Organocatalytic Enantioselective Synthesis of α-Fluoro-β-amino Acid Derivatives

Design, Preparation, and Implementation of Axially Chiral Benzotetramisoles as Lewis Base Catalysts for Asymmetric Cycloadditions

Developing novel catalysts with potent activity is of great importance in organocatalysis. In this study, we designed and prepared a new class of benzotetramisole Lewis base catalysts (AxBTM) that have both central and axial chirality. This unique feature of these catalysts results in a three-dimensional microenvironment with multi-layers of chirality. The performance of the developed catalysts was tested in a series of cycloaddition reactions. These included the AxBTM-catalyzed (2+2) cycloaddition between α-fluoro-α-aryl anhydride with imines or oxindoles, and the sequential gold/AxBTM-catalyzed (4+2) cycloaddition of enynamides with pentafluorophenyl esters. The interplay between axial and central chirality had a collaborative effect in regulating the stereochemistry in these cycloadditions, leading to high levels of stereoselectivity that would otherwise be challenging to achieve using conventional BTM catalysts. However, the (2+2) and (4+2) cycloadditions have different predilections for axial and central chirality combinations.

De-epimerizing DyKAT of β-lactones generated by isothiourea-catalysed enantioselective [2 + 2] cycloaddition

An enantioselective isothiourea-catalysed [2 + 2] cycloaddition of C(1)-ammonium enolates with pyrazol-4,5-diones is used to construct spirocyclic β-lactones in good yields, excellent enantioselectivity (99 : 1 er) but with modest diastereocontrol (typically 70 : 30 dr). Upon ring-opening with morpholine or alternative nucleophilic amines and alcohols β-hydroxyamide and β-hydroxyester products are generated with enhanced diastereocontrol (up to >95 : 5 dr). Control experiments show that stereoconvergence is observed in the ring-opening of diastereoisomeric β-lactones, leading to a single product (>95 : 5 dr, >99 : 1 er). Mechanistic studies and DFT analysis indicate a substrate controlled Dynamic Kinetic Asymmetric Transformation (DyKAT) involving epimerisation at C(3) of the β-lactone under the reaction conditions, coupled with a hydrogen bond-assisted nucleophilic addition to the Si-face of the β-lactone and stereodetermining ring-opening. The scope and limitations of a one-pot protocol consisting of isothiourea-catalysed enantio-determining [2 + 2] cycloaddition followed by diastereo-determining ring-opening are subsequently developed. Variation within the anhydride ammonium enolate precursor, as well as N(1) and C(3) within the pyrazol-4,5-dione scaffold is demonstrated, giving a range of functionalised β-hydroxyamides with high diastereo- and enantiocontrol (>20 examples, up to >95 : 5 dr and >99 : 1 er) via this DyKAT.

Enantioselective α-heterofunctionalization reactions of catalytically generated C1-Lewis base enolates

Chiral Lewis base (LB) organocatalysis has emerged as a powerful covalent catalysis concept which allows for highly selective asymmetric C-C and C-heteroatom bond formations. Considering significant recent progress in the development of strategies to access α-heterofunctionalized carboxylic acid derivatives under chiral LB catalysis, we wish to summarize the most significant concepts and advances in this field within this mini review now.

Isothiourea-Catalyzed Enantioselective Functionalisation of Glycine Schiff Base Aryl Esters via 1,6- and 1,4-Additions

The enantioselective α-functionalisation of glycine Schiff base aryl esters through isothiourea catalysis is successfully demonstrated for 1,6-additions to para-quinone methides (21 examples, up to 95:5 dr and 96:4 er) and 1,4-additions to methylene substituted dicarbonyl or disulfonyl Michael acceptors (17 examples, up to 98:2 er). This nucleophilic organocatalysis approach gives access to a range of α-functionalised α-amino acid derivatives and further transformations of the activated aryl ester group provide a straightforward entry to advanced amino acid-based esters, amides or thioesters.

A Desilylative Approach to Alkyl Substituted C(1)-Ammonium Enolates: Application in Enantioselective [2+2] Cycloadditions

The catalytic generation of C(1)-ammonium enolates from the corresponding α-silyl-α-alkyl substituted carboxylic acids using the isothiourea HyperBTM is reported. This desilylative approach grants access to α-unsubstituted and α-alkyl substituted C(1)-ammonium enolates, which are typically difficult to access through traditional methods reliant upon deprotonation. The scope and limitations of this process is established in enantioselective [2+2]-cycloaddition processes with perfluoroalkylketones (31 examples, up to 96 % yield and >99 : 1 er), as well as selective [2+2]-cycloaddition with trifluoromethyl enones (4 examples, up to 75 % yield and >99 : 1 er). Preliminary mechanistic studies indicate this process proceeds through an initial kinetic resolution of an in situ prepared (±)-α-silyl-α-alkyl substituted anhydride, while the reaction process exhibits overall pseudo zero-order kinetics.

Lewis Base Catalyzed Synthesis of Sulfur Heterocycles via the C1‐Pyridinium Enolate

While the addition of C1‐Lewis base enolates to carbonyls and related structures are well established, the related addition to thiocarbonyls compounds are unknown. Herein, we report a reaction cascade in which a C1‐pyridinium enolate undergos addition to dithioesters, trithiocarbonates and xanthates. The reaction provides access to a range of dihydrothiophenes and dihydrothiopyrans (28‐examples). Mechanistic investigations, including isolation of intermediates, electronic correlation, and kinetic isotope effect studies support the viability of an activated acid intermediate giving rise to the C1‐pyridinium enolate which undergoes turnover limiting cyclization. Subsequent formation of a β‐thiolactone regenerates the catalyst with loss of carbon oxysulfide providing the observed products.

Asymmetric oxidative Mannich reactions promoted by photocatalysis and electrochemistry

The asymmetric Mannich reaction is an essential method in contemporary organic chemistry. As a representative of clean and green synthesis methods, photochemical and electrochemical oxidation strategies have re-emerged in recent years, providing new ideas for asymmetric Mannich reactions. Numerous chiral β-amino carbonyl compounds have been accessed in satisfactory yields with excellent enantioselectivity via such novel asymmetric oxidative Mannich reactions. This minireview highlights plentiful advances in asymmetric oxidative Mannich reactions that rely on photoredox or anodic-oxidation and covers the literature from 2014 to date. Furthermore, the future development of this field is envisaged.

Isothiourea-catalysed enantioselective annulation of 2-aminobenzothiophenes with α,β-unsaturated anhydrides

An isothiourea-catalysed asymmetric Michael/lactamization cascade reaction of 2-aminobenzothiophenes and α,β-unsaturated anhydrides for the enantioselective synthesis of benzothienopiperidones with high stereoselectivities was developed.

Enantioselective Construction of Tertiary α-Alkyl Fluoride via BTM-Catalyzed Fluorination of α-Alkynyl-Substituted Acetic Acids

The isothiourea-catalyzed enantioselective construction of tertiary α-fluoro stereogenic centers has been demonstrated by using branched alkynyl-substituted acetic acids as starting materials, providing a broad range of optically active tertiary α-alkyl fluorides in high enantioselectivity (up to 97% ee). Furthermore, this methodology was proven to be scaled up to a Gram scale without loss of enantioselectivity.

Catalytic enantioselective synthesis of 1,4-dihydropyridines via the addition of C(1)-ammonium enolates to pyridinium salts

The regio- and stereoselective addition of C(1)-ammonium enolates - generated in situ from aryl esters and the isothiourea catalyst (R)-BTM - to pyridinium salts bearing an electron withdrawing substituent in the 3-position allows the synthesis of a range of enantioenriched 1,4-dihydropyridines. This represents the first organocatalytic approach to pyridine dearomatisation using pronucleophiles at the carboxylic acid oxidation level. Optimisation studies revealed a significant solvent dependency upon product enantioselectivity, with only toluene providing significant asymmetric induction. Using DABCO as a base also proved beneficial for product enantioselectivity, while investigations into the nature of the counterion showed that co-ordinating bromide or chloride substrates led to higher product er than the corresponding tetrafluoroborate or hexafluorophosphate. The scope and limitations of this process are developed, with enantioselective addition to 3-cyano- or 3-sulfonylpyridinium salts giving the corresponding 1,4-dihydropyridines (15 examples, up to 95 : 5 dr and 98 : 2 er).

Catalytic stereoselective Mannich-type reactions for construction of fluorinated compounds

For its unique role in developing and designing new bioactive materials and healthcare products, fluoro-organic compounds have attracted remarkable interest. Along with ever-increasing demand for a wider availability of fluorine-containing structural units, a large diversity of methods has been introduced to incorporate fluorine atoms specially in a stereoselective fashion. Among them, catalytic Mannich reaction can proceed with a broad variety of reactants and open clear paths for the synthesis of versatile amine synthons in the synthesis of natural product and pharmaceutical molecules. This review provides an overview of the employment of catalytic asymmetric Mannich reactions in the synthesis of fluorine-containing amine compounds and highlights the conceivable distinct mechanisms.

[2.2]Paracyclophane-Based Isothiourea-Catalyzed Highly Enantioselective α-Fluorination of Carboxylic Acids

Planar chiral [2.2]paracyclophane-based isothiourea catalysts have been prepared over a few simple steps in high yields. In the presence of these catalysts, highly efficient catalytic enantioselective fluorination of carboxylic acids has been accomplished, providing a broad range of optically active α-fluoroesters in high yield and excellent enantioselectivity.

Generation and Reactivity of C(1)-Ammonium Enolates by Using Isothiourea Catalysis

C(1)-Ammonium enolates are powerful, catalytically generated synthetic intermediates applied in the enantioselective α-functionalisation of carboxylic acid derivatives. This minireview describes the recent developments in the generation and application of C(1)-ammonium enolates from various precursors (carboxylic acids, anhydrides, acyl imidazoles, aryl esters, α-diazoketones, alkyl halides) using isothiourea Lewis base organocatalysts. Their synthetic utility in intra- and intermolecular enantioselective C-C and C-X bond forming processes on reaction with various electrophiles will be showcased utilising two distinct catalyst turnover approaches.

Catalytic asymmetric synthesis of quaternary trifluoromethyl α- to ε-amino acid derivatives via umpolung allylation/2-aza-Cope rearrangement

In this study, we developed an efficient Ir-catalyzed cascade umpolung allylation/2-aza-Cope rearrangement of tertiary α-trifluoromethyl α-amino acid derivatives for the preparation of a variety of quaternary α-trifluoromethyl α-amino acids in high yields with excellent enantioselectivities. The umpolung reactivity empowered by the activation of the key isatin-ketoimine moiety obviates the intractable enantioselectivity control in Pd-catalyzed asymmetric linear α-allylation. In combination with quasi parallel kinetic resolution or kinetic resolution, the generality of this method is further demonstrated by the first preparation of enantioenriched quaternary trifluoromethyl β-, γ-, δ- and ε-amino acid derivatives.

Insight into Isothiourea-Catalyzed Enantioselective Addition of Saturated Esters to Iminium Ions

The possible mechanisms and origin of the selectivities of isothiourea-catalyzed addition of saturated esters to iminium ions have been investigated by density functional theory. The favorable reaction pathway includes three stages: formation of an ammonium enolate intermediate, enantioselective addition of the ammonium enolate intermediate to the iminium ion, and dissociation of the catalyst to form the product. The enantioselective addition process is the stereoselectivity-determining step, while the chemoselectivity-determining step is included in the formation of the final product. The calculated energy barriers show that the chemoselectivity is thermodynamically controlled, and it depends on the polarities of the products and the nucleophilicities of the N atoms of the enamine reactant moieties of the intermediates. The origin of the stereoselectivity was investigated by non-covalent interaction analysis of the key transition states. Hydrogen bonding interactions were identified as the determining factor for controlling the stereoselectivity. The obtained insight will be valuable for rational design of novel Lewis base organocatalyst-promoted enantioselective addition reactions with special chemoselectivities.

Organocatalytic Enantioselective Mukaiyama-Mannich Reaction of Isatin-Derived Ketimines for the Synthesis of Oxindolyl-β3, 3 -Amino Acid Esters

Mukaiyama-Mannich reactions of ester enolate equivalents with aldimines have been elegantly used for the asymmetric synthesis of β-amino acids; nevertheless, the corresponding asymmetric reaction employing ketimines are unexplored. Herein, the first organocatalytic enantioselective Mukaiyama-Mannich reaction employing isatin-derived ketimines with unsubstituted silyl ketene acetals is disclosed towards the scalable synthesis of 2-oxoindolinyl-β^3, 3 -amino acid esters at room temperature with excellent enantioselectivities (ee >99.5 %). Ultra-low catalyst loadings (as low as 250 ppm) could be used for the quantitative product formation with high enantiopurity. The synthetic utility of this protocol has been showcased in the short formal synthesis of pharmaceutically demanded (+)-AG-041R, a potent gastrin/CCK-B receptor antagonist.

Development of a new bicyclic imidazole nucleophilic organocatalyst for direct enantioselective C-acylation

A new chiral nucleophilic organocatalyst bearing a 5,6,7,8-tetrahydroimidazo[1,2-a]pyridine skeleton has been developed.