A Reusable Polymeric Film for the Alternating Colorimetric Detection of a Nerve Agent Mimic and Ammonia Vapor with Sub-Parts-per-Million Sensitivity

Portable Sensing Probe for Real-Time Quantification of Ammonia in Blood Samples

The detection of ammonia levels in blood is critical for diagnosing and monitoring various medical conditions, including liver dysfunction and metabolic disorders. However, traditional diagnostic methods are slow and cumbersome, often involving multiple contact-based steps such as ammonia separation in alkali conditions followed by distillation or microdiffusion, leading to delays in diagnosis and treatment. Herein, we developed a colorimetric assay capable of rapid detection of ammonia in whole blood or plasma samples, utilizing 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)-oxidized cellulose nanocrystals (TCNC) coupled with gold nanoparticles (AuNPs). The basis of our assay relies on either (i) the interaction between the carboxylate group (-COO) of TEMPO and ammonium ions or (ii) the manipulation of AuNPs surface plasmon resonance (SPR) through the formation of Au(NH3)43+, which displaces a redox mediator, resazurin, resulting in observable multicolor displays at various concentrations of ammonia. The colorimetric assay exhibits a wide linear detection range for dissolved NH4+ (0.1-37 μM) with a low limit of detection (LOD) of 0.1 μM. Additionally, it effectively measures NH3(g) concentrations in the range of 0.5-144 μM. The fabricated electrochemical nose (E-nose) device demonstrates excellent analytical performance for plasma ammonia sensing (0.05-256 μM). Experimental results demonstrate a linear detection range suitable for clinical applications, with excellent correlation to standard laboratory methods, offering a practical solution for point-of-care (PoC) testing. We anticipate that this approach can be applied broadly to improve patient monitoring and treatment by providing immediate and accurate ammonia measurements in a clinical setting.

Development of toxic gas sensor from anthocyanin-embedded polycaprolactone-co-polylactic acid nanofibrous mat

The colorless ammonia gas has been a significant intermediate in the industrial sector. However, prolonged exposure to ammonia causes harmful effects to organs or even death. Herein, an environmentally friendly solid-state ammonia sensor was developed utilizing colorimetric polycaprolactone-co-polylactic acid nanofibrous membrane. Pomegranate (Punica granatum L.) peel contains anthocyanin (ACN) as a naturally occurring spectroscopic probe. A mordant (potassium aluminum sulfate) is used to immobilize the anthocyanin direct dyestuff inside nanofibers, generating mordant/anthocyanin (M/ACN) coordinated complex nanoparticles. When exposed to ammonia, the color change of anthocyanin-encapsulated polycaprolactone-co-polylactic acid nanofibrous membrane from purple to transparent was examined by absorbance spectra and CIE Lab color parameters. With a quick colorimetric shift, the polycaprolactone-co-polylactic acid fabric exhibits a detection limit of 5-150 mg/L. The absorbance spectra showed a hypsochromic shift when exposed to ammonia, displaying an absorption shift from 559 nm to 391 nm with an isosbestic point of 448 nm. Scanning electron microscopy (SEM) images revealed that the polycaprolactone-co-polylactic acid nanofibers had a diameter of 75-125 nm, whereas transmission electron microscopy (TEM) images revealed that M/ACN nanoparticles exhibited diameters of 10-20 nm.

Coherent Modulation of the Aggregation Behavior and Intramolecular Charge Transfer in Small Molecule Probes for Sensitive and Long-term Nerve Agent Monitoring

Aggregation-induced emission (AIE) shows promising performance in chemical sensing relying on the change of the emission behavior of the probe molecule monomers to the aggregated product. However, whether the response contrast could be further boosted by utilizing the emission property of the aggregated probe and the aggregated product remains a big challenge. Here, an exciting AIE probe regulation strategy was proposed by coherently modulating the aggregation behavior and the intramolecular charge transfer (ICT) property of the probes and thus an aggregated-to-aggregated colorimetric-fluorescent dual-mode detection was achieved. The blue emissive film obtained with the optimal AIE probe has been proven to be effective to recognize the vapor of nerve agent analog DCP in air by emitting a sharp green fluorescence. In addition, a porous polymer-based wet sensing chip loaded with the probe enables the immediate response to DCP vapor with a limit of detection (LOD) of 1.7 ppb, and it was further integrated into a wearable watch device for long-term monitoring of DCP vapor up to two weeks. We expect the present probe design strategy would greatly deepen the AIE-based science and provide new insights for long-term monitoring sensors toward trace hazardous substances.

A pyrene-based chromo-fluorogenic probe for specific detection of sarin gas mimic, diethylchlorophosphate

Nerve agents are becoming serious issues for the healthy and sustainable environment of modern civilization. Therefore, its detection and degradation are of paramount importance to the scientific community. In the present contribution, we have introduced a chromo-fluorogenic pyrene-based  probe, (E)-2-methoxy-3-(pyren-1-ylimino)-3,8a-dihydro-2H-chromen-4-ol (PMCO) to detect sarin stimulant diethylchlorophosphate (DCP) in solution and gaseous phases. On inserting DCP in PMCO solution, a visual colorimetric change from yellow to clear colourless in daylight and highly intensified blue fluorescence was observed instantly under a 365 nm portable UV lamp light. PMCO has outstanding selectivity and high sensitivity with a limit of detection of 1.32 μM in dimethyl sulfoxide (DMSO) medium and 77.5 nM in 20% H2O-DMSO. A handy strained paper strip-based experiment was demonstrated to recognize DCP in a mixture of similar toxic analytes. A dip-stick experiment was performed to identify DCP vapour, and may be used as an effective photonic tool. We also demonstrated real sample analysis utilizing different DCP-spiked water samples and validating DCP detection even in various types of soils such as sand, field, and mud. Therefore, this present study provides an effective chemosensor for instant and on-site detection of toxic nerve agents in dangerous circumstances.

Self-Assembled and Polymerized Hierarchical Nanostructure Films of Cyanostilbene-Based Reactive AIEgens for Smart Chemosensors

For the development of acid-responsive advanced fluorescent films with a 2D nanostructure, a pyridyl cyanostilbene-based AIEgen (PCRM) is newly synthesized. The synthesized PCRM exhibits aggregation-induced emission (AIE) and responds reversibly to acid and base stimuli. To fabricate the nanoporous polymer-stabilized film, PCRM and 4-(octyloxy)benzoic acid (8OB) are complexed in a 1:1 ratio through hydrogen bonding. The PCRM-8OB complex with a smectic mesophase is uniaxially oriented at first and photopolymerized with a crosslinker. By subsequently removing 8OB in an alkaline solution, nanopores are generated in the self-assembled and polymerized hierarchical 2D nanostructure film. The prepared nanoporous fluorescent films exhibit not only the reversible response to acid and base stimuli but also mechanical and chemical robustness. Since the nanoporous fluorescent films have different sensitivities to trifluoroacetic acid (TFA) depending on the molecular orientation in the film, advanced acid vapor sensors that can display the risk level according to the concentration of TFA are demonstrated. Reactive AIEgens-based hierarchical nanostructure films with nanopores fabricated by a subsequent process of self-assembly, polymerization, and etching can open a new door for the development of advanced chemosensors.

Dual-State Fluorescent Probe for Ultrafast and Sensitive Detection of Nerve Agent Simulants in Solution and Vapor

The development of fluorescent probes for detecting nerve agents has been the main concern focus of research because of their lethal toxicity for humans. Herein, a probe (PQSP) based on the quinoxalinone unit and the styrene pyridine group was synthesized and could visually detect a sarin simulant diethyl chlorophosphate (DCP) with excellent sensing properties in solution and solid states. Interestingly, PQSP showed an apparent intramolecular charge-transfer process by catalytic protonation after reacting with DCP in methanol, accompanied with the aggregation recombination effect. The sensing process was also verified by nuclear magnetic resonance spectra, scanning electron microscopy, and theoretical calculations. In addition, the papered test strips of loading probe PQSP exhibited an ultrafast response time within 3 s and high sensitivity with a limit of detection of 3 ppb for the detection of DCP vapor. Therefore, this research provides a designed strategy for developing the probes with dual-state emission fluorescence in solution and solid states for detecting DCP sensitively and rapidly, which can be fabricated as chemosensors to visually detect nerve agents in practice.

Recent advances in fluorescent and colorimetric chemosensors for the detection of chemical warfare agents: a legacy of the 21st century

Chemical warfare agents (CWAs) are among the most prominent threats to the human population, our peace, and social stability. Therefore, their detection and quantification are of utmost importance to ensure the security and protection of mankind. In recent years, significant developments have been made in supramolecular chemistry, analytical chemistry, and molecular sensors, which have improved our capability to detect CWAs. Fluorescent and colorimetric chemosensors are attractive tools that allow the selective, sensitive, cheap, portable, and real-time analysis of the potential presence of CWAs, where suitable combinations of selective recognition and transduction can be integrated. In this review, we provide a detailed discussion on recently reported molecular sensors with a specific focus on the sensing of each class of CWAs such as nerve agents, blister agents, blood agents, and other toxicants. We will also discuss the current technology used by military forces, and these discussions will include the type of instrumentation and established protocols. Finally, we will conclude this review with our outlook on the limitations and challenges in the area and summarize the potential of promising avenues for this field.

Photonic Liquid Crystal Polymer Absorbent for Immobilization and Detection of Gaseous Nerve Agent Simulants

Detection and sequestration of chemical warfare agents (CWAs), such as poisonous organophosphates, are highly desirable for both personal security and environmental protection. However, both sensing and absorption in a single device have been rarely reported. In this study, we describe a photonic absorbent based on a cholesteric liquid crystal polymer as a dual sensing and decontamination device for gas-type CWAs. Dimethyl methylphosphonate (DMMP) was used as a simulant compound. A blue reflective photonic polymer was fabricated that was able to detect DMMP vapor through absorption. Hydrogen bond interactions between DMMP and mesogenic carboxylic groups of the polymer allow selectivity and capture. A distinct optical change of the film from blue to bright green indicates the absorption of DMMP vapor molecules and confirms when full absorption of the polymer is achieved. The diffusion of DMMP vapor into the material was observed by the formation of a sharp boundary between swollen and unswollen material, as evidenced by scanning electron microscopy images and the structural color changes. In ambient conditions, DMMP molecules are retained in the photonic absorbent without release to the environment. Heating above approximately 60 °C releases the absorbed DMMP, leading to a reusable optical device. These results confirm the ability of photonic polymers to sense and immobilize dangerous vapor, paving the way for the realization of simple, battery-free optical devices able to simultaneously warn and protect.

Killing two birds with one stone: phosphorylation by a tabun mimic and subsequent capture of cyanide using a single fluorescent chemodosimeter

In the presence of the tabun mimic diethylcyanophosphonate (DECP), a fluorescent bifunctional coumarin–enamine chemodosimeter is first phosphorylated and subsequently attacked by the released cyanide ions.

Chromogenic Anticounterfeit and Security Papers: An Easy and Effective Approach

The synthesis and preparation of 12 chromogenic polymers used to build an intelligent label for security paper applications are described. The process involves coating paper sheets with the polymers. Depending on the number of different polymers used in a combinatory way, a maximum of 12¹² combinations is possible, thus creating a matrix that is practically impossible to counterfeit. Currently, most anticounterfeiting proposals for paper-based packaging and documents involve some sort of verification under ultraviolet radiation, and the requirement of additional equipment often relegates the end-user to a passive role. In contrast, in our approach, the combination of sensory polymers in an array gives rise to an invisible label, i.e., an owner cryptographic key, which becomes visible upon scattering a nitrite solution (e.g., spraying or using an impregnated foam roller) over the printed label on the security paper. For this purpose, a monomer containing an aromatic primary amino group and another with an activated aromatic ring are covalently bonded to a polymer with high affinity toward paper, consisting essentially of units of methyl methacrylate and 1-vinyl-2-pyrrolidone. Subsequently, the paper samples are coated with the resulting sensory chromogenic polymer. By spraying, painting, or staining an aqueous acid solution of NaNO₂ (at least 1.20 g/L) and the chromogenic polymers, a well-defined color appears, because of the formation of an azo compound. This process provides users with a quick and facile authentication method without additional equipment and without affecting paper strength.

Rhodamine phenol-based fluorescent probe for the visual detection of GB and its simulant DCP

Rhodamine phenol-based fluorescent probes have been synthesized. The probe RBNP demonstrates a rapid response and extreme low limit detection to diethylchlorophosphate and can rapidly and visually detect a real nerve agent GB in vapor.

"Metal-Free" Fluorescent Supramolecular Assemblies for Distinct Detection of Organophosphate/Organochlorine Pesticides

The "metal-free", easy-to-prepare fluorescent supramolecular assemblies based on anthracene/perylene bisamide (PBI) derivatives have been developed for the distinct detection of organophosphate (CPF) and organochlorine (DCN) pesticides in aqueous media. The supramolecular assemblies of anthracene derivative show rapid and highly selective "on-on" response toward organophosphate (CPF), which is attributed to the formation of CPF-induced formation of "closely packed" assemblies. A detection limit in the nanomolar range is observed for CPF. On the other hand, the inner filter effect is proposed as the mechanism for the "on-off" detection of DCN using supramolecular assemblies of the anthracene derivative. This is the first report on the development of fluorescent materials having the potential to differentiate between organophosphate and organochlorine pesticides. The assemblies of anthracene derivative 2 also act as "enzyme mimic" as organophosphate pesticide show a preferential affinity for assemblies of derivative 2 over acetylcholinesterase enzyme. Further, the real-time applications of supramolecular assemblies have also been explored for the detection of CPF and DCN in spiked water and in agricultural products such as grapes and apples.