PEG@ZIF-8/PVDF Nanocomposite Membrane for Efficient Pervaporation Desulfurization via a Layer-by-Layer Technology

Preparation and characterization of thymol-loaded ZIF-8/κ-carrangeenan/Zein composite film as active food packaging with enhanced functional properties for blueberry preservation

Polysaccharide-protein-based composite films are promising for food packaging, but interfacial incompatibility between hydrophilic biopolymers and hydrophobic proteins limits their use. In this study, a new thymol-loaded zeolitic imidazolate framework-8/κ-carrageenan/Zein composite film was developed for blueberry preservation. The film exhibited excellent physical properties with a thickness of 0.052 ± 0.0001 mm, a high tensile strength of 40.631 ± 1.527 MPa, an elongation at break of 21.223 ± 1.018 %, and a reduced water vapor permeability of (0.764 ± 0.166) × 10-8 kg·m·m-2·s-1·Pa-1. The incorporation of thymol and ZIF-8 improved the film's microstructure and interfacial compatibility between κ-carrageenan and Zein. Thymol release was pH-dependent and sustained with a cumulative release of 91.959 ± 0.454 % over 36 h at pH 4.5. Biological testing revealed significant antibacterial properties with survival rates of 0.002 ± 0.002 % against Staphylococcus aureus and 5.973 ± 0.307 % against Escherichia coli, and antioxidant capacity with DPPH and ABTS radical scavenging rates of 75.60 ± 0.53 % and 61.49 ± 1.19 %, respectively. The film showed good biodegradability and extended blueberry shelf life by 9 days. This composite film offers enhanced mechanical properties, controlled release, and bioactivity, showing great potential as active food packaging for fruit preservation.

Multiporous ZIF-8 carbon/cellulose composite beads: Highly efficient and scalable adsorbents for water treatment

Metal-organic framework (MOF) particles are one of the most promising adsorbents for removing organic contaminants from wastewater. However, powder-type MOF particles face challenges in terms of utilization and recovery. In this study, a novel bead-type adsorbent was prepared using activated carbon based on the zeolitic imidazolate framework-8 (AC-ZIF-8) and a regenerated cellulose hydrogel for dye removal. AC-ZIF-8 particles with a large surface area were obtained by carbonization and chemical activation with KOH. The AC-ZIF-8 powders were efficiently immobilized in hydrophilic cellulose hydrogel beads via cellulose dissolution/regeneration. The prepared AC-ZIF-8/cellulose hydrogel (AC-ZIF-8/CH) composite beads exhibit a large specific surface area of 1412.8 m2/g and an excellent maximum adsorption capacity of 565.13 mg/g for Rhodamine B (RhB). Moreover, the AC-ZIF-8/CH beads were effective over a wide range of pH, temperatures and for different types of dyes. These composite beads also offer economic benefits through desorption of dyes for recycling. The AC-ZIF-8/CH beads can be produced in substantial amounts and used as fillers in a fixed-bed column system, which can purify the continuous inflow of dye solutions. These findings suggest that our simple approach for preparing high-performance adsorbent beads will broaden the application of dye adsorbents, oil-water separation, and catalysts.

Defect Healing of Micro/Nanocrystals via the Coordination Competition of Rare Earth in Crystal Engineering

Defect engineering has been generally observed and utilized in crystal materials including metal oxides, metal-organic frameworks, and so on; however, how to relate the defect formation and crystallization process is needed to be revealed clearly, and how to heal the defect is a big challenge. Herein, based on the new coordination complex (HNU-53), the crystal defects were created by increasing the reaction time and crystal size. Following the crystal growth process, the crystal color centers were simultaneously generated, resulting in fluorescence quenching. To heal the defect, the crystal growth was controlled by the introduction of rare earth ions. With the coordination competition of rare earth ions, the crystal defects were reduced and recovery of fluorescence emission was achieved.

Effect of MoS2 Yolk-Shell Nanostructure on the Thiophene Separation Performance of PEG Membrane

Constructing facilitated transport based on π-complexation has been drawing more and more attention in mixed matrix membranes (MMMs) for pervaporative desulfurization. Herein, a unique molybdenum disulfide (MoS2) yolk-shell nanostructure (MYNS) was prepared and incorporated into the polyethylene glycol (PEG) matrix to fabricate MMMs for model gasoline desulfurization by PV. Moreover, the effects of MYNS content, feed sulfur concentration, and feed temperature on the performance of PEG/MYNS MMMs were evaluated. It was found that there is good interfacial compatibility between the MYNS filler and the PEG matrix, and the resultant MMMs show enhanced swelling resistance against thiophene. The PV results revealed that the as-fabricated MMMs are thiophene-selective, and their desulfurization performance in the pervaporative removal of thiophene from n-octane is remarkably evaluated due to the addition of MYNS. The MMMs display the highest sulfur enrichment factor of 4.02 with an associated permeation flux of 2587 g·m−2·h−1 with the MYNS loading of 3 wt. % when carrying out in an n-octane and thiophene (500 μg·g−1) mixture at 343 K. Furthermore, a consistent increment in the permeation flux accompanied with a continuous reduction in the enrichment factor was observed with increasing the feed sulfur concentration and feed temperature. This work may offer great potential for practical gasoline desulfurization applications.

Investigation on the catalytic behavior of a novel thulium-organic framework with a planar tetranuclear {Tm4} cluster as the active center for chemical CO2 fixation

Herein, the exquisite combination of coplanar [Tm₄(CO₂)₁₀(μ₃-OH)₂(μ₂-HCO₂)(OH₂)₂] clusters ({Tm₄}) and structure-oriented functional BDCP^5- leads to the highly robust nanoporous {Tm₄}-organic framework {(Me₂NH₂)[Tm₄(BDCP)₂(μ₃-OH)₂(μ₂-HCO₂)(H₂O)₂]·7DMF·5H₂O}_n (NUC-37, H₅BDCP = 2,6-bis(2,4-dicarboxylphenyl)-4-(4-carboxylphenyl)pyridine). To the best of our knowledge, NUC-37 is the first anionic {Ln₄}-based three-dimensional framework with embedded hierarchical microporous and nanoporous channels, among which each larger one is shaped by six rows of coplanar {Tm₄} clusters and characterized by plentiful coexisting Lewis acid-base sites on the inner wall including open Tm^III sites, N_pyridine atoms, μ₃-OH and μ₂-HCO₂. Catalytic experimental studies exhibit that NUC-37 possesses highly selective catalytic activity on the cycloaddition of epoxides with CO₂ as well as high recyclability under gentle conditions, which should be ascribed to its nanoscale channels, rich bifunctional active sites, and stable physicochemical properties. This work offers an effective means for synthesizing productive cluster-based Ln-MOF catalysts by employing structure-oriented ligands and controlling the solvothermal reaction conditions.

One Robust Microporous TmIII-Organic Framework for Highly Catalytic Activity on Chemical CO2 Fixation and Knoevenagel Condensation

In terms of documented references, multifunctional MOFs with high catalytic performance could be constructed from the combination of metal cations and polycarboxyl-pyridine ligands, which could efficiently endow crystallized porous frameworks with the coexisting Lewis acid-base properties. Thus, by employing a ligand-directed synthetic strategy, the exquisite combination of wave-like inorganic chains of [Tm(CO₂)₃(OH₂)]_n and mononuclear units of [Tm(CO₂)₄(OH₂)₂] with the aid of the specially designed ligand of 2,6-bis(2,4-dicarboxylphenyl)-4-(4-carboxylphenyl)pyridine (H₅BDCP) generates one highly robust microporous framework of {(Me₂NH₂)[Tm₃(BDCP)₂)(H₂O)₃]·4DMF·H₂O}_n (simplified as NUC-25), which contains near-rectangular nanochannels and large solvent-residing voids. Furthermore, the activated state of NUC-25 with the removal of associated water molecules is a rarely reported bifunctional heterogeneous catalyst due to the coexistence of Lewis acid-base sites including 6-coordinated Tm³⁺ ions, uncoordinated carboxyl oxygen atoms, and N_pyridine atoms. Just as expected, NUC-25 exhibits greatly high catalytic activity for the cycloaddition reaction of epoxides with CO₂ into alkyl cyclic carbonates under bland solvent-free conditions, which should be ascribed to the polarity of nitrogen-containing pyridine heterocycles as Lewis base sites on the inner surface of nano-caged voids except for recognized Lewis acid sites of rare earth cations. Moreover, the excellent pore-size-dependent catalytic property for Knoevenagel condensation reactions confirms that NUC-25 can be viewed as a recyclable bifunctional heterogeneous catalyst. Therefore, these results strongly demonstrate that microporous MOFs assembled from pre-designed polycarboxyl-heterocyclic ligands display better catalytic performance not only for chemical CO₂ fixation but also for Knoevenagel condensation reactions.

Highly Robust 3s-3d {CaZn}-Organic Framework for Excellent Catalytic Performance on Chemical Fixation of CO2 and Knoevenagel Condensation Reaction

In terms of ligand-directed synthetic strategy, multifunctional metal-organic frameworks (MOFs) could be assembled by employing organic ligands with nitrogen-containing heterocycles, which could serve as Lewis base sites in crystallized porous frameworks. Here, the acidic one-pot hydrothermal reaction of CaCl₂, Zn(NO₃)₂, and 2,4,6-tri(2,4-dicarboxyphenyl)pyridine (H₆TDP) generates one robust honeycomb-shaped double-walled material of {[(CH₃)₂NH₂]₂[CaZn(TDP)(H₂O)]·3DMF·3H₂O}_n (NUC-21), which has the excellent physicochemical characteristics of nanoscopic channels, high porosity (58.3%), large specific surface area, and high heat/water-resisting property. To the best of our knowledge, this is the first 3s-3d dinuclear [CaZn(CO₂)₆(OH₂)]-based nanoporous host framework, whose activated state possesses the coexistence of Lewis acid-base sites including four-coordinated Zn²⁺ ions, four-coordinated Ca²⁺ ions, uncoordinated carboxyl oxygen atoms, and N_pyridine atoms. As expected, because of the coexistence of Lewis acid-base nature, desolvated NUC-21 displays satisfactory catalytic activity on the chemical cycloaddition of various epoxides with CO₂ into the corresponding alkyl carbonates under comparatively mild conditions. Furthermore, the efficient conversion of benzaldehydes and malononitrile confirms that NUC-21 is simultaneously a bifunctional heterogeneous catalyst for Knoevenagel condensation reactions. Hence, the achievements broaden the way for assembling nanoporous multifunctional MOFs by employing ligand-directed synthetic strategy, which can accelerate the transformation from simple structural research to socially demanding applications.

Impacts of Sulfuric Acid on the Stability and Separation Performance of Polymeric PVDF-Based Membranes at Mild and High Concentrations: An Experimental Study

This study investigated the effects of an aqueous acidic solution at typical concentrations on polymeric polyvinylidene fluoride (PVDF)-based membranes. Flat-sheet PVDF-based membranes were completely embedded in sulfuric acid at varying concentrations. The effect of the acid concentration after a prolonged exposure time on the chemical, mechanical and physical properties of the membrane were checked via FE-SEM, EDX (Energy-Dispersive Spectrometer), FTIR, XRD, tensile strength, zeta potential, contact angle, porosity, pure water flux measurement and visual observation. The result reveals prompt initiation of reaction between the PVDF membrane and sulfuric acid, even at a mild concentration. As the exposure time extends with increasing concentration, the change in chemical and mechanical properties become more pronounced, especially in the morphology, although this was not really noticeable in either the crystalline phase or the functional group analyses. The ultimate mechanical strength decreased from 46.18 ± 0.65 to 32.39 ± 0.22 MPa, while the hydrophilicity was enhanced due to enlargement of the pores. The flux at the highest concentration and exposure period increased by 2.3 times that of the neat membrane, while the BSA (Bovine Serum Albumin) rejection dropped by 55%. Similar to in an alkaline environment, the stability and performance of the PVDF-based membrane analyzed in this study manifested general deterioration.

Ultra-low pressure cellulose-based nanofiltration membrane fabricated on layer-by-layer assembly for efficient sodium chloride removal

Cellulose is a renewable, biodegradable, biocompatible, and sustainable material. A bamboo cellulose-based nanofiltration membrane (LBL-NF-CS/BCM) was prepared with a combination of layer-by-layer assembly and spraying methods. The chemical structure, morphology, and surface charge of the resultant LBL-NF-CS/BCM composite membranes were characterized based on Thermo Gravimetric Analysis (TGA), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), and X-ray Photoelectron Spectroscopy Scanning (XPS). The nanofiltration performance of the LBL-NF-CS/BCM composite membranes was evaluated using 500 ppm NaCl solutions under 0.3 MPa pressure. It was found that the LBL-NF-CS/BCM composite membranes had a rejection rate of about 36.11 % against a 500 ppm NaCl solution under the conditions tested, and membrane flux of about 12.08 L/(m² h) was reached. The combined layer-by-layer assembly and spraying provides a scalable and convenient process concept for nanofiltration membrane fabrication.

Integration of Cd:ZnS QDs into ZIF-8 for enhanced selectivity toward Cu2+ detection

Cd:ZnS QDs were integrated into ZIF-8 that could specifically interact with Cu²⁺ for enhanced selectivity toward Cu²⁺ detection.