactive prochiral C(sp³)-H bonds of aliphatic and alicyclic compounds. There exist numerous classical methods for generating contiguous stereogenic centers in a compound with a high degree of stereocontrol. Along similar lines, the Pd(II)-catalyzed, directing group-aided functionalization of inactive prochiral/diastereotopic C(sp³)-H bonds have been exploited to accomplish the stereoselective construction of stereo-arrays in organic compounds. We present a concise discussion on how specific strategies consisting of Pd(II)-catalyzed, directing group-aided C(sp³)-H functionalization have been utilized to generate two or more stereogenic centers in aliphatic and alicyclic compounds.

Ligand Enabled Pd(II)-Catalyzed γ-C(sp3)-H Lactamization of Native Amides

γ-Lactams form important structural cores of a range of medicinally relevant natural products and clinical drugs, principal examples being the new generation of immunomodulatory imide drugs (IMiDs) and the brivaracetam family. Compared to conventional multistep synthesis, an intramolecular γ-C-H amination of aliphatic amides would allow for the direct construction of valuable γ-lactam motifs from abundant amino acid precursors. Herein we report a novel 2-pyridone ligand enabled Pd(II)-catalyzed γ-C(sp³)-H lactamization of amino acid derived native amides, providing the convenient synthesis of γ-lactams, isoindolinones, and 2-imidazolidinones. C6-Substitution of the 2-pyridone ligand is crucial for the lactam formation. This protocol features the use of N-acyl amino acids, which serve as both the directing group and cyclization partner, practical and environmentally benign tert-butyl hydrogen peroxide (TBHP) as the sole bystanding oxidant, and a broad substrate scope. The utility of this protocol was demonstrated through the two-step syntheses of a lenalidomide analog and brivaracetam from readily available carboxylic acids and amino acids.

Transition-Metal-Catalyzed, Coordination-Assisted Functionalization of Nonactivated C(sp3)-H Bonds

Transition-metal-catalyzed, coordination-assisted C(sp³)-H functionalization has revolutionized synthetic planning over the past few decades as the use of these directing groups has allowed for increased access to many strategic positions in organic molecules. Nonetheless, several challenges remain preeminent, such as the requirement for high temperatures, the difficulty in removing or converting directing groups, and, although many metals provide some reactivity, the difficulty in employing metals outside of palladium. This review aims to give a comprehensive overview of coordination-assisted, transition-metal-catalyzed, direct functionalization of nonactivated C(sp³)-H bonds by covering the literature since 2004 in order to demonstrate the current state-of-the-art methods as well as the current limitations. For clarity, this review has been divided into nine sections by the transition metal catalyst with subdivisions by the type of bond formation. Synthetic applications and reaction mechanism are discussed where appropriate.

1,2,4-Trifunctionalized Cyclohexane Synthesis via a Diastereoselective Reductive Cope Rearrangement and Functional Group Interconversion Strategy

Polyfunctionalized cyclohexanes are privileged scaffolds in drug discovery. Reported herein is a method for synthesizing 1,2,4-trifunctionalized cyclohexanes via diastereoselective reductive Cope rearrangement. The scaffolds obtained can be derivatized by orthogonal functional group interconversion to cyclohexanes bearing a 1-amide, 2-branched arylallyl, and variable 4-functional group.

Transient Directing Groups in Metal-Organic Cooperative Catalysis

The direct functionalization of C-H bonds is among the most fundamental chemical transformations in organic synthesis. However, when the innate reactivity of the substrate cannot be utilized for the functionalization of a given single C-H bond, this selective C-H bond functionalization mostly relies on the use of directing groups that allow bringing the catalyst in close proximity to the C-H bond to be activated and these directing groups need to be installed before and cleaved after the transformation, which involves two additional undesired synthetic operations. These additional steps dramatically reduce the overall impact and the attractiveness of C-H bond functionalization techniques since classical approaches based on substrate pre-functionalization are sometimes still more straightforward and appealing. During the past decade, a different approach involving both the in situ installation and removal of the directing group, which can then often be used in a catalytic manner, has emerged: the transient directing group strategy. In addition to its innovative character, this strategy has brought C-H bond functionalization to an unprecedented level of usefulness and has enabled the development of remarkably efficient processes for the direct and selective introduction of functional groups onto both aromatic and aliphatic substrates. The processes unlocked by the development of these transient directing groups will be comprehensively overviewed in this review article.

Pd-Catalyzed β-C-H Arylation of Aldehydes and Ketones Based on a Transient Directing Group

The direct Pd-catalyzed β-C-H arylation of aldehydes and ketones was developed by using 2-amino-N,N'-diisopropylsuccinamide as a novel transient directing group (TDG). The TDG showed good versatility in functionalizing unactivated β-C-H bonds of aldehydes and ketones. It was effective not only for aliphatic aldehydes and ketones but also for aromatic aldehydes and ketones. Besides, it was applicable to o-methylbenzaldehydes.

Transient directing ligands for selective metal-catalysed C–H activation

C-H activation is a 'simple-to-complex' transformation that nature has perfected over millions of years of evolution. Transition-metal-catalysed C-H activation has emerged as an expeditious means to expand the chemical space by introducing diverse functionalities. Notably, among the strategies to selectively cleave a particular C-H bond, the catalytic use of a small molecule as co-catalyst to generate a transient directing group, which provides a balance between step economy and chemical productivity, has gained immense attention in recent years. This allows one to convert a desired C-H bond irrespective of its geometrical or stereochemical configuration. This Review describes the various transient directing groups used in C-H activation and explains their mechanistic significance.

Harnessing the Efficacy of 2-Pyridone Ligands for Pd-Catalyzed (β/γ)-C(sp3)-H Activations

Mechanisms of palladium-aminooxyacetic acid and 2-pyridone-enabled cooperative catalysis for the β- and γ-C(sp³)-H functionalizations of ketones are investigated with density functional theory. 2-Pyridone-assisted dissociation of the trimeric palladium acetate [Pd₃(OAc)₆] is found to be crucial for these catalytic pathways. The evolution of the [6,6]-membered palladacycles (Int-4) are elucidated and are active complexes in Pd(II/IV) catalytic cycles. Nevertheless, 2-pyridone acts as an external ligand, which accelerates β-C(sp³)-H activation. Computational investigations suggest that the C(sp³)-H bond activation is the rate-limiting step for both the catalytic processes. To overcome the kinetic inertness, an unsubstituted aminooxyacetic acid auxiliary is used for the β-C(sp³)-H activation pathway to favor the formation of the [5,6]-membered palladacycle intermediate, Int-IV. Among the several modeled ligands, 3-nitro-5-((trifluoromethyl)sulfonyl)pyridine-2(1H)-one (L8) is found to be highly valuable for both the (β/γ)-C(sp³)-H functionalization catalytic cycles. A favorable free energy pathway of late-stage functionalization of (R)-muscone paves the path to design other bioactive molecules.

Pd-Catalyzed C(sp3)-H Biarylation via Transient Directing Group Strategy

Here, we describe a highly selective Pd-catalyzed C(sp³)-H biarylation of 2-methylbenzaldehydes using cyclic diaryliodonium salts as arylation reagents. The key strategy is the employment of tert-leucine as a bidentate transient directing group for the proximity-driven metalation to achieve reactivity and selectivity in C-H activation. Various functionalized biaryls bearing both aldehyde and iodine functional groups were prepared successfully, which could be further transformed into a wide range of compounds with potential applications in pharmaceutical chemistry and materials science.

Distal γ-C(sp3 )-H Olefination of Ketone Derivatives and Free Carboxylic Acids

Reported herein is the distal γ-C(sp3 )-H olefination of ketone derivatives and free carboxylic acids. Fine tuning of a previously reported imino-acid directing group and using the ligand combination of a mono-N-protected amino acid (MPAA) and an electron-deficient 2-pyridone were critical for the γ-C(sp3 )-H olefination of ketone substrates. In addition, MPAAs enabled the γ-C(sp3 )-H olefination of free carboxylic acids to form diverse six-membered lactones. Besides alkyl carboxylic acids, benzylic C(sp3 )-H bonds also could be functionalized to form 3,4-dihydroisocoumarin structures in a single step from 2-methyl benzoic acid derivatives. The utility of these protocols was demonstrated in large scale reactions and diversification of the γ-C(sp3 )-H olefinated products.

Pd(II)-Catalyzed Direct γ-C(sp3)-H Arylation between Free β2-Amino Esters and β3-Amino Esters and Aryl Iodides Using a Catalytic Transient Directing Group

Pd(II)-catalyzed direct γ-C(sp³)-H arylation coupling with free β²-amino esters and β³-amino esters using a commercially available catalytic transient directing group has been developed. This approach features high efficiency, broad substrate tolerance, easily accessible starting materials, and mild reaction conditions.

Transient imine directing groups for the C–H functionalisation of aldehydes, ketones and amines: an update 2018–2020

This review describes recent advances in C–H functionalisation using transient directing groups. Advances in directing group design, new bond forming methodologies, regio- and stereoselective processes, and new mechanistic insights are discussed.

Direct remote δ-C(sp2)–H olefination of β-aryl-substituted aliphatic aldehydes via palladium/enamine co-catalysis

Palladium-catalyzed direct remote δ-C(sp²)–H olefination of β-aryl-substituted aliphatic aldehydes has been achieved using a catalytic amount of secondary amine (n-Bu)₂NH as a co-catalyst.